Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

INSTALL DUCTLESS A/Cs AT B-10 @ WATERVLIET ARSENAL

Awarded

W911PT26PA144Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number W911PT26PA144, authorizes the provision of all labor, materials, parts, and equipment necessary for the removal of ductless air conditioning units at Building 10 of the Watervliet Arsenal in New York. The scope of work specifically requires the removal of two 1.5-ton units located in rooms 111 and 115, as well as one 2.5-ton unit located in room 123, in accordance with SOW 25PW216. The project is managed by the Department of Defense under the agency W6QK Acc Wva. Primary administrative contact for the award is Maria DeCrescenzo, with Joseph Pokrentowski serving as the secondary point of contact. The performance of these services is centered in Watervliet, New York.

General Info

Removal of three ductless AC units at Watervliet Arsenal, New York, per SOW 25PW216.

Agency

Department Of Defense → W6QK Acc Wva

Contract Value

$81,488.49

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Awardee

AMERICAN MAINTENANCE & SUPPLIES, INC

Award Issued Date

08/17/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 18

Award Notice

AwardedAug 17

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Wva

Contacts2 people available

OfficeWATERVLIET, NY, 12189-4050, USA

Organization / AgencyDepartment Of Defense → W6QK Acc Wva

Office AddressWATERVLIET, NY, 12189-4050, USA

Contacts

Maria DeCrescenzo

contact@example.gov

+1 (555) 000-0000

Joseph Pokrentowski

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

TO PROVIDE ALL LABOR, MATERIAL, PARTS AND EQUIPMENT REQUIRED FOR
THE REMOVAL OF DUCTLESS ACs AT BUILDING 10: TWO (2) 1.5-TON UNITS IN ROOMS 111 AND
115 AND ONE (1) 2.5-TON UNIT AT ROOM 123, PER SOW 25PW216.

Similar Contracts

Same NAICS industry code

WOJC - Multi-Building Plumbing Leak Repair Project

Solicitation # WOJC – Multi-Building Plumbing Leak Repair Project

Education and Training Resources is seeking quotes for a subcontracting opportunity to perform multi-building plumbing leak repairs at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work includes replacing leaking shower P-trap drain pipes in Rooms 123 and 213, repairing a cracked drain pipe in the pipe chase of Room 216, and replacing approximately ten linear feet of leaking heat pipe sections in both the Administration Building and King Hall. All work must conform to the Massachusetts State Plumbing Code and International Plumbing Code, utilizing new commercial-quality materials suitable for hydronic heating service. The contractor is responsible for removing all debris and repairing any facility damage caused during performance at no additional cost. Interested bidders must submit a detailed quote by October 30, 2026, including a comprehensive cost breakdown of labor and materials, a proposed service schedule, and a bid validity period of at least 60 days. Required documentation includes a current SAM.gov UEI number, active registration, Massachusetts licensing, a W-9, a signed ETR Vendor Acknowledgement Form, and certificates of insurance. This is an SBA set-aside opportunity for various small business categories. Award selection is not based solely on the lowest price; ETR will evaluate cost, qualifications, and administrative compliance. The project is subject to federal regulations, including the Davis-Bacon Act, Service Contract Act, and specific FAR clauses regarding anti-lobbying and debarment. Performance bonds are required for projects exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

about 3 hours ago

DEADLINE

MI 2026-14 Emergency Heating and Air Conditioning Services

Solicitation # MI 2026-14

Adams and Associates, Inc., contracting for the U.S. Department of Labor, is soliciting bids for emergency heating and air conditioning services at the Miami Job Corps Center in Florida. The period of performance runs from November 1, 2026, to October 31, 2027. The selected vendor will provide emergency HVAC repairs, with pricing required for non-emergency daytime services (8:00 am to 4:30 pm) as well as emergency, weekend, and holiday rates. As a federally funded facility, the Center is entitled to GSA pricing. Award decisions will be based on the most responsible bidder, considering cost, licensure, experience, and insurance capabilities. Eligible bidders must be small businesses or certified socioeconomic categories, including VOSB, SDVOSB, WOSB, and HUBZone. Mandatory requirements include a valid Unique Entity ID (UEI), active SAM.gov registration, and all necessary Florida state business and employee licenses. Vendors must maintain Workers Compensation, Automobile Liability, and Comprehensive General Liability insurance of at least $1,000,000 per occurrence. The contract is subject to the Service Contract Act (Wage Determination No. 2005-2248) and the Davis-Bacon Act, with a minimum wage of $13.65 per hour applicable through December 31, 2026. Bids must be submitted on company letterhead by October 23, 2026, and include a W9, Vendor Questionnaire, Authority to Commit, and a certificate of insurance. Payment terms are NET 30 days. Personnel performing work on-site must adhere to strict security protocols, including searches and a prohibition on fraternization with students and staff. All deliveries must be coordinated through the Center's security personnel.

Miami Job Corps Center

POSTED

about 3 hours ago

DEADLINE

CBP6585 Bldg. 22 HVAC Replacement

Solicitation # CBP6585

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontracting opportunity to replace the HVAC system in Building 22 at the San Diego Job Corps Center in Imperial Beach, California. The project, categorized under NAICS 238220, has an estimated value between 0 and 25,000 dollars. The scope of work includes the removal and disposal of existing equipment and the installation of a new 5-ton condenser, furnace, 5-ton evaporator coil, condenser pad, gas flex, shut-off valve, pigtail, fused disconnect, electrical whip, and condensate drain. The contractor is responsible for providing all labor, materials, and refrigerant, and must deliver two sets of operation and maintenance manuals along with manufacturer and installer warranties. Bids are due by October 28, 2026, and must be submitted using the MTC Bid for Lump Sum Contract form. Required submission documents include a detailed cost breakout, proof of insurance, three comparable references, and a completed supplier self-certification packet. A physical site visit and signature on the attendance roster are mandatory prior to bid submission. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required, and the awarded contractor must provide performance and payment bonds equal to 100 percent of the contract price from a surety with at least an A- rating. The contract is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and the submission of weekly certified payroll. Contractors must also adhere to OSHA safety standards and provide all necessary personal protective equipment. Payment applications must be submitted to the procurement department using AIA Document G702 or an equivalent form, accompanied by a schedule of values via AIA Document G703. Final acceptance of the work is contingent upon inspection and approval by the San Diego Job Corps Center Facilities and Maintenance Department.

San Diego Job Corps Center

POSTED

about 3 hours ago

DEADLINE

MJCC EXHAUST FANS BLD. 1429

Solicitation # mjcc-exhaust-fans-bld-1429

The Muhlenberg Job Corps Center, operated by Insights Training Group LLC, is soliciting fixed-price quotes from qualified HVAC and mechanical contractors to restore the exhaust fan and louver systems in Building 1429 located in Kentucky. The scope of work includes the inspection, repair, and replacement of various components across eight exhaust fans, specifically addressing failed louver actuators, motor replacements, selector switch repairs, and the relocation of a thermostat. Contractors must provide detailed line-item pricing for each fan, separate pricing for system-wide component replacements, and detailed costs for labor and materials. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Award will be granted to a single responsible offeror based on technical acceptability and the lowest price. Key requirements include compliance with the Federal Acquisition Regulation, Davis-Bacon Act labor standards, and OSHA and EPA regulations. Contractors must be registered and licensed in the State of Kentucky, provide proof of insurance, and demonstrate the ability to secure performance and payment bonding. Administrative requirements include the submission of weekly certified payroll with every invoice and the provision of Materials Safety Data Sheets for all products used on site. The project involves a substantial completion process requiring a walk-through and final acceptance inspection. Quotes must be submitted electronically to the purchasing agent by October 30, 2026, and must include a completed New Vendor Profile and W-9 for any subcontractors.

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

about 3 hours ago

DEADLINE

Keystone Job Corps HVAC Units Maintenance

Solicitation # keystone-job-corps-hvac-units-maintenance

Keystone Job Corps

POSTED

about 3 hours ago

DEADLINE

Furnace Replacement

Solicitation # 26-17

Solicitation 26-17 is a request for bids from Management and Training Corporation for a fixed-price, lump sum contract to replace furnaces and thermostats in three staff houses at the Tongue Point Job Corps Center in Astoria, Oregon. The project involves Quarters F (3,786 sq/ft, propane), Quarters P (1,100 sq/ft, natural gas), and Quarters Q (2,280 sq/ft, propane). Required equipment must be approximately 80,000 btu, Carrier Comfort Series or equivalent, with a minimum 96 percent efficiency rating, a 10-year parts warranty, and a lifetime heat exchanger warranty. The estimated price range for the project is between 0 and 25,000 dollars. Bids are due by October 21, 2026, and will be awarded based on overall best value. Applicants must provide three references for comparable projects and submit a detailed cost breakout on company letterhead. The contract is set aside for small businesses and other socioeconomic categories. Awarded contractors must comply with the Davis-Bacon Act and Federal Contractor Minimum Wage requirements, providing weekly certified payroll. Performance and payment bonds are only required if the base bid is 25,000 dollars or greater. Final payment is contingent upon the submission of a Notice of Final Completion, a Certificate of Release of Liens, and two sets of operation and maintenance manuals.

Tongue Point Job Corps

POSTED

about 3 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of the existing dry system distribution piping network and failing air compressor across the Men's Dormitory (Building CM), Women's Dormitory (Building CW), and Recreation Building (Building D). The selected licensed fire sprinkler contractor must eliminate system leaks and install a new compressor sized according to NFPA standards to prevent equipment short-cycling. All work must adhere to NFPA 25 (2023 Edition) and local, state, and national codes, with a required performance period of 30 consecutive business days following the Notice to Proceed. Bids are due by December 1, 2026, and must be based on a mandatory site visit. Evaluation is based on overall best value and bidder responsiveness. For bids totaling $25,000 or more, a bid bond of 20% of the base bid is required at submission, and the awarded contractor must provide performance and payment bonds from an A-rated surety within five business days of the Intent to Award. Compliance requirements include adhering to Davis-Bacon prevailing wage rates for Idaho, submitting weekly certified payroll reports, and providing a 12-digit UEI number. Additionally, first-tier subcontractors with awards exceeding $45,000 must disclose debarment status per FAR 52.209-6, and contracts valued at $40,000 or more are subject to FFATA reporting.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month

MJCC HVAC BLD. 1403-04 B HALL

Solicitation # mjcc-hvac-bld-1403-04-b-hall

Insights Training Group LLC, on behalf of the Muhlenberg Job Corps Center, is soliciting fixed-price quotes for an HVAC project at Building 1403-04 B Hall in Kentucky. The scope of work requires the contractor to furnish and install two 4-ton Trane split systems with a minimum 17 SEER rating, two 95% AFUE high-efficiency gas furnaces, and matching indoor evaporator coils using R-454B refrigerant. Additional requirements include the installation of a Honeywell Pro 8000 programmable thermostat, new refrigerant line sets, condensate drain piping, and pumps. The project must be completed within 45 days of award, and the contractor is responsible for all inspections, testing, and providing necessary operating and maintenance manuals. The contract will be awarded to the responsible offeror who is technically acceptable and provides the lowest price. To be considered, bidders must be registered and licensed in the State of Kentucky, verified through the SAM portal, and provide a minimum 90-day bid guarantee along with proof of ability to secure performance and payment bonding. Compliance with the Davis-Bacon Act and Certified Payroll Wage Rate requirements is mandatory, with weekly certified payroll and a signed Statement of Compliance required for invoice acceptance. All work must adhere to local codes, manufacturer specifications, OSHA, and EPA regulations. Quotes are due by October 30, 2026, and must include detailed labor and materials costs, a W-9, and a New Vendor Profile.

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

about 3 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the replacement of twenty failed water source heat pumps at the Roswell JCC Male Dormitory Building in New Mexico. The scope of work includes the removal and off-site disposal of the damaged units and the installation of twenty new Bosch 1-ton units or equivalents. The installation must encompass all necessary ducting, electrical, gas, thermostat wiring, flexible hoses, and pressure valves. A critical safety requirement involves installing smoke dampers with fusible links in all vents leading into the plenum, ensuring all materials used in the plenum are plenum rated. All work must adhere to NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses and various SBA-certified categories. The project is subject to the Davis Bacon Act under Wage Determination NM20260014, Revision 1, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding 100,000 dollars require payment and performance bonding for 100 percent of the contract value. Submissions must include a safe work process, detailed costs for labor and materials, equipment cut sheets, warranty information, and proof of licensure and insurance. Work is to be coordinated through the Facilities Department and may be scheduled Monday through Friday from 7:00am to 4:00pm.

Career Systems Development Corporation

POSTED

about 3 hours ago

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education and Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves the excavation, location, removal, and repair of compromised piping up to 4 inches in diameter at two specific locations: behind Singletary Hall and on the east side of Harris Hall. The selected contractor must provide all labor, materials, and equipment, ensuring work adheres to industry standards, OSHA regulations, and the National Fire Protection Association's Life Safety Code. Deliverables include a one-year equipment and workmanship warranty and the submission of weekly certified payroll reports. Interested bidders must submit a detailed cost breakdown via a Bid Sheet, a proposed service schedule, and proof of required Massachusetts licensing and credentials by November 6, 2026. Mandatory administrative documentation includes a W-9, Vendor Acknowledgement Form, Certificates of Insurance, and an active SAM.gov registration with a Unique Entity ID. This solicitation is open to various small business designations, including VOSB, SDVOSB, WOSB, and HUBZone. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Depending on the final project value, contractors may be required to provide payment and performance bonds for projects exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

about 3 hours ago

DEADLINE

CBP7792 Cafeteria Hot Water Heater Replacement

Solicitation # CBP7792

Management & Training Corporation (MTC) is soliciting bids for a fixed-price lump sum subcontract to replace a failing commercial natural gas-fired water heater at the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires a licensed plumbing contractor to isolate, remove, and dispose of the existing unit and install a new 125-gallon commercial-grade water heater, specifically a Bock Model OT300N-A-H20 or an approved equivalent. The contractor is responsible for all labor, materials, permits, and testing to ensure reliable hot water service. To minimize cafeteria disruptions, utility-interrupting work must be performed during approved off-hours, such as weekends or after 8:00 PM. Bids are due by October 27, 2026, and will be evaluated based on overall best value, considering price, quality, delivery schedule, and relevant experience. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, a W-9, and a Supplier Self-Certification form. For bids equal to or exceeding $25,000, a bid bond of 20% is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety. Compliance requirements include adherence to federal, state, and local codes, as well as Davis-Bacon Act prevailing wage rates per Wage Determination NV20250040. Contractors must provide a Unique Entity ID (UEI) and, for first-tier subcontracts exceeding $45,000, disclose debarment or suspension status under FAR 52.209-6. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, a release of liens, and two sets of Operation and Maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 3 hours ago

DEADLINE

WOJC - Amana PTAC Coil Replacement

Solicitation # WOJC - Amana PTAC Coil Replacement (Administration Building)

Education and Training Resources is seeking quotes for a subcontracting opportunity to replace leaking coils in two Amana Packaged Terminal Air Conditioner (PTAC) units at the Westover Job Corps Center Administration Building in Chicopee, Massachusetts. The units are located in the first-floor conference room and the third-floor CTR classroom. The selected contractor must provide all labor, materials, and supervision to recover refrigerant per EPA Section 608, install genuine Amana OEM or approved equivalent coils, and verify the operational status of cooling, heating, airflow, and condensate drainage. A one-year equipment and workmanship warranty is required, and all work must comply with the International Mechanical Code, Massachusetts state and local codes, and OSHA safety standards. Bids are due by October 30, 2026, and a mandatory site walkthrough is scheduled for October 22, 2026. To be considered, bidders must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, Massachusetts licensing and credentials, certificates of insurance, and a completed vendor packet including a W-9 and Vendor Acknowledgement Form. The winning bidder must maintain an active SAM.gov registration and a Unique Entity ID (UEI). Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Depending on the project value, bonding requirements may apply: a 100 percent payment bond for projects between 35,000 and 150,000 dollars, and both 100 percent performance and payment bonds for projects exceeding 150,000 dollars.

Westover Job Corps Center

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

Protective Finish Application (Drawing # 7309999)This subcontract opportunity, issued by the Department of Defense under agency W6QK Acc Wva, requires a contractor to perform specialized protective coating and plating for gear rack units on Watervliet Arsenal projects. The selected provider will utilize industrial plating and surface preparation equipment to apply finishes that prevent corrosion and wear, ensuring all work strictly adheres to the specifications outlined in Drawing 7309999. The project is designated as a total Small Business Set Aside under NAICS code 332813. Interested parties must submit their responses by November 3, 2026, for performance located in zip code 12189. The primary objective is the successful delivery of finished coated gear racks that meet all technical requirements.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

Gear Rack Fabrication (Drawing # 8767202)This small business set-aside subcontract involves the manufacture of 62 gear racks for the 155MM M284 Cannon, supporting prime contractors on Watervliet Arsenal projects for the Department of Defense. The fabrication process must strictly adhere to Drawing 8767202, Revision Y and NSN 3020008611478, utilizing precision milling and gear cutting equipment. The contractor is responsible for performing First Article Testing and ensuring all units meet MIL-STD-130 and MIL-STD-129 marking standards. Final deliverables include the 62 finished gear racks and all required contract data as specified by CDRL DD Form 1423.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 7 hours ago

DEADLINE

Raw Material Supply for Machined ComponentsThis subcontract, titled Raw Material Supply for Machined Components, involves the procurement and delivery of raw metal stock, specifically tubing and billet or bar stock, to support prime contractors on U.S. Army projects. The selected provider is responsible for sourcing certified raw materials and providing necessary Mill Test Reports to guarantee full compliance with Army specifications. Managed under the Department of Defense through agency W6QK Acc Wva, the contract requires the supplier to deliver the materials directly to the designated machining facility. The opportunity is categorized under NAICS code 331210, with a response deadline set for October 27, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

Rough Machined Basecaps ProductionThis subcontract opportunity involves the production of seven rough machined basecaps for prime contractors supporting U.S. Army projects under the Department of Defense. The selected provider will be responsible for machining raw materials into basecaps using precision machining centers, CNC lathes, or milling machines to meet strict specified dimensions and tolerances. Interested parties must possess valid UEI and CAGE codes to be eligible for the award. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency. Responses are due by October 27, 2026, for performance located in zip code 12189.

POSTED

about 7 hours ago

DEADLINE

Rough Machined Tubes ProductionThis subcontract opportunity involves the production of 13 rough machined tubes for prime contractors supporting U.S. Army projects under the Department of Defense. The selected provider will be responsible for machining raw materials into tubes using CNC lathes, milling machines, or other specialized equipment to meet strict specified dimensions and tolerances. Interested parties must possess valid UEI and CAGE codes to be eligible. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency. Responses are due by October 27, 2026, for performance located in zip code 12189.

POSTED

about 7 hours ago

DEADLINE

U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)

Solicitation # W911PT26SC001

The U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) has issued solicitation W911PT26SC001, a Commercial Solutions Opening (CSO) authorized under the National Defense Authorization Act for Fiscal Year 2026 and DFARS Subpart 212.70. This competitive solicitation is open until September 30, 2027, and is designed to acquire innovative commercial products, technologies, and services to modernize the Army's Organic Industrial Base. The scope focuses on integrating manufacturing resources, linking legacy analogue systems with digital systems, and expanding modeling and simulation to enhance the delivery of materiel solutions. The CSO targets both traditional and non-traditional business entities, including small businesses and foreign-owned firms, provided they maintain an active System for Award Management (SAM) profile and a Unique Entity ID. The acquisition process follows a multi-phased approach consisting of a written solution brief, an optional presentation or pitch, and a final Request for Commercial Solution Proposal (CSP). Evaluation is based on responsiveness, technical merit, uniqueness, and price reasonableness. Successful responses may result in fixed-price contracts awarded under FAR Part 12 Commercial Item Procedures. Current Areas of Interest (AoIs) include advanced cannon technology, electrical infrastructure improvements at Building 120, chromium facility conversion, automated manufacturing for minor components, automated cooling tower treatments, advanced CNC vertical turning lathes, and advanced tooling for radial forging. Performance is primarily located at Watervliet Arsenal and Benet Laboratories, with a general period of performance not to exceed 12 months unless otherwise specified.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 7 hours ago

DEADLINE

Gear Rack, per Drawing # 8767202, Revision Y, for 155MM M284 Cannon, for the Watervliet Arsenal

Solicitation # W911PT27QA014

Solicitation W911PT27QA014 is a firm fixed price requirement for the procurement of 62 gear racks for the 155MM M284 Cannon, to be delivered to the Watervliet Arsenal in New York. The items must be manufactured according to Drawing 8767202, Revision Y, and National Stock Number 3020008611478. The procurement includes specific finish requirements, where two units must be provided without a protective finish and one unit must have a protective finish per drawing 7309999. This is a total small business set-aside under NAICS code 332710. The award will be granted to a single offeror based on the lowest evaluated offer that meets all material requirements, drawings, and responsibility criteria per FAR 9.104. Delivery is structured with first articles due 120 calendar days after the contract date, with production quantities following 90 days after first article approval or 150 days after the contract date. Strict marking and identification standards are required per MIL-STD-130 and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system. Proposals must be submitted in full for the total quantity via the PIEE Solicitation Module to be considered responsive.

POSTED

about 7 hours ago

DEADLINE

Mandrels for the Watervliet Arsenal

Solicitation # W911PT26QA139

The Department of Defense, through the ACC Watervliet Arsenal, is soliciting quotes for 10 Mandrel 155mm Assemblies for Rotary Forge under solicitation W911PT26QA139. This is a total small business set-aside procurement with a firm-fixed-price arrangement. The assemblies must be manufactured according to drawing G5573D Rev. A and G5507C Rev. H, incorporating specific component parts G5571F Rev. D, G5572D Rev. B, G5574C Rev. B-Item 2, and G5579B Rev. C-Item 2. Delivery is required by January 11, 2027, on an FOB Destination basis to Watervliet, New York. The contractor is required to provide material, heat treat, finish, and inspection certifications upon delivery. Strict quality standards apply, specifically prohibiting the use of castings or merchant quality, leaded, resulfurized, and rephosphorized steels, with wrought steels requiring standard AISI grade designation. Marking and labeling must comply with MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique item identification. Award will be based on the lowest evaluated bid that meets all material requirements and responsibility criteria, with performance risk assessed via the Supplier Performance Risk System. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 7 hours ago

DEADLINE

Heat Treatment and Mechanical Property Testing of E81 Tube and Cap Material at the Watervliet Arsenal, Watervliet NY.

Solicitation # W911PT27QA015

Solicitation W911PT27QA015 is a request for quotes for the heat treatment and mechanical property testing of E81 Tube and Cap material, specifically utilizing Ferrium M54 Alloy Steel per SAE AMS6516. The scope of work involves the processing of an estimated 13 rough machined tubes and 7 rough machined basecaps, including the manufacture of tensile and charpy specimens to validate mechanical properties according to drawing 12902048 Rev. XA and ASTM standards E8/E8M, E18, and E23. The period of performance is scheduled from November 1, 2026, to October 31, 2027, with a total award amount of 26,000 dollars. Performance will take place at the Watervliet Arsenal in New York, and the contract is designated as FOB Destination. Key requirements include strict adherence to marking and traceability standards, where shop numbers and A/B identifiers must be engraved or stamped on the tubes and specimens. Deliverables consist of heat treatment certificates, certificates of conformance, certified test reports, and detailed heat treatment data including soak times and fixturing photographs. All invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Evaluation for award will heavily weigh the contractor's ability to meet a critical delivery schedule and provide quality products that conform to the contract. Additionally, contractors must comply with strict security protocols, including the signing of non-disclosure agreements for all personnel and adherence to OSHA VPP safety rules at the Arsenal. Access to technical drawings requires an active DD Form 2345 and a valid CAGE code.

Metal Heat Treating

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Assembly of Cap, Housing AssemblyThis subcontract involves the precision machining, finishing, and assembly of the Cap, Housing Assembly (NSN: 1015014363674) for prime contractors supporting Department of the Army Watervliet Arsenal projects. The selected provider must utilize CNC machining centers and precision measurement tools to manufacture parts according to Drawing 11580065, while ensuring all mandated inspections per CLIN 0001 are completed. Managed by the Department of Defense under NAICS code 332710, the contract requires the provider to possess a DD 2345 for necessary TDP access. The response deadline for this opportunity is November 2, 2026, with performance centered in the 12189 zip code area.

POSTED

DEADLINE

Casting/Forging Manufacture for Mortar Housing AssemblyThis subcontract involves the manufacture of raw castings or forgings for mortar housing assemblies supporting Department of the Army Watervliet Arsenal projects. The selected provider must produce components in strict accordance with Drawing 11580065 and the material specifications outlined in the Technical Data Package. Deliverables include the raw casting or forging components along with corresponding Certified Test Reports. To be eligible, facilities must meet specific Army ordnance specifications and maintain a Militarily Critical Technical Data Agreement to ensure authorized access to the Technical Data Package. This opportunity is managed under the Department of Defense with a response deadline of November 2, 2026.

Iron and Steel Forging

POSTED

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports US Army 105mm M20 artillery projects through independent quality validation for prime contractors. The selected provider will perform dimensional inspections of rough machined parts based on drawing 12591138, Rev B, utilizing precision tools such as CMM, calipers, and micrometers. Key responsibilities include verifying First Article Approval, coordinating with government inspection points, and delivering detailed inspection reports. The project is managed by the Department of Defense under agency W6QK Acc Wva and will be performed in Watervliet, New York. To be eligible, contractors must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 19, 2026, with a response deadline of November 4, 2026, falling under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS