This Combined Synopsis/Solicitation opportunity from Department Of Transportation was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Laboratory Analysis - Phase II Environmental Site Assessment - Fort DuPont, Delaware City, DE

Closed

6913G626Q300052Federal

Submission Closed09/15/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract involves providing specialized testing and certification services for the DLA Weapons Support Active Devices Division. The primary objective is to conduct First Article Testing on a single prototype unit to ensure full compliance with MIL-DTL-24231/2E standards. The selected provider must utilize precision measurement and testing equipment and perform quality assurance inspections following either ASQ H1331 or MIL-STD-1916 sampling methods. The project deliverables include the return of the tested First Article Testing unit and a comprehensive First Article Test Report. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Material TestingThis subcontract for Third-Party Quality Assurance and Material Testing supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent sampling and testing of manufactured collars for prime contractors, with work performed at Robins Air Force Base. The scope of work involves conducting inspections based on MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes according to AQL requirements. Technical execution requires the use of specialized equipment, including CMM, hardness testers, and destructive testing tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering comprehensive inspection reports and quality certification documents. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform Production Lot Testing for prime contractors on DLA supply contracts to validate the quality and functionality of manufactured cable assemblies. Specifically, the contractor must verify that assemblies meet the technical specifications of NSN 6150-01-091-6989 using signal analyzers, insulation resistance testers, or continuity testers. The contractor is required to be compliant with ITAR or EAR regulations and must deliver comprehensive test reports and certification of production lot requirements. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance Sampling and Inspection ServicesThis subcontract for Quality Assurance Sampling and Inspection Services is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider will perform independent sampling and quality inspections for prime contractors on Navy hardware procurements, ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards. Key responsibilities include verifying bare item markings against MIL-STD-129, validating packaging according to MIL-STD-2073-1E, and ensuring all traceability documentation meets NAVAIR requirements. The contractor is required to deliver detailed inspection reports and certifications of compliance to validate the quality of the hardware. This opportunity falls under NAICS code 541380 and is designated for performance at FPO 96672. Interested parties must submit their responses by the deadline of November 6, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves performing First Article Testing and Certification for prime contractors. The scope of work requires the testing of two units of NSN 6685014827329 to ensure manufacturing compliance in accordance with FAR 52.209-3 and Procurement Note H03. To verify pressure ranges and tolerances, the contractor must utilize certified calibration laboratory equipment and provide a formal First Article Test Report upon completion. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Certification for Aerospace FastenersThis subcontract involves providing third-party quality assurance and certification for aerospace fasteners on behalf of the DLA Weapons Support ASC Commodities Division. The selected contractor will perform independent inspections of shear bolts to verify dimensional and material compliance with NAS6603 through NAS6620 and NAS1303 through 1320 standards. Additionally, the contractor is responsible for auditing markings and packaging according to MIL-STD-129, MIL-STD-130N, and ASTM D3951 using calibrated precision measurement tools. The work will be performed at Tinker AFB and requires the contractor to hold ISO 9001 or AS9100/AS9003 certification. Key deliverables include detailed inspection reports and Certificates of Conformance. This opportunity falls under NAICS code 541380 and has a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days

AI Contract Overview

The U.S. Department of Transportation's Volpe National Transportation Systems Center is awarding a firm-fixed-price purchase order for analytical laboratory services to support a Phase II Environmental Site Assessment at the Fort DuPont Parade Ground in Delaware City, Delaware. This effort is conducted under an Interagency Agreement to support the EPA's Targeted Brownfields Assessments Program. The primary objective is to determine if contamination from former military operations has impacted soil or groundwater. The contract is intended as a sole source award to Alpha Analytical, with an estimated value of 77,455.50 dollars, as they are one of the few laboratories approved under the EPA Region 3 generic Quality Assurance Project Plan. The contractor is responsible for providing all necessary sample containers, preservatives, and labels, as well as a daily local courier for an anticipated three days of sampling. Analytical services include testing for metals, cyanide, VOCs, SVOCs, TPH-DRO, TPH-GRO, PCBs, and pesticides. Results will be compared against the Delaware Department of Natural Resources and Environmental Control Hazardous Substance Cleanup Act screening levels. The period of performance runs from the date of award through January 31, 2027, with final electronic reports due ten business days after the final sample is received. This procurement is designated as a total small business set-aside.

General Info

Alpha Analytical provides laboratory services for environmental site assessment at Fort DuPont, Delaware.

Agency

Department Of Transportation → 6913G6 Volpe National Transportation System Cntr

Contract Value

$48,390

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Delaware City, DE, 19706, USA

Set-Aside

SBA

Awardee

PACE ANALYTICAL SERVICES, LLC

Award Issued Date

09/21/2026, 12:00:00 AM UTC

Documents

RFQ 6913G626Q300052 Laboratory Analysis for Phase II ESA

rfq

High

V3262203 Sole Source Justification

justification-and-authorization

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 25

Combined Synopsis

Response DeadlineSep 15

Deadline has passed

Submission Closed

09/15/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Transportation → 6913G6 Volpe National Transportation System Cntr

Contacts1 person available

OfficeCAMBRIDGE, MA, 02142, USA

Organization / AgencyDepartment Of Transportation → 6913G6 Volpe National Transportation System Cntr

Office AddressCAMBRIDGE, MA, 02142, USA

Contacts

Roland Regan

contact@example.gov

Full Description

Introduction: It is the intent of the Government to award a sole source purchase order for analytical laboratory services from Alpha Analytical as cited in the attached Sole Source Justification. Under an Interagency Agreement, the U.S. Departme nt of Transportation John A. Volpe National Transportation Systems Center (Volpe Center) is providing support to the U.S. Environmental Protection Agency (EPA) Targeted Brownfields Assessments (TBA) Program. As part of this effort, a Phase II Environmental Site Assessment (ESA) that includes a requirement for laboratory analysis will be conducted at the Fort DuPont Parade Ground (the Site) located at 260 Old Elm Ave, Delaware City, Delaware.

Background: The objective of this Phase II ESA investigation is to determine if known contamination stemming from former military operations at the Fort DuPont property has impacted soil or groundwater at the Parade Ground (OU-9). Laboratory analytical data from soil and groundwater samples obtained through the advancement of soil borings and the installation of groundwater monitoring wells will be collected. Analytical results will be compared the Human Health and Ecological Screening Levels published in the Delaware Department of Natural Resources and Environmental Control (DNREC) Hazardous Substance Cleanup Act (HSCA) Screening Level Table Guidance Appendix A tables. Soil samples will be compared to the Soil (Direct Contract) HSCA Human Health Screening Levels and the Ecological Surface Soil Screening Levels. Groundwater samples will be compared to the Groundwater HSCA Human Health Screening Levels.

Tasks to be Performed: The Phase II ESA investigation includes the Contractor tasks listed below. The Contractor shall conduct all work in accordance with Federal, State and local requirements. Where inconsistencies exist, the Contractor shall follow the most stringent requirements.

1) Sample Containers, Handling, and Delivery: The Contractor shall provide the appropriate sample containers, disposable volatiles samplers, preservatives, pre-printed labels, and analyte-free water required for the analyses listed below. These are to be delivered by the Contractor to the project site location. Sample collection and handling will be performed by Volpe personnel. The laboratory shall provide a daily local courier to transport the samples from the Site to the laboratory over an anticipated three days of sampling. Whenever possible, the Contractor shall minimize the number of sample containers by combining compatible analyses into a single container, as allowed by EPA methods and laboratory standard operating procedures.

2) Sample Analysis: Metals, Cyanide, VOCs, SVOCs, TPH-DRO, TPH GRO, PCBs, Pesticides, VOC Trip Blank, Metals, Cyanide, VOCs, SVOCs, TPH-DRO, TPH GRO, PCBs, Pesticides.