Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Insulated Aerial Lift and Utility Body Installation

Active

State & Local

Response Deadline10/14/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation of a utility body and an insulated aerial lift system for the Town of Winchester Department of Public Works. The scope of work requires mounting and integrating these systems onto an F-550 chassis, ensuring full mechanical and electrical compatibility while strictly adhering to electrical certifications and insulation safety standards. The final deliverable is a fully operational insulated aerial lift and installed utility body. The project is managed by the Office of the Town Manager in Massachusetts, with performance taking place in Winchester. Interested parties must respond by October 14, 2026, following the posting date of September 28, 2026. The contract falls under NAICS code 336212.

General Info

Install utility body and insulated aerial lift on F-550 chassis for Town of Winchester.

Agency

Massachusetts → TMA01 - Office of the Town Manager

NAICS

336212 - Truck Trailer Manufacturing

Place of Performance

Floor Winchester, MA, 01890, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-26-1354-TMA01-TMA01-133816.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Sealed Bids for One New and Unused 2027 F-550 Super Duty Truck

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineOct 14

Submission deadline

Response Deadline

10/14/2026, 02:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → TMA01 - Office of the Town Manager

ContactsNo contacts available

OfficeN/A

Organization / AgencyMassachusetts → TMA01 - Office of the Town Manager

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs installation of a utility body and an insulated aerial lift system for prime contractors on Town of Winchester Department of Public Works projects. Mounts and integrates a utility body and an insulated aerial lift mechanism, ensuring electrical and mechanical compatibility with the F-550 chassis. Requires adherence to insulation safety and electrical certifications. Delivers a fully installed utility body and operational insulated aerial lift.

Similar Contracts

Same NAICS industry code

Snow Plow Supply and InstallationThis subcontract involves the supply and installation of a snow plow system for prime contractors working on Town of Winchester Department of Public Works projects. The scope of work includes the installation of the plow blade, lift mechanism, and control systems specifically compatible with the F-550 chassis to ensure the delivery of a fully operational unit. The project is managed by the Office of the Town Manager in Massachusetts, with performance taking place in Winchester. Interested parties must submit their responses by October 14, 2026, following the posting date of September 28, 2026.

TMA01 - Office of the Town Manager

POSTED

about 14 hours ago

DEADLINE

Myco Trailer Supply and CustomizationThis small business set-aside subcontract involves the supply and customization of four brand-name Myco Trailers for prime contractors supporting Naval Sea Systems Command projects. The manufacturer is responsible for delivering fully configured and labeled trailers specifically designed for Unmanned Influence Surface Sweep vessels, with a focus on precise hull interface points and vessel weight distribution. The technical specifications require the integration of pivoting D-ring lift rated provisions in accordance with MIL-STD-209K. Performance for this Department of Defense contract will take place in Panama City Beach, Florida, under NAICS code 336212.

Naval Surface Warfare Center

POSTED

about 16 hours ago

DEADLINE

Small Business Set-Aside for MYCO Brand UISS Trailers Per Attachments.

Solicitation # N61331-26-Q-JK50

The Naval Surface Warfare Center Panama City Division is soliciting quotes for a Small Business Set-Aside procurement of four brand-name Myco Trailers, LLC Model MG40XXXHTR trailers. These specialized, hot-dipped galvanized triple-axle trailers are required to support Unmanned Influence Surface Sweep vessels and must maintain compatibility with approved transport and launch configurations. Technical specifications include the ability to launch and recover on boat ramps up to 15 degrees, compliance with Federal Motor Vehicle Safety Standards 49CFR393 and 49CFR571, and adherence to MIL-STD-209K for lifting provisions, MIL-HDBK-1791 for fixed-wing aircraft aerial delivery, and MIL-STD-1366E for highway and maritime transport. Quotes must be submitted via email to jamell.l.kilgore.civ@us.navy.mil by Monday, October 5, 2026, at 11am Central Time. Submissions must be on company letterhead, include full OEM specifications, a CAGE code, lead time, and a mandatory Authorized Resellers letter for the Myco brand. Award will be based on the best value to the government, considering price, delivery, quality, and past performance. The contract is a Firm Fixed Price agreement with NET 30 day terms, and the successful vendor must be capable of invoicing through Wide Area Workflow. Shipping costs should be listed as a separate line item if not included in the unit price.

Naval Surface Warfare Center

POSTED

about 16 hours ago

DEADLINE

18-Foot Mobile Trailer FabricationThis subcontract involves the fabrication and supply of an 18-foot mobile trailer structure for prime contractors working on Auburn University Department of Bioengineering projects. The scope of work includes the construction of the chassis, body, and exterior shell using heavy-duty materials and weather-resistant cladding to ensure structural integrity during transport. The contractor is responsible for applying all exterior finishes and delivering the completed trailer shell F.O.B. Destination. The project is categorized under NAICS code 336212 and is managed by Auburn University in Alabama. Interested parties must submit their responses by October 7, 2026, at 3:30 PM. Further details and submission processes are handled through the SciQuest bidding portal.

Auburn University

POSTED

about 23 hours ago

DEADLINE

Rebid : 18-Foot Mobile Drone Operations Trailer

Solicitation # AU-2026-0001041

Auburn University is soliciting sealed bids for the procurement of an 18-foot Mobile Drone Operations Trailer to support the Department of Bioengineering. The solicitation, identified as AU-2026-0001041, opened on September 28, 2026, with a response deadline of October 7, 2026, at 3:30 PM. Bids must be submitted through the JAGGAER Sourcing Event Portal and must be quoted as F.O.B. Destination, Freight Prepaid and Allowed. The university reserves the right to award the contract in whole, in part, or via multiple awards based on the best interests of the university and its facilities. Qualified bidders must provide a completed and notarized disclosure statement and certify compliance with Alabama state and local tax registration and remittance laws. Additionally, bidders must certify that they and their employees have not been debarred, suspended, or declared ineligible under FAR 48 C.F.R. Ch. 1 Subpart 9.4. Those with a presence in Alabama are required to upload an E-Verify Memorandum of Understanding. The contract includes a requirement for suppliers to indemnify the university and encourages the use of Small Business and Small Disadvantaged business suppliers, with reporting required if subcontracting occurs. All inquiries regarding this bid should be directed to Kyle Long via the designated Q&A Board.

Auburn University

POSTED

about 23 hours ago

DEADLINE

Supply of Utility Task Vehicles (UTVs) Side-by-SideThis subcontract agreement involves the supply of two Utility Task Vehicles (UTVs) Side-by-Side for prime contractors working on Government of British Columbia procurement projects. The selected provider must deliver units that meet all specified technical requirements, including all necessary component parts, documentation, and packaging. A critical requirement is that all electrical and electronic components must comply with CSA or ULC standards and align with British Columbia provincial safety frameworks. Managed by the Procurement Services Branch of the Province of British Columbia, the contract requires the delivery of the fully compliant vehicles to a designated delivery point. The solicitation was posted on September 28, 2026, with a response deadline of October 8, 2026. The project falls under NAICS code 336212, focusing on the procurement of specialized utility vehicles for government use.

Procurement Services Branch

POSTED

DEADLINE

Supply of Vehicle Hatch Door (NSN 2510-01-289-8823)This subcontract involves the manufacture or procurement of one Port Hatch Door, identified by NSN 2510012898823, for prime contractors supporting DLA supply contracts. The project is managed by the Department of Defense under the Land Supply Chain agency and falls under NAICS code 336212. The contractor is responsible for delivering a completed and packaged vehicle hatch door that adheres to strict technical and quality requirements. Compliance is mandatory for marking per MIL-STD-129, packaging per MIL-STD-2073-1E and RP001, and the Hazard Communication Standard 29 CFR 1910.1200, as well as the DLA Master List Technical and Quality Requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

T2 Command Bag SupplyThis subcontract involves the fabrication and supply of six T2 Command Bags for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The bags must be constructed from heavy-duty OD Green materials that strictly adhere to the military specifications for color and durability as outlined in the DLA Master List of Technical and Quality Requirements. The project is managed by the Department of Defense under the Medical Supply Chain MD SURG FSF agency, with a place of performance located at FPO 96657-2615. The contract falls under NAICS code 336212 and was posted on September 27, 2026, with a response deadline of October 5, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Naval Information Warfare Systems

POSTED

DEADLINE

Tier 2 Mobile Command Post Vehicle TrailersThe Federal Bureau of Investigation, under the Department of Justice, is forecasting a requirement for Tier 2 Mobile Command Post Vehicle Trailers. This opportunity is categorized as a full and open unrestricted competition under NAICS code 336212 and is intended for nationwide performance. Interested parties can coordinate with Melissa Golicz as the primary point of contact or Marcia Denise Kirkpatrick for small business inquiries. Further details regarding this procurement can be found through the Department of Justice contracting opportunities forecast.

Federal Bureau Of Investigation

POSTED

DEADLINE

Front-Loading Refuse Body Fabrication and InstallationThis subcontract for the City of Saskatoon involves the fabrication and installation of specialized front-loading refuse collection bodies for prime contractors. The scope of work includes manufacturing the body and integrating it onto a provided truck chassis, utilizing hydraulic systems for compaction and front-loading arms. The provider is responsible for delivering the installed body and ensuring all work adheres to OEM build sheets, mandatory technical requirements, and safety standards. The opportunity was posted on September 25, 2026, with a response deadline of October 30, 2026. Classified under NAICS code 336212, the project focuses on the production of truck trailers and specialized refuse equipment to support municipal government collection projects.

City of Saskatoon

POSTED

DEADLINE

in about 1 month

Fuel Truck Body Fabricator & UpfitterThis subcontract opportunity with the California Public Works Operations agency involves the fabrication and installation of diesel fuel and DEF delivery bodies for prime contractors operating within San Bernardino County. The selected provider is responsible for constructing the main fuel body and a DEF tank with 10 to 15 percent capacity, integrating fuel and water separators with thermostatic heating, and installing a weathertight, lockable fuel control terminal. The final deliverable must be a fully installed delivery body that adheres to all CARB and DOT compliance standards. Interested parties must submit their responses by October 13, 2026, for work to be performed in San Bernardino, California.

Public Works - Operations

POSTED

DEADLINE

More opportunities from Massachusetts → TMA01 - Office of the Town Manager

Same awarding agency

2027 F-550 Super Duty Chassis SupplyThis subcontract agreement involves the supply of one new and unused 2027 Ford F-550 Super Duty chassis to support prime contractors working on projects for the Town of Winchester Department of Public Works. The vehicle must meet heavy specifications, featuring four-wheel drive and dual rear wheels. The procurement is managed by the Office of the Town Manager in Massachusetts, with the place of performance located in Winchester. The solicitation was posted on September 28, 2026, and required responses by October 14, 2026, under NAICS code 441110.

New Car Dealers

POSTED

about 14 hours ago

DEADLINE

Sealed Bids for One New and Unused 2027 F-550 Super Duty Truck

Solicitation # BD-26-1354-TMA01-TMA01-133816

The Town of Winchester, through the Office of the Town Manager, is soliciting sealed bids for the procurement of one new and unused 2027 F-550 Super Duty chassis truck. The vehicle must be configured with heavy specifications, including a utility body, dual rear wheels, 4-wheel drive, an insulated aerial lift, and a plow. This solicitation is identified by bid numbers BD-26-1354-TMA01-TMA01-133816 and FY27-105, with the NAICS code 336120. Sealed bids must be submitted to the Department of Public Works at 15 Lake Street, Winchester, MA 01890, by October 14, 2026, at 9:00 a.m. Bids must be clearly marked with the bidder's name, address, the bid number, and the item description. The Town reserves the right to make the award in its best interest. Brian Wyncoop serves as the primary purchaser and point of contact, and additional bid documents can be requested via email from the Department of Public Works.

Heavy Duty Truck Manufacturing

POSTED

about 14 hours ago

DEADLINE

Sod Supply and InstallationThis subcontract agreement involves the supply and installation of high-quality sod for sports facility projects at Ginn Field in Winchester, Massachusetts. The selected provider will support prime contractors by performing comprehensive site preparation, including grading, leveling, and the use of soil amendments, sod cutters, and rollers to ensure a professional playing surface. The project is managed by the Office of the Town Manager for the Town of Winchester under NAICS code 561730. Interested parties must submit their responses by September 30, 2026, following the posting date of September 9, 2026.

Landscaping Services

POSTED

DEADLINE

Irrigation System InstallationThis subcontract for the Town of Winchester involves the installation of a complete irrigation system at the Ginn Field sports facility. The selected contractor will be responsible for the installation of irrigation piping, sprinkler heads, and control systems, which includes conducting site visits to determine layout requirements and utilizing specialized trenching equipment. To be eligible, the provider must hold standard plumbing or irrigation contractor licenses and deliver a fully operational system. The project is managed by the Office of the Town Manager in Massachusetts, with the place of performance located in Winchester, 01890. The solicitation was posted on September 9, 2026, and the deadline for responses is September 30, 2026. This work falls under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ginn Softball Fields

Solicitation # BD-26-1354-TMA01-TMA01-133244

The Town of Winchester, through the Office of the Town Manager, has issued an open market bid solicitation, number BD-26-1354-TMA01-TMA01-133244, for softball field improvements at Ginn Field. The scope of work specifically requires the installation of sod and irrigation systems. The solicitation was posted on September 9, 2026, with a response deadline and bid opening date of September 30, 2026. A required completion or delivery date is noted as September 16, 2026. Bidders are mandated to visit Ginn Field to acquaint themselves with the existing site conditions and thoroughly examine all contract documents. The primary point of contact for the procurement is Purchaser Anthony DiGiovanni, while Brian Wyncoop serves as the ship-to contact and bill-to address for the project. The project falls under NAICS code 561730 and is managed as a non-statewide solicitation.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS