Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hydraulic Collet Specimen Grips Supply & Installation

Active

Federal

Response Deadline09/04/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

MS

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC26943485.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HYDRAULIC COLLET SPECIMENT GRIPS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 01:00:00 PM UTCin about 21 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs one set of hydraulic collet specimen grips for prime contractors on NASA Glenn Research Center projects. Provides upper and lower grips with collets for 30mm, 25mm, and 12mm specimens and an attachment kit for an Instron Model 8521C6712 axial torsion frame. Equipment must support +/- 100 KN for tension and compression testing. Delivers a fully installed, operational grip set with a one-year warranty.

Similar Contracts

Same NAICS industry code

Agriculture and Irrigation - Request for Quotes - Centrifuge

Solicitation # AB-2026-06101

The Agriculture and Irrigation agency is seeking quotes for the procurement of one centrifuge to be used by the Food Safety Branch. This solicitation, identified by number AB-2026-06101, was posted on September 2, 2026, with a response deadline set for September 16, 2026. The equipment will be utilized within the province of Alberta. Interested parties should refer to the official request for quotes document for the full list of required technical specifications and direct all inquiries to the Agriculture and Irrigation Purchasing office in Edmonton.

Agriculture and Irrigation

POSTED

about 20 hours ago

DEADLINE

CAMERA, INFRARED, IND

Solicitation # SPEA46-26-T-21PL

This contract is a solicitation for industrial infrared cameras, identified as commercial off the shelf critical application items from Seek Thermal Inc. The procurement consists of two line items totaling 12 units under NSN 6635017375672, with delivery required within 20 days. Shipments are destined for the USCG Training Center in Cape May, New Jersey, and the SWSC ENG LRN site in San Diego, California, using traceable means. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. It explicitly prohibits the use of mercury or mercury compounds in the hardware, preservation, and packaging. Additionally, the contract requires compliance with Cybersecurity Maturity Model Certification Level 2 and specific DLA technical and quality requirements. The items have no shelf life requirement and have been determined to be non-hazardous.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

GAGE, FUEL ADAPTER

Solicitation # SPE85-26-T-4173

Solicitation SPE8E5-26-T-4173 is a request for quotes from DLA Troop Support for the procurement of eight fuel adapter gages, identified by NSN 5220013019247 and part number 1876AS100-1. The requirement is for a quantity of 8 each, with a need ship date of March 1, 2027, and an original required delivery date of June 7, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Jacksonville in Florida. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging following ASTM D3951 and marking according to MIL-STD-129. Key compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information, and strict prohibitions on the intentional addition of mercury. Suppliers must also comply with the Hazard Communication Standard for any hazardous materials provided. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system.

JACKSONVILLE BLDG

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE85-26-T-4135

Solicitation SPE8E5-26-T-4135 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 46 units of a critical application item, specifically a Type I straight bar measuring 1/4 x 5/8 x 6 inches with a 55-60 Rockwell hardness rating, identified by NSN 5220-00-274-7372. The items must conform to GGG-P-61B Revision B and TDP Rev A Gen 1. Delivery is required within 167 days, with an original required delivery date of February 2, 2027, and a need ship date of March 1, 2027. Shipping is FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and safety standards, including origin inspection and sampling according to MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. A critical restriction is placed on the use of additive manufacturing, as such offers are ineligible for award. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. A price evaluation preference is available for certified HUBZone small business concerns.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

GAGE, CONTACT, ELECTRICA

Solicitation # SPE8E5-26-T-4176

Solicitation SPE8E5-26-T-4176 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of six electrical connector contact gages. The required items are identified by NSN 5220013345965 and part number A-034B from Maury Microwave, Inc. This procurement is designated as a critical application item and is set aside for small businesses under NAICS code 334516. Delivery is required within 167 days after receipt of order, with the destination for shipment and acceptance located at DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling. Palletization must comply with RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and various FAR clauses regarding trafficking in persons and employment eligibility. Quotes must be submitted electronically through the DIBBS portal.

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4130

Solicitation SPE8E5-26-T-4130 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 36 units of solid straight bars measuring 3/8 x 3/4 x 6 inches, identified by NSN 5220002747373. This item is designated as a critical application item and requires source inspection. The procurement is a small business set-aside and includes a price evaluation preference for certified HUBZone small business concerns. Technical requirements are governed by GGG-P-61B and TDP Rev A Gen 1, with specific restrictions against the intentional addition of mercury in accordance with NAVSEA 5100-003D. Delivery is required 167 days after order, with an original required delivery date of January 10, 2027, and a need ship date of March 1, 2027. Shipping is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Quality assurance involves destination inspection and sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4179

This solicitation, identified as SPE8E5-26-T-4179, is issued by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility for the procurement of 30 units of a profile gage, identified by NSN 5220-01-348-1638 and Bosch Automotive Service Solutions part number J25502. The contract specifies a delivery timeframe of 167 days after order, with an original required delivery date of February 2, 2027, and a need ship date of March 1, 2027. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements for procurement and adherence to ASTM D3951 and MIL-STD-129 for marking and labeling. It also incorporates specific quality mandates such as the removal of government identification from non-accepted supplies and the potential application of covered defense information. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026, and falls under NAICS code 334516.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

GAGE, INSPECTION

Solicitation # SPE8E5-26-T-4151

Solicitation SPE8E5-26-T-4151, issued by DLA Troop Support Construction and Equipment, is a request for quotations for the procurement of 17 inspection gages under NSN 5220011553843. The requirement is managed under NAICS code 334516, with quotations due by September 14, 2026, via the DIBBS portal. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of February 28, 2027, and a need ship date of March 1, 2027. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking and labeling per MIL-STD-129. Palletization must follow RP001 requirements, and the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Payment processing is required through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on the use of additive manufacturing unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4154

Solicitation SPE8E5-26-T-4154 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 77 units of a parallel, identified by NSN 5220-00-274-7374. The item is specified as Type I, size 1/2 x 5/8 x 6 inches. This procurement is conducted under the First Destination Transportation program to reduce costs through Government-Arranged Transportation. Delivery is required within 167 days after the order, with destination inspection required per FAR 52.246-1. The contract mandates strict adherence to DLA packaging requirements (RP001), marking standards (MIL-STD-129), and environmental restrictions, specifically prohibiting the intentional addition of mercury or mercury-containing compounds except for specified functional exceptions. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Administrative requirements include electronic submission of quotes via DIBBS and the use of the Wide Area WorkFlow system for invoicing and receiving reports. The solicitation also incorporates various DFARS and FAR clauses regarding cybersecurity, safeguarding covered defense information, and a price evaluation preference for certified HUBZone small business concerns.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E5-26-T-4190

Contract SPE8E5-26-T-4190 is a solicitation issued by the Department of Defense for the procurement of 32 pullover gages, identified by NSN 5220012599100 and part number 7247965. The contract specifies delivery within 287 days and requires inspection and acceptance at the origin. A critical requirement of this procurement is First Article Testing (FAT), which requires the contractor to provide notice 30 days prior to testing and submit the first article report within 90 days to the designated points of contact at CCDC-ACE. The technical specifications include a requirement for heavy phosphate finish per MIL-DTL-16232 and strict adherence to specific engineering exceptions regarding cleaning, drying, and packaging. Packaging must follow a detailed six-step process involving specific preservatives, wraps, and containers to ensure a tight pack, with a prohibition on the intentional addition of mercury. All hazardous materials must comply with the Hazard Communication Standard, requiring the submission of Safety Data Sheets and compliant labeling. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-326J

This contract, identified by solicitation number SPE7M1-26-T-326J, is issued by the Department of Defense Maritime Supply Chain for the procurement of two gas detectors under NSN 6665-01-609-1302. The items are classified as critical application items and must adhere to technical data package Revision A Generation 1 and basic drawing 16236 RE-016091302. The procurement is governed by NAICS code 334516 and requires delivery within 20 days after receipt of the order, with a required delivery date of July 13, 2026. The contract specifies strict quality and safety requirements, including a non-extendable shelf life of 12 months and compliance with hazardous materials packaging and shipping standards. Mercury is prohibited unless used for functional purposes in batteries or sensors, in which case it must be shock-proof and double-contained. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific adherence to DLA packaging requirements. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically Maxwell AFB in Alabama.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Purchase of a Handheld Raman - Narcotics Identification Analyzer

Solicitation # 19AL6026Q0016

The US Embassy Tirana, under the Department of State, is soliciting bids for the purchase of a Handheld Raman Narcotics Identification Analyzer. This combined contract opportunity, identified by solicitation number 19AL6026Q0016 and NAICS code 334516, requires the equipment to be utilized in Tirana, Albania. Interested parties must submit their responses by the deadline of September 16, 2026, at 2:30 PM. Primary coordination for this procurement is managed by Chris Carlisle and Saimira Haxhi via the embassy's dedicated bidding email address.

US Embassy Tirana

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Tescan MAIA3 Scanning Electron Microscope (SEM) Maintenance

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 20 hours

Authorized Reseller for Globus Software

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Globus High Assurance Software Subscription

Software Publishers

POSTED

DEADLINE

MOOG ENGINEERING MODEL UNIT CASCADE SDU WITH ENCLOSURE

Solicitation # 80NSSC26942587

The NASA Shared Services Center is seeking to procure specialized spacecraft payload-processing development and integration hardware for the NASA Armstrong Flight Research Center in Edwards, California. The requirement consists of one Moog Engineering Model Unit Cascade SDU with Enclosure, one Moog Cascade 2-Slot Chassis, and one Moog Cascade 100 Pin Front Panel Breakout. This procurement is categorized under NAICS code 336413 and will be conducted as a commercial acquisition following FAR Part 12 procedures. NASA intends to award a sole source contract to Moog Inc. under FAR 12.102(a), as Moog Inc. is identified as the only provider of the specific integrated spacecraft-processing architecture compatible with existing NASA systems. The period of performance is established as six months after receipt of award. While the government is currently requesting capability statements by September 4, 2026, to determine if the procurement can be conducted on a competitive basis, it is noted that quotes submitted in response to the notice will not be evaluated by the technical team.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

athenaFlow and EZ Access patient portal Renewal

Solicitation # 80NSSC26942330Q

The NASA Shared Services Center is seeking a capability statement for the renewal of the athenaFlow and EZ Access patient portals. This special notice, identified by solicitation number 80NSSC26942330Q, is focused on services categorized under NAICS code 518210. The place of performance for these services is located in Houston, Texas. Interested companies must submit a capability statement to be considered, as quotes will not be reviewed or accepted at this time. The deadline for responses is September 7, 2026, at 6:00 PM. Primary inquiries and submissions should be directed to Cara Craft.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Moog Engineering Model Unit Cascade SDU & Debug Cable

Solicitation # 80NSSC26942609Q

The NASA Shared Services Center, on behalf of the Armstrong Flight Research Center, is seeking the procurement of specialized spacecraft-processing architecture and supporting hardware for payload-processing development and integration. The required equipment includes one Moog Engineering Model Unit Cascade SDU with Enclosure, one Moog Cascade Carrier Debug Cable, and one Moog Cascade 100 Pin Front Panel Breakout. This requirement is for specific integrated hardware rather than generic commercial components. The period of performance is six months after receipt of award, with the place of performance located in Edwards, California. The government intends to award a sole source contract to Moog Inc under FAR 12.102(a), as they have been identified as the sole provider of this equipment. The acquisition will follow FAR Part 12 procedures for commercial products and services and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman. While the intent is a sole source award, interested firms may submit capability statements and qualifications to the primary point of contact, Cara Craft, by September 7, 2026, to be considered for a competitive procurement. Quotes will not be accepted or reviewed; only capability statements are requested.

Motor and Generator Manufacturing

POSTED

DEADLINE

VACCO Industries pneumatic tee-type filter

Solicitation # 80NSSC940863Q

Solicitation 80NSSC940863Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for a brand-name VACCO Industries pneumatic tee-type filter, part number 24267-630-11 (79K80283-27). The component must be 316 SST with a 25 micron rating and meet specific cleaning standards per KSC-C-123 or ASTM G93, including a full disassembly and reassembly process with a 100A body and 50A element cleaning. These spare parts are required to support Artemis III systems and Exploration Ground Systems at the Kennedy Space Center Propellants and Life Support Services in Orlando, Florida. The contract will be awarded based on the lowest price technically acceptable (LPTA) criteria. To be considered for award, offerors must be registered in the System for Award Management and provide both proof of pricing from the manufacturer and official authorization from the original equipment manufacturer to resell the items. Deliveries are specified as FOB Destination and must include a certificate of conformance. Quotes are due by September 8, 2026, and must include estimated after receipt of order (ARO) timelines and manufacturer lead times.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

IADS Annual Maintenance and Support Renewal

Solicitation # 80NSSC26941993Q

The NASA Shared Services Center is seeking the IADS Annual Maintenance and Support Renewal for the NASA Armstrong Flight Research Center. This requirement consists of a Year 13 site license renewal and an associated annual economic increase of 4 percent. The period of performance is scheduled from November 1, 2026, to October 31, 2027, with the place of performance located at the Armstrong Flight Research Center in Edwards, California. The procurement is classified under NAICS code 513210 and is governed by the terms of the Site License IADS-NAFRC_SLA01 and the Maintenance and Support Services Addendum. Under the authority of FAR 12.102(a), the government intends to award a sole source contract to Curtiss-Wright DS, Inc., as they have been determined to be the sole provider of these services. While the agency has issued a notice of intent to sole source, interested organizations were invited to submit capabilities and qualifications by September 7, 2026, to determine if competitive procurement should be considered. The primary point of contact for this effort is Cara Craft.

Software Publishers

POSTED

DEADLINE

Purchase of 4 Minus K vibration isolation platforms

Solicitation # 80NSSC26941944Q

The National Aeronautics and Space Administration NASA Shared Services Center is soliciting quotes under solicitation 80NSSC26941944Q for the purchase of four Minus K vibration isolation platforms, part number 325CM1-CV. These platforms are required for the Ames Coronagraph Testbed to provide vibration isolation for an optomechanical bench supporting astrophysics experiments. Each unit must have a 325 lb load capacity, manual adjust capabilities, and specific vacuum modifications, including the removal of paint and anodizing, the use of electroless nickel steel parts, stainless hardware, Braycote grease, and vacuum dampening ISD 242NR02. The contract is a firm-fixed-price requirement with an estimated delivery lead time of 12 to 16 weeks from award, delivered FOB Destination to NASA Ames. This procurement is a brand-name requirement set aside for small businesses under NAICS code 334516. Award will be based on the lowest price technically acceptable (LPTA) criteria. Interested offerors must be registered in the System for Award Management (SAM), provide their CAGE code, and submit quotes in PDF form by September 9, 2026, at 1 p.m. CT to Cara Craft. Mandatory submission requirements include proof of pricing from the manufacturer and confirmation of reseller authorization. All packages for foreign supplies must be marked as United States Government and include the title of the contracting agency to qualify for duty-free entry.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

HIGH PERFORMANCE ENGINEERING WORKSTATIONS

Solicitation # 80NSSC26942594

The NASA Shared Services Center is seeking to procure three new, factory-built high-performance engineering workstations for the Distributed Electric Propulsion R&D project at the NASA Glenn Research Center. These systems are required to support computationally intensive nTop topology optimization and ANSYS Fluent analysis of additively manufactured lattice heat exchangers. Each workstation must be based on the Puget Workstation Core Ultra Z890 C121-L configuration, featuring an Intel Core Ultra 7 270K processor, 256 GB of DDR5 memory, and an NVIDIA RTX PRO 6000 Blackwell GPU with 96 GB. The procurement is classified under NAICS code 334111 and will follow FAR Part 12 procedures for commercial items. NASA intends to issue a sole source contract to Puget Systems, as they are identified as the only provider of workstations compatible with existing systems at NASA centers. The contractor must provide lifetime labor and technical support, a minimum three-year parts warranty, and ensure all systems undergo manufacturer burn-in and stress testing prior to shipment. Delivery is required within 30 calendar days after receipt of order to NASA Glenn Research Center, Building 6, Room 200 ws1. This is a schedule-critical procurement, and acceptance is contingent upon the systems being new, free of physical damage, and passing a basic functional power-on check.

Electronic Computer Manufacturing

POSTED

DEADLINE

HSF Funded- DATR: LRO Tracking Controller Repair (Spare)

Solicitation # 80NSSC26941692Q

NASA/NSSC intends to award a sole source contract to L3Harris Interstate Electronics Corporation for the repair of a spare LRO Tracking Controller. This procurement is being conducted under FAR Part 12 for commercial items and services, utilizing NAICS code 541330. The work will be performed at the NASA Armstrong Flight Research Center in California, with the NASA Shared Services Center serving as the procuring entity. Interested organizations may submit their capabilities and qualifications to the primary point of contact, Tracy Bremer, by 4:00 p.m. CST on September 7, 2026. These submissions will be used solely to determine if the procurement should be shifted to a competitive basis. Please note that formal quotes submitted in response to this notice will not be evaluated by the technical end user team.

Engineering Services

POSTED

DEADLINE

SCAPE VENTILATOR CYLINDERS

Solicitation # 80NSSC26941703Q-R1

Solicitation 80NSSC26941703Q-R1 is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of 170 carbon composite ventilator cylinders for use with Self-Contained Atmospheric Protective Ensemble operations at the Kennedy Space Center. This requirement is a total small business set-aside under NAICS code 334516. The procurement is necessary to replace existing inventory reaching DOT-mandated retirement thresholds in 2027. The government is seeking cylinders with part number 10128099-SP, featuring a 30-minute duration, 4500 psi working pressure, and a volume of 45 cubic feet, manufactured in accordance with DOT-SP 10915. Technical requirements specify that cylinders must be delivered empty and manufactured within six months of delivery to maximize service life. Compliance with CGA G-7.1 for preparation and CGA-4.1 or ASTM G-93 for cleaning is required, with a certificate of conformance for cleaning results submitted upon delivery. The award will be granted based on the lowest price technically acceptable offer. Quotes must be submitted to Cody Guidry by September 4, 2026, and must include the vendor's SAM CAGE code or UEI, shipping costs, lead time, and warranty or return policy. Delivery is FOB Destination to Orlando, Florida.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE