Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

LED Message Display & Controller Supply

Active

Federal

Response Deadline08/05/2026, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of high-brightness, weather-resistant LED message boards equipped with real-time speed feedback and programmable safety messaging capabilities, alongside integrated control software and remote management functionality. These displays are intended for deployment at Luke Air Force Base and must reliably operate in demanding environmental conditions while delivering dynamic safety communications to enhance site awareness and operational safety. The procurement is structured as a subcontract with a Total Small Business Set-Aside under the SBA program, meaning only eligible small businesses may submit proposals. The NAICS code 334118 applies to this solicitation, categorizing it under other electronic component manufacturing. The response deadline is August 5, 2026, and the award will be managed by the Department of Defense through the FA4887 56 Cons Cc office. All equipment must meet performance standards for durability, clarity, and remote controllability to ensure consistent, real-time communication capabilities at the designated installation location.

General Info

Small business subcontract for weather-resistant LED boards with remote management, due August 5, 2026, for Luke Air Force Base.

Agency

Department Of Defense → FA4887 56 Cons CcView Agency

NAICS

334118 - Computer Terminal and Other Computer Peripheral Equipment ManufacturingView NAICS

Place of Performance

Luke Air Force Base, AZ, 85309, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 10:30:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4887 56 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4887 56 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high-brightness, weather-resistant LED message boards with real-time speed feedback and programmable safety messages, including control software and remote management capability.

Similar Contracts

Same NAICS industry code

Interactive Display Hardware SupplyThe contract is for the supply of five DTEN D7X 75-inch Windows Edition interactive displays, with all units required to undergo factory testing, proper packaging, and full preparation for shipment. The equipment is intended for delivery to a specific location in West Barnstable, Massachusetts, with the zip code 02668. The solicitation falls under the NAICS code 334118, indicating it pertains to other computer peripheral equipment manufacturing, and is classified as a subcontract. The posting date is July 24, 2026, with a response deadline of August 7, 2026, giving potential vendors a limited window to submit proposals. The contracting entity is Cape Cod Community College, operating under the Massachusetts state organization, and while no specific point of contact is listed, the place of performance and official agency name provide clear context for delivery and accountability. The contract does not specify any set-aside preferences or additional procurement restrictions.

1373CONVD - Cape Cod Community College

POSTED

DEADLINE

INL_RFQ-PR16105152 3D printers and suppliesThe U.S. Department of State, through the International Narcotics and Law Enforcement Affairs Office at the American Embassy in Bogota, is seeking qualified vendors to provide 3D printers and associated supplies under solicitation INL_RFQ-PR16105152. Interested parties must submit quotations by August 21, 2026, at 4:00 p.m. Eastern Time via email to AlejoA@state.gov and BogotaINLSolicitation@state.gov, with no exceptions accepted after this deadline. This solicitation serves as both the combined synopsis and the complete request for quotations, in compliance with FAR Subpart 12.6, and no further written solicitation documents will be issued. Vendors must strictly adhere to the instructions in Section 3 of the RFQ document to be considered for award. The North American Industry Classification System code for this requirement is 334118, and while the place of performance is in Colombia, the contracting office is based in Washington, D.C. The primary point of contact for inquiries is Andres Alejo Salguero.

American Embassy Bogota - Nas

POSTED

DEADLINE

Vendor TBDThe District of Columbia’s Department on Disability Services is forecasting a future procurement for self-service kiosks designed for micro markets and hybrid environments, though the vendor has not yet been identified. This anticipated contract aims to support accessibility and operational efficiency through automated retail solutions that align with the agency’s mission to serve individuals with disabilities. The solicitation is published as a forecast with no official solicitation number, indicating it is currently in the planning phase and not yet open for bids. The contract will focus on deploying kiosk technology that enables convenient, contactless access to goods and services within facilities operated by or partnered with the Department on Disability Services. While details such as NAICS codes, set-aside classifications, and specific performance locations have not been defined, the procurement is expected to prioritize equitable access, user-friendly interfaces, and seamless integration with existing service delivery models. Interested parties should monitor the official portal for updates, as formal solicitation documents and bid opportunities will be released at a later date.

Department on Disability Services (DDS)

POSTED

DEADLINE

High-Speed Data Processing Hardware SupplyNASA Shared Services Center is seeking a small business to supply a commercial off-the-shelf 1U Paraid X-5000 data processing unit designed for telemetry decomposition with IRIG time code synchronization, supporting PCM bit sync rates up to 30 Mbps and featuring embedded audio and serial outputs. The requirement is for a fully compliant, ready-to-deploy hardware solution capable of high-speed data handling in demanding aerospace environments, with performance tailored to mission-critical telemetry applications. The contract is structured as a total small business set-aside under FAR 19.5, aligned with NAICS code 334118, and responses are due by July 30, 2026, with the anticipated place of performance located in Edwards, California, where the equipment will be integrated and tested for operational use.

NASA Shared Services Center

POSTED

DEADLINE

Parraid X-5000 w/ Omega NExT software licenseThe contract solicitation for the Paraid X-5000-1BD-002 Compact 1U Decom Processing Unit and the OMEGA-NEXT Professional software license bundle (NEXT-PRO-02) is a total small business set-aside under NAICS code 334118, with a firm-fixed-price structure and a lowest price technically acceptable evaluation methodology. The solicitation mandates delivery of exactly one unit of each item to NASA Armstrong Flight Research Center in Edwards, California, no later than February 1, 2027, under FOB Destination terms, with inspection and acceptance occurring at that location. All quotes must be submitted exclusively in PDF format via email to Cara Craft at NASA Shared Services Center by July 30, 2026, at 1:00 p.m. Central Time; submissions in any other format will be rejected outright. Vendors must provide manufacturer proof of pricing and reseller authorization, and the contract value is not predetermined, with the final price to be determined upon award and explicitly noted as TBD in the contract clause. The contract imposes stringent compliance obligations, including adherence to export control regulations under ITAR and EAR, requiring licenses for hardware, technical data, software, and technical assistance, particularly where foreign persons are involved or work is performed on-site at NASA facilities. Contractor personnel must undergo Personal Identity Verification under HSPD-12 for facility access, and all employees must be informed of whistleblower protections. Unauthorized release of sensitive information is prohibited, and duty-free entry must be claimed and documented for any imported goods. The contractor is also required to maintain SAM.gov registration, provide a valid CAGE code, and self-certify small business status. While no formal packaging, preservation, or marking standards are detailed, all shipments must be clearly labeled with “UNITED STATES GOVERNMENT” and the contracting agency’s name, include the contract number, delivery address, and carrier details, and support duty-free entry claims. No government property is to be furnished, and accelerated payments to small business subcontractors are required. There are no option periods, key personnel requirements, or organizational conflict of interest clauses specified, and no evaluation factors beyond technical acceptability and lowest price are provided.

NASA Shared Services Center

POSTED

DEADLINE

CISCO Call Server Hardware SupplyThe contract is for the procurement and delivery of physical Cisco call server hardware units to support a unified communications system in Kingston, Jamaica, under the auspices of the Government of Jamaica through the Planning Institute of Jamaica. The hardware is essential for enabling reliable voice and communication services within the government’s infrastructure, with the place of performance firmly located in Kingston. The solicitation is classified as a subcontract and falls under the NAICS code 334118, which pertains to other communications equipment manufacturing. The contract was posted on July 22, 2026, with bids due by August 14, 2026, at 4:59 AM, indicating a narrow window for proposal submissions. Although no specific set-aside or procurement preference is indicated, the procurement is managed through the Government of Jamaica’s electronic procurement portal, with all relevant documentation accessible via the provided UI link. The absence of detailed contact information or geographic specifics in the address fields suggests that logistical coordination and delivery arrangements will be finalized by the selected vendor in alignment with government requirements.

Planning Institute of Jamaica

POSTED

DEADLINE

DISK DRIVE UNITThe contract pertains to the procurement of six Disk Drive Units under NSN 7025-01-615-5219, issued as a fully competitive solicitation through the Department of Defense via the DLA, with solicitation number SPE8EN-26-T-2663. The request is for delivery within 167 days of award, with performance located in Tracy, California, 95304-5000. The solicitation is open until August 3, 2026, and requires compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, as well as applicable technical and quality requirements listed in the DLA Master List. All supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be verified at designated levels or AQLs. Drawings are accessible during the open solicitation period via the DIBBS portal, and the acquisition falls under NAICS code 334118 for computer and peripheral equipment manufacturing. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

MICROCIRCUIT, DIGITAThis contract is for the procurement of five digital microcircuits under Federal Supply Class 5962, with the NSN 5962010972446 and part number 615677-901 from Raytheon Company, or an equivalent approved source. The item is classified as a critical application component, requiring strict adherence to supply chain traceability, counterfeit prevention, and packaging standards mandated by the Defense Logistics Agency. All suppliers must be listed on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, and must comply with DLA Procurement Note C03 regarding retention of supply chain documentation. Traceability and test reports must be submitted electronically via email at least 15 days before delivery, limited to 15 megabytes per email, with filenames formatted to include contract number, CLIN, and NSN. Shipment cannot occur until written authorization is received from the contract administrator, and each lot must include a completed DLA Land and Maritime Form 918 and proof of shipment authorization inside the packaging. Failure to comply voids payment. The microcircuits must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific requirements for lead finish identification per IPC/JEDEC J-STD-609, including clear labeling of lead content (Pb or Pb-Free). ESD and EMI protections are mandatory under MIL-PRF-81705, requiring Type I and Type III barrier materials from qualified manufacturers listed on QPL-81705. Cushioning must meet A-A-59136, Class 1, Grade B, with densities between 1.7 and 2.2 pounds per cubic foot and a minimum thickness exceeding the lead length by at least 1/8 inch, or use form-fitting ESD containers that immobilize components. The delivery point is origin, with inspection and acceptance at destination, and the final shipment due date is January 5, 2027, with an original required delivery date of January 20, 2027. All documentation, packaging, and marking must reflect current DLA directives, and suppliers are responsible for ensuring compliance with all technical and quality requirements referenced in the DLA Master List and procurement notes.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONVERTER, DIGITAL TThis contract, issued by the Defense Logistics Agency under solicitation SPE8EN-26-T-2657, requires the procurement of six digital converter units, part number BB-485LDRC9, with an NSN of 7050016988695, at a unit price of $6.00 for a total contract value of $36.00. Delivery is required within 167 days after award, with shipment FOB origin to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, and inspection and acceptance will occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E using preservation method 10 (clean/dry), fiberboard boxes for unit and intermediate containers, and a unit pack code U, while marking and labeling adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 packaging requirements, and all materials must be shipped using WAWF for invoicing and receiving report submissions. The contract incorporates stringent technical, environmental, and compliance obligations referencing the DLA Master List of Technical and Quality Requirements and prohibits the intentional addition of mercury or mercury-containing compounds to supplied hardware, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing items requiring shockproof design and secondary containment per NAVSEA 5100-003D. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard, with pre-award submission of safety data sheets required, and transportation by sea mandates the use of U.S.-flag vessels unless a formal waiver is obtained at least 45 days in advance, with post-shipment documentation of vessel flag, cargo details, and freight records mandatory. The contract includes multiple FAR and DFARS clauses covering cybersecurity safeguards under NIST SP 800-171, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, electronic payment compliance, and prohibitions on acquisition of covered defense telecommunications equipment or hexavalent chromium. Offerors must self-certify their small business status, provide UEI and CAGE codes where applicable, and comply with all representations and certifications, including disclosures related to joint ventures or covered defense telecommunications. Although the contract type and evaluation methodology are not explicitly stated, award is subject

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

KEYBOARD, DATA ENTRYThe contract is for the procurement of 16 keyboard, data entry units under solicitation SPE8EN-26-T-2651, with a total price of $256.00 at $16.00 per unit. Delivery is required within 128 days FOB origin, with inspection and acceptance point at destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, material specifications, and unit packaging code U, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must adhere to DLA packaging requirements, and the shipment is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 7025-01-605-4972 and is subject to restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with supplies unless exempted for specific functional uses such as batteries, lighting, or instrument controls as defined by NAVSEA, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary. The contract incorporates technical and quality requirements referenced in the DLA Master List, and covered defense information applies to the supplier. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 334118, managed by the Department of Defense under the Construction & Equipment T & IFO EQ office, with point of contact Jennifer Esworthy.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

COMPUTER SUBASSEMBLThis contract pertains to the procurement of a computer subassembly identified by NSN 7050-01-659-4670 and part number 1756-IF8I, supplied by ROCKWELL AUTOMATION, INC., with a total quantity of three units. The items must be delivered FOB origin within 167 days from the contract award, with no tolerance for variance in quantity. Delivery is required to the designated warehouse in Tracy, California, and all packaging must comply fully with MIL-STD-2073-1E and DLA’s packaging requirements, including adherence to MIL-STD-129 marking standards and specific packing methods such as preservative treatment, intermediate container use, and unit packaging code U. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance. The contract includes provisions for inspection and acceptance at destination and references DLA transportation procedures for shipping and delivery logistics. The solicitation number is SPE8EN-26-T-2655, issued under a federal acquisition framework with a response deadline of August 3, 2026, and the original required delivery date is September 21, 2026, with a need ship date of January 18, 2027.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

COMPUTER SUBASSEMBLThis contract specifies the procurement of a computer subassembly identified by NSN 7050016942565 and part number 1756-L81E from ROCKWELL AUTOMATION INC, with a quantity of four units to be delivered FOB origin within 167 days. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containment, while marking must follow MIL-STD-129 with no special marking codes. The delivery destination is Tracy, California, to DLA District San Joaquin, with inspection and acceptance occurring at the point of delivery and no variance allowed in quantity. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shock-proofing and a secondary containment boundary per NAVSEA standards. The contract falls under solicitation SPE8EN-26-T-2666, originally posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 334118. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is governed by DoD standards referenced via an official DLA Excel sheet. The point of contact for the procurement is Jennifer Esworthy, and the purchase request number is 7017585620, with a total contract value based on a unit price of $4.00 per item. The original required delivery date was October 16, 2026, with a need ship date of January 18, 2027, indicating potential scheduling flexibility. The contract also includes provisions for the removal of government identification from non-accepted supplies and designates the covered defense information provisions as potentially applicable.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4887 56 Cons Cc

Same awarding agency

Heavy Equipment and Rigging ServicesThis contract calls for heavy equipment and rigging services to facilitate the access and replacement of large sunshade components requiring elevated work, typically involving lifts, cranes, or specialized rigging operations. The work is essential for maintaining structural and operational integrity at Luke Air Force Base, where precise and safe handling of oversized components is critical in a high-security military environment. All tasks must be performed in compliance with stringent safety and quality standards due to the nature of the facility and the critical function of the sunshade systems. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, with the NAICS code 238990 covering other special trade contractors. The posting date is July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. Performance is solely located at Luke Air Force Base in Arizona, with the contracting activity under the Department of Defense, specifically FA4887 56 Cons Cc. Interested bidders must be certified as small businesses and prepared to execute complex, precision-based operations in a controlled military setting.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Material Supply – Shade FabricThe contract calls for the supply of high-durability architectural fabric specifically designed for replacing sunshade canopies, with stringent requirements for UV resistance, tensile strength, and fire resistance to meet industry and safety standards. The material must maintain structural integrity and aesthetic performance under prolonged exposure to harsh environmental conditions typical of outdoor military installations. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, meaning only small businesses are eligible to compete, and it is classified under NAICS code 316110, which covers textile mill products manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of August 25, 2026, at 6:00 PM. Performance of the contract is required at Luke Air Force Base, with a zip code of 85309, indicating the fabric will be installed at a U.S. Department of Defense facility under the 56th Combat Support Group. Although no specific point of contact or office address is provided, the contracting activity is identified as FA4887 56 Cons Cc. The work involves delivering certified fabric that meets technical specifications for long-term outdoor use, ensuring safety, longevity, and compliance with federal and military-grade performance benchmarks, all while adhering to small business procurement objectives.

Leather and Hide Tanning and Finishing

POSTED

DEADLINE

in about 1 month

Material Supply – Metal ComponentsThe contract titled Material Supply – Metal Components is a small business set-aside subcontract issued by the Department of Defense under the FA4887 56 Cons Cc agency, specifically targeting total small business participation as defined by the SBA under FAR 19.5. It seeks the supply of replacement steel or aluminum components including beams, brackets, and fasteners required for the repair of sunshade systems, with performance required at Luke Air Force Base in Arizona, 85309. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 6:00 PM Eastern Time. The North American Industry Classification System code assigned to this procurement is 332311, indicating it falls under the manufacturing of fabricated metal product manufacturing, specifically architectural and structural metals manufacturing. All suppliers must be certified small businesses eligible to compete in a total small business set-aside and are expected to deliver components that meet exacting technical and quality standards suitable for military-grade infrastructure maintenance.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

in about 1 month

Preventive Maintenance and Inspection ServicesThe contract titled Preventive Maintenance and Inspection Services is a small business set-aside subcontract under the North American Industry Classification System code 541690, issued by the Department of Defense through the agency FA4887 56 Cons Cc. It requires the contractor to perform routine inspections, lubrication, bolt tightening, and detailed reporting to ensure structural safety and compliance with a specified performance work statement. All services are to be conducted at Luke Air Force Base in Arizona with the zip code 85309, and the work is tied to maintaining operational readiness and regulatory compliance for critical infrastructure. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 6:00 PM, with the contract reserved exclusively for small businesses as defined under the Small Business Administration’s Total Small Business Set-Aside provisions.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 month

Fabric or Tensile Membrane ReplacementThe contract calls for the inspection, removal, and replacement of worn or damaged fabric membranes used in sunshade canopies at Luke Air Force Base, with a zip code of 85309. This work is classified under NAICS code 238990 and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, by 6:00 PM. The contract is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at the designated location on the base. The scope emphasizes precision in handling tensile membrane systems, requiring qualified contractors to assess damage, safely remove degraded materials, and install new membranes that meet performance and durability standards for outdoor canopy structures.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Coating and Paint Application (Protective)The contract entails the repainting and application of corrosion protection coatings to sunshade structures at Luke Air Force Base, with the primary goal of extending their service life through the use of weather-resistant materials designed to withstand environmental exposure. The work is classified under NAICS code 238220, indicating a specialty trade contractor scope focused on architectural coating and painting services, and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions, ensuring eligibility is limited to firms classified as small by federal standards. All work must comply with technical requirements for surface preparation, coating application, and durability standards specific to military infrastructure, with performance expected to maintain structural integrity and aesthetic quality under harsh operational conditions. This subcontract, posted on July 24, 2026, has a response deadline of August 25, 2026, and is managed by the Department of Defense under the FA4887 56 Cons Cc office. The place of performance is definitively located at Luke Air Force Base with a zip code of 85309, and all contractors must be prepared to meet federal defense specifications for protective coatings, including adherence to environmental, safety, and quality control protocols. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered for award under this competitively set-aside opportunity, with payment, compliance, and delivery terms governed by standard federal subcontracting regulations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Metal Fabrication and Structural RepairThe contract titled Metal Fabrication and Structural Repair pertains to the repair, refurbishment, and replacement of damaged or corroded metal components within sunshade structures at Luke Air Force Base, including frames, supports, and fasteners. The work involves specialized metal fabrication to restore structural integrity and ensure long-term durability of these components, with all activities required to meet military-grade standards for safety and performance. The scope is limited to on-site work at the designated location and demands precision in handling corroded materials while adhering to strict environmental and safety protocols. This is a total small business set-aside under the SBA, specifically designated as a FAR 19.5 set-aside, meaning only businesses certified as small by the SBA are eligible to bid. It falls under NAICS code 332312, which classifies metal fabrication services involving structural metal products. The contract was posted on July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. The contracting activity is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at Luke Air Force Base in Arizona, with zip code 85309. The procurement is structured as a subcontract, suggesting it may be part of a larger project, but bidders must comply fully with all applicable federal and defense contractual requirements.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Systems Testing & Calibration ServicesThe contract seeks qualified small businesses to perform independent testing, calibration, and validation of radar systems, solar performance components, and overall system durability under real-world field conditions. This includes exposing equipment to environmental stressors such as temperature extremes, humidity, vibration, and electromagnetic interference, while ensuring all measurements and calibrations are traceable to NIST standards. The work is critical to verifying the accuracy, reliability, and long-term resilience of defense-related sensor and energy systems deployed in operational environments. Performance is required at Luke Air Force Base with a zip code of 85309, and the opportunity is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 5, 2026, at 10:30 PM Eastern Time. This subcontract is issued under NAICS code 541380, which pertains to other scientific and technical consulting services, and is managed by the Department of Defense through the FA4887 56 Cons Cc office. All testing protocols must adhere strictly to established technical and compliance benchmarks to ensure data integrity and operational readiness.

Testing Laboratories and Services

POSTED

DEADLINE

Trailer Fabrication & Mobility PlatformThe contract calls for the fabrication of rugged, towable trailers that meet DOT compliance standards and are designed for military base operations, with integrated mounting systems to securely support radar equipment, display units, and solar power components. These trailers must be engineered for durability and mobility under demanding field conditions, ensuring reliable deployment and operational readiness at Luke Air Force Base, Arizona. The project emphasizes structural integrity, environmental resilience, and seamless integration of technical systems to support defense-related surveillance and energy needs. This is a small business set-aside subcontract under NAICS code 336213, exclusively open to small business concerns as defined by the SBA. The opportunity was posted on July 24, 2026, with a firm response deadline of August 5, 2026, at 10:30 PM Eastern Time. The contracting activity is managed by the Department of Defense under office FA4887 56 Cons Cc, and performance will be centered at Luke Air Force Base with a zip code of 85309. All submissions must adhere to the requirements for compliance, ruggedization, and system integration without reliance on external documentation beyond the specifications outlined in the solicitation.

Motor Home Manufacturing

POSTED

DEADLINE

Solar Power System & Battery SupplyThe contract requires the supply of complete off-grid solar power systems designed to continuously operate radar and display units at Luke Air Force Base, with a zip code of 85309. These systems must include photovoltaic panels, charge controllers, deep-cycle batteries, and integrated power distribution components capable of ensuring uninterrupted functionality in remote or non-grid-connected environments. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside authority, as defined by FAR 19.5, with the NAICS code 335912 indicating classification under other electrical equipment and component manufacturing. Proposals must be submitted by August 5, 2026, at 10:30 PM Eastern Time, with the contract issued as a subcontract under the Department of Defense’s FA4887 56 Cons Cc office. The system must be engineered for long-term reliability in operational conditions without access to conventional power infrastructure.

Primary Battery Manufacturing

POSTED

DEADLINE

Solar-Powered Radar Speed Trailer Design & IntegrationThe contract seeks the engineering design, integration, and assembly of mobile solar-powered radar speed trailers to be deployed at Luke Air Force Base. The solution must include integrated radar detection systems, real-time speed display mechanisms, advanced power management using solar energy, and robust structural trailer components capable of reliable field operation. The entire system must be self-sufficient, leveraging solar power to ensure continuous functionality without reliance on external electrical inputs, and must be engineered for durability in outdoor, high-traffic environments. All components must be fully integrated and tested to meet operational standards for military installation use. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with NAICS code 336399 indicating it falls under other transportation equipment manufacturing. The opportunity was posted on July 24, 2026, and responses are due by August 5, 2026, at 10:30 PM UTC. The contract is managed by the Department of Defense under FA4887 56 Cons Cc, with performance required exclusively at Luke Air Force Base in Arizona, zip code 85309. The procurement emphasizes innovation in renewable energy application, mobile surveillance technology, and systems integration tailored to the specific needs of a military installation.

All Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Solar-Powered Radar Speed and Message TrailersThe U.S. Department of Defense, through the 56th Contracting Squadron at Luke Air Force Base, Arizona, has issued solicitation FA488726Q0038 for the procurement of solar-powered radar speed and message trailers configured as Stalker Radar MC360 units measuring 4 feet by 8 feet. This effort is designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 334290 indicating the procurement is restricted to small businesses in the Electronic Component Manufacturing sector. The trailers are intended for deployment at Luke AFB to enhance force protection, traffic monitoring, and emergency alerting by integrating radar-based speed detection with dynamic message displays, supporting existing security systems such as Giant Voice and Eagle Eyes. The solicitation specifies that funds are not currently available and no award will be made until appropriation is secured, with the Government retaining the right to cancel the solicitation at any time without incurring liability for offeror costs. The place of performance is clearly defined as Luke Air Force Base, Arizona, 85309, and the deadline for submissions is August 5, 2026. Point of contact for inquiries is Hayley Munnell, with Jacqueline Aranda as the secondary contact. Despite references to attached solicitation materials outlining salient characteristics, no detailed specifications, packaging requirements, evaluation factors, pricing structure, or contract administration details such as payment terms, COR/COTR assignments, or inspection criteria were provided in the available documentation. The contract type is listed as combined, but the specific pricing format, CLIN structure, delivery schedule, FOB terms, and invoicing method remain undefined. Offerors are expected to possess a valid UEI and CAGE code and self-certify as small businesses, but no completed representations or certifications are included in the materials. All substantive details related to technical compliance, quality standards, and delivery logistics appear to be contingent on unprovided attachments.

Other Communications Equipment Manufacturing

POSTED

DEADLINE