Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, NONMETAL

Active
SPE7M4-26-T-398CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-398C, seeks the procurement of 52 nonmetallic hose assemblies, identified by NSN 4720-01-419-1660. The requirement falls under NAICS code 332919 and specifies a delivery timeline of 168 days after order. The place of performance is located in Barstow, California, and quotes must be submitted via the DIBBS system by the deadline of September 21, 2026. The contract is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, this procurement involves technical data subject to export control under ITAR or EAR regulations, meaning distribution is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Compliance with DFARS 252.225-7048 is mandatory for the handling of this technical data.

General Info

DoD seeks 52 nonmetallic hose assemblies for delivery to Barstow, California by 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-398C Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONMETALLIC
HOSE ASSEMBLY, NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4720-01-419-1660 Quantity: 52 EA Purchase Request: 7018269886QTY: 52 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
47--REPAIR KIT,PIPE,EME
Solicitation # SPE7M3-26-T-9062
This contract is for the procurement of 128 emergency damage control pipe repair kits, identified by NSN 4730-01-414-6976 and part number BV-USA-2. The order is a total small business set-aside issued by the Department of Defense Fluid Handling Division, with a required delivery date of September 17, 2026, and a delivery window of 57 days after order. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Suppliers must adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Because the materials are classified as hazardous, contractors are required to submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to the award. Additionally, the supplier must ensure employees are trained on the current OSHA hazard communication requirements and comply with DLA packaging requirements for procurement.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
Federal
47--CONNECTION,FLEXIBLE
Solicitation # N0010426QYAFK
This solicitation, issued by the Navsup Weapon Systems Support Mech for the Department of Defense, seeks the manufacture and supply of flexible connections. The contract is a fixed-price agreement that includes a one-year warranty from the date of delivery and is designated as a rated order under the Defense Priorities and Allocations System for national defense. A key provision allows the government to exercise an option for increased quantity within 365 days of the award, with evaluation based on the lowest aggregate total price. The requirements strictly prohibit the use of metallic mercury to prevent contamination of submarine and surface ship systems. Contractors must provide pressure and hydrostatic testing results with their shipments and adhere to MIL-STD-130 for marking and MIL-STD-2073 for packaging. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization to prove they are an authorized distributor. The award will be issued bilaterally, requiring written acceptance from the contractor.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332919
New
Federal
CONNECTION,FLEXIBLE
Solicitation # N0010426QFD29
The contract is for the procurement of 11 units of NSN 7HH 4730-01-142-8911, a flexible connection classified as SPECIAL EMPHASIS Level I due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The solicitation number is N0010426QFD29, issued on April 23, 2026, with a response deadline of May 8, 2026, and is managed by the Naval Supply Systems Command Weapon Systems Support Mechanic in Mechanicsburg, Pennsylvania. Delivery is required within 365 days of contract award under FOB Destination terms, with all items to be shipped to a designated DoD Activity Address Code location. The product must conform to specific engineering drawings such as 300057 and 299944 and be accompanied by a Certificate of Compliance and Inspection/Test Plans submitted via the Electronic Commerce Data System (ECDS). Packaging and marking must strictly comply with MIL-STD-2073-1 for all OCONUS shipments and CONUS system stock, while ASTM D3951-18 may be used for CONUS immediate-use items only with Government approval. All containers must be marked per MIL-STD-129, including procurement instrument identifiers, CLINs, SubCLINs, and DLR labels where applicable. Barcoding must follow MIL-STD-129 with Data Matrix codes containing Unique Item Identification elements. Shelf-life markings must ensure at least 85% of the Navy-assigned shelf-life remains upon receipt. The contract mandates rigorous quality assurance through 100% inspection for traceability and certification, zero defect acceptance criteria, and adherence to MIL-STD, ANSI/ASQ-Z1.4, and ISO-9001 standards. Contractors must implement NIST SP 800-171 controls to protect Controlled Unclassified Information and report cyber incidents under 252.204-7012, with these requirements flowing down to subcontractors. Mercury and mercury-containing compounds are strictly prohibited, and material must comply with NAVSEA 0948-LP-045-7010, including restrictions on marking material designators. First Article Testing is required to validate manufacturing capability. All data deliveries, including waivers and technical documentation, must be submitted via
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332919
New
Federal
VACUUM BREAKER ASSY
Solicitation # SPRMM126QGF68
This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a Vacuum Breaker Assembly. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include strict adherence to marking standards under MIL-STD-130 and packaging guidelines per MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must use the PIEE-WAWF system for electronic invoicing and receiving reports. The agreement mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs. Quality assurance is the responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Additionally, the contract specifies a strict protocol for design or part number substitutions, requiring specific code notifications and government approval for any changes beyond simple part number updates.
SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
48--ACTUATOR,HYDRAULIC-
Solicitation # N0010426QYAFY
This contract is a solicitation issued by the Navsup Weapon Systems Support Mech for the manufacture and supply of hydraulic actuators. The requirement is processed under Emergency Acquisition Flexibilities and is DPAS DO certified for national defense. Key technical requirements include strict adherence to mercury-free standards for use on submarines and surface ships, physical identification per MIL-STD-130, and packaging according to MIL-STD 2073. A one-year warranty is required from the date of delivery, and the government reserves the right to exercise an option for increased quantity within 365 days of the award. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization on the OEM's letterhead to be considered. The contract mandates a bilateral agreement for execution and requires the contractor to maintain inspection records for 365 days following final delivery. All substitutions in design or part numbers must be approved by the Contracting Officer via a specific coding system. Payment and receiving reports are to be handled through the Wide Area Workflow system.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332919
New
Federal
TAILPIECE,UNION
Solicitation # N0010426QFF42
This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its role in a crucial shipboard system where failure could result in serious injury or loss of the vessel. The contract requires strict adherence to Naval Sea Systems Command drawings and specifications, including the use of ASTM-B369 UNS C96400 material. Key technical requirements include radiographic shooting sketches, production radiography, dye penetrant inspection, and hydrostatic testing. All internal threads must be cut rather than cold-formed, and the order is designated as a DO-rated order under the Defense Priorities and Allocations System. The contractor must follow a rigorous quality assurance process, including the submission of certification data via Wide Area Workflow (WAWF) and the provision of a Special Emphasis Certificate of Compliance. Final delivery of material is required within 365 days of the contract's effective date, with specific milestones for the submission and approval of radiographic sketches and production radiography. The contract also mandates strict configuration control, requiring Engineering Change Proposals for any modifications and the submission of qualification data for all welding and brazing procedures.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332919
New
DIBBS
59--SWITCH,PRESSURE
Solicitation # SPE7M8-26-T-6631
This contract, solicitation number SPE7M8-26-T-6631, is issued by the Department of Defense Electrical Devices Division for the procurement of 46 pressure switches, identified by NSN 5930-01-410-9221 and Detroit Switch Inc part number 222-10NB16-2223676. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is January 11, 2027, with a delivery window of 75 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Configuration change management and engineering change proposals are required for any variances, and the contract specifies that government identification must be removed from any non-accepted supplies.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
Federal
VALVE,CONTROL
Solicitation # N0010426QFD90
This contract is a firm-fixed-price purchase order for a control valve designated as Special Emphasis SUBSAFE/Non-Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must be refurbished to comply with CAGE 78062, drawing 20380-001, and NAVSEA Maintenance Standard MS 5560-081-055 Rev B CHG 4, with the prime contractor required to be the original equipment manufacturer for sole-source repair. All components must bear a permanently marked unique serial number, traceable through documentation, and any refurbishment must retain or augment serial numbering to ensure continuity. Strict quality assurance protocols are mandated, requiring compliance with ISO-9001, ISO-10012, and ISO/IEC 17025, or the alternate MIL-I-45208 and MIL-STD-45662 systems. Government quality assurance is performed at source, with full access to facilities and records, and all subcontracting must adhere to the same quality and traceability requirements. Non-destructive testing must conform to specified standards including MIL-I-6868, ASTM-E1417, ASTM-E1444, and SAE-AMS-STD-2154, with certification records submitted via WAWF at PORT_PTNH_WAWF_Notification@navy.mil. The contractor is required to submit welding procedures and qualification data for review and approval before any welding or brazing occurs, following S9074-AQ-GIB-010/248 or 0900-LP-001-7000 as applicable, with 48-hour notification to DCMA for new procedure qualifications. Each shipment must be accompanied by a Certificate of Compliance and Certificate of Tests verifying all inspections, tests, and repairs, with zero defect acceptance criteria applied for lot inspection, and sample sizes of eight units minimum for lots of fifty or fewer, or 100% inspection for smaller lots. The contract requires full traceability to material certifications, prohibits intentional use of mercury, and mandates that all waivers or deviations be submitted electronically through ECDS and cleared by the Contracting Officer with classification as Critical, Major, or Minor. Additionally, the contract enforces Buy American requirements and compliance with Defense Priorities and Allocations System regulations, as it is rated for national
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
Federal
VALVE,DIAPHRAGM CON
Solicitation # SPRMM126QMJ18
This solicitation, issued by DLA Mechanicsburg under Emergency Acquisition Flexibilities authority, seeks quotes for the manufacture and supply of a diaphragm control valve. The procurement will be awarded based on Lowest Price Technically Acceptable criteria. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. Contractors must provide the Original Equipment Manufacturer's CAGE code and part number if they are not the manufacturer, and authorized distributors must provide proof of authorization on company letterhead. The contract mandates the use of the PIEE-WAWF system for electronic submission of combined invoice and receiving reports. Inspection and acceptance are generally conducted at the source. Strict guidelines are established for design or part number substitutions, requiring specific code notifications and government approval. Additionally, the contract includes standard federal clauses regarding equal opportunity, cybersecurity maturity model certification, and security prohibitions.
SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,GATE
Solicitation # SPRMM126QMC04
This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a gate valve identified by CAGE code 57574 and part number P3-14155-GR1. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include strict adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. If the offeror is not the original equipment manufacturer, they must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. The agreement mandates the use of the PIEE-WAWF system for submitting combined invoice and receiving reports. Contractors are prohibited from changing production facilities without written approval from the Contracting Officer and must follow specific protocols for reporting design or part number changes. Quality assurance is the responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. All contractual communications and documents are considered issued upon electronic transmission or mailing.
SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
FPAIC AUGMENTATION PARTS
Solicitation # FA527026QA058
FA5270 18 Cons Pk

POSTED

about 2 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332919
New
DIBBS
Supply of Pipe Cross Assemblies (NSN 4730-01-541-8067)
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
Supply of Fluid Filter Elements (NSN 4330-01-052-0080)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
Supply of Small DR Assembly No 5 (NSN 2040014384444)
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,NONMETAL
Solicitation # SPE7M4-26-T-404J
This contract, identified as SPE7M4-26-T-404J, is a total small business set-aside for the procurement of 100 nonmetallic hose assemblies under NSN 4720-12-323-8769. The requirement is issued by the Department of Defense Fluid Handling Division, with Vincorion LLC and Vincorion Power Systems GmbH listed as sources for part number 355.02.0018. The total quantity of 100 units must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of March 6, 2027. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination. The procurement is managed under NAICS code 332999 and includes a delivery timeline of 102 days.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
47--PLUG,TUBE FITTING,T
Solicitation # SPE7M3-26-T-9067
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 41 threaded tube fitting plugs under NSN 4730-01-214-0258. The contract requires adherence to Eaton internal drawing PN A40 and cross-reference PN 169088-1, with a delivery timeline of 49 days after receipt of order. Performance is designated for Cherry Point, and the request is managed under solicitation number SPE7M3-26-T-9067. Strict compliance is required for several regulatory standards, including CMMC Level 2 certification for third-party assessments and DLA packaging requirements. Because the item involves technical data subject to ITAR or EAR export controls, access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,NONMETAL
Solicitation # SPE7M4-26-T-404N
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of three nonmetallic hose assemblies under part number 4720-01-349-9895. The contract requires delivery within 511 days after the order is placed and is associated with solicitation number SPE7M4-26-T-404N. Performance will take place at Robins Air Force Base. The agreement is subject to strict technical and quality standards, including specific DLA packaging requirements, origin inspection and acceptance, and physical item marking. Notably, the contract mandates compliance with Cybersecurity Maturity Model Certification Level 2 and involves covered defense information. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete required training and questionnaires to access the data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,METALLIC
Solicitation # SPE7M4-26-T-404L
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 181 metallic hose assemblies under part number 4720-01-470-9852. The contract requires delivery within 433 days after the order is placed and is categorized under NAICS code 332999. Performance is designated for New Cumberland, Pennsylvania. Strict compliance is required regarding cybersecurity and export controls. Contractors must be CMMC Level 2 certified through a C3PAO and adhere to DLA packaging requirements. Because the technical data is subject to ITAR and EAR regulations, access is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
20--SMALL DR ASSY NO 5
Solicitation # SPE7M4-26-T-405Q
Solicitation SPE7M4-26-T-405Q is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two Small DR Assy No 5 units, identified by NSN 2040014384444. The items are associated with Lake Shore Systems, Inc. part numbers 7D3-05185 and 7D5-04999. The required delivery date is February 6, 2028, with shipping destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, while palletization must comply with DLA requirement RP001. Special restrictions include the prohibition of intentionally added mercury per NAVSEA 5100-003D and compliance with the Buy American Act and Berry Amendment. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted via the DIBBS portal by September 21, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
43--FILTER ELEMENT,FLUID
Solicitation # SPE7M4-26-T-404Y
This solicitation, numbered SPE7M4-26-T-404Y, is issued by the Department of Defense Fluid Handling Division for the procurement of ten fluid filter elements, identified by NSN 4330-01-052-0080. The items are critical application components corresponding to Tate and Andale drawing G12379 Rev 2 and part number G12379-77REV3 for the Model 103BF duplex lube oil filtering assembly. This is a Women-Owned Small Business set-aside under NAICS code 333998, with a required delivery date of June 19, 2027, and a delivery timeframe of 283 days after order. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. It includes specific technical requirements regarding the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and the handling of covered defense information are required. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332721
New
DIBBS
Supply of Warning Streamer Pins (NSN 2090-01-694-9072)
Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 327999
New
DIBBS
Nonmetallic Hose Assembly Manufacturing/Supply
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333993
New
DIBBS
Supply of Packing Retainers (NSN 5330-00-171-6693)
Packaging Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS