Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Waste Treatment and Disposal (Alkaline Wastewater)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the final treatment and disposal of 1,500 gallons of waste sodium hydroxide solution, a hazardous alkaline wastewater requiring strict regulatory compliance. The work includes neutralization of the caustic solution, potential recovery of any contained metals, and secure final disposal via approved landfill or incineration methods. All activities must adhere to Resource Conservation and Recovery Act (RCRA) and Defense Logistics Agency (DLA) requirements to ensure environmental safety and regulatory accountability. The subcontract is issued under the NAICS code 562219 for hazardous waste treatment and disposal, and is managed by the Department of Defense through the Defense Logistics Agency. Performance is expected to comply with all federal hazardous waste handling protocols, though specific location details for performance or contact information are not provided. The solicitation was posted on July 15, 2026, and the contract is accessible via the DIBBS portal under the specified award and delivery identification numbers.

General Info

1,500 gallons of hazardous sodium hydroxide waste to be treated and disposed of per RCRA and DLA standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

562219 - Other Nonhazardous Waste Treatment and Disposal

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP4500-26-F-6441.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CS11B5

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Final treatment and disposal of 1,500 gallons of waste sodium hydroxide solution, including neutralization, metal recovery (if applicable), and secure landfill or incineration per RCRA and DLA requirements.

Similar Contracts

Same NAICS industry code

Tomoka Farms Road Landfill (TFRL) Leachate Evaporation System Demonstration Project

Solicitation # 26-P-130JD

The County of Volusia has issued solicitation 26-P-130JD for the Tomoka Farms Road Landfill Leachate Evaporation System Demonstration Project. The project involves the design, installation, and operation of a leachate evaporation system at the Tomoka Farms Road Landfill in Port Orange, Florida. The primary objective is to achieve an average evaporation rate of 100,000 gallons per day over a six-month performance period. The scope includes the installation of evaporators in two existing leachate storage basins, the submission of a monitoring and reporting plan within 30 days of the Notice to Proceed, and the provision of 40 hours of consulting services. The project must be executed in accordance with the Florida Department of Environmental Protection Research, Development and Demonstration permit and the provided construction plans. The contract follows a phased pricing structure consisting of mobilization, a six-month lease-with-return period, and demobilization, with an option for a lump sum buy-out and a subsequent two-year service contract upon successful demonstration. Award selection is based on best value, with evaluation weights placed on the project approach (30%) and a history of similar projects (25%). Requirements for the prime contractor include being a Florida Registered Electrical Contractor and providing comprehensive payment and performance bonds equal to 100% of the contract price. Mandatory insurance coverages include Workers' Compensation, Commercial General Liability, Commercial Auto Liability, and Excess Liability. Proposals were due by November 12, 2026, and must remain valid through May 16, 2027.

POSTED

DEADLINE

in about 2 months

26-45201-001 - Putnam County Solid Waste Activities Management and Disposal Services

Solicitation # 26-45201-001

The Putnam County Board of Commissioners is soliciting sealed bids for solicitation 26-45201-001 to provide comprehensive solid waste activities management and disposal services. The scope of work includes the staffing of convenience centers, the disposal of solid waste and recyclables, and the transportation of waste to appropriate facilities. The contract is scheduled to begin on January 1, 2027, and will be awarded to the vendor submitting the lowest responsive and responsible bid. Local, minority-owned, and women-owned businesses are encouraged to apply. Proposals must be submitted using the official county form and received by Friday, October 30, 2026, at 10:00 a.m. Submission requirements include two paper copies and one electronic copy, along with a work resume, contractor affidavits, and a citizenship affidavit with a driver's license. Bidders must comply with the Drug-free Work Place Act and the Federal Work Authorization Program. Insurance requirements are stringent, requiring Putnam County to be named as an additional insured with specific limits for Commercial General Liability, Automobile Liability, and Workers' Compensation. Invoicing is permitted once per month in accordance with county regulations.

Putnam County Board of Commissioners

POSTED

DEADLINE

in about 1 month

BID FOR: Sludge Removal, Transportation and Final Disposal Services

Solicitation # BD-27-1143-PRO15-PRO15-133829

The City of Brockton Procurement Department is soliciting bids for sludge removal, transportation, and final disposal services to support the city's Advanced Water Reclamation Facility. This open market solicitation, identified as BD-27-1143-PRO15-PRO15-133829, requires the comprehensive management of sewage and liquid waste treatment. Interested parties must submit their bids electronically through the BidNet Portal by October 22, 2026, at 11:00 AM EST. A site tour is scheduled for October 8, 2026, to assist bidders in their preparations. The resulting contract will have a minimum term of one year beginning January 1, 2027, with the possibility of four six-month extensions. Bidders are required to provide a bid security of 150,000.00 dollars. The procurement is managed by the Procurement Department, with Leandro DaRosa serving as the primary purchaser and Michael Morris as the billing contact. All services will be performed at the facility located on School Street in Brockton, Massachusetts.

PRO15 - Procurement Department

POSTED

DEADLINE

Sludge Disposal and Re-use Facility ServicesThis subcontract for the California Department of Corrections and Rehabilitation provides essential disposal and re-use facility services for prime contractors managing waste projects. The service specifically involves the acceptance of Sub Class B sludge for legal disposal or re-use in accordance with CCR Title 23 regulations. The provider is responsible for delivering disposal and re-use certifications along with weight receipts. These receipts are critical for the California Department of Corrections and Rehabilitation to maintain accurate reporting for the Recycle and Salvage Program. The solicitation is listed under NAICS code 562219 with a response deadline of November 18, 2026.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 2 months

Drywall and Gypsum Wallboard RecyclingThis subcontract with the Region of Peel involves the industrial recycling of drywall and gypsum wallboard waste for prime contractors. The service provider is responsible for accepting loads from six Community Recycling Centres and utilizing industrial processing equipment and certified weigh scales to remove plastic and metal hardware contaminants from the gypsum waste. The contractor must provide weigh scale tickets for every load and ensure the delivery of recycled gypsum material along with all necessary receipt documentation. The solicitation was posted on September 24, 2026, with a response deadline of October 20, 2026.

POSTED

DEADLINE

SUPPLY OF RECYCLING AND DISPOSAL SERVICES OF DRYWALL MATERIAL, FOR THE REGION OF PEEL’S COMMUNITY RECYCLING CENTRES

Solicitation # 2026-568T

The Regional Municipality of Peel is seeking a qualified vendor under solicitation 2026-568T to provide recycling and disposal services for drywall and gypsum wallboard waste. The scope of work requires the vendor to accept and recycle loads from six Community Recycling Centres, including Brampton, Heart Lake, Fewster, Battleford, Bolton, and Caledon, during weekday hours of 8:00 AM to 4:00 PM. The contract is for an initial 12-month term with the option for four additional 12-month extensions. To be eligible, bidders must provide a valid Environmental Compliance Approval (ECA) from the Ministry of the Environment, Conservation and Parks, as an Environmental Activity Sector Registry is not an acceptable substitute. Awarding is based on the Total Factored Bid Price, which combines the vendor's base price with a transportation cost factor based on the distance from the agency's facilities to the vendor's processing site. Bidders must submit a comprehensive bid covering all six facilities, as partial bids are not permitted. Key administrative requirements include monthly invoicing per site via Electronic Funds Transfer, with payments based on the agency's recorded weights. The vendor assumes ownership of the waste per the Ontario Environmental Protection Act and must adhere to strict privacy and safety standards, including WSIB coverage and compliance with the Municipal Freedom of Information and Protection of Privacy Act. Submissions are due by October 20, 2026, via the electronic bidding portal.

POSTED

DEADLINE

C5613442-D Non-Hazardous Sludge Removal, Hauling and Refuse Services

Solicitation # C5613442-D

The California Department of Corrections and Rehabilitation (CDCR) is soliciting a Master Agreement for non-hazardous sludge removal, hauling, and refuse services across various statewide institutions. The contractor is responsible for providing all labor, personnel, transportation, materials, and equipment necessary to perform these services. Performance must comply with United States Environmental Protection Agency (EPA) 503 Federal Regulations, California Regional Water Quality Control Board requirements, and all applicable federal, state, and local codes. The scope includes specific locations such as the California Institution for Men, California Men's Colony, and the California Health Care Facility, among others. Bids are evaluated based on a comparison of unit rates provided in the Rate Sheet for a 36-month term, with the total award basis including a 25 percent allowance for as-needed, unforeseeable services. The solicitation emphasizes participation from Small Business (SB) and Disabled Veteran Business Enterprise (DVBE) firms, offering specific incentives for certified entities. Contractors must adhere to strict safety guidelines, including Cal/OSHA regulations regarding bloodborne pathogens and aerosol transmissible diseases. Payment is processed monthly in arrears upon inspection and acceptance of work by a CDCR Contract Liaison. The bid submission deadline is November 18, 2026.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 2 months

MECP Approved Waste DisposalThis subcontract opportunity with York Region involves providing waste disposal facilities for prime contractors working on wastewater projects. The selected provider must operate a facility approved by the Ministry of Environment, Conservation and Parks to accept and dispose of sewage debris, grease, and grit. The contractor is responsible for ensuring the legal disposal of all waste materials and must provide official disposal certificates and certified weigh bills. The response deadline for this solicitation is October 29, 2026.

POSTED

DEADLINE

in about 1 month

C5613442-D Non-Hazardous Sludge Removal, Hauling and Refuse Services

Solicitation # 0000040464

The State of California is seeking a contractor under Master Agreement C5613442-D to provide non-hazardous sludge removal, hauling, and refuse services for various California Department of Corrections and Rehabilitation locations. The selected contractor will be responsible for all labor, personnel, transportation, materials, equipment, and permits necessary to complete the services. Compensation will be based on the rates specified in the provided rate sheet, which covers all associated expenses including fuel, mileage, and taxes. Interested vendors must submit their responses by the closing date of November 18, 2026, at 11:00 PM. The primary point of contact for this solicitation is Kristina Lopez. Prospective bidders may be required to register on the State of California website to participate in this opportunity.

State of California

POSTED

DEADLINE

in about 2 months

Demolition and Removal ServicesThis subcontract for Demolition and Removal Services involves the demolition and removal of existing surge tanks for prime contractors working on WSSC Water wastewater pumping station projects in Maryland. The scope of work includes cutting, dismantling, and hauling away concrete and steel tank structures, as well as performing general site clearing. The objective is to deliver a cleared site with all tanks removed and debris disposed of in accordance with applicable regulations. The opportunity is categorized under NAICS code 562219 and was posted on September 23, 2026, with a response deadline of September 30, 2026. Interested parties can find further details and submission guidelines through the WSSC Water online portal.

POSTED

DEADLINE

Pumping, Transportation, and Disposal of Leachate

Solicitation # ITB-26-00422

Hillsborough County is soliciting competitive sealed bids under ITB-26-00422 for the pumping, transportation, and disposal of leachate from the Southeast County Landfill in Lithia, Florida. This as-needed contract spans a three-year period with a project estimate of 14,280,000.00 dollars. The selected contractor must transport leachate to Florida Department of Environmental Protection permitted disposal sites not owned by the county within 12 hours of written notice. Key performance requirements include maintaining liquid levels at Pump Station B below 30 inches and providing a representative available 24/7 with a maximum one-hour response time. All activities must be documented using the Leachate Hauling and Disposal Reporting Form, which requires signatures from both the contractor and the wastewater treatment facility operator to verify discharged quantities. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals exclusively through the Euna Procurement electronic system by October 14, 2026, at 2:00 P.M. ET. Mandatory requirements include a drug-free workplace certification, E-Verify compliance, and comprehensive insurance coverage, including pollution and cyber liability, issued by carriers with A.M. Best ratings of A- Class 7 or better. Contractors must ensure all vehicles display company logos and emergency contact information. Payment is processed via ACH direct deposit within 45 days of receiving a proper invoice, subject to approval by the project manager within 15 days of receipt.

Hillsborough County

POSTED

DEADLINE

Structural Demolition & Debris RemovalThis subcontract for Structural Demolition and Debris Removal involves the demolition of wood structures for prime contractors on Oakland Unified School District facility projects in Oakland, California. The selected contractor is responsible for removing wood materials and hauling debris off-site using excavators and loaders to ensure a clean, safe, and stable slab surface is delivered. To qualify, contractors must hold a California C-21 or A license, be registered under Labor Code section 1725.5, and comply with the OUSD Project Labor Agreement. The solicitation was posted on September 22, 2026, with a response deadline of October 14, 2026.

Oakland Unified School District

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Services - DLA Susquehanna

Solicitation # NAFUA1-26-R-0005

The Defense Logistics Agency has issued solicitation NAFUA1-26-R-0005 for a single concessionaire to provide full-scope cafeteria, catering, 24/7 automated market, and optional mobile food truck services at Defense Distribution Center Susquehanna in New Cumberland, Pennsylvania. The contract consists of a two-year base period starting December 1, 2026, with four optional two-year extensions for a total potential duration of ten years. This is a non-funded contract where the government will not pay for services; instead, the contractor pays a monthly fee based on either a Minimum Monthly Guarantee or a gross sales commission percentage. The selected provider will manage Darrs Cafe and Inflight Cafe to support approximately 4,500 personnel, with optional responsibilities including the Grill Fresh food truck and the annual Turkey Day event. Proposals must be submitted to Contracting Officer Michael Thompson by October 30, 2026, at 4:00 PM EDT. Submissions must include a fee schedule, financial statements, a concession operating plan, and a five-year past performance history.

POSTED

about 5 hours ago

DEADLINE

in about 1 month

COOLER, FLUID, INDUSTRIA

Solicitation # SPE8E8-26-T-5578

Solicitation SPE8E8-26-T-5578 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for one industrial fluid cooler, specifically a fluid-to-fluid aircraft heat exchanger. The required item is identified by NSN 4420-01-524-4875 and part number 60357-000 from Ametek Thermal Systems Inc. The original required delivery date is September 11, 2026, with a delivery timeframe of five days after receipt of order. Shipping is FOB Origin, while inspection and acceptance will occur at the destination, specifically Camp Ripley in Little Falls, Minnesota. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Item Unique Identification is not required for this procurement. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All quotes must be submitted through the DIBBS portal.

Aircraft Manufacturing

POSTED

DEADLINE

ADAPTER, BATTERY CHA

Solicitation # SPE7L7-26-T-5254

Solicitation SPE7L7-26-T-5254 is a fixed-price request for quotation issued by the Defense Logistics Agency Land and Maritime for one battery charger adapter, identified by NSN 6130-01-518-7039. The procurement is categorized under NAICS 335999 and is designated as a critical application commercial item. Delivery is required within five days after receipt of the order, with the original required delivery date set for December 9, 2024. Shipping is FOB Origin, with the destination for both inspection and acceptance being the Fleet Readiness Center Southeast in Jacksonville, Florida. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with all labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Technical and quality requirements are governed by the DLA Master List via RA001. Additionally, the contractor must comply with various FAR and DFARS clauses, including those regarding the prohibition of mercury, safeguarding covered defense information, and the use of Wide Area WorkFlow for electronic invoicing. Quotes must be submitted via the DIBBS portal by September 25, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

WAVEGUIDE ASSEMBLY

Solicitation # SPE7M5-27-Q-0011

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7M5-27-Q-0011 for the procurement of six Waveguide Assemblies. The items are identified by NSN/Part Number 5985-01-264-2759 and are associated with purchase request 7018379364. This federal solicitation was posted on September 25, 2026, with a response deadline set for October 9, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Other Electronic Component Manufacturing

POSTED

DEADLINE

HEATER, DUCT TYPE, STATI

Solicitation # SPE8E8-26-T-5579

Solicitation SPE8E8-26-T-5579 is a fixed-price request for the procurement of one stationary duct-type heater, identified by NSN 4520-01-568-7467 and part number 20-182665. Issued by the Defense Logistics Agency Troop Support Construction and Equipment office, the requirement specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 11, 2026. The item is to be delivered FOB Origin to the 0189 CS BN CO A Composite AWCF SSA at Fort Bragg, North Carolina. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Specific quality and technical requirements include RP001 for palletization, RQ011 for the removal of government identification from non-accepted supplies, and RD003 regarding covered defense information. Offerors must submit quotes via the DIBBS portal by September 25, 2026, and comply with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various FAR and DFARS clauses concerning equal opportunity, human trafficking, and cybersecurity.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

MODIFICATION KIT, AIR C

Solicitation # SPE8E7-26-T-3804

Solicitation SPE8E7-26-T-3804 is a fixed-price request for the procurement of one modification kit for air circulating equipment, identified by NSN 4140016319560 and Elma Electronics part number CAE032602. The requirement is issued by the Defense Logistics Agency Troop Support Construction and Equipment office. Delivery is required within 20 days after order, with an original required delivery date of August 28, 2026. The item is to be delivered FOB destination to the USS New Hampshire (SSN 778) at FPO AE 09579. Inspection and acceptance will also take place at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific constraints include a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses approved by NAVSEA. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cyber incident reporting.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

CONTAINER, FREIGHT, UTIL

Solicitation # SPE8ED-26-Q-0701

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE8ED-26-Q-0701 for the procurement of 14 utility freight containers. The items are identified by NSN/Part Number 8150-01-586-4979 and are associated with purchase request 7018448210. This federal solicitation was posted on September 25, 2026, with a response deadline set for October 2, 2026. Interested parties can access further details and submit responses through the DIBBS portal.

Other Metal Container Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M5-27-Q-0009

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7M5-27-Q-0009 for the procurement of one waveguide, identified by NSN/Part Number 5985-01-557-1277. This federal requirement is tracked under purchase request 7018377747. The solicitation was posted on September 25, 2026, with a response deadline set for October 9, 2026. Interested parties can find further details and submit responses through the DIBBS portal.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-00-143-3075)This subcontract through the Defense Logistics Agency involves the supply of 100 incandescent lamps identified by NSN 6240-00-143-3075. The selected manufacturer or source must ensure all items meet the specific technical requirements associated with the national stock number and adhere to DLA standards for packaging and labeling. Delivery of the goods is required on an FOB Origin basis, with the place of performance located in Phoenix, Arizona. The opportunity was posted on September 24, 2026, with a response deadline of October 5, 2026. Falling under NAICS code 335139, this contract is designed for suppliers providing components to prime contractors who are delivering on DLA supply contracts.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

12V Gel Cell Battery Supplier (Type I)This subcontract opportunity with the Defense Logistics Agency requires the supply of 22 Type I 12 Volt Gel Cell batteries for prime contractors. All provided batteries must meet specific Type I specifications and maintain a minimum shelf-life of 12 months. The delivery includes the batteries along with all necessary technical documentation. If proposing alternate parts, the supplier must provide comprehensive source and part number documentation or a full data package for engineering evaluation. The performance location for this contract is Fort Bragg, North Carolina, under NAICS code 325181. Responses are due by October 5, 2026.

Alkalies and Chlorine Manufacturing

POSTED

DEADLINE

Supply of Pneumatic Vehicular Tires (NSN 2610015840041)This subcontract through the Defense Logistics Agency involves the supply of nine pneumatic vehicular tires for prime contractors on Department of Defense procurement projects. The required tires must meet NSN 2610015840041 specifications, featuring size ST225/75D15, 8 PLY, a 2540 LBS load capacity, 65 PSI inflation, and natural rubber material. The contract requires strict adherence to MIL-STD-129 for shipment marking and DFARS 252.225-7001 Buy American requirements. Performance will take place in Port Hueneme, California, under NAICS code 423990. The response deadline for this procurement is October 5, 2026.

Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized military packaging and marking services for 5,000 cleaning kits. The contractor is responsible for preserving and packaging the kits according to MIL-STD-2073-1 Appendix D and executing all marking and labeling in compliance with MIL-STD-129. The scope of work requires the use of industrial marking equipment along with MIL-SPEC crates, liners, and cushioning to ensure the kits are prepared for shipment. The opportunity is categorized under NAICS code 561910 and was posted on September 24, 2026, with a response deadline of October 1, 2026. The final deliverable consists of 5,000 fully packaged and marked cleaning kits ready for transport.

Packaging and Labeling Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS