Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Inspector of Record (IOR) and Special Inspections

Active

State & Local

Response Deadline12/11/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with Capital Projects - Construction in California seeks a qualified firm to provide Inspector of Record and special inspection services for City projects. The selected contractor will be responsible for performing field testing and inspections to ensure all installations align with approved designs and DSA standards. Key duties include verifying field changes, utilizing electrical and structural measurement equipment, and producing the necessary DSA testing documentation to certify project completion. To be eligible, the contractor must maintain DSA-certified inspector status and be capable of delivering verified inspection reports and official project certification documents. Interested parties must submit their responses by the deadline of December 11, 2026. This procurement falls under NAICS code 541380 and is focused on ensuring rigorous quality control and regulatory compliance for prime contractors on municipal infrastructure projects.

General Info

DSA-certified firm needed for California city project inspections and certifications by December 2026.

Agency

California → Capital Projects - Construction

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-085-RFP.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Architectural and Engineering (A&E) Services for a Recreation Center Lighting Upgrade

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineDec 11

Submission deadline

Response Deadline

12/11/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Capital Projects - Construction

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Capital Projects - Construction

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs field testing and inspections for prime contractors on City projects to certify installations meet approved designs and DSA standards. Acts as the Inspector of Record (IOR), verifies field changes, and produces DSA testing documentation using electrical and structural measurement equipment. Requires DSA-certified inspector status. Delivers verified inspection reports and project certification documents.

Similar Contracts

Same NAICS industry code

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 4 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from California → Capital Projects - Construction

Same awarding agency

Corpyard Phase II Connex Structural Anchoring & Welding: (Rebid)

Solicitation # 26-091-ITB

The City of West Sacramento has issued solicitation 26-091-ITB for the Corpyard Phase II project, which requires the structural anchoring and welding of 14 existing shipping containers to a cement-treated asphalt surface. The scope of work includes container pre-checks, drilling and hole cleaning, the installation of Bolthold asphalt substrate, bolting down ASTMA36 plates using epoxied steel rods, and performing AWS welding to secure the plates to the container framing. To prevent corrosion, the contractor must apply a zinc-rich cold galvanizing rust-inhibiting coating. All work must be performed by a licensed contractor holding a current California C-51 or C-60 license and must adhere to PSE stamped drawings, structural calculations, and standards including ASCE 7-22, CBC 2022, and AISC 360-16. Final acceptance is contingent upon a successful inspection by the City's Building department. The estimated project value is 35,000 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bids must be submitted electronically via the OpenGov portal by November 10, 2026, at 1:00 pm, and must include a bid security of at least 10 percent of the total bid price. The successful bidder is required to provide performance and payment bonds equal to 100 percent of the contract price and must comply with California prevailing wage requirements and DIR registration. Additionally, the contractor must utilize the Virtual Project Manager system for submittals and maintain comprehensive insurance coverage, including Commercial General Liability and Workers Compensation. As a federal-aid construction project, the contract mandates strict adherence to FHWA-1273 provisions, including nondiscrimination and equal employment opportunity policies.

Structural Steel and Precast Concrete Contractors

POSTED

about 9 hours ago

DEADLINE

Structural Engineering Consultant (Limited Scope)This subcontract opportunity is for a Structural Engineering Consultant to provide limited scope services for prime contractors working on City facility projects. The selected consultant will perform structural analyses to determine if modifications to rated assemblies or lighting fixtures affect structural integrity, utilizing specialized software to generate calculations for DSA structural safety reviews. The consultant must hold a valid Professional Engineer license in the state of California to deliver the required stamped drawings and structural calculations for DSA submission. This procurement is managed by the Capital Projects Construction agency under NAICS code 541330, with a response deadline set for December 11, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

DSA Accessibility and Life Safety ConsultantThe DSA Accessibility and Life Safety Consultant subcontract, issued by the Capital Projects Construction agency in California, requires a specialized professional to provide review and documentation services for prime contractors on City projects. The primary objective is to ensure all work adheres to Division of the State Architect standards, specifically focusing on identifying path-of-travel upgrades under CBC Chapter 11B and managing application packages for structural, fire, and life safety requirements. Qualified candidates must hold a Certified Access Specialist certification or be a DSA-approved professional. The selected consultant will be responsible for delivering comprehensive access compliance reports and completed DSA application packages. Interested parties must submit their responses by the deadline of December 11, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

Electrical Engineering and Lighting Design ConsultantThe Electrical Engineering and Lighting Design Consultant subcontract involves providing specialized electrical design services for lighting upgrades at City recreation center projects. The selected consultant will work under prime contractors to conduct existing conditions assessments, develop fixture schedules and photometrics, and design lighting control systems. A critical requirement of the role is ensuring all designs comply with the California Title 24 Energy Code through the use of AutoCAD and lighting simulation software. To qualify for this engagement, the consultant must hold a valid California Professional Engineer license. Key deliverables include comprehensive existing conditions reports, photometrics, and stamped electrical construction drawings. This opportunity is managed by the California Capital Projects Construction agency, with a response deadline set for December 11, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

Architectural and Engineering (A&E) Services for a Recreation Center Lighting Upgrade

Solicitation # 26-085-RFP

The City of West Sacramento is soliciting architectural and electrical engineering design services under solicitation 26-085-RFP to modernize the lighting infrastructure and controls in Buildings KA and KB of the West Sacramento Recreation Center. The selected consultant will be responsible for developing a permitted, biddable set of construction documents and providing professional support throughout the bidding and construction phases. All designs must adhere to current California Building, Electrical, and Energy Title 24 codes, with the Department of State Architecture serving as the authority for fire-life-safety work. The procurement process utilizes a qualifications-based evaluation where the highest-ranked proposer, determined through technical scoring and interviews, will be invited to negotiate final contract terms. Proposals must be submitted via the City's e-Procurement portal by December 11, 2026, and are limited to twenty-five pages. The contract includes strict compliance requirements, including the Davis-Bacon Act, the Copeland Anti-Kickback Act, and California Labor Code section 1720 regarding prevailing wages. The City maintains the right to terminate the contract for convenience or cause with ten days written notice, and the agreement may be extended for up to two additional one-year terms.

POSTED

DEADLINE

in about 1 month

Industrial Coating Material SupplyThis subcontract for Industrial Coating Material Supply involves the provision of specialized chemical-resistant coating system components for prime contractors working on City of West Sacramento facility projects. The scope of work includes the delivery of 1/4 inch urethane cement, heavy-duty non-slip aggregate, and a polyaspartic topcoat to the project site. To ensure compliance and quality, the supplier must provide technical data sheets and safety data sheets verifying that the materials are suitable for exterior use and resistant to organic acids. Managed under the Capital Projects Construction agency in California, the contract is categorized under NAICS code 325510. The solicitation was posted on October 26, 2026, with a response deadline set for November 10, 2026. The primary objective is the timely delivery of specified quantities of coating materials and aggregates to support the facility's infrastructure requirements.

Paint and Coating Manufacturing

POSTED

DEADLINE

Industrial Concrete Ramp Coating InstallationThis subcontract for Industrial Concrete Ramp Coating Installation involves providing specialized industrial flooring services for prime contractors on City of West Sacramento facility projects. The scope of work includes comprehensive surface preparation through pressure-washing, degreasing, and shotblasting or grinding, followed by the application of a multi-layer system featuring a 1/4 inch urethane cement base coat, non-slip aggregate, and a polyaspartic topcoat to ensure a chemical-resistant and non-slip finish. Qualified contractors must hold a valid CSLB license and ensure all work complies with the 2015 Caltrans Standard Specifications. The project falls under NAICS code 238320 and requires the delivery of a fully warranted completed ramp. Interested parties must submit their responses by November 10, 2026.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Corpyard Phase II - Concrete Ramp Coating

Solicitation # 26-092-ITB

The City of West Sacramento has issued Invitation to Bid 26-092-ITB for the Corpyard Phase II Concrete Ramp Coating project. The scope of work involves providing all labor, equipment, and materials to install a commercial-grade, chemical-resistant, and anti-slip surface flooring system on a concrete ramp measuring approximately 50 feet by 78 feet. The required system consists of a 1/4-inch urethane cement base coat, non-slip aggregate, and a polyaspartic topcoat designed to withstand heavy vehicular torque, continuous tire scrubbing, and organic acid exposure from green waste. The estimated project value is 35,000 dollars, and the contract will be awarded to the apparent low bidder. Bids must be submitted through the City's e-Procurement Portal by November 10, 2026, at 2:00pm. Required submission documents include a signed W-9, legal company identification, a technical response in a single PDF, and a cost proposal entered into the electronic pricing table. Bidders must provide a bid security of at least 10 percent of the total bid price, and the successful contractor must furnish both payment and faithful performance bonds equal to 100 percent of the contract price. Compliance requirements include adherence to California Department of Industrial Relations prevailing wage rates and registration under Labor Code section 1725.5. The project must follow City of West Sacramento Standard Specifications 2002 and Caltrans Standard Specifications 2015. Additionally, the contract incorporates FHWA-1273 federal-aid construction provisions, requiring strict adherence to non-discrimination laws, safety standards, and federal debarment certifications. Contractors must also meet specific insurance requirements, including Commercial General Liability and Workers' Compensation, naming the City as an additional insured. Project administration will be managed via the Virtual Project Manager cloud-based system.

POSTED

DEADLINE

Rust Mitigation & Cold GalvanizingThis subcontract for Rust Mitigation and Cold Galvanizing supports prime contractors on capital projects for the City of West Sacramento. The scope of work involves the cleanup of welded areas and the application of Zinc-Rich Cold Galvanizing Spray to fabricated steel and welded joints in accordance with SSPC standards. The primary objective is to ensure long-term corrosion prevention, specifically delivering rust-protected welded connections for 14 containers. The project falls under NAICS code 238320 and is managed by the Capital Projects Construction agency in California. Interested parties must note the response deadline of November 10, 2026, for this specialized protective coating engagement.

Painting and Wall Covering Contractors

POSTED

DEADLINE

AWS Welding & Container SecuringThis subcontract for AWS Welding and Container Securing involves performing specialized field welding for prime contractors on capital projects within the City of West Sacramento. The scope of work requires the delivery of 168 welded angle connections, specifically welding 12 plates per unit to Conex framing and securing those plates to casting. All work must be performed using AWS certified welding equipment in strict adherence to AWS standards. To ensure quality and compliance, the installation process is subject to special inspections. The project is categorized under NAICS code 238110 and is managed through the Capital Projects Construction agency.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Chemical Anchoring & Asphalt Substrate InstallationThis subcontract for Chemical Anchoring and Asphalt Substrate Installation involves providing specialized drilling and chemical epoxy setting services for prime contractors on City of West Sacramento capital projects. The scope of work requires drilling and cleaning holes in cement-treated asphalt and utilizing the Bolthold asphalt anchoring system to install chemical and structural bonding epoxy in strict accordance with PSE stamped drawings. The project entails the delivery and installation of 672 chemical anchors. This effort falls under NAICS code 238110 and is managed through the Capital Projects Construction agency. Interested parties must adhere to the response deadline of November 10, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Structural Base Plate SupplyThis subcontract for Structural Base Plate Supply involves the provision of ASTM A36 steel angles and plates for prime contractors working on City of West Sacramento capital projects. The scope of work specifically requires the fabrication of 168 structural base plates, which must be produced in strict accordance with PSE stamped drawings and structural calculations. To ensure quality and compliance, the contractor must adhere to all ASTM A36 standards and submit detailed shop drawings for approval prior to fabrication. This project is managed under the Capital Projects Construction agency in California, with a response deadline set for November 10, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Accredited Laboratory Analysis

Los Angeles Unified School District

POSTED

DEADLINE

Accredited Analytical Laboratory Services

County Executive Office - Budget & Finance

POSTED

DEADLINE

Third-Party Testing and Certification

POSTED

DEADLINE

Ultrasonic Rail Testing and Material Certification

Maryland Transit Administration

POSTED

DEADLINE

Environmental Testing & Compliance

POSTED

DEADLINE

Material Testing Services

City of San Rafael

POSTED

DEADLINE

Construction Inspection Services

City of San Rafael

POSTED

DEADLINE

Concrete Field Testing

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Concrete Testing Services

Solicitation # WMATA-0000009583

Washington Metropolitan Area Transit Authority

POSTED

CLOSED

about 3 years ago

Laboratory Ventilation Testing and Certification

San Francisco Unified School District Facilities Design and Construction Department

POSTED

DEADLINE

Environmental Litter Analysis (ETAP)

Jefferson County, AL - Department of Roads and Transportation

POSTED

DEADLINE

in about 1 month

Pavement Marking Testing and Inspection Services

Dfw International Airport

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS