ITT - SOA - Material Testing and Inspection Services

IE080408_81385, Material Testing and Inspection Services– Standing Offer Agreement Defence Construction Canada (DCC) is calling for abbreviated proposals from consulting firms to award a Standing Offer Agreement (SOA) to provide “as and when required” the following professional services at Dwyer Hill Training Centre, Ontario, Ontario: Sampling and testing of concrete, Asphalt and Aggregates. Gradation (Sieve) Analysis. Modified Proctor. Standard Proctor. Concrete Compression Test. Concrete Air and Slump Test. Concrete Core Analysis. Mortar or grout compressive test. Asphalt Marshall Analysis. Asphalt Cores. Super Pave. Mass Concrete Temperature Monitoring. Confirmation of bearing capacity. Soil and Rock at foundation inspection and recommendations. Quality Auditing of structural steel. Flexural Strength Concrete Test. In place compaction testing. In place density testing. Information provided by the Proponents will be evaluated using the established criteria in the ITT. The objective of this ITT is to select the Proponent with the highest total score. The SOA will be for a period of two (2) years with a maximum estimated value of $885,000. If mutually agreeable between the Consultant and DCC, the SOA may be extended for up to three (3) additional one (1) year periods and increased by a value of $975,000 at any time. Call-ups under the SOA are expected to be valued between $ 5,000 and $ 25,000. Refer to the ITT document for additional information. This solicitation is being conducted in accordance with the requirements set out in the Canadian Free Trade Agreement (CFTA), Chapter Nineteen of the Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and the World Trade Organization Agreement on Government Procurement (WTO-GPA). Firms that consider themselves qualified to provide these services are invited to submit their Abbreviated Proposals through the MERX Electronic Bidding System on or before the closing date and time indicated on the Electronic Bidding System. The selected consultant will be required to hold a valid Designated Organization Screening (DOS), issued by the Contract Security Program (CSP) within Public Works and Government Services Canada (PWGSC).  Details concerning the Security Requirements for this project are identified in the ITT documents. Questions regarding this solicitation are to be directed ONLY to the point of contact identified in this advertisement.  Proponents who address their questions to anyone other than the point of contact during the solicitation period may, for that reason alone, be disqualified. Proponents can obtain contract award results from the DCC Website at Contract Activity - Defence Construction Canada (dcc-cdc.gc.ca).description : Project Manager Gestionnaire de projetunitOfMeasure : Hourly Ratedescription : Geotechnical Engineer Ingénieur en géotechniqueunitOfMeasure : Hourly Ratedescription : Technologist or Technician - Senior Technologue ou technicien – seniorunitOfMeasure : Hourly Ratedescription : Technologist or Technician - Intermediate Technologue ou technicien – intermédiaireunitOfMeasure : Hourly Ratedescription : Technologist or Technician - Laboratory Technologue ou technicien – laboratoireunitOfMeasure : Hourly Ratedescription : Structural Steel Inspector – Senior Inspecteur de charpentes d'acier – seniorunitOfMeasure : Hourly Ratedescription : Structural Steel Inspector - Intermediate Inspecteur de charpentes d'acier – intermédiaireunitOfMeasure : Hourly Ratedescription : Total Classification Rate Taux horaire pondéré totalunitOfMeasure : Hourly Ratedescription : a. Gradation Analysis (LS 600, LS 602) a. Analyse granulométrique (LS 600, LS 602)unitOfMeasure : Dollardescription : b. Densometer Test (minimum three per visit) ASTM D6938 b. Essais de porosité (au moins trois par visite) ASTM D6938unitOfMeasure : Dollardescription : c. Atterberg Tests ASTM D4318 c. Essais d’Atterberg ASTM D4318unitOfMeasure : Dollardescription : d. Standard Proctor - 100mm mould (LS-706 ASTM D 698) d. Essai Proctor normal – moule de 100 mm (LS-706 ASTM D 698)unitOfMeasure : Dollardescription : e.Modified Proctor - 100mm mould (LS-706 ASTM D 1557) e. Essai Proctor modifié – moule de 100 mm (LS-706 ASTM D 1557)unitOfMeasure : Dollardescription : f. Concrete cylinder test (set of 3 cylinders) CSA A23.2-14 / A23.2-9C f. Essai de cylindres de béton (ensemble de 3 cylindres) CSA23.2–14 / A23.2–9CunitOfMeasure : Dollardescription : g. Concrete mortar cylinder test (set of 3 cylinders) g. Essai de cylindres de béton et mortier (ensemble de 3 cylindres)unitOfMeasure : Dollardescription : h. Additional concrete cylinder compressive test CSA A23.2-9C h. Essais de compression de cylindres de béton supplémentaires CSA A23.2-9CunitOfMeasure : Dollardescription : i. Concrete Air & Slump test (A23.2–4C, 5C) i. Essai d’affaissement et d’air occlus du béton (A23.2–4C, 5C)unitOfMeasure : Dollardescription : j. Mortar or grout compressive tests CSA A179-04 (set of 6 cubes) j. Essais de compression du mortier ou du coulis CSA A179-04 (ensemble de 6 cubes)unitOfMeasure : Dollardescription : k. Concrete Core Analysis (including post-core patching) (up to 200mm deep) CSA A23.2-14C k. Analyse de noyaux de béton (y compris la réparation après l’analyse) (jusqu’à 200 mm de profondeur) CSA A23.2-14CunitOfMeasure : Dollardescription : l. Rapid Chloride Permeability Test ASTM C1202 l. Essai rapide de perméabilité aux ions chlore ASTM C1202unitOfMeasure : Dollardescription : m. Full Marshall Test (LS 262, 263, 264, 266) m. Essai Marshall complet (LS 262, 263, 264, 266)unitOfMeasure : Dollardescription : n. Marshall Density of Cores:- bulk relative density (LS 262) n. Densité Marshall des noyaux : densité relative brute (LS 262)unitOfMeasure : Dollardescription : o. Marshall Density of Cores: -maximum relative density (LS 264) o. Densité Marshall des noyaux : densité relative maximale (LS 264)unitOfMeasure : Dollardescription : p. Washed Sieve Analysis (LS602) p. Analyse granulométrique par voie humide (LS 602)unitOfMeasure : Dollardescription : q. Asphalt Densities nuclear densometer (min 4 tests/visit) ASTM D6938 q. Essais de la densité de l’asphalte au moyen d’un densimètre nucléaire (au moins 4 essais par visite) ASTM D6938unitOfMeasure : Dollardescription : r. Asphalt Cores (up to 100mm deep) (including post-core patching) (minimum three (3) per visit) ASTM D2726, D3549, D5361 r. Carottes d’asphalte (jusqu’à 100 mm de profondeur) (y compris la réparation après l’analyse) (au moins trois [3] par visite) ASTM D2726, D3549, D5361unitOfMeasure : Dollardescription : s. Asphalt Cement Content and Gradation (LS 282) s. Teneur et granulométrie du ciment d’asphalte (LS 282)unitOfMeasure : Dollardescription : t. Super pave (full analysis) t. Chaussées en asphalte aux performances supérieures (Super pave) (analyse complète)unitOfMeasure : Dollardescription : u. Magnetic Particle Inspection (for 4 hours) u. Contrôle magnétoscopique (4 heures)unitOfMeasure : Dollardescription : v. Ultrasonic Examination of complete penetration welds (for 4 hours) v. Vérification par ultrasons des soudures à pénétration complète (4 heures)unitOfMeasure : Dollardescription : w. Ultrasonic Testing of splice of joist or truss chord members (for 4 hours) w. Essai par ultrasons des entures des solives ou des membrures de fermes (4 heures)unitOfMeasure : Dollardescription : x. Perform bend test in accordance with CSA W59 (for 4 hours) x. Exécution d’essais de pliage conformément à la norme CSA W59 (4 heures)unitOfMeasure : Dollardescription : Total Weighted Unit Cost for Samples, Tests, Analysis and Reporting Coût unitaire pondéré total pour les échantillons, les tests, les analyses et les rapportsunitOfMeasure : DollarBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.