LOUDSPEAKER, DRIVER COIL, AND HORN

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5965 25-120-9896 LOUDSPEAKER OEM: DNH A/S DEN NORSKE HOEYTALERFABRIKK A/S DISTRIBUTOR #: HS-8 T, 70 VOLT #321002 (RAL 7031) NOTE: THIS IS FOR THE FRC'S MATERIAL / COLOR: ALUMINUM ALLOY / RAL 7031 TRANSFORMER: 70 VOLT LINE MOUNTING: BRACKET, TERMINATION: SCREW TERMINALS (4) PRIMARY NOMINAL TAPPINGS: RED: YELLOW 8.0W WEIGHT: 1,5 KG IP-RATING (UL EQUIVALENT): 67 MAX / MIN AMB TEMP: 150 DEGREES C / -50 DEGREES C RATED / MAX. POWER: 8 W / 10 W SPL 1W/1M: 103 DB SPL RATED POWER: 111 DB EFFECTIVE FREQ. RANGE: 500 TO 6000 HZ DISPERSION (-6DB) 1KHZ / 4KHZ: 150 DEGREES / 45 DEGREES OVERALL LENGTH 141.0 MILLIMETERS NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 60.0 MILLIMETERS NOMINAL OVERALL DIAMETER 124.0 MILLIMETERS NOMINAL TRANSDUCER TYPE DIAPHRAGM USAGE DESIGN INDOOR AND OUTDOOR PART NAME ASSIGNED BY CONTROLLING AGENCY HS-8T STYLE DESIGNATOR PROJECTOR EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW TYPE III, CLASS I OF MIL-PRF-81705E_AMENDMENT-1 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE, HEAT-SEALABLE; IF REQUIRED. EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE FOLLOWING: MIL-STD-2073-1E W/CHANGE 1 7 JANUARY 2011, METHOD 10 ASTM-D-3951-10 PACKING, COMMERCIAL (IF SPECIFICALLY AUTHORIZED BY THE GOVERNMENT) EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE FOLLOWING: MIL-STD-129P CHANGE 4, SEPT 2007 MARKING FOR SHIPMENT ANDSTORAGE BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH THE FOLLOWING: MIL-STD-129PCH4 MILITARY MARKING. SEE 4.4, PAGE 47 OF THIS SPECIFICATION FOR IDENTIFICATION LINEAR (CODE 39) AND 2D (PDF417) BAR CODE MARKINGS AND LOCATIONS. MFG NAME: DNH A/S DEN NORSKE HOEYTALERFABRIKK PART_NBR: P-DNH-HS8T Quantity: TEN (10)) each Item: 2 NSN: 5965 25-150-1409 DRIVER COIL LOUDSPEAKER DRIVER COIL OEM: DNH A/S DEN NORSKE HOEYTALERFABRIKKA/S P/N: DST100 (100W, 70 VOLT) OR DST-100 NOTE: THIS IS FOR THE FRC'S EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW TYPE III, CLASS I OF MIL-PRF- 81705E_AMENDMENT-1 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE, HEAT-SEALABLE; IF REQUIRED. EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE FOLLOWING: MIL-STD-2073-1E W/CHANGE 1 7 JANUARY 2011, METHOD 10 ASTM-D-3951-10 PACKING, COMMERCIAL (IF SPECIFICALLY AUTHORIZED BY THE GOVERNMENT) EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE FOLLOWING: MIL-STD-129P CHANGE 4, SEPT 2007 MARKING FOR SHIPMENT AND STORAGE BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH THE FOLLOWING: MIL-STD-129PCH4 MILITARY MARKING. SEE 4.4, PAGE 47 OF THIS SPECIFICATION FOR IDENTIFICATION LINEAR (CODE 39) AND 2D (PDF417) BAR CODE MARKINGS AND LOCATIONS. MFG NAME: DNH A/S DEN NORSKE HOEYTALERFABRIKK PART_NBR: DST100 Quantity: TEN (10) each Item: 3 NSN: 5965 25-161-1945 LOUDSPEAKER, ELECTROMAGNETIC OEM: DNH A/S DEN NORSKE HOEYTALERFABRIKK A/S DISTRIBUTOR ITEM # H-66 FHT 70 V CUSTOM RAL 7031 # 325503 THIS IS FOR THE FRC'S MATERIAL / COLOUR: ALUMINIUM ALLOY (LM-6) / CUSTOM COLOR: RAL 7031 MOUNTING: BRACKET TERMINATION: INTERNAL SCREW TERMINALS, SECONDARY NOMINAL TAPPINGS: 1 : 4 50 W WEIGHT: 3.7 KG IP-RATING: 67 MAX. / MIN. AMB. TEMP: 150 DEGREES C / -50 DEGREES C STANDARD VERSION: 100 V TRANSFORMER RATED / MAX. POWER: 50 W / 80 W SPL 1W/1M: 109 DB SPL RATED POWER: 125 DB EFFECTIVE FREQ. RANGE: 300 TO 7000 HZ DISPERSION (-6DB) 1KHZ / 4KHZ: 115 DEGREES / 30 DEGREES DIRECTIVITY FACTOR, Q EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW TYPE III, CLASS I OF MIL-PRF 81705E_AMENDMENT-1 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE, HEAT-SEALABLE; IF REQUIRED. EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE FOLLOWING: MIL-STD-2073-1E W/CHANGE 1 7 JANUARY 2011, METHOD 10 ASTM-D-3951-10 PACKING, COMMERCIAL (IF SPECIFICALLY AUTHORIZED BY THE GOVERNMENT) EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE FOLLOWING: MIL-STD-129P CHANGE 4, SEPT 2007 MARKING FOR SHIPMENT AND STORAGE BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH THE FOLLOWING: MIL-STD-129PCH4 MILITARY MARKING. SEE 4.4, PAGE 47 OF THIS SPECIFICATION FOR IDENTIFICATION LINEAR (CODE 39) AND 2D (PDF417) BAR CODE MARKINGS AND LOCATIONS. MFG NAME: DNH A/S DEN NORSKE HOEYTALERFABRIKK PART_NBR: P-DNH-66FHT Quantity: TWENTY (20) each Item: 4 NSN: 5965 25-150-0862 HORN, LOUDSPEAKER AVAILABLE VIA SOLE SOURCE CONUS DISTRIBUTOR: DNH SPEAKERS INC. DISTRIBUTOR ITEM # DH-50 THIS IS FOR THE FRC'S EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW TYPE III, CLASS I OF MIL-PRF81705E_ AMENDMENT-1 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE, HEAT-SEALABLE; IF REQUIRED. EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE FOLLOWING: MIL-STD-2073-1E W/CHANGE 1 7 JANUARY 2011, METHOD 10 ASTM-D-3951-10 PACKING, COMMERCIAL (IF SPECIFICALLY AUTHORIZED BY THE GOVERNMENT) EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE FOLLOWING: MIL-STD-129P CHANGE 4, SEPT 2007 MARKING FOR SHIPMENT AND STORAGE BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH THE FOLLOWING: MIL-STD-129PCH4 MILITARY MARKING. SEE 4.4, PAGE 47 OF THIS SPECIFICATION FOR IDENTIFICATION LINEAR (CODE 39) AND 2D (PDF417) BAR CODE MARKINGS AND LOCATIONS. MFG NAME: DNH A/S DEN NORSKE HOEYTALERFABRIKK PART_NBR: DH-50 Quantity: TEN (10) each The items are used on various US Coast Guard vessels. All items will be individually packaged and bar-coded in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Substitute parts are not acceptable. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Government's belief that only DNH SPEAKERS, INC. (OEM) and/or their authorized distributors can obtain the required OEM parts. Concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (2) calendar days from the day this notice is posted. The data must include sufficient detail to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor, and verifying the OEM will supply genuine OEM parts Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg 88. Required delivery date no later than: MARCH 31, 2017 OR AS SOON AS POSSIBLE This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-93 (01 Jan 17) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 334290 and the business size standard is 750. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award on a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is MARCH 20, 2017, at 1:00 PM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (June 2016); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (June 2016) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (June 2016). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)52.212-5 are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644), FAR 52.219-28, Post Award Small Business Program representation (Jul 2013)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf