Top

Hazardous Materials Compliance and Labeling (If Applicable)

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Identification, handling, and labeling of hazardous components per OSHA HAZCOM and DOD safety standards, including SDS preparation.

Similar Contracts

Same NAICS industry code

NAICS: 541620

New

International

Forestry and Parks - Request for Proposal - Water & Wastewater Systems Professional Consulting Services - Provincial Water and Wastewater Regulatory Requirements Throughout the Province

Solicitation # AB-2026-05394

Alberta Parks is seeking qualified consultants to conduct a comprehensive province-wide assessment of its potable water and wastewater systems to ensure full compliance with provincial regulatory requirements under the Environmental Protection and Enhancement Act, the Water Act, Public Health Act drinking-water standards, and other directives from Alberta Environment and Protected Areas. These systems, used across seasonal and year-round recreational facilities, vary widely in size, configuration, and operational cycles, leading to inconsistent monitoring, reporting, and compliance tracking due to differing regional practices and high seasonal staff turnover. The absence of standardized processes has hindered Alberta Parks’ ability to reliably verify compliance, detect gaps, and implement consistent improvements across regions. To resolve this, the project will identify all regulatory obligations for each facility, evaluate current adherence, and provide actionable recommendations to close compliance gaps. The outcome will include a standardized Regulatory Compliance Key Performance Indicator Matrix and a centralized annual dashboard to visually display regional performance, enabling assured, annual confirmation that all water and wastewater compliance obligations are consistently met across the province. The solicitation, AB-2026-05394, is open for proposals until August 31, 2026, with Shaun Polley, Project Manager, serving as the primary point of contact.

POSTED

DEADLINE

Hazardous Materials Handling and SDS Compliance ProviderThe contract requires the provision of Safety Data Sheets (SDS) for hazardous components within the NSN item, ensuring full compliance with OSHA’s Hazard Communication Standard. This includes the accurate application of hazard labels that meet federal requirements, enabling safe handling, storage, and disposal of dangerous materials throughout the supply chain. All deliverables must align with current HazCom regulations to support military medical supply operations, with performance centered at FPO, ZIP 96662. The work falls under NAICS code 541620 and is structured as a subcontract under the Department of Defense’s Medical Supply Chain FSH, with responses due by August 4, 2026. Contractors must demonstrate expertise in hazardous materials documentation and labeling to maintain regulatory compliance and operational readiness.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Airport Consulting Services- Planning/Environmental Services

Solicitation # PE-77099-NONST-2027-000000005

Early County Government in Georgia is soliciting consulting services focused on planning and environmental support for airport-related initiatives. The solicitation, identified as PE-77099-NONST-2027-000000005, was posted on July 29, 2026, and responses are due by August 28, 2026, at 10:00 PM Eastern Time. The scope of work involves professional consulting services necessary to advance airport planning and environmental compliance efforts, with all performance activities to take place within Georgia. The contract is classified under SLED procurement, indicating it is intended for state, local, or educational government entities. Point of contact for inquiries is Stephanie Chandler, reachable via email at stephanie.chandler@earlycounty.org. The solicitation does not specify a set-aside type or NAICS code, and no office address details are provided beyond the state location. Additional information and the full solicitation document can be accessed through the Georgia state procurement portal.

Early County Government

POSTED

DEADLINE

Russian River Integrated Hydrologic Model Support Services

Solicitation # 20260728045

Sonoma County Water Agency is soliciting Statements of Qualifications to build a five-year pre-qualified roster of firms capable of supporting the development and maintenance of an integrated hydrologic model for the Russian River basin. The selected firms will provide technical services related to water supply forecasting, long-term planning, and environmental impact analysis without any guaranteed projects or specific deliverables at this stage. Applicants must demonstrate proven experience in building complex models that link surface and groundwater systems using tools such as GSFLOW, MODFLOW, PRMS, and MODSIM, with particular familiarity with the hydrology of the Russian and Eel Rivers. Key responsibilities include modifying legacy Fortran code, integrating climate change projections into model scenarios, and developing custom scripts for pre- and post-processing data. The contract requires technical expertise in hydrologic modeling and computational analysis, and firms must be prepared to support a wide range of unspecified future tasks under this framework. Proposals are due by August 5, 2026, and inquiries should be directed to Kent Gylfe, Director of Engineering, at the agency’s Santa Rosa office.

Sonoma County Water Agency

POSTED

DEADLINE

Environmental Compliance & Indoor Air Quality TestingThis contract encompasses environmental compliance and indoor air quality testing services including radon testing, formaldehyde monitoring, asbestos and lead abatement, and the preparation of environmental clearance reports in accordance with established safety standards. The work is scoped to ensure the identification, mitigation, and documentation of hazardous materials within facilities, with a focus on protecting occupant health and regulatory adherence. All activities must be conducted under strict protocols to meet federal and industry-specific requirements for environmental remediation and air quality verification. The contract is classified as a subcontract under NAICS code 541620, indicating it involves environmental consulting and related services. It was posted on July 29, 2026, with a response deadline of August 30, 2026, and is being administered by the Department of Defense through its W2SD Endist New York entity. Performance is expected to occur at a location identified by the ZIP code 39855, though specific address details are not provided. The subcontract is part of a broader effort to maintain compliance with environmental safety mandates across DoD facilities, requiring qualified vendors to deliver accurate testing results and formal documentation to confirm clearance of hazards before occupancy or use.

POSTED

DEADLINE

Environmental Compliance and Permitting SupportThe contract seeks specialized support for environmental compliance and permit coordination related to military construction projects, requiring close collaboration with local, regional, and national authorities to ensure adherence to environmental regulations. The work involves navigating complex permitting processes, managing documentation, and facilitating communication between military planners and environmental agencies to secure necessary approvals while maintaining compliance with all applicable laws and standards. This subcontract is classified under NAICS code 541620, indicating it is for environmental consulting services, and is issued by the Department of Defense through Navfacsyscom Europe Africa Central. The project requires timely and accurate execution with a response deadline set for August 14, 2026, and was posted on July 29, 2026, allowing potential vendors a limited window to prepare and submit proposals. Although the specific locations of performance are not detailed in the provided data, the scope implies multi-site activities across Europe, Africa, and Central regions under the jurisdiction of the contracting office. The subcontract nature suggests the prime contractor or federal entity will delegate environmental permitting tasks to a qualified third-party provider with demonstrated expertise in regulatory affairs and military construction environments. There is no set-aside designation specified, meaning the opportunity is open to all eligible small and large businesses.

Navfacsyscom Europe Africa Central

POSTED

DEADLINE

IPM Program Documentation and ReportingThe contract requires the development and ongoing maintenance of site-specific Integrated Pest Management plans, detailed activity logs, and compliance reports for a facility located in Mather, California, with a ZIP code of 95655-4200. All documentation must be managed digitally and submitted to the Contracting Officer’s Representative, ensuring accurate, timely, and auditable records. The work is tied to regulatory compliance and focuses on effective pest management practices tailored to the specific needs of the site. The contractor must maintain consistent communication and adherence to reporting requirements throughout the duration of the agreement. This is a subcontract under NAICS code 541620, issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21, with a response deadline of August 3, 2026. The opportunity was posted on July 29, 2026, and no set-aside designation has been specified. Performance is required at the Mather location, with digital recordkeeping and submission processes being central to fulfillment. The contractor is expected to handle all aspects of documentation, including data integrity, format compliance, and coordination with the designated oversight representative.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Annual AWMA Recertification and ModificationThe contract requires an annual review and recertification of the AWMA to ensure fair market value figures remain accurate, with full modification mandated if any changes exceed a ±10 percent threshold. This obligation ensures ongoing valuation integrity and alignment with current market conditions under a recurring annual cycle. The solicitation is designated as a Small Business Set Aside for total procurement, classified under NAICS code 541620, indicating a focus on management consulting services. It is issued by the Department of Agriculture’s FPAC Business Center Acquisition Division and is open for response until August 12, 2026, with a posted date of July 29, 2026. The nature of the work implies ongoing contractor involvement to validate and adjust asset valuations in compliance with established thresholds, reinforcing accountability and fiscal precision.

Fpac Bus Cntr-Acq Division

POSTED

DEADLINE

Initial Area Wide Market Analysis (AWMA) StudyThe contract requires the conduct of an Initial Area Wide Market Analysis Study to determine the Fair Market Value per acre for agricultural lands enrolled in the Agricultural Conservation Easement Program – Wetland Restoration Endowment in Iowa. This involves comprehensive market research and analysis, including accurate land use categorization and the preparation of USPAP-compliant appraisal reports to ensure regulatory and valuation integrity. The scope is focused on establishing reliable, data-driven valuation benchmarks that support federal conservation objectives through standardized, defensible market assessments. This is a Small Business Set Aside subcontract classified under NAICS code 541620, indicating it is targeted toward small business contractors specializing in scientific and technical consulting services. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is administered by the Department of Agriculture’s FPAC Business Center Acquisition Division. Although specific location details are not provided, the performance is confined to Iowa, and the deliverables must meet federal appraisal standards without deviation, ensuring consistency and legal defensibility across all reported valuations.

Fpac Bus Cntr-Acq Division

POSTED

DEADLINE

Environmental Sampling & Lab TestingThe contract involves the collection and analysis of liquid and solid samples from oily water separators and filtration systems to verify compliance with environmental regulations. This work is critical to ensuring proper operational standards at Patrick Air Force Base, where environmental monitoring is required to meet federal guidelines. The contractor will be responsible for accurately sampling, handling, and testing these materials to provide validated data that supports regulatory reporting and environmental stewardship. The solicitation is classified as a subcontract under NAICS code 541620, which covers environmental consulting services. It was posted on July 29, 2026, with a strict response deadline of August 12, 2026, at 6:00 p.m. The contracting agency is the Department of Defense, specifically under the FA2521 45 Cons Pk designation, indicating this is part of a larger defense infrastructure or facilities management effort. No set-aside type is specified, and the place of performance is exclusively at Patrick Air Force Base, requiring the contractor to be capable of on-site operations and timely delivery of analytical results under strict protocol.

POSTED

DEADLINE

Environmental Compliance TestingThe contract titled Environmental Compliance Testing involves comprehensive testing and oversight for asbestos, radon, and formaldehyde emissions across federal facilities to ensure adherence to EPA, OSHA, and other federal regulatory standards. The work requires specialized expertise in environmental sampling, monitoring, and abatement procedures, with an emphasis on protecting worker and public health in accordance with stringent federal guidelines. The services are critical for maintaining compliance and mitigating hazardous exposure risks in government-owned or -operated buildings. This is a subcontract under NAICS code 541620, issued by the Department of Defense through the W071 Endist Seattle office, with performance specifically targeted at East Wenatchee. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026. Although no set-aside classification is specified, the contract is intended for qualified subcontractors capable of delivering technical environmental services under federal oversight. The absence of a point of contact and detailed location information suggests that further details will be provided during the subcontracting process.

POSTED

DEADLINE

Sustainable Product Compliance & Certification SupportThe contract seeks documentation and certification services to verify that supplied products comply with federal sustainability standards, specifically including BioPreferred®, Energy Star, and EPA SNAP programs. This subcontract is set aside for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 541620, which relates to administrative management and general management consulting services. The opportunity was posted on July 29, 2026, with a response deadline of July 31, 2026, indicating a narrow window for submission. The awarding agency is the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, though specific performance location and point of contact details are not provided. The contractor must ensure all products meet rigorous federal sustainability criteria and deliver verifiable certifications to support compliance.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 23 hours ago

DEADLINE

in 1 day

View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Solicitation # SPE4A1-26-T-2497

The contract pertains to the procurement of 198 units of a screw thread insert identified by NSN 5325-00-786-6185 under solicitation SPE4A1-26-T-2497, with a delivery requirement of 80 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in their revision state as of the solicitation issue or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are categorized as critical, major, or minor and assigned verification levels or AQLs accordingly. Configuration changes require formal engineering change proposals, and requests for deviations or waivers must be submitted. Documentation for source approval is mandated under RC001, and export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unlicensed export or disclosure to foreign persons, including foreign nationals within the U.S. Only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access via the DLA questionnaire are permitted to handle such data under DFARS 252.225-7048. Physical identification and removal of government markings from non-accepted items are required per RQ011 and RQ017. The contract is administered by the Aviation Supply Chain under the Department of Defense with performance to occur at Robins AFB, Georgia, and inquiries are directed to Jade Stringfield at the provided contact information.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2496

The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance TestingThe contract requires the performance of final inspection and acceptance testing at Fort Wainwright, Alaska, to verify that all delivered items meet prescribed quality standards. Inspection and testing must be conducted in accordance with either MIL-STD-1916 or ASQ H1331 sampling plans, ensuring statistical rigor and compliance with military specifications. The work is scoped to occur at the destination point, and successful completion hinges on demonstrating conformance through documented results using these accepted methodologies. This is a subcontract under the NAICS code 541330, issued by the Aviation Supply Chain within the Department of Defense, with a response deadline of August 5, 2026. The place of performance is specifically identified as Fort Wainwright with ZIP code 99703-7000, indicating that all activities must be executed on-site at this military installation. Bidders must be prepared to travel or operate at this location to fulfill inspection obligations, and failure to adhere to the specified sampling standards will result in non-acceptance of the delivered goods.

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of preservation, packaging, palletization, and marking services for circuit card assemblies in strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness and traceability. All work must meet rigorous defense logistics requirements for protection, labeling, and handling of sensitive electronic components intended for operational deployment. The services are to be performed at Fort Wainwright, Alaska, with a delivery deadline of August 5, 2026, and are solicited as a subcontract under NAICS code 493190 for warehousing and storage. The contract is managed by the Aviation Supply Chain within the Department of Defense and is available for bidding via the DIBBS platform.

Other Warehousing and Storage

POSTED

DEADLINE

Circuit Card Assembly ManufacturingThe contract seeks the manufacture and delivery of four high-reliability circuit card assemblies meeting stringent military and Defense Logistics Agency standards, encompassing full lifecycle responsibilities from component sourcing and procurement through assembly, functional testing, and final packaging. All work must adhere to specified technical and quality controls to ensure mission-critical performance, with delivery required at Fort Wainwright, Alaska, under a subcontract arrangement within the Department of Defense’s Aviation Supply Chain framework. The NAICS code 334418 indicates classification under Electronic Component and Product Manufacturing, underscoring the specialized nature of the technical requirements. Responses are due by August 5, 2026, with the solicitation posted on July 28, 2026, providing a seven-day window for qualified vendors to submit proposals. The contract is not subject to a specific set-aside designation, meaning all eligible contractors may respond, and the place of performance is fixed at the specified Alaska location. Compliance with military-grade specifications for durability, environmental resilience, and traceability is non-negotiable, and successful bidders must demonstrate experience with defense-level electronics manufacturing, rigorous inspection protocols, and the ability to meet exacting documentation and reporting standards required by the Defense Logistics Agency.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

PUMP, FUEL, ELECTRICA

Solicitation # SPE4A1-26-T-2469

The contract pertains to the procurement of four electrical fuel pumps with NSN 2910-01-732-6937 under solicitation SPE4A1-26-T-2469, issued by the Defense Logistics Agency’s Aviation Supply Chain. Deliveries are required within 20 days after award, with FOB Origin pricing terms and delivery to Assault Craft Unit 4 at Building 3821, 2155 11th Street, Virginia Beach, VA 23459-3018. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of specific preservation methods, container types, and packaging codes, while explicitly excluding Item Unique Identification per DFARS 252.211-7003(c)(1)(i). All shipments must be transported via traceable means, prohibiting parcel post, and palletization must adhere to DLA’s RP001 requirements. The contract includes robust cybersecurity and information safeguards requiring compliance with CMMC Level 2 self-assessment, NIST SP 800-171, and DFARS 252.204-7012 for safeguarding covered defense information, with mandatory cyber incident reporting. Mercury or mercury-containing compounds are prohibited from direct contact with delivered hardware except for specific functional applications such as batteries, fluorescent lamps, sensors, and weapons systems, with such exempt items requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at destination under zero-defect sampling standards per MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable procurement, hazardous material safety, subcontracting, contract changes, and payment terms, including accelerated payments to small business subcontractors. The total contract value appears to be $4.00 based on available line item data, though this is likely incomplete or misformatted, as the unit price is not specified. The solicitation requires electronic submission via DIBBS by July

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE4A1-26-T-2495

This contract pertains to the procurement of four circuit card assemblies identified by NSN 5998-00-881-0949 and part number 7104170-00 under solicitation SPE4A1-26-T-2495, with delivery required within 20 days to Fort Wainwright, Alaska. The items must conform to stringent technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stipulated, and quality verification levels are assigned based on attribute criticality. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The contractor must adhere to CMMC Level 2 self-assessment requirements and ensure materials meet equivalence standards for legacy specifications like MIL-S-13949, which was canceled but still guides material selection. All assemblies are to be delivered FOB origin with no variance allowed in quantity, and acceptance occurs at the destination. The point of contact for questions is Allison Hugel of the DLA, and the contract requires adherence to DLA packaging, transportation, and supply chain protocols specified in associated procedural notes.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Quality Inspection and AQL Sampling Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Domestic Freight and FOB Origin Transportation

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Labeling Services

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Manufacturing of Repair Kit, Protective (NSN: 6605010791890)

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2493

The contract specifies the procurement of an Indicator Subassembly, Position, Flight Instrument, with part number 133047 and NSN 6610016689621, for a quantity of 38 units at a unit price of $38.00, totaling $1,444.00. Delivery is required within five days of award, with shipment destined for Tobyhanna Army Depot, Pennsylvania, under FOB Origin terms. All items must be packaged per ASTM D3951 and labeled strictly in accordance with MIL-STD-129, with palletization meeting DLA Packaging Requirements, and the DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise directed. The supplier must comply with CMMC Level 2 self-assessment, remove government identification from rejected items, and physically mark bare items as required. Shipment must be sent via the fastest traceable method, excluding parcel post, with all markings and references including the RDD 777, Project TP 1, and supplier identifier W25G1V. The solicitation is a total small business set-aside under NAICS 334511, issued by the Department of Defense’s Aviation Supply Chain, with a response deadline of August 4, 2026, and a posted date of July 27, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days

View Details