Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Documentation

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to OSHA HazCom and Federal Standard No. 313 to identify hazardous components within materials used by the Department of Defense, prepare comprehensive Safety Data Sheets, and ensure accurate hazard labeling is submitted for compliance. All documentation must be meticulously prepared to meet federal safety and communication standards, with a focus on accurate hazard classification and transparent dissemination of chemical risks to personnel. The work is tied directly to DoD operations at the Anniston, Alabama, location with a ZIP code of 36201-4199, and must be completed under the NAICS code 541620, which pertains to scientific and technical consulting services. The solicitation is designated as a subcontract with a response deadline of August 10, 2026, and was posted on July 30, 2026. While no set-aside type is specified, the requirement emphasizes regulatory precision and timely submission of hazard documentation to support safe handling and transport of hazardous materials within military supply chains. The performance location is clearly defined, and contractors must ensure all deliverables align with federal mandates to avoid noncompliance risks. The contract is accessible via the DIBBS platform for further details and submission procedures.

General Info

Comply with OSHA HazCom and Federal Standard 313 for DoD hazard labeling and SDS at Anniston, AL, by August 10, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

ANNISTON, AL, 36201-4199, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous components, prepare SDS, and submit hazard labels per OSHA HazCom and Federal Standard No. 313 for DoD compliance.

Similar Contracts

Same NAICS industry code

Environment and Protected Areas - Request for Proposal - Environmental Capacity Assessment of the Muskeg River Environment and Protected Areas (EPA)

Solicitation # AB-2026-05471

The project seeks to evaluate the environmental capacity of the Muskeg River watershed to accommodate releases of non-process affected water from oil sands mining and aggregate extraction activities. This includes surface runoff, muskeg and aggregate dewatering, aquifer depressurization, and other water sources unrelated to industrial bitumen extraction. The assessment will analyze historical and current hydrological conditions and water quality data for the Muskeg River and its tributaries, alongside known discharge rates and characteristics of existing industrial releases permitted under EPEA regulations. Ambient monitoring data and community-based observations will also be integrated to inform a robust understanding of cumulative impacts. The evaluation will focus on potential consequences to the river system’s hydrological integrity and water quality, ensuring a comprehensive view of environmental stressors. Findings will be communicated to Indigenous communities, industry stakeholders, and the public upon completion.

Environment and Protected Areas

POSTED

about 10 hours ago

DEADLINE

RFP 27-2032 Open Space and Recreation Plan Update

Solicitation # BD-27-1255-PL175-KR141-131915

Concord is seeking qualified consultants to update the 2015 Open Space and Recreation Plan in accordance with guidelines from the Massachusetts Executive Office of Energy and Environmental Affairs through the Division of Conservation Services. The scope of work requires comprehensive revisions to all sections of the plan, ensuring alignment with current state standards and community needs. Proposals must be submitted as sealed written responses by the deadline of August 26, 2026, and are solicited under RFP 27-2032 with solicitation number BD-27-1255-PL175-KR141-131915. The solicitation was posted on July 31, 2026, and is managed by the Planning Department of the Commonwealth of Massachusetts. All work is to be performed in Concord, with correspondence and submissions directed to the office located at Keyes Rd, Concord, MA 01742. Ryan Ferrara is the primary point of contact for inquiries regarding the proposal process.

PL175 - Planning Department

POSTED

about 20 hours ago

DEADLINE

Post-Construction National Pollutant Discharge Elimination System (NPDES) Construction General Permit (CGP) Compliance Services

Solicitation # 69056726Q000032

This contract is a combined synopsis and solicitation issued as a Request for Quotation (RFQ) under FAR 12.201-1 for Post-Construction National Pollutant Discharge Elimination System (NPDES) Construction General Permit (CGP) Compliance Services, exclusively set aside for small businesses. The solicitation number is 69056726Q000032, issued by the U.S. Department of Transportation’s Federal Highway Administration, Western Federal Lands Division based in Vancouver, WA, with performance expected across federal highway projects in the Western Federal Lands region. The period of performance runs from the date of award through September 30, 2027, and responses are due by August 6, 2026. Offerors must be certified small businesses in SAM.gov, with valid Unique Entity Identifiers and CAGE codes, and must comply with all applicable socioeconomic representations under FAR 52.219-1. The acquisition is evaluated under a Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is determined first based on compliance with requirements, personnel qualifications, and past experience, and then the lowest-priced technically acceptable offer is selected without trade-offs. The scope of work requires comprehensive post-construction environmental compliance services under the NPDES CGP, including implementation and management of erosion and sediment control measures, stormwater pollution prevention, and all associated documentation such as an Erosion and Sediment Control Plan (126 pages), as-built reports, training records, and ICT deliverables meeting Section 508 accessibility standards. Required submissions include a Price Schedule, Past Experience Submission, Past Performance Questionnaire, and the Department of Labor’s Service Contract Act Wage Determination, all in specific file formats and within strict page and formatting limits. Non-compliant submissions may be rejected outright. All contracts will be governed by a robust set of FAR clauses including Service Contract Labor Standards, Equal Opportunity, Combating Trafficking in Persons with Alternate I, Privacy Training with Alternate I, Security Prohibitions and Requirements with Alternates, and Accelerated Payments to Small Business Subcontractors. Invoicing must be performed exclusively through the Delphi e-Invoicing system using login.gov credentials, with no acceptance of fax, email, or scanned invoices. The government conducts inspections at the project location based on ESCP compliance metrics like pH accuracy and turbidity levels. No contract value is specified in the solicitation as the pricing line item is

690567 Western Federal Lands Division

POSTED

about 22 hours ago

DEADLINE

NM MODEL FIELD VALIDATION

Solicitation # 140L1726Q0029

The Bureau of Land Management is soliciting bids under a total small business set aside for environmental consulting services to conduct botanical surveys in New Mexico as part of a field validation effort to refine habitat suitability models for decision making. This effort will be executed through a firm-fixed-price call against the USDA-USFS Land Management Integrated Services Blanket Purchase Agreement, with all associated terms and conditions applicable unless modified. The contract is governed by Part 12 procedures for commercial services, and service contract labor standards apply to work performed in Eddy and San Juan counties. Offerors must be actively registered on SAM.gov, and past performance will be evaluated through SAM.gov and CPARS.gov to determine responsibility. The NAICS code is 541620 with a maximum total value of $19 million, reserved exclusively for small businesses. Proposals must be submitted in two parts: Non-price factors and a pricing proposal, sent to scott_voigt@ios.doi.gov no later than August 17, 2026. Questions must be directed to the same email by August 26, 2026, and responses will be issued via RFQ amendments to all vendors. All quotations must remain valid for at least 120 days. Payment terms adhere to the 14-day prompt pay standard via IPP.gov, and progress payments are permitted. The work is to be performed in New Mexico, with the contracting office located in Lakewood, Colorado. Late submissions will not be accepted, and no fees should be paid for SAM.gov registration assistance—free support is available through local APEX Accelerators.

Colorado State Office

POSTED

about 22 hours ago

DEADLINE

Amargosa Road and Palmetto Way Industrial Warehouse Building

Solicitation # forecast_f1b35373-7709-4009-ac69-f2e07323ec3f

City of Hesperia

POSTED

DEADLINE

General Plan Update, Zoning Code and Map Amendment, and Climate Action and Adaptation Plan (CAAP)The City of Lake Elsinore is advancing a comprehensive update to its land use and environmental planning framework through the General Plan Update, Zoning Code and Map Amendment, and Climate Action and Adaptation Plan. The General Plan Update builds upon the 2011 comprehensive plan and the 2022 Housing Element, aligning with state statutory mandates and the 2023 General Plan Guidelines to guide future development, coordinate with regional planning initiatives, and establish strategies for reducing greenhouse gas emissions and addressing climate change impacts. The associated Environmental Impact Report evaluates each of the seven elements of the updated plan to ensure compliance and coherence. Simultaneously, the Zoning Code and Map Amendment will revise the city’s zoning regulations and map to fully implement the policies and land use designations outlined in the General Plan, ensuring regulatory alignment with the city’s long-term vision. The Climate Action and Adaptation Plan serves as the strategic backbone for climate resilience, providing a baseline assessment of current greenhouse gas emissions, forecasting future emissions based on projected growth, setting measurable reduction targets, and outlining specific adaptation measures to mitigate identified climate hazards. Together, these components form an integrated approach to sustainable development, environmental protection, and community preparedness in the face of a changing climate.

City of Lake Elsinore

POSTED

DEADLINE

Entrada South and Valencia Commerce Center (VCC) Project

Solicitation # 2000011025

Los Angeles County Regional Planning

POSTED

DEADLINE

Environmental Determination (ED23-180) Minor Use Permit / Coastal Development Permit (C-DRC2023-00041)The project, located at 750 Hearst Castle Road approximately five miles north of San Simeon in the Coastal Zone and North Coast Planning Area, seeks approval for a phased development under a Minor Use Permit and Coastal Development Permit to install modular office structures and associated infrastructure on a 132-acre parcel designated for Recreation use. Phase One includes the construction of two new modular offices totaling approximately 5,760 square feet, a 1,300-square-foot concrete and gravel pad预留 for a future third modular unit, two ADA-compliant parking spaces with walkways, two 10,000-gallon septic holding tanks, trenching for 1,500 feet of electrical conduit and related equipment, and 420 feet of wastewater drain pipe with water supply connections. General site improvements will support these additions, and the work will result in approximately 7,500 square feet of total ground disturbance. Phase Two will involve installing a third modular office of about 1,152 square feet with minor associated improvements. The project requires the removal of six Coast Live Oak trees and includes utility stub-outs and appurtenances to support current and future development. The project has undergone environmental review under Environmental Determination ED23-180 and is part of a larger regulatory framework managed by San Luis Obispo County. The planning and permitting authority rests with the county’s land use department, with Dane Mueller serving as the primary point of contact and Doug Barker acting as an agent representing the California Department of Parks and Recreation. The notice was posted on July 31, 2026, and the project falls within the coastal jurisdiction where development is subject to stringent environmental and land use controls. All work is constrained to the specific parcel at 93452, and no additional site expansions or structural additions beyond the described phases are contemplated under this permit application. The development reflects a modest expansion intended to support operational needs within an ecologically sensitive coastal environment.

San Luis Obispo County

POSTED

DEADLINE

Iron Lofts Mixed-Use Residential DevelopmentThe Iron Lofts Mixed-Use Residential Development project, located at 3596 Commerce Street in Riverside, California, is a land use entitlement process led by Darrin Olson of Iron Lofts, LLC, to enable the construction of a development containing 291 residential units and nine live/work units on a 7.03-acre site. The project requires six distinct approvals from the City of Riverside: a General Plan Amendment to change the land use designation from Business/Office Park to Mixed Use – Urban; a Zoning Code Amendment to rezone the property from Business and Manufacturing Park with Specific Plan and Cultural Resources overlays to Mixed Use – Urban with the same overlays; a Specific Plan Amendment to expand the Mixed Use Marketplace Sub Area to include the subject property; a Tentative Tract Map to consolidate twelve parcels into one, dedicate new right-of-way, and vacate portions of an alley and Sixth Street; a Site Plan Review for the proposed development layout; and a Certificate of Appropriateness to ensure infill construction complies with historic district standards, particularly regarding integration of a Structure of Merit within the Seventh Street East Historic District. The process is governed by California Environmental Quality Act (CEQA) regulations, with a Negative Declaration issued confirming no significant environmental impact, eliminating the need for an Environmental Impact Report. The only documented financial obligation is a $3,093.75 environmental filing fee paid to the Assessor-County Clerk-Recorder, with no further pricing, contract line items, or procurement costs identified, indicating the process is administrative rather than a competitive federal procurement. All approvals are handled by the City of Riverside’s Community Development Department, with Senior Planner Judy Eguez serving as the primary point of contact for planning matters and environmental documentation. The proposal was posted as a forecast on July 15, 2026, following City Council approval on July 14, 2026, and no formal contract clauses, federal acquisition regulations, payment terms, delivery schedules, or contractor representations are applicable, as the endeavor is municipal land use entitlement, not a federal supply or service contract.

City of Riverside

POSTED

DEADLINE

Place and Purpose of Use, Extension of Time, and Instream Dedication Project

Redway Community Service District

POSTED

DEADLINE

Labbe Meadow Restoration Project (Project)The Labbe Meadow Restoration Project aims to restore degraded hydrologic functions of a meadow on the Labbe Ranch by transforming a historic ditch into a series of open water ponds through the installation of earthen plugs. These structures will elevate the base level of the ditch channel, disrupt linear water conveyance, and enhance surface and subsurface water connectivity with the surrounding meadow to the northeast. The primary goals are to increase habitat complexity by creating new open water features and to promote groundwater recharge, thereby supporting broader ecological resilience. The project focuses on ecological restoration rather than flood control or drainage, emphasizing natural hydrologic processes over engineered solutions. The project is being coordinated by the Regional Water Quality Control Board, Region 5 – Redding, with oversight and implementation support from key personnel including Senior Environmental Scientist Lynn Coster and Project Manager Christy Morgan. Noah Abramson, as the property owner, is also instrumental in the project's execution. All work will take place in Quincy, California, and the project is listed as a forecast with a posted date of July 31, 2026, indicating that formal solicitation and contracting processes are anticipated to begin around that time. There is no set-aside designation or NAICS code specified at this stage, and details regarding funding or contractor eligibility have not yet been published.

Regional Water Quality Control Board, Region 5 - Redding

POSTED

DEADLINE

Town of Kentville: Urban Forest Management Plan

Solicitation # TOK202618

The Town of Kentville is addressing critical vulnerabilities in its urban forest ecosystem caused by climate-related stressors including extreme heat, drought, and the spread of Hemlock Woolly Adelgid, a destructive invasive pest threatening native hemlock stands. With two major urban forest areas—the Gorge and the Ravine—alongside street trees and park canopies in the downtown core, the town faces an aging and unevenly distributed canopy that lacks adequate data for effective management. Immediate priorities focus on closing foundational data gaps to inform strategic planting, conservation efforts, and targeted interventions, including the use of chemical treatments to protect hemlock trees until long-term biological controls, such as predatory insects, can be reliably implemented. The overarching goal is a sustainable, science-based urban forest management system over a 10-to-50-year horizon that ensures resilience, biodiversity, and public benefit. The procurement initiative, solicitation number TOK202618, seeks expert support to develop a comprehensive Urban Forest Management Plan that aligns with these ecological and operational needs. The tender was posted on July 31, 2026, with responses due by August 27, 2026, and is managed by the Town of Kentville through its Contracting Authority, Darren Shupe. While the tender is listed on CanadaBuys, potential bidders are directed to the Nova Scotia Procurement Portal for the most current and accurate tender documents, including any amendments or addenda. Third-party platform registration may be required to access or submit materials. No costs are associated with acquiring documents, and the contract’s full duration and scope details are outlined in the official tender documentation.

Town of Kentville

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Transportation and FOB Destination DeliveryThe contract requires the arrangement of a FOB Destination shipment to the DLA warehouse located in Tracy, California, with delivery terms specifying that inspection and acceptance of goods occur upon arrival at the designated facility. All transportation logistics must ensure goods reach the specified location under FOB Destination conditions, meaning the seller assumes responsibility for both the cost and risk of transit until the shipment is officially accepted at the DLA warehouse. The place of performance is clearly identified with the zip code 95304-5000, and the shipment must comply with all delivery, handling, and inspection requirements established by the Department of Defense through its Land Supplier Operations Engineers. This is a subcontract under NAICS code 484220, which pertains to truck transportation for specialized freight services. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and the offering is accessible via the DIBBS portal. While no specific set-aside classification or organizational type is provided, the contract is managed by the Department of Defense and requires precise adherence to delivery protocols, including timely arrival and successful inspection procedures at the Tracy facility. Performance is contingent upon meeting all condition-of-delivery standards established by the government receiving agency.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires the identification and thorough documentation of all hazardous materials associated with the scope of work, ensuring full compliance with OSHA standards under 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001. This includes the accurate preparation and submission of Safety Data Sheets and proper hazard labeling for all regulated substances, with an emphasis on clarity, completeness, and regulatory alignment. The work is to be performed at the designated location in Tracy, California, with a response deadline of August 10, 2026, and the solicitation falls under NAICS code 541620, indicating environmental consulting services. The contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Engines organization, requiring strict adherence to federal defense procurement requirements and hazardous material handling protocols.

Environmental Consulting Services

POSTED

DEADLINE

Military Shipment Marking and LabelingThe contract requires the application of external markings, barcodes, and labels in strict compliance with MIL-STD-129 standards for military shipments, ensuring all packaging and containers are properly identified for logistics and handling purposes. This includes the accurate depiction of hazardous material identifiers when applicable, to meet federal safety and regulatory requirements. The work must be performed at the designated location in Tracy, California, with a zip code of 95304-5000, and the solicitation is categorized as a subcontract under NAICS code 561990, indicating specialized support services. The proposal response deadline is set for August 10, 2026, and the contracting activity is under the Department of Defense through the Land Supplier Operations Engines office. All work must be completed according to military specifications to ensure readiness and interoperability across defense supply chains.

All Other Support Services

POSTED

DEADLINE

Military-Compliant Packaging ServicesThe contract requires the packaging of lock washers in strict compliance with MIL-STD-2073-1E standards, encompassing unit pack configurations, preservation method 10 for corrosion control, and approved container specifications to ensure operational readiness and environmental protection during storage and transport. All packaging must meet military-grade durability, labeling, and security requirements to support logistical operations under demanding conditions. The work is to be performed at Tracy, California, with a response deadline of August 10, 2026, and is classified as a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services. The contracting authority is the Department of Defense through the Land Supplier Ops Engines organization, and the solicitation is accessible via the DIBBS system, with no set-aside provisions specified, making it open to all eligible subcontractors capable of meeting the technical and regulatory demands of military packaging standards.

Other Warehousing and Storage

POSTED

DEADLINE

Lock Washer Manufacturing and SupplyThe contract entails the manufacture and supply of 3,334 lock washers compliant with military specifications, identified by NSN 5310010655900 and part number 2469HX. The work is classified as a subcontract under NAICS code 332722 and is assigned to the Department of Defense through its LAND SUPPLIER OPNS ENGINES. Performance is required at Tracy, California, with the zip code 95304-5000 designated as the place of performance. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside designation specified. All delivered items must meet exacting military standards to ensure compatibility and reliability in defense applications. The contract details are accessible via the DIBBS platform at the provided URL.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract requires military-compliant packaging, dunnage, and palletization of air valves in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all materials meet rigorous defense logistics requirements. The work must be performed to preserve the integrity of the air valves during storage and transit, using approved methods and materials that comply with federal military specifications for handling, labeling, and securing components within standardized pallet configurations. All packaging must be documented and traceable to support inspection, inventory, and deployment readiness across military supply chains. This subcontract opportunity is issued under the NAICS code 561910 for other support activities for warehousing and storage, with a response deadline of August 10, 2026, and performance expected to occur at Tracy, California, 95304-5000. The contracting entity is the Department of Defense through its Land Supplier Operations Engines organization, and the solicitation is accessible via the DIBBS portal. While no set-aside criteria are listed, the contract is open to qualified subcontractors capable of meeting the exacting packaging and handling demands of military-grade equipment.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive hazard communication services specifically tailored to meet OSHA Hazard Communication standards and Department of Defense military shipping regulations for an air valve shipment. The work includes developing, verifying, and applying accurate labeling and Safety Data Sheet preparation to ensure full compliance with federal safety and transportation mandates. All deliverables must align with the regulatory framework governing hazardous materials handling in military logistics environments. Performance is to be conducted with a place of performance located in Tracy, California, with a strict response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. This is a subcontract under NAICS code 541620, which pertains to management, scientific, and technical consulting services, and is issued by the Department of Defense under the agency name LAND SUPPLIER OPNS ENGINES. The deliverables will be critical to the safe transportation and handling of hazardous components in defense-related supply chains, and all work must reflect strict adherence to both civilian and military regulatory requirements without exception.

Environmental Consulting Services

POSTED

DEADLINE

Commercial Air Valve SupplyThe contract calls for the supply of six commercial off-the-shelf air valves identified by NSN 1045009799770, with all units required to meet military packaging and hazard labeling standards to ensure safe handling and transportation in defense environments. The solicitation is issued under a subcontract type with a NAICS code of 332999, indicating it falls under other fabricated metal product manufacturing. The placement of performance is specified as Tracy, California with a ZIP code of 95304-5000, pointing to the local operational context for delivery and acceptance. The posting date is July 30, 2026, and responses must be submitted by August 10, 2026, leaving a twelve-day window for interested parties to prepare and submit their proposals. The contract is managed by the Department of Defense through the LAND SUPPLIER OPNS ENGINES organization, and all relevant details and submission procedures are accessible via the provided DIBBS portal link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Transportation and Freight to DLA AnnistonThe contract involves the transportation and freight of nozzle assemblies to DLA Distribution in Anniston, Alabama, under FOB Origin terms, meaning the seller is responsible for delivering the goods to the origin carrier with title and risk transferring to the buyer at that point. Delivery must be completed within 57 days of contract award, and all invoicing must comply with WAWF requirements to ensure seamless electronic processing and payment. The solicitation is classified as a subcontract under NAICS code 484220, which corresponds to truck transportation for specialized freight, indicating the scope is focused on logistics rather than manufacturing. The contracting activity is under the Department of Defense, specifically the Land Supplier Operations Engines division, with performance designated to the Anniston, AL, zip code 36201-4199. Response deadlines are set for August 10, 2026, with the solicitation posted on July 30, 2026, allowing potential vendors a 12-day window to submit proposals through the DIBBS platform.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military Marking, Labeling, and BarcodingThis contract requires the application of MIL-STD-129 compliant markings, barcoding, and hazardous material labels to shipments destined for DLA Anniston, ensuring full adherence to Department of Defense packaging and labeling standards. All work must be performed to meet strict military specifications for inventory tracking, logistics efficiency, and safety compliance, particularly concerning the handling and identification of hazardous materials. The place of performance is designated as Anniston, Alabama, with the zip code 36201-4199, indicating that the contractor must be prepared to align operations with the requirements of this specific military logistics hub. The contract is classified as a subcontract under NAICS code 811212, which corresponds to commercial and industrial machinery and equipment repair and maintenance, suggesting the work involves specialized labeling and marking services rather than manufacturing or procurement. The solicitation was posted on July 30, 2026, with a required response deadline of August 10, 2026, and is managed by the LAND SUPPLIER OPNS ENGINES under the Department of Defense. While no set-aside details or point of contact information are provided, contractors must ensure their capabilities fully align with military regulatory frameworks, including precise barcoding and hazardous material documentation, to qualify and perform successfully under this agreement.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of nozzle assemblies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring long-term protection against corrosion, contamination, and environmental degradation during storage and transit. All work must involve the use of approved preservation materials and adherence to clean, dry handling procedures to maintain the integrity and functionality of the components. The service is categorized as a subcontract under NAICS code 493190 and is issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES, with performance required at the designated location in Anniston, Alabama, zip code 36201-4199. Interested parties must submit responses by the deadline of August 10, 2026, and the solicitation is accessible through the DIBBS portal for further details and submission requirements.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Metal Casting and Machining of Nozzle AssemblyThe contract entails the manufacture of 163 precision lubrication nozzle assemblies to strict military technical drawings TDP Rev A Gen 1, requiring advanced metal casting and machining capabilities aligned with defense quality standards. All components must meet exacting dimensional and material specifications to ensure operational reliability in high-stress military environments, with production occurring at the designated place of performance in Anniston, Alabama, under the oversight of the Department of Defense’s Land Supplier Operations Engines. The work is structured as a subcontract under NAICS code 332111, indicating a focus on foundry operations and precision metal component production. Bidders must submit proposals by the deadline of August 10, 2026, with the request for quotation issued on July 30, 2026. Compliance with all defense-grade quality controls, traceability protocols, and documentation requirements is mandatory, and successful offerors are expected to demonstrate proven experience in similar defense-related casting and machining tasks. While no specific set-aside designation is indicated, the contract is accessible to qualified entities capable of fulfilling the technical and regulatory demands of a DoD supply chain, with further details available through the official DIBBS platform link.

Iron and Steel Forging

POSTED

DEADLINE