Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC System Replacement and Installation

Active

Federal

Response Deadline01/30/2027, 06:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract outlines the complete removal and disposal of the existing HVAC and control system at location TAN-677, followed by the installation of a new Air Handling Unit (AHU). The new system will be integrated with the existing ductwork and electrical systems, ensuring compatibility and functionality within the current infrastructure. The contract is categorized under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. Issued by Battelle Energy Alliance on behalf of the Department of Energy, this subcontract has a response deadline of January 30, 2027, and is intended for a replacement and installation project at the site designated by the zip code 83415. Although specific details about the solicitation number and point of contact are not provided, the contract remains accessible through the SAM.gov workspace link given, allowing interested parties to obtain further information and submit their proposals before the deadline.

General Info

Removal and installation of HVAC system at TAN-677, integrating new AHU with existing infrastructure.

Agency

Department Of Energy → Battelle Energy Alliance–doe CntrView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

ID, 83415, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMar 24

subcontract

Response DeadlineJan 30

Submission deadline

Response Deadline

01/30/2027, 06:59:00 AM UTCin 6 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Battelle Energy Alliance–doe Cntr

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Battelle Energy Alliance–doe Cntr

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete removal and disposal of the existing HVAC and control system at TAN-677, and installation of a new Air Handling Unit (AHU) with integration into existing ductwork and electrical systems.

Similar Contracts

Same NAICS industry code

PROVIDE FIRE EQUIPMENT INSPECTION SERVICES FOR THE ROCKY MOUNTAIN REGION LOCATED IN LOVELAND COLORADOThe Western Area Power Administration, under the Department of Energy, is forecasting a contract to provide fire equipment inspection services across the Rocky Mountain region centered in Loveland, Colorado. The procurement is designated for small businesses under the SBA set-aside program, with the NAICS code 238220 indicating classification within specialty trade contractors, specifically related to fire protection system installation and maintenance services. The contract will require periodic inspections, maintenance assessments, and compliance verification of fire safety equipment located at various facilities within the region, ensuring adherence to federal and local safety standards. Two Small Business Program Managers, reachable via tetrault@wapa.gov and setzel@wapa.gov, serve as the primary points of contact for inquiries and participation guidance. The solicitation is currently listed as a forecast with no published solicitation number, and the anticipated posting date is in 2026, suggesting this is a planning notice for future procurement activity.

Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

WATER BASED FIRE SPRINKLER SYSTEMS (JPL, Goldstone, and Table Mountain)The contract is for water-based fire sprinkler systems at NASA’s Jet Propulsion Laboratory locations in Pasadena, Goldstone, and Table Mountain, with a primary place of performance in Pasadena, California. It is targeted toward small businesses under an SBA set-aside classification and falls under NAICS code 238220 for fire protection system contractors. The initial period of performance extends through December 31, 2025, with options available to extend the contract through December 31, 2031, allowing for continued service and potential expansion of scope. The contract was posted as a forecast on August 10, 2026, indicating future solicitation intent, and no solicitation number has been assigned yet. All work will be performed to meet fire safety standards for critical NASA facilities, and the contracting activity is managed by the Jet Propulsion Laboratory under the National Aeronautics and Space Administration.

NASA Jet Propulsion Laboratory

POSTED

about 2 hours ago

DEADLINE

Lab wide plumbing servicesThe contract is for comprehensive lab-wide plumbing services under a small business set-aside, awarded by the NASA Jet Propulsion Laboratory, part of the National Aeronautics and Space Administration. The primary place of performance is located in Pasadena, California, with a ZIP code of 91109, and the North American Industry Classification System code 238220 identifies it as plumbing, heating, and air-conditioning contracting. The initial period of performance extends through October 31, 2025, and includes options that can extend the contract through October 31, 2027, allowing for potential continuation based on performance and funding. The contract was posted as a forecast on August 10, 2026, and is targeted exclusively at small businesses, reflecting NASA JPL’s commitment to supporting small business participation in federal contracting. There is no solicitation number provided, and no point of contact details are listed in the data, with additional information available through the agency’s online acquisition portal.

NASA Jet Propulsion Laboratory

POSTED

about 2 hours ago

DEADLINE

X028 B-593 Replace Electrical TransformerThe contract titled X028 B-593 Replace Electrical Transformer is a forecasted procurement by Naval Information Warfare Systems under Niwc Pacific, aimed at replacing an electrical transformer at a location in San Diego. The NAICS code 238220 indicates this effort falls under electrical contracting services, signaling that the work will involve specialized electrical infrastructure replacement rather than general construction. Although the solicitation number is not yet provided and the type of set aside is unspecified, the anticipated procurement is positioned for future competitive bidding with no indication of restricted participation at this stage. Point of contact for the solicitation is Johannes Cardenas, Contracting Officer, reachable via email, with Crystal Irvin serving as the secondary point of contact. Both are affiliated with the U.S. Navy and will manage communications and procedural guidance as the opportunity progresses toward formal solicitation. The associated portal link provides a reference for interested vendors to monitor further updates, though no deadline or issuance date for the actual request for proposal is yet available. The agency is preparing to engage qualified contractors for this critical infrastructure upgrade to maintain operational readiness at the San Diego facility.

POSTED

about 2 hours ago

DEADLINE

Desludge pond and replace reservoirThe Federal Prison System under the Department of Justice is forecasting a contract to desludge a pond and replace a reservoir at a facility in Lompoc, California. The work is classified under NAICS code 238220, indicating it involves specialty trade contractors, likely related to site preparation, excavation, or plumbing and wastewater infrastructure. This action is part of a broader effort to maintain or upgrade critical water and waste management systems at the federal prison site. All work will be performed on-site in Lompoc, and the contract opportunity is currently in the forecast phase, meaning it is not yet solicited but anticipated in the near future. Point of contact for inquiries is Krista Sua, reachable via email at kxsua@bop.gov, while David Orrantia serves as the Small Business Specialist at dorrantia@bop.gov, providing support for potential small business participants. No solicitation number has been assigned yet, and there is no information regarding set-aside status or funding details. The posting date indicates this forecast was published in August 2026, suggesting it is part of an upcoming planning cycle for infrastructure maintenance within federal correctional facilities. Contractors interested in this opportunity should monitor official channels for future solicitations.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

Boiler InspectionThe contract opportunity involves boiler inspection services for the Federal Prison System under the Department of Justice, with performance expected in Washington, District of Columbia. This forecasted procurement is designated as a Small Business Total Set-aside, encouraging participation exclusively from small businesses. The relevant NAICS code for this contract is 238220, which relates to plumbing, heating, and air-conditioning contractors. The solicitation does not yet have a number or a finalized posting date beyond May 25, 2026. Key contacts include Heidi Bourne, serving as the primary point of contact, and a designated Small Business Program representative to assist with small business engagement. Interested parties can find additional information and follow updates via the Department of Justice's contracting opportunities webpage.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

Replace Cooling TowersThe Department of Justice’s Federal Prison System, Bureau of Prisons, is forecasting a contract opportunity for the replacement of cooling towers. This project is categorized under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. While specific location details for the place of performance are not provided, the contract aims to upgrade or replace existing cooling tower infrastructure within federal prison facilities. Interested parties or potential bidders can direct inquiries to Jared Hess, the primary point of contact, or reach out to the Small Business Program office at the Bureau of Prisons for assistance, particularly concerning small business participation. Further details and updates on this contracting opportunity can be accessed through the Department of Justice’s official contracting forecast webpage. The notice was posted on May 25, 2026, indicating an upcoming solicitation in this area.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

BF Group Climate ControlThe BF Group Climate Control contract is a forecasted 8(a) sole source opportunity under NAICS code 238220, designated for small businesses participating in the Small Business Administration’s 8(a) Business Development Program. This procurement is being managed by the Federal Prison System within the Department of Justice, specifically for climate control services to be performed in Jesup, Georgia. The contract is intentionally structured as a sole source award reserved exclusively for an 8(a)-certified business, ensuring that eligible small disadvantaged businesses have the opportunity to compete without open competition. The point of contact for procurement inquiries is Krista Sua, reachable via email at kxsua@bop.gov, while David Orrantia serves as the Small Business Specialist to support participation from small business vendors. The opportunity was posted on August 10, 2026, and additional details can be accessed through the official DOJ forecast portal.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

BF Replace Water Softener and Hot Water HeatersThe Federal Prison System/Bureau of Prisons is forecasting a sole-source procurement under the 8(a) program for the replacement of water softeners and hot water heaters at a facility in Mendota, California. This procurement is designated for 8(a) small businesses, meaning only eligible socially and economically disadvantaged small businesses can respond, and it is being issued as a sole source, indicating no competitive bidding is planned. The North American Industry Classification System code 238220 identifies the work as related to plumbing, heating, and air-conditioning contracting. The point of contact for procurement inquiries is Krista Sua, with David Orrantia serving as the Small Business Specialist, both reachable through official Department of Justice email addresses. The opportunity was posted on August 10, 2026, and while no solicitation number has been assigned yet, further details and submission instructions will be accessible via the provided SAM.gov link. Performance is expected to occur exclusively at the Mendota, California location.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

BF Install Institution Water SoftenerThe Federal Prison System / Bureau of Prisons, under the Department of Justice, has forecasted a sole-source procurement opportunity under the 8(a) program for the installation of a water softener at an institution in Phoenix, Arizona. The contract is designated for small businesses participating in the 8(a) Business Development Program, indicating it is reserved exclusively for eligible socioeconomically disadvantaged businesses. The North American Industry Classification System code 238220 identifies this as a plumbing, heating, and air-conditioning contract, underscoring the specialized nature of the work required. The opportunity is not currently open for bidding but is posted as a forecast to provide visibility into upcoming procurement activity, allowing interested vendors to prepare in advance. Point of contact for the contract is Krista Sua, reachable at kxsua@bop.gov, with David Orrantia serving as the Small Business Specialist at dorrantia@bop.gov to assist small business inquiries. The place of performance is specifically located in Phoenix, Arizona, and no other geographic scope has been indicated. As a forecast, this contract does not yet have a solicitation number or established deadlines, but entities interested in pursuing the opportunity should monitor future official announcements and engage with the designated contacts to ensure alignment with upcoming requirements. The procurement is part of the Bureau of Prisons’ ongoing efforts to maintain facility infrastructure and ensure water quality standards are met at its institutional locations.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

Replace Water HeatersThe Federal Prison System within the Bureau of Prisons is forecasting a contract opportunity to replace water heaters at facilities in Coleman, Florida, under the NAICS code 238220 for plumbing contractors. The solicitation is posted as a forecast on August 10, 2026, with no set-aside designation indicated, meaning it is open to all eligible bidders without specific small business reservations. The work will involve the removal and installation of new water heating systems at federal prison locations in the designated area, requiring qualified contractors with experience in commercial plumbing and system upgrades. Point of contact for technical inquiries is Kelly Kuykendall at k2young@bop.gov, while David Orrantia serves as the Small Business Specialist for guidance regarding subcontracting and small business participation. The opportunity is listed on the Department of Justice’s contracting forecast page and does not include a solicitation number yet, as this is a planning notice intended to provide advance visibility into upcoming procurement activity.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

Replace BoilersThe Federal Prison System under the Bureau of Prisons is forecasting a contract to replace boilers, with the NAICS code 238220 representing building equipment contractors, and the procurement classified as an 8(a) Sole Source opportunity, meaning it is reserved exclusively for small businesses participating in the SBA’s 8(a) Business Development program. The contract has been posted as a forecast on August 10, 2026, with the place of performance listed as nationwide, indicating that work may occur at various federal prison facilities across the country. The procurement is being managed by the Department of Justice, and solicitations for this opportunity are expected to follow the forecast announcement. Patrick Ford serves as the primary point of contact for the procurement, reachable at pford@bop.gov, while David Orrantia is designated as the Small Business Specialist and can be reached at dorrantia@bop.gov to provide guidance to potential 8(a) participants. No specific solicitation number has been assigned yet, and there is no provided office address or zip code, but the nationwide scope suggests coordination across multiple sites. Interested small businesses must qualify under the 8(a) program to be eligible, and all activities will be subject to federal contracting regulations governing sole source awards. The official forecast page provides further details via the provided UI link.

Federal Prison System / Bureau Of Prisons

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Energy → Battelle Energy Alliance–doe Cntr

Same awarding agency

Available for Licensing: Continuous Electric-Field Assisted Sintering Technology for Scalable Continuous Material Production

Solicitation # BA-1488_2

A continuous electric-field assisted sintering (CEFAS) technology has been developed to overcome the limitations of traditional batch-based electric-field assisted sintering systems, which are constrained by fixed-die dimensions and single-sample throughput. This innovation replaces the enclosed die with a roller-based configuration that applies electrical current, uniaxial force, and shear stress continuously as material moves through the system, enabling sintering at temperatures exceeding 2000 degrees Celsius without length restrictions. By eliminating the geometric and volume constraints imposed by conventional dies, the system allows for the production of extended or high-volume components previously unattainable in batch setups, significantly increasing potential production rates and opening new design possibilities for part geometries. The technology is targeted at manufacturers across industries that rely on sintering to consolidate powdered materials, particularly those facing scalability challenges due to low throughput or dimensional limitations of existing equipment. Unlike current systems that can produce at most five samples per cycle, CEFAS is designed for uninterrupted operation, making it suitable for industrial-scale deployment and applications demanding consistent, high-volume output. The innovation is not being procured but is available for licensing, co-development, or evaluation by industry partners interested in advancing commercial applications. Interested parties must respond by September 1, 2026, and should engage through Battelle Energy Alliance–DOE Center in Idaho Falls, Idaho, to explore partnership opportunities under the special notice BA-1488_2.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Available for Licensing: Behind-the-Meter Energy Management Technology for Peak Shaving and Load Shaping

Solicitation # BA-946

A control algorithm is available for licensing that manages behind-the-meter energy storage and onsite generation to optimize peak shaving and load shaping across electrical power systems. Designed to reduce energy costs and demand charges for facility operators while alleviating strain on utility infrastructure, the system coordinates batteries and local generation to deploy stored energy at optimal times. It is engineered for broad scalability, functioning seamlessly across residential, commercial, industrial, nanogrid, microgrid, and distribution-level applications, from 120 V to 66 kV systems. The algorithm operates in two stages—proactive hour-ahead scheduling using weather and load forecasts, followed by real-time adjustments based on actual conditions—and adapts battery usage based on energy security needs, reserving charge when only a single fuel source is available. It responds to utility demand-response signals, time-based pricing, and grid constraints, and is capable of operating in both grid-connected and islanded modes, making it suitable for critical facilities requiring uninterrupted power. This technology is not intended for procurement but for partnership through licensing, co-development, or evaluation by industry stakeholders such as power-system software developers, energy technology firms, and electric utilities. It addresses a key industry challenge by replacing fragmented, facility-specific solutions with a unified, adaptable framework that eliminates the need for redesign across deployment contexts. Applications include reducing operational expenses for facility owners, supporting grid congestion management, enhancing energy security for hospitals and defense sites, and enabling participation in electricity balancing markets. The technology is managed by Battelle Energy Alliance under the U.S. Department of Energy, with licensing inquiries directed to Javier Martinez at the Idaho Falls office. Interested parties must respond by August 30, 2026, to explore commercialization pathways under solicitation number BA-946.

Other Electric Power Generation

POSTED

DEADLINE

Technology Licensing Opportunity: Flame-Retardant Electrolytes for Safer Lithium-Ion Batteries

Solicitation # BA-846

A novel class of air- and water-stable ionic liquids based on N-organophosphoranimines has been developed as flame-retardant electrolytes for lithium-ion batteries, overcoming the flammability and thermal instability of conventional carbonate-based electrolytes. These compounds, synthesized via a Staudinger reaction using a stable imidazolium azide precursor, feature unique structural motifs with imidazolium groups bound directly to nitrogen—a first in the field—enabling unprecedented thermal stability beyond 150°C, low viscosity, and compatibility with lithium salt solubilization. Unlike prior phosphoranimines that were reactive intermediates unsuitable for commercial use, this technology offers practical handling, storage, and integration into existing battery architectures, with tunable properties such as solubility and viscosity across two key variants to suit diverse application needs. The solution directly addresses critical safety and performance gaps in lithium-ion batteries, particularly for high-risk environments including aerospace, defense, grid storage, and industrial operations where thermal runaway and fire hazards are major concerns. Its inherent non-flammability, chemical robustness, and electrochemical stability make it ideal for extreme conditions, while the novel chemistry provides strong intellectual property differentiation. Market potential extends beyond energy storage to industrial solvents and lubricants requiring low volatility and flame resistance. The technology is available for exclusive or non-exclusive licensing through the Department of Energy’s Battelle Energy Alliance, with responses due by September 30, 2026, and inquiries directed to Javier Martinez at the Idaho Falls facility. Licensing is the sole focus—no procurement or development services are offered.

Other Basic Inorganic Chemical Manufacturing

POSTED

about 2 months ago

DEADLINE

in about 2 months

Anisotropic Additive Manufacturing Optimization Technology for Greater 3D Printing Efficiency

Solicitation # BA-1199

This contract pertains to a licensable technology aimed at optimizing 3D printing processes by adjusting parameters such as infill density, geometry, layer thickness, and material distribution to improve the anisotropic properties of printed parts. The innovation centers on developing a comprehensive material property database for single and dual material 3D printed components. This allows for precise prediction of how parts will perform under real-world conditions, thus eliminating the need for costly and time-consuming experimental testing. The technology offers significant cost savings in materials and printing expenses, enhances design reliability, and opens new possibilities for applying 3D printing across industries. The technology addresses critical challenges in the current 3D printing landscape, including the prevalent assumption of isotropic material properties in part design and the lack of dependable data for predicting real-world behavior. It is geared towards industrial applications in aerospace, military, engineering, architecture, construction, and medical fields, supporting the development of high-performance and cost-effective printed parts. Additionally, it supports the creation of advanced software and simulation tools for predictive modeling and offers consultancy services to optimize manufacturing processes. The Department of Energy’s Battelle Energy Alliance–doe Center seeks partners interested in licensing and commercializing this innovation, emphasizing technology deployment without engaging in purchasing or external service procurement.

POSTED

DEADLINE

in about 1 month

RELAP5-3D 4.x: Thermal-Hydraulic Nuclear Reactor Analysis, Licensing Opportunity

Solicitation # CW-25-06

RELAP5-3D is an advanced thermal-hydraulic simulation software designed for comprehensive analysis of nuclear power plants and complex thermal-fluid systems. Originally created for light water reactor safety, it supports detailed multiphase flow, heat transfer, reactor kinetics, and fluid-structure interaction modeling across one-, two-, and three-dimensional geometries. This versatility allows it to perform steady-state and transient analyses for a wide range of reactor designs, including small modular reactors, high-temperature gas-cooled reactors, and liquid metal-cooled reactors. The software addresses the need for high-fidelity, validated simulation tools capable of capturing complex physical phenomena and multi-physics interactions that commercial codes often cannot fully represent. The contract offers a licensing opportunity through the Department of Energy’s Battelle Energy Alliance for interested companies to commercialize RELAP5-3D technology. Key features of the software include support for single- and two-phase flow with multiple fluids, built-in neutron kinetics models, coupled heat structure and control system simulations, parallel processing, and optional integration with external modeling tools for fuel performance and computational fluid dynamics. RELAP5-3D is widely used in reactor design, safety analysis, plant performance evaluation, R&D, and multi-domain system simulations. The Department of Energy seeks partnerships strictly for intellectual property licensing and commercialization, with a deadline for responses by November 1, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

TAN 675 Lighting Controls Upgrade

Solicitation # INL-26-036

Battelle Energy Alliance, LLC, the managing contractor for the U.S. Department of Energy’s Idaho National Laboratory, is seeking qualified vendors to express interest in providing lighting controls upgrade services for the TAN-675 facility. The project aims to improve energy efficiency, operational reliability, and ensure compliance with DOE, NFPA, and relevant energy standards through the removal of outdated lighting and control systems, installation of new hardware and software, integration with existing infrastructure, and thorough testing and commissioning. The contract falls under the Davis-Bacon Act regulations and the INL Site Stabilization Agreement for construction work exceeding $2,000, with specific site areas governed by these agreements. Interested vendors are requested to submit a detailed Expression of Interest by January 29, 2027, including their company information, relevant experience with lighting control upgrades, applicable NAICS codes, business size classification, and any prior DOE or federal contracting experience. Responses will be reviewed to develop a shortlist for an upcoming formal Request for Proposal process. Vendors must clearly identify any proprietary or business-sensitive information in their submissions. The point of contact for the solicitation is Chase Egbert, and the work will be performed in Idaho Falls, Idaho, under solicitation number INL-26-036.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

TAN AHU Replacement

Solicitation # INL-026-035

Battelle Energy Alliance, LLC, the management and operating contractor for the U.S. Department of Energy’s Idaho National Laboratory (INL), is soliciting Expressions of Interest (EOI) from qualified vendors to replace an aging Air Handling Unit (AHU) at the TAN-677 facility. This replacement project aims to enhance the reliability, energy efficiency, and operational safety of the facility’s HVAC systems. The work scope includes removal and proper disposal of the existing HVAC and control systems, installing a new AHU and associated components, integrating them with existing ductwork, electrical, and control infrastructure, and performing thorough testing and commissioning to ensure performance compliance. Vendors are required to demonstrate expertise in such replacements, provide company and contact details, identify relevant NAICS codes and business size classification, and indicate any DOE or federal contract experience. The EOI responses will help BEA identify qualified vendors for potential inclusion in a forthcoming Request for Proposal (RFP). The project is governed by various regulatory and site-specific standards, including DOE requirements, ASHRAE guidelines for HVAC systems, and applicable safety standards. The Davis-Bacon Act applies due to the construction nature of the work, mandating prevailing wage adherence for labor exceeding $2,000 and compliance with the INL Site Stabilization Agreement for on-site work within the laboratory boundaries. Submittals containing proprietary information must be clearly marked to protect sensitive data. Inspection and acceptance of deliverables occur on-site at TAN-677, with DOE oversight ensuring all performance and safety criteria are met. The current stage is preliminary market research via sources-sought solicitation (No. INL-026-035), with an EOI deadline of January 29, 2027. Detailed contractual terms, evaluation criteria, pricing data, and delivery schedules will be established in subsequent contract phases. No packaging, marking, or formal FAR clauses are specified at this time. The point of contact for submissions and inquiries is Chase Egbert at the Idaho Falls office.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

New HVAC System and Equipment SupplyThis contract involves the supply of a new Air Handling Unit along with all related HVAC components, including fans, coils, filters, and dampers, designed to meet project specifications and Department of Energy efficiency standards. The procurement is set by Battelle Energy Alliance for the Department of Energy and is classified under the NAICS code 423730, which covers electrical and electronic appliance, wiring supplies, and related equipment merchant wholesalers. The subcontract opportunity was posted on March 24, 2026, with a response deadline of January 30, 2027. The work is to be performed in a location identified by the zip code 83415, although specific city and state details are not provided. This contract requires adherence to DOE efficiency requirements, emphasizing energy performance and compliance with relevant standards. No set-aside type or organization type has been specified, and no further details about the point of contact or solicitation number are available.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ductwork Modification and Integration ServicesThe contract involves the modification, repair, or fabrication of ductwork to connect a new Air Handling Unit (AHU) to existing infrastructure. This includes tasks such as sealing, resizing, and rerouting ductwork to ensure optimal airflow. The purpose is to integrate the new AHU effectively with the current system, enhancing ventilation performance. Issued by the Department of Energy through Battelle Energy Alliance, the subcontract falls under the NAICS code 238220, which covers plumbing, heating, and air-conditioning contractors. The work is to be performed at a location with the zip code 83415, and the solicitation was posted on March 24, 2026. Responses are due by January 30, 2027, indicating a lengthy period allocated for contractor proposals. No specific set-aside type or point of contact information is provided in the contract data.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC System Testing, Commissioning, and VerificationThe contract involves comprehensive testing, balancing, and commissioning of a new HVAC system to ensure it meets performance requirements, control calibration standards, and complies with both design specifications and regulatory mandates. This subcontract is aimed at verifying the system’s operational efficiency and adherence to established guidelines, which is critical for maintaining optimal environmental conditions and energy management. Issued by Battelle Energy Alliance on behalf of the Department of Energy, the contract is identified under the NAICS code 541330, relating to engineering services. The opportunity was posted on March 24, 2026, with a response deadline set for January 30, 2027. The place of performance is within the 83415 zip code area, although specific city and state details are not provided. The contract represents a key effort in upgrading and validating HVAC infrastructure under federal oversight.

Engineering Services

POSTED

DEADLINE

HVAC Controls and Electrical IntegrationThe contract involves integrating the control systems for new air handling units (AHUs) with the existing electrical infrastructure and building management systems. This includes tasks such as wiring, installing control panels, and verifying communication between systems to ensure seamless operation. The scope focuses on updating HVAC controls to enhance system efficiency and compatibility. Issued by the Department of Energy through Battelle Energy Alliance, this subcontract opportunity falls under NAICS code 238210, which relates to electrical contractors and other wiring installation. The work location is within the 83415 zip code area, with a response deadline of January 30, 2027. The contract emphasizes technical integration within energy facility operations, requiring specialized electrical and control system expertise.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

System Testing, Commissioning & CertificationThe contract involves performing comprehensive testing and certification of an upgraded lighting control system to verify its functionality, integration, performance, and compliance with established design, safety, energy efficiency, and operational standards. The scope includes functional testing, integration verification, performance benchmarking, and the final certification process to ensure the system meets all necessary requirements. This subcontract, titled "System Testing, Commissioning & Certification," is associated with the Department of Energy through Battelle Energy Alliance and is based in Idaho Falls, with a response deadline set for January 30, 2027. The contract falls under the NAICS code 541380, indicating a focus on testing laboratories. The work aims to ensure that the lighting control system upgrade adheres to stringent quality and regulatory criteria before final acceptance.

Testing Laboratories and Services

POSTED

DEADLINE