Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Heavy-Duty Passenger Bus Manufacturing or Supply

Active

Federal

Response Deadline08/04/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of a fully assembled 72-passenger MFSAB built on a commercial chassis, equipped with a Cummins B6.7 engine and an Allison 2500 transmission, featuring air brakes, fire-retardant seating, and certified emergency exits to ensure passenger safety and compliance with operational standards. The vehicle must meet all technical specifications for heavy-duty passenger transport and be fully functional upon delivery. This solicitation is a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 336120 classifying it under the manufacture of motor vehicles for passenger transport. The place of performance is identified as Fort Moore, Georgia, with a zip code of 31699, indicating where the vehicle must be delivered or where services are rendered. The response deadline is set for August 4, 2026, at 6:00 p.m., and the contracting activity is managed by the Department of Defense through office FA4830 23 Cons Cc, signaling this is a defense-related acquisition requiring strict adherence to federal procurement guidelines.

General Info

Small business subcontract for 72-passenger MFSAB with Cummins engine, Allison transmission, air brakes, and safety features to be delivered to Fort Moore by August 4, 2026.

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

336120 - Heavy Duty Truck ManufacturingView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 06:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4830 23 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4830 23 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a fully assembled 72-passenger MFSAB with commercial chassis, Cummins B6.7 engine, Allison 2500 transmission, air brakes, fire-retardant seating, and emergency exits.

Similar Contracts

Same NAICS industry code

Fire Apparatus Fabrication and AssemblyThe contract entails the complete fabrication and assembly of a wildland fire apparatus, requiring full integration of the chassis, pump, tank, body, compartments, and all necessary accessories. This includes structural welding and custom frame modifications to ensure the vehicle meets operational demands in rugged terrain. The work must be performed to precise engineering standards, ensuring durability, safety, and performance under extreme conditions typical of wildland firefighting scenarios. All components must be seamlessly unified into a functional, reliable unit ready for immediate deployment. This subcontract is issued under the NAICS code 336120 for motor vehicle manufacturing and is managed by the Department of Transportation in Hawaii. The solicitation was posted on July 24, 2026, with a response deadline of August 15, 2026. The place of performance is not specified beyond the state level, indicating work may occur at any qualified facility within Hawaii. Interested parties must submit proposals by the deadline to be considered for award, with no set-aside designation applied to this opportunity. The project demands technical expertise in custom vehicle construction and a proven ability to execute complex assembly tasks under tight timelines.

Department of Transportation

POSTED

DEADLINE

FS1220-27 Furnish & Del of Type 6 Brush Truck at Hawaii AirportsThe contract calls for the furnishing and delivery of two Type 6 brush trucks, one for Daniel K. Inouye International Airport on Oahu and one for Lihue Airport on Kauai, both in Hawaii. These vehicles are essential for wildfire response and aircraft rescue firefighting operations at these critical aviation facilities. The solicitation, identified as B27000122 under the title FS1220-27, was posted on July 24, 2026, with responses due by August 15, 2026. It is issued by the Hawaii Department of Transportation under the State and Local Government (SLED) category and has no specific set-aside designation. The place of performance is explicitly limited to the two Hawaiian islands, requiring delivery and setup at the designated airports. Primary point of contact for inquiries is Rachael Hui Jin Park, reachable via phone and email, with Edwin Sniffen listed as a secondary contact. All contractual obligations must be fulfilled within Hawaii’s jurisdiction, and interested parties must engage through the official state procurement portal.

Department of Transportation

POSTED

DEADLINE

Heavy-Duty Tridem Axle Dump Truck Manufacturing & AssemblyThe contract calls for the full manufacturing or integration of heavy-duty tridem axle dump trucks with a gross vehicle weight rating of 88,000 pounds, applicable to model year 2027 or newer, meeting strict specifications for engine, transmission, frame, and body components. The work involves end-to-end production or assembly to deliver fully compliant vehicles tailored for high-capacity hauling operations, with exact technical requirements to be defined by the contracting entity. All units must be built to exacting standards ensuring durability, performance, and regulatory compliance under demanding operational conditions. This is a subcontract opportunity issued by the Mississippi Department of Finance and Administration under NAICS code 336120, with a response deadline of August 18, 2026. The place of performance and point of contact details are not specified in the provided data, but the solicitation is accessible via the Mississippi state contract portal. Eligible contractors must be prepared to demonstrate capability in heavy truck manufacturing or integration, meet all technical and quality benchmarks, and complete production within the timeline required by the project, with no set-aside provisions indicated.

POSTED

DEADLINE

Refrigerated Vehicle Supply and DeliveryThe contract requires the supply, transportation, and delivery of two 20-foot refrigerated vehicles to Tarapoto, Peru, with strict compliance to cold-chain standards ensuring operational temperatures between 0°F and 40°F throughout transit and use. The vehicles must be fully equipped to maintain these critical temperature ranges under varying environmental conditions, safeguarding the integrity of temperature-sensitive goods during transport. All logistics, including export compliance and final delivery to the designated location, are the responsibility of the contractor, who must ensure the units meet international shipping and refrigeration performance benchmarks. This subcontract under NAICS code 336120 is managed by the Department of Defense and was posted on July 24, 2026, with responses due by August 12, 2026. The performance location is specified as Tarapoto, Peru, and while no set-aside designation is indicated, the solicitation is open to eligible subcontractors capable of meeting technical, logistical, and temporal requirements. The contract does not include specific point of contact details or a solicitation number, but the official workspace link is available for further submission details and documentation.

0410 Aq Hq Contract

POSTED

DEADLINE

Ladder/Tower Unit Vehicles - Office of Protective Services NASAThe solicitation number 80NSSC26Q00120001 replaces the previous draft version and serves as the sole request for quotations for two Ladder/Tower Units required by NASA’s Office of Protective Services, with one unit to be delivered to the Stennis Space Center Fire Department in Mississippi and the other to the Ames Research Center Fire Department in California. Offers must be submitted by August 3, 2026, to designated NASA email addresses and must include the solicitation number, FOB destination, proposed delivery schedule, payment and discount terms, warranty details, taxpayer identification number, and any special commercial terms, signed by an authorized representative. The solicitation follows FAR Part 12 for commercial acquisitions and incorporates provisions current through FAC 2025-06, using Standard Form 1449 as encouraged guidance. Delivery is required to be free on board destination no later than March 10, 2028, with all offers evaluated from responsible sources without set-aside restrictions. The acquisition is classified under NAICS Code 336120 with a size standard of 1,500 employees, and offerors must explicitly state their size status in their submissions. The contracting activity is managed by the NASA Shared Services Center under the National Aeronautics and Space Administration, with primary point of contact Star Johnson and secondary contact Sarah Maine. The notice is a combined synopsis and solicitation, meaning no separate written solicitation will be issued, and all information necessary for response is contained within this document. The place of performance is specified at the two NASA centers, and all deliveries must meet the FOB Destination terms, with no alternative shipping arrangements permitted unless explicitly stated in the offer.

NASA Shared Services Center

POSTED

DEADLINE

Purchase of One (1) 4x4 Regular Cab – Chassis Dump Truck with Dump BodyThe Town of Woodstock is soliciting sealed bids for the purchase of a single new 4x4 regular cab and chassis truck outfitted with a dump body, intended for use by the Public Works Department to support routine hauling and maintenance tasks. The solicitation, identified as IFB-124938, was posted on July 23, 2026, with a response deadline of August 3, 2026, at 7:00 PM. Bidders must be qualified vendors capable of delivering a vehicle that meets the specified configuration and operational requirements for municipal service. All proposals must be submitted in sealed form as per the outlined procedures, and the truck must be delivered for performance within Woodstock, Virginia. The contract is administered by the Town of Woodstock in the Commonwealth of Virginia, with Tammy DePhillip serving as the point of contact for inquiries, reachable via phone at 540-459-3621 or email at tdephillip@woodstockva.gov. There is no set-aside designation specified for this procurement, and no NAICS code is provided. The bidding process is open to all qualified vendors without restrictions based on business size or category. Interested parties are directed to the online vendor portal for additional details and submission guidelines.

Town of Woodstock

POSTED

DEADLINE

Truck-Mounted Aerial Platform Lift Supply and DeliveryThe contract calls for the supply, assembly, and delivery of a truck-mounted aerial platform lift with a 62-foot working height, fully compliant with ANSI A92.2 standards and specified hydraulic system requirements. The equipment must be domestically manufactured and ready for immediate deployment, with all components meeting rigorous safety and performance benchmarks. The assembly process must be completed prior to delivery to ensure operational readiness upon arrival at the designated location. This subcontract, posted by the Mississippi Department of Transportation on July 23, 2026, requires responses by August 12, 2026, under NAICS code 336120 for motor vehicle body manufacturing. While no specific place of performance or point of contact is listed, the scope implies delivery statewide to support state infrastructure and maintenance operations. The bidding process is open without set-aside restrictions, and interested parties must submit proposals through the official state procurement portal by the stated deadline to qualify for award consideration.

MS DEPT of TRANSPORTATION

POSTED

DEADLINE

Jones County Junior College is seeking unpriced technical proposals for: Tractor Truck and Trailer The deadline for receipt of unpriced technical proposals is August 6, 2026, at 2:00 PM, Central Time. Specifications and detailed instructions regardingJones County Junior College is soliciting unpriced technical proposals for a tractor truck and trailer, with proposals due by August 6, 2026, at 2:00 PM Central Time. The solicitation, identified by number 327-20260714155632 JCJC, was posted on July 23, 2026, and is managed under the Mississippi Department of Finance and Administration’s MPTAP program. Proposals must conform to specified technical requirements outlined in the full solicitation document, and all submissions should be directed according to the provided instructions. The contract opportunity is targeted for performance within Mississippi, though no specific city or zip code is listed for the place of performance. The solicitation does not designate a set-aside classification and is open to all qualified responders. The official posting and detailed information can be accessed through the Mississippi government contract portal using the provided URL.

POSTED

DEADLINE

European 4x2 Tractor Truck Supply and DeliveryThe contract entails the procurement and delivery of a European-spec 4x2 heavy-duty tractor truck with a minimum engine output of 500 horsepower and a gross vehicle weight rating of at least 85,000 pounds. The vehicle must be certified to meet ADR EX/III standards for the transport of dangerous goods and fully compliant with current European emissions regulations. All components and systems must conform to European technical specifications and safety requirements, ensuring seamless integration into international logistics networks. The truck must be factory-built to these exacting standards, with no modifications permitted post-manufacture that compromise compliance or performance. The solicitation is classified as a subcontract under NAICS code 336120, indicating the focus on motor vehicle manufacturing. It is issued by the Department of Defense through the agency designation FA5682 31 Cons (unit 6102), with a response deadline of August 24, 2026. The place of performance and point of contact details are not specified, suggesting the delivery location and coordination points will be determined later by the contracting office. The procurement is open to qualified suppliers capable of delivering fully compliant vehicles within the required timeline, with no set-aside provisions indicated for specific business categories.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Supply of Commercial Light Trucks (COTS)The contract seeks the procurement and delivery of commercially available light trucks designed for military support operations in challenging humid and corrosive environments, ensuring durability and operational readiness under harsh conditions. These vehicles must meet strict performance standards to function reliably in coastal or tropical regions where exposure to salt, moisture, and extreme weather can accelerate degradation, requiring enhanced materials and protective coatings beyond standard commercial specifications. The solicitation is structured as a subcontract under the NAICS code 336120, indicating a focus on motor vehicle manufacturing, with an emphasis on leveraging existing commercial off-the-shelf (COTS) solutions to reduce development time and cost while maintaining military-grade reliability. The opportunity was posted on July 23, 2026, with a response deadline of August 12, 2026, limiting the window for vendor submissions to approximately three weeks. Procurement is being handled by Navfacsyscom Far East on behalf of the Department of Defense, and while specific performance locations are not detailed, operations are anticipated to occur within the Pacific theater, where environmental conditions are most demanding. There is no set-aside designation specified, meaning the contract is open to all eligible suppliers regardless of size or business type, emphasizing competitive bidding based on technical compliance, delivery timelines, and cost-effectiveness. The contract requires vendors to provide fully configured, mission-ready vehicles with appropriate documentation and warranties, ensuring seamless integration into existing military logistics and maintenance frameworks.

Navfacsyscom Far East

POSTED

DEADLINE

Refuse Collection Truck with Rear Loader Attachment.The contract requires the procurement of a single refuse collection truck with a rear loader attachment, along with comprehensive training, certification, and a two-year advanced commercial warranty covering parts and labor, all as specified in Attachment 1, the Salient Characteristics document. The truck must feature a medium-length cab, a payload capacity of approximately 8.5 metric tons, three axles, and a minimum of 400 horsepower with color options limited to white or orange; the cabin must include air conditioning, a fine dust and pollen filter, a minimum seven-inch monitor, and heatable and electrically adjustable rear-view mirrors. The vehicle and attachment must be manufactured in the United States, a Qualifying Country, or a Designated Country; products originating from a Covered Foreign Country are unacceptable. Title transfers to the Government upon acceptance at the physical delivery location, Smith Barracks in Baumholder, Germany, and delivery is required no later than March 1, 2027. The Contractor bears all shipping costs and risk of loss until delivery under FOB Destination OCONUS terms, and must provide TÜV inspection documentation, truck permission documents, and two sets of operating instructions and spare parts lists in German. The equipment must be delivered ready for operation, and all items must be uniquely identified using MIL-STD-130-compliant two-dimensional data matrix symbology and labeled according to MIL-STD-129. The contract is awarded on a Firm Fixed Price basis under the Lowest Price Technically Approved Product evaluation method, with both technical compliance and Supplier Performance Risk System (SPRS) risk scores serving as mandatory pass/fail gates. Quotes must strictly conform to Attachment 1, and failure to meet any technical requirement or receipt of a Yellow, Red, or Grey SPRS risk score results in automatic disqualification. The Government reserves the right to inspect and accept items at the delivery site and may require repair, replacement, or reperformance of nonconforming items without cost increase, or seek equitable adjustment if correction is not feasible. Invoicing is exclusively through WAWF/PIEE with a supplemental PDF invoice required for the Contracting Officer and COR, and payment follows Prompt Payment Act guidelines. All quotes must be submitted electronically via email in Word, Excel, or PDF format by August 7, 2026, at 8:00 AM CEST, with company identifiers restricted to the cover page and Excel files required to be formula-driven and unlocked. The Contractor must comply with stringent federal acquisition regulations, including deviations

0409 Aq Hq Contract

POSTED

DEADLINE

Purchas of Refuse Truck at Camp Zama, JapanThe U.S. Government plans to award a firm-fixed-price contract for the purchase of one rear-hopper refuse truck to be delivered directly to Camp Zama, Japan, under the solicitation number FA520926Q0073. The anticipated award date is 14 August 2026, and the requirement is being sourced directly from suppliers in accordance with FAR 12.201-1(c)(2), without a competitive solicitation. The contractor is responsible for ensuring the truck arrives undamaged, with any transit damage repaired or replaced at no cost to the government. The vehicle must comply fully with Japanese road regulations and safety standards, and the contractor must conduct a test run and make all necessary adjustments to guarantee full operational readiness upon delivery. In addition to delivery and testing, the contractor must provide basic operational training in Japanese to U.S. Government Japanese employees at the time of delivery. A minimum one-year on-site commercial warranty is required, and the contractor must maintain the ability to provide authorized on-site maintenance and ongoing support. To facilitate timely warranty service, training, and compliance, offerors are mandated to possess a Japanese CAGE code and hold all necessary licenses to perform work within Japan. The contract will be performed entirely in Japan, and inquiries or communications should be directed to the primary point of contact, Anju Bilyk, or secondary contact, Keiko Osawa. The North American Industry Classification System code for this requirement is 336120, and the place of performance is Zama, Kanagawa Prefecture, Japan.

FA5209 374 Cons Pk

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

Warranty Administration and Service Network SupportThis contract establishes a 3-year or 36,000-mile bumper-to-bumper warranty and a 5-year or 60,000-mile powertrain warranty, covering all necessary service and replacement parts to ensure comprehensive vehicle protection. The scope includes full warranty administration and robust service network support to maintain consistent, high-quality customer service across the designated coverage period and mileage limits. The effort is structured as a subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 811111 indicating automotive repair and maintenance as the primary function. Performance is centered at Fort Moore, Georgia, where the contractor will be expected to fulfill all warranty obligations and coordinate with local service centers to ensure timely and effective resolution of claims. The subcontract is being solicited by the Department of Defense under agency FA4830 23 Cons Cc, with a response deadline of August 4, 2026, and is positioned to support military vehicle maintenance operations through a designated small business partner.

General Automotive Repair

POSTED

DEADLINE

Vehicle Delivery and Logistics (FOB Destination)The contract involves the transport of a completed bus to Moody Air Force Base in Georgia under FOB Destination terms, meaning delivery and associated responsibilities, including risk and cost, transfer to the government only upon arrival at the destination. The contractor must coordinate all logistics to ensure safe and timely delivery while securing necessary access permissions for entry onto the military installation, which requires strict compliance with base regulations and procedures. This is a small business set-aside subcontract under NAICS code 484220, exclusively available to small businesses, as defined by the SBA, with the opportunity posted on July 24, 2026, and responses due by August 4, 2026, with performance located at Fort Moore, Georgia, 31699.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

OEM Documentation and Digital Manual PreparationThe contract titled OEM Documentation and Digital Manual Preparation is a small business set-aside subcontract under NAICS code 541430, issued by the Department of Defense through the FA4830 23 Cons Cc office. It requires the production of comprehensive original equipment manufacturer operation and maintenance manuals in both printed form and digital formats including PDF and USB delivery. The work is to be performed at Fort Moore, Georgia, with a response deadline of August 4, 2026, and the opportunity was posted on July 24, 2026. All eligible bidders must be small businesses as defined by the Small Business Administration, with the set-aside reserved exclusively for total small business participation under FAR 19.5. The contract emphasizes the need for accurate, technically precise documentation that meets industry standards for usability and compliance across both physical and electronic media.

Graphic Design Services

POSTED

DEADLINE

Emergency Exit and Safety Systems Compliance InstallationThe contract focuses on the installation and certification of functional emergency exits, including roof hatches, side doors, and push-out windows, in full compliance with Federal Motor Vehicle Safety Standard 217. This work is a subcontract under a Total Small Business Set-Aside, ensuring that only small business entities are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 811191 designates the scope to automotive repair and maintenance services, indicating the nature of the technical installation and safety certification tasks required. Performance of the work is specifically tied to Fort Moore, Georgia, with a clear deadline for proposal submission on August 4, 2026. The contracting activity falls under the Department of Defense, with the sponsoring office identified as FA4830 23 Cons Cc, signaling the project’s military or defense-related context and stringent regulatory requirements for safety and compliance.

Automotive Oil Change and Lubrication Shops

POSTED

DEADLINE

Commercial Vehicle Painting and Custom Livery ServicesThe contract involves the painting of a commercial vehicle in Oxford White with a durable, OEM-level finish specifically designed for military fleet operations, ensuring long-term resistance to environmental stressors and maintaining high aesthetic and protective standards. The work must meet rigorous quality benchmarks suitable for deployment in demanding conditions, with attention to surface preparation, coating integrity, and consistency across all painted surfaces. The scope is limited to vehicle livery application and does not include structural modifications or additional customizations beyond the specified color and finish requirements. This is a total small business set-aside under the SBA program, classified under NAICS code 811192 for commercial vehicle painting services, and is issued by the Department of Defense through the FA4830 23 Cons Cc office. The opportunity was posted on July 24, 2026, with a firm response deadline of August 4, 2026, at 6:00 PM Eastern Time. Performance of the contracted work is required at Fort Moore, Georgia, with a zip code of 31699. The contract type is a subcontract, indicating it supports a larger procurement effort within the military logistics or vehicle maintenance framework. All bidders must qualify as small businesses as defined by SBA standards to be eligible for award.

POSTED

DEADLINE

Vehicle Interior Components SupplierThe contract requires the supply and installation of slip-resistant rubber flooring and durable vinyl or heavy-duty cloth seating for all passenger positions in vehicles, ensuring safety and long-term functionality under demanding conditions. Work must be completed in accordance with specifications for material durability, installation standards, and compliance with military or defense-related operational environments, with performance centered at Fort Moore, Georgia. The procurement is issued as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, as defined by the Small Business Administration. The North American Industry Classification System code 316998 applies, indicating the focus on other miscellaneous textile product mills, relevant to the production of specialized interior automotive components. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 4, 2026, at 6:00 PM. The contracting activity falls under the Department of Defense, specifically managed by FA4830 23 Cons Cc, and the awarded contract will support federal vehicle interior upgrades. No point of contact information is provided publicly, and all inquiries must be handled through the official SAM.gov portal linked in the posting. Bidders must be certified small businesses in good standing and prepared to deliver fully installed components meeting stringent quality and safety benchmarks for military and defense applications.

All Other Leather Good and Allied Product Manufacturing

POSTED

DEADLINE

Climate Control System SupplierThe contract requires the supply and installation of a dual-zone climate control system featuring heavy-duty cooling capabilities designed specifically for both passenger and driver zones, ensuring optimal thermal comfort in demanding operational environments. The system must meet rigorous performance standards suitable for military-grade applications, with installation to be completed at Fort Moore, Georgia, under the specified technical and quality requirements. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, adhering to FAR 19.5 guidelines, and is classified under NAICS code 333415 for refrigeration and air conditioning equipment manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 4, 2026, and is issued by the Department of Defense through the FA4830 23 Cons Cc agency office, though no point of contact is listed and detailed location information beyond the ZIP code is omitted.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Safety and Driver Assistance Systems SupplierThe contract seeks a small business to supply and integrate advanced safety and driver assistance systems including anti-lock braking systems, electronic stability control, airbags, tire pressure monitoring systems, and backup cameras for defense-related vehicle platforms. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only eligible small businesses may bid, in accordance with FAR 19.5 rules. The NAICS code 336320 classifies this as automotive safety system manufacturing, and the work must be performed at Fort Moore, Georgia, with a tight response deadline of August 4, 2026. The contracting activity is under the Department of Defense, specifically identified as FA4830 23 Cons Cc, though no point of contact or detailed address information is provided. All proposals must be submitted by the stated deadline to be considered for award, and the systems delivered must meet rigorous military-grade standards for reliability and performance under operational conditions.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Towing Equipment and Trailer Brake System SupplierThe contract seeks a supplier to provide and integrate a factory-installed Class III or IV towing package, which must include a 7-pin wiring harness and a trailer brake controller, ensuring full compatibility and seamless operation with the target vehicle platform. The equipment must be installed at the manufacturing level and meet all performance, safety, and technical standards required for military-grade towing applications. The work is subject to strict integration protocols to guarantee reliability under operational conditions, with all components fully certified and documented for compliance. This opportunity is a total small business set-aside under NAICS code 336340, restricted to small business concerns as defined by the SBA, and is part of a Department of Defense effort managed by FA4830 23 Cons Cc. The place of performance is identified as Fort Moore, Georgia, with a submission deadline of August 4, 2026, at 6:00 PM Eastern Time. The solicitation is posted on SAM.gov and requires proposers to demonstrate technical capability, production capacity, and experience in supplying similar towing systems for defense or heavy-duty commercial applications. All responses must adhere to federal acquisition requirements and include documentation of small business eligibility.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Commercial Passenger Shuttle Bus Manufacturer or DistributorThe contract seeks the supply and delivery of one fully assembled, factory-tested 15-passenger shuttle bus that meets all specified technical requirements for immediate operational use. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, with the North American Industry Classification System code 336111 identifying it within the motor vehicle manufacturing sector. The solicitation is issued by the Department of Defense through the FA4830 23 Cons Cc office, with performance required at Fort Moore, Georgia, ZIP code 31699. Responses must be submitted by August 4, 2026, at 6:00 p.m., following the posting date of July 24, 2026. The bus must be delivered in working condition, compliant with all applicable standards, and ready for service upon arrival without additional assembly or modification.

Automobile Manufacturing

POSTED

DEADLINE

15 Person Shuttle BusThe U.S. Air Force is soliciting quotes for one 15-passenger shuttle bus to support the 23 Force Support Squadron at Moody Air Force Base, Georgia, with the vehicle required to meet all technical specifications outlined in the Statement of Work, including safety, comfort, and performance standards. This solicitation, identified as FA483026Q0048, is a total small business set-aside under NAICS code 336110, restricting eligibility to qualified small businesses. All responses must be submitted electronically no later than 10:00 AM EST on August 4, 2026, and must include the RFQ number and title, with submissions sent to both the primary and alternate points of contact. Questions must be submitted by 2:00 PM EST on July 28, 2026, in a Word document or PDF, and responses to inquiries will be posted via amendment on SAM.gov on July 30, 2026, with vendors responsible for monitoring updates. Funds are not currently available for this procurement, and no award will be made until funding is secured; the government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs. The place of performance is Fort Moore, Georgia, and all correspondence must be directed to SSgt Landon Docherty as the primary point of contact, with TSgt Jeffrey Moran as the alternate.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

DEADLINE

72-Passenger BusThe solicitation seeks a single 72-passenger Multi-Function School Activity Bus (MFSAB) to support the 23rd Force Support Squadron at Moody AFB, Georgia, with all technical specifications outlined in the Statement of Work requiring strict compliance. The requirement is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, and the NAICS code is 336110 for motor vehicle manufacturing. Quotes must be submitted electronically by 10:00 AM EST on August 4, 2026, referencing the solicitation number FA483026Q0047 and sent to both designated points of contact, with any inquiries required to be submitted no later than 2:00 PM EST on July 28, 2026, via a Word document or PDF attachment. All responses to questions will be publicly posted on SAM.gov via amendment on July 30, 2026, and offerors are responsible for monitoring updates to the solicitation. Funds are not currently available for this procurement, and no award will be made until appropriated funds are secured; the government retains full rights to cancel the solicitation at any time prior to or after the submission deadline without any obligation to reimburse offerors for associated costs. The place of performance is Fort Moore, Georgia, with the contracting office located at Moody AFB, and all correspondence must be directed to the primary point of contact, SSgt Landon Docherty, and alternate, TSgt Jeffrey Moran, using the provided email addresses and phone numbers. The deadline for responses has been posted as 6:00 PM EST on August 4, 2026, but the solicitation specifies submission by 10:00 AM EST on that date, and offerors must adhere strictly to the stated time to remain eligible.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

DEADLINE