Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Humidity Curing and Storage Chamber Manufacturing

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of newly fabricated Upright Humidity Curing and Storage Chambers for prime contractors working on Illinois Department of Transportation projects. The contractor is responsible for fabricating stainless steel cabinets according to ASTM C 511 standards, integrating environmental controls to maintain a temperature of 23.0 ± 2.0 °C and humidity levels above 95%. Each unit must include at least 12 shelves with a total capacity for 48 molds. The scope of work includes the delivery of completed and warranted chambers to IDOT laboratories, with the place of performance located in Springfield, Illinois. Managed by the Finance and Administration agency, this project falls under NAICS code 334511 and was posted on November 18, 2025.

General Info

Manufacture and supply ASTM C 511 humidity curing chambers for IDOT laboratories.

Agency

Illinois → Finance & Administration

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

Springfield, IL, 62704, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-494DOT-FINAD-B-49963.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-494DOT-FINAD-B-49963 | Upright Humidity Curing and Storage Chambers FY26

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 18

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Finance & Administration

ContactsNo contacts available

OfficeN/A

Organization / AgencyIllinois → Finance & Administration

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies newly manufactured Upright Humidity Curing and Storage Chambers for prime contractors on Illinois Department of Transportation (IDOT) projects. Fabricates stainless steel cabinets per ASTM C 511, integrating environmental controls to maintain temperature at 23.0 ± 2.0 °C and humidity above 95%. Installs 12+ shelves with 48-mold capacity. Delivers completed, warranted chambers to IDOT laboratories.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A6-27-T-7074

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-0979

Solicitation SPE7M1-27-T-0979, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of two Chem Cassettes (NSN 6665015436452), identified as critical application items associated with Honeywell Analytics Distribution P/N 700347. The requirement consists of two line items, each for one unit, with a required delivery date of October 13, 2026, and a delivery window of 20 days. The items are shipped FOB Origin and are subject to inspection and acceptance at the destination in Eastover, South Carolina. These materials are subject to strict storage and handling requirements, including a non-extendable three-month shelf-life and a mandate for refrigerated storage. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific compliance required for hazardous materials under IP025 and DLA packaging requirements under RP001. The procurement incorporates various federal regulations, including DFARS 252.204-7012 for safeguarding covered defense information and the HUBZone price evaluation preference. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

RETICLE ASSEMBLY, OPTIC

Solicitation # SPE4A7-27-T-1065

Solicitation SPE4A7-27-T-1065, issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div, is a request for the procurement of two reticle assemblies for optical instruments, identified by NSN 5855016991892. The contract is categorized under NAICS code 334511 and is eligible for automated award, with all quotes required to be submitted via the DLA Internet Bid Board System. The required delivery date is July 26, 2027, with a need ship date of April 6, 2027, and shipping terms are established as FOB Origin. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

INJECTOR, INTRAOSSEOUS

Solicitation # SPE2DS-27-T-1029

This solicitation, issued by the Department of Defense through the DLA Troop Support Medical Supply Chain, seeks the procurement of one Bone EZ-IO G3 Powerdriver intraosseous injection gun (NSN 6515-01-571-3152). The device must meet specific technical requirements, including a weight of 380g, dimensions of 6.5 by 4.5 by 2.5 inches, and an operational temperature range of -20 to 50 degrees Celsius. A critical quality requirement is the shelf life, which must be 120 months, with no more than 18 months having elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within 20 days after receipt of the order, with the destination for both inspection and acceptance located at Fort Bliss, Texas. The contract is governed by a comprehensive set of FAR and DFARS clauses, including strict adherence to the Buy American Act, the Berry Amendment, and various cybersecurity standards such as NIST SP 800-171 and DFARS 252.204-7012. Packaging must comply with ASTM D3951 and MIL-STD-129, while medical marking must follow the Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied and must provide full technical data for any alternate products offered. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

TRAP, WATER, ANESTHESIA

Solicitation # SPE2DS-27-T-0848

Solicitation SPE2DS-27-T-0848 is a fixed-price procurement issued by the DLA Troop Support Medical Supply Chain for four packages of anesthesia monitor water traps, identified by NSN 6515-01-586-5431. These disposable plastic traps feature two hydrophobic microporous PFE membranes with a 0.2 micrometer pore size, designed to be impermeable to bacteria, germs, and condensed water for use with anesthetic agent monitor NSN 6515-01-502-2117. The items must have a shelf life of 152 months, with no more than 22 months elapsed from the date of manufacture to the date of government delivery. Delivery is required within 20 days ADO to the USS George H W Bush CVN 77 in FPO AE 09513, with FOB and inspection/acceptance points set to destination. Compliance requires adherence to the DLA Master List of Technical and Quality Requirements (RA001) and DLA packaging requirements (RP001). Packaging must follow ASTM D3951, and marking must comply with Medical Marking Standard No.1, which supersedes MIL-STD-129. Offerors must provide source and part number details and are subject to the Buy American Act and Berry Amendment restrictions. Technical acceptability depends on the submission of Safety Data Sheets for hazardous materials and the exclusion of additive manufacturing processes. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE2DS-27-T-0791

Solicitation SPE2DS-27-T-0791 is a fixed-price request from the Department of Defense, specifically the DLA Troop Support Medical Supply Chain, for the procurement of two reusable 7 mm Richards ear speculums (NSN 6515-01-588-0377). These stainless steel, ebony-finish devices are designed to fit most standard otoscopes and are regulated by the FDA. The delivery is required within 20 days after order, with a final delivery date of October 21, 2026, and the place of performance located at Fort Wainwright. Bidders must provide the source and part number being supplied and submit a complete data package if offering alternate parts. The contract adheres to strict quality and packaging standards, requiring compliance with DLA Packaging Requirements (RP001) and Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity safeguarding standards. The response deadline for quotations is October 26, 2026, and the award process may utilize the HUBZone price evaluation preference.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

SUTURE, ABSORBABLE, SURG

Solicitation # SPE2DS-27-T-1021

Solicitation SPE2DS-27-T-1021 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of one box of absorbable surgical sutures. The required item consists of natural plastic glycolide lactide copolymer, size 4-0, 27 inches in length, with a B3 1/2 circle configuration and 36 units per box, identified by NSN 6515-01-604-1967. The delivery is required within 20 days after receipt of order, with the place of performance and delivery designated as FPO AE 09595-2200. The contract mandates a non-extendable shelf life of 60 months and requires strict adherence to DLA packaging and marking standards, including ASTM D3951, MIL-STD-129, and Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and are required to submit quotes via DIBBS. Payment and invoicing must be processed through the Wide Area WorkFlow system. The procurement is subject to various federal and defense regulations, including NIST SP 800-171 assessment requirements and prohibitions on certain telecommunications equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

SWAB, CHEMICAL AGENT SA

Solicitation # SPE7M1-27-T-1678

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

SUPPORT, RADAR SET

Solicitation # SPE4A7-27-T-2224

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-2148

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

MEMORY, PORTABLE, SOLID

Solicitation # SPE8EN-27-T-0178

Solicitation SPE8EN-27-T-0178 is a fixed-price procurement issued by DLA Troop Support for the acquisition of 10 units of portable solid-state memory, identified by NSN 7050-01-577-999도4. The contract is managed under the First Destination Transportation program with delivery set as FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The original required delivery date is March 10, 2027, with a need ship date of April 12, 2027, and a delivery window of 167 days after receipt of order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and ASTM D3951, with palletization following RP001 requirements. Technical and quality standards are governed by the DLA Master List. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and restrictions on covered defense telecommunications equipment. The assigned NAICS code for this effort is 334511.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 17 hours ago

DEADLINE

SENSING ELEMENT, FIRE D

Solicitation # SPE4A1-27-T-0215

Solicitation SPE4A1-27-T-0215, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of four sensing elements for a fire detector system. The required items are identified as Commercial Off The Shelf (COTS) products, specifically Meggitt Safety Systems Inc part number 3001-176-1050/500-18, under NSN 6340-01-322-8526. This is a Foreign Military Sales requirement for Tunisia, with a required delivery date of October 20, 2026, and a delivery timeframe of five days after receipt of order. Shipping is designated as FOB Origin, with the freight forwarder identified as V. Alexander & Co Inc and the final destination being the Ministere de la Defense Nationale in Bizerte, Tunisia. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment marking. Technical and quality requirements are governed by the DLA Master List, and physical identification must comply with requirement RQ017. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow (WAWF) system. The procurement is categorized under NAICS code 334511 and incorporates various DFARS and FAR clauses regarding cybersecurity, the prohibition of covered telecommunications equipment, and hazardous material identification.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

More opportunities from Illinois → Finance & Administration

Same awarding agency

FY27 D2 Fencing Maintenance and Repair Services

Solicitation # 27-494DOT-FINAD-B-53698

POSTED

about 12 hours ago

DEADLINE

FY27 Culvert Liners

Solicitation # 27-494DOT-FINAD-B-54196

POSTED

DEADLINE

Wood Post SupplyThis subcontract opportunity, titled Wood Post Supply, is issued by the Illinois Finance and Administration agency for the provision of wood posts used in Department of Transportation infrastructure projects. The selected contractor will be responsible for manufacturing wood posts that adhere strictly to agency specifications and ensuring the completed shipments are delivered directly to designated project sites to support prime contractors. The solicitation was posted on October 26, 2026, with a response deadline of November 9, 2026. Classified under NAICS code 423310, this contract focuses on the specialized production and logistical delivery of materials essential for transportation infrastructure development within the state of Illinois.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

DEADLINE

CHANGE ORDER NOTICE: (FY27) Wood Posts (Subject to SBSA)

Solicitation # B-54507

Solicitation B-54507 is a change order notice issued by the State of Illinois for the procurement of wood posts for the Department of Transportation. This notice, posted on October 26, 2026, specifies that the change is germane to the original contract as signed. The procurement is managed by the Finance and Administration agency, with Ashley Murphy and Adam Aldridge serving as the primary points of contact. The response deadline for this action is November 9, 2026. According to the established guidelines, this notice is required to be posted on the Bulletin/BidBuy platform for 14 days. Specific details regarding the contract value, delivery schedules, and evaluation factors were not provided in the available documentation.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

FY27 REBID D9 Barge Rental

Solicitation # 27-494DOT-FINAD-B-54512

The FY27 REBID D9 Barge Rental solicitation, number 27-494DOT-FINAD-B-54512, is issued by the State of Illinois Finance and Administration agency. The response deadline for this opportunity is November 2, 2026, with the procurement managed by the Chief Procurement Office of General Services. The contract is subject to the laws of the State of Illinois and is contingent upon the availability of funds, with the possibility of partial or total funding through federal sources. Vendors must provide comprehensive certifications via the Standard Illinois Certifications V26, covering legal entity status, bribery, felony convictions, and conflict of interest. Key requirements include maintaining insurance for natural disasters and worker's compensation, adhering to prevailing wage laws, and complying with the Illinois Department Human Rights Act. Supplies must be of merchantable quality and free from defects for twelve months, while services must be performed by trained and competent personnel. Payments are processed according to the State Prompt Payment Act, and the state maintains the right to terminate the contract for cause or convenience, the latter requiring thirty days' written notice.

Commercial Air, Rail, and Water Transportation Equipment Rental and Leasing

POSTED

DEADLINE

Security Safety Inspection Decal ManufacturingThis subcontract, managed by the Illinois Finance and Administration agency, involves the manufacturing and supply of specialized safety inspection certificate decals for prime contractors working on Illinois Department of Transportation projects. The deliverables consist of high-durability adhesive labels constructed from polymeric cast film and pressure-sensitive adhesive coating to ensure longevity and adherence. To maintain authenticity and prevent unauthorized duplication, the decals must integrate a specific pantographic tint security feature that reads STATE OF ILLINOIS. The procurement process for these security labels is categorized under NAICS code 323111, with a response deadline set for October 29, 2026.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

FY27 IDOT CO Certificate of Safety Decals- SP

Solicitation # 27-494DOT-FINAD-B-54325

Solicitation 27-494DOT-FINAD-B-54325 is a small purchase contract for the Illinois Department of Transportation (IDOT) to procure a one-time printing of safety inspection certificate decals for commercial vehicles. These pressure-sensitive adhesive decals must feature a pantographic tint reading STATE OF ILLINOIS and a specialized VOID feature that prevents reuse by destroying the decal upon removal. Technical specifications require a finished thickness of 0.004 to 0.007 inches, colors guaranteed not to fade for 12 months, and the inclusion of specific rectangular areas for serial numbers and expiration dates. Each certificate must be protected by a transparent slip sheet with a minimum thickness of 0.003 inches and a scalloped cut for easy removal. The award process heavily weights proposed service efficiency and quality, requiring bidders to submit actual scored samples and paper stock with their bids. To ensure security, vendors must provide a detailed plan for protecting decals against theft or loss, maintain a satisfactory burglar or hold-up alarm system, and insert secret markings to prove the decals were produced in their plant. Deliveries are to be made to the Commercial Vehicle Safety Section in Springfield, Illinois, during specific weekday windows. The contract is subject to the availability of funds and requires compliance with the Illinois Prevailing Wage Act, as well as maintaining general commercial liability insurance of 1 million dollars per occurrence.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Fuel Tank Equipment ProviderThis subcontract agreement appoints a Fuel Tank Equipment Provider to supply and install bulk fuel storage tanks for prime contractors working on Illinois Department of Transportation fueling projects. The provider is responsible for coordinating site visits and completing the installation of operational tanks at the Waterman, Illinois location. A critical component of the agreement is that the provider maintains ownership of the equipment throughout the duration of the lease period. The provider must ensure all installations and operations strictly adhere to Illinois Pollution Control regulations regarding fuel storage. This opportunity, managed by the Illinois Finance and Administration agency under NAICS code 238290, was posted on October 19, 2026, with a response deadline of November 12, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

Cold-Flow Fuel Additive SupplierThis subcontract opportunity is for a Cold-Flow Fuel Additive Supplier to support prime contractors on Illinois Department of Transportation fueling projects. The selected supplier will provide additives designed to improve base fuel cold-flow properties by at least -15 degrees Fahrenheit while incorporating essential deicer properties. All provided additives must strictly adhere to ASTM requirements, and the supplier is responsible for delivering either treated fuel or bulk additive chemicals. Managed by the Illinois Finance and Administration agency, this procurement falls under NAICS code 325199. The solicitation was posted on October 19, 2026, with a response deadline set for November 12, 2026. Interested parties must ensure their submissions are completed by the specified cutoff to be considered for this specialized fueling support role.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Bulk Diesel Fuel SupplierThis subcontract opportunity is for a Bulk Diesel Fuel Supplier to support prime contractors on Illinois Department of Transportation fueling projects. The selected supplier will be responsible for the delivery of Diesel #1 and Diesel #2, ensuring a minimum cetane rating of 43 and Ultra Low Sulfur content not exceeding 15 PPM. All fuel must meet ASTM and state specifications, with delivery performed F.O.B. Destination into storage tanks using bulk fuel transport tankers. Additionally, the supplier is required to provide necessary lab analysis and Safety Data Sheets. Managed by the Illinois Finance and Administration agency under NAICS code 424710, the solicitation was posted on October 19, 2026. Interested parties must submit their responses by the deadline of November 12, 2026, at 3:00 PM.

Petroleum Bulk Stations and Terminals

POSTED

DEADLINE

District 3 Waterman Fuel for Diesel, Biodiesel & Gasoline FY27

Solicitation # 27-494DOT-FINAD-B-54453

Solicitation 27-494DOT-FINAD-B-54453 is an Invitation for Bid issued by the Illinois Department of Transportation to secure the furnishing and delivery of bulk fuel for the IDOT fueling location at 9741 US Highway 30, Waterman, Illinois. The scope of work includes the delivery of Diesel #1, Diesel #2, and Diesel winter additive, with the requirement that the vendor provide and maintain ownership of the fuel tanks throughout the lease period. All fuels must meet current ASTM requirements and Illinois Pollution Control regulations, with specific mandates for a minimum cetane rating of 43 for diesel fuels and a maximum sulfur content of 15 PPM for ultra-low sulfur diesel. The contract will be awarded to the lowest priced responsive and responsible bidder based on the lowest overall total cost, and vendors must bid on all line items to be considered. Bidders are required to submit all documentation, including financial disclosures, a BEP Utilization Plan with a 4% goal for minority, women, and persons with disabilities businesses, and the offer document via the BidBuy portal by November 12, 2026. The vendor must maintain comprehensive insurance coverage, including 1 million dollars per occurrence for general commercial and auto liability, and 2 million dollars in annual aggregate for general liability. Payment is governed by the State Prompt Payment Act, and the contract is contingent upon the availability of funds from the Illinois General Assembly or federal sources.

POSTED

DEADLINE

Hydrostripper and High-Pressure System Maintenance TechnicianThis subcontract for a Hydrostripper and High-Pressure System Maintenance Technician involves providing mechanical repair, replacement, and adjustment services for prime contractors on Illinois Department of Transportation equipment contracts. The scope of work includes performing routine inspections and emergency repairs on specialized machinery, specifically Hydrostrippers, Jet Edge Pump and Motor Systems, Intensifiers, and Ebbco Filtration Systems. The selected provider is responsible for delivering fully operational equipment, submitting completed work orders, and providing monthly warranty reports. Managed by the Illinois Finance and Administration agency under NAICS code 811310, the contract requires strict compliance with the Illinois Prevailing Wage Act. The solicitation was posted on October 15, 2026, with a response deadline of November 4, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Traffic Monitoring Equipment Supply and Maintenance

California Department of Transportation

POSTED

CLOSED

Environmental Sensor Supply (Flow, Conductivity, Turbidity, Temperature)

Fish and Wildlife, Region 3 - Bay Delta, Fairfield

POSTED

DEADLINE

Dual Binnacle Control System Supply

Parks and Wildlife Department

POSTED

CLOSED

Supply of WIM Sensors and Inductive Loops

Long Beach, Port of

POSTED

DEADLINE

25 Gigabit Ethernet (25GE) Test Module Supply

Texas A&M University

POSTED

CLOSED

100 Gigabit Ethernet (100GE) Test Module Supply

Texas A&M University

POSTED

CLOSED

40 Gigabit Ethernet (40GE) Test Module Supply

Texas A&M University

POSTED

CLOSED

Hydrographic Survey Sensor Integration (Sonar & GNSS)

Maryland Department of General Services

POSTED

CLOSED

HUB-Eligible Subcontracting and Supplier Participation

Glouchester County

POSTED

CLOSED

Avionics and Mission Systems Integration

Glouchester County

POSTED

CLOSED

MODULE, DETECTION - REF 2095817

Solicitation # 2095817

Dallas Area Rapid Transit

POSTED

CLOSED

RedZone Robotics — Muli-sensor pipeline inspection

Solicitation # 111125

POSTED

DEADLINE

in over 3 years

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS