Marco TRS-6100 RT Digital Refractors / Part Number: RT-6100-M (Brand Name or Equal)

Combined Synopsis/Solicitation IAW FAR Subpart 12.6 Marco TRS-6100 RT Digital Refractors / Part Number: RT-6100-M (Brand Name or Equal) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. 1. The solicitation number W81K00-23-R-0030 and is issued as a Request for Quotation (RFQ). 2. The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01 and Defense Federal Acquisition Regulation Supplement Publication Notice (DPN) 20230131. 3. This acquisition is conducted as 100% Small Business Set-Aside. The North American Industrial Classification System (NAICS) Code that best fits this requirement is 339115, Ophthalmic Goods Manufacturing. The NAICS code selected best fits FSC 6540 - Ophthalmic Instruments, Equipment, and Supplies. Small Business Size Standard: 1,000 number of employees. All eligible businesses may submit an offer, which will be considered. 4. The Government intends to make award based on the initial quote submissions without conducting interchanges. Therefore, each quote should contain the quoter's best terms from a price and technical standpoint. However, the Government reserves the right to hold interchanges if, during the evaluation, it is determined to be in the best interest of the Government, IAW FAR 52.212-1(g). Interchanges are fluid interaction(s) between the Contracting Officer (CO) and the contractors that may address any aspect of the quote and may or may not be documented in real time. However, the Government reserves the right to conduct interchanges using Interchange Notices (IN). Vendor responses to the INs will be considered in making the order selection decision. Interchanges may be conducted with one, some or all offerors as the Government is not required to conduct interchanges with any or all vendors responding to this solicitation. 5. See the attached solicitation Schedule of Supplies (Reference Atch 3) for applicable contract line items (CLINS), quantities and units of measures. 6. Commercial Supply: This requirement requires Marco TRS-6100 RT Digital Refractors / Part Number: RT-6100-M (Brand Name or Equal) in support for the Optometry Department at the Reynolds Army Health Clinic, Fort Sill, Oklahoma. See the Salient Characteristics as attached (Reference Atch 4). Delivery Schedule: 90 Days After Receipt of Order (ARO) 7. The provision at 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition. ADDENDUM TO FAR 52.212-1 QUOTATION PREPARATION INSTRUCTIONS (a) To assure timely and equitable evaluation of quotations, quoters must follow the instructions contained herein. Quoters are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in an offer being ineligible for award. Quoters must clearly identify an exception to the solicitation terms and conditions and provide complete accompanying rationale. (b) Submission of quotes. Submit quotes, to include all fill-in clauses to the office specified in this solicitation at or before the exact time specified in this solicitation. (c) Address any questions, clarifications or concerns you may have via email to: J. Chris Finkenstadt, contact@example.gov and Albert A. Lee, contact@example.gov . (d) Exceptions taken to terms and conditions of the RFQ, to any of its attachments, or to other parts of the RFQ shall be identified. Provide rational in support of the exception and fully explain its impact, if any, on the performance, schedule, cost and specific requirements of the RFQ. Failure to comply with the terms and conditions of the RFQ may result in the quoter being removed from consideration for award. 8. The provision at 52.212-2, Evaluation - Commercial Items, applies to this acquisition. ADDENDUM TO FAR 52.212-2 EVALUATION PROCEDURES Reference FAR 52.212-2, paragraph (a) is hereby tailored as follows: (a) Best value determination will be based on a Lowest Price Technically Acceptable approach. The Government will award a single contract resulting from this RFQ to the responsible quoter whose services are technically acceptable and quotes the lowest overall price. The following factors shall be used to evaluate quotes: (i) Technical (ii) Price If five (5) or fewer quotes are received, the Government will evaluate all quotes for technical acceptability. If more than five (5) quotes are received, the Government will then evaluate the five (5) lowest priced quotes for Technical Acceptability. However, the Government reserves the right to evaluate additional quotes for technical acceptability if deemed to be in the Government's best interest. If additional quotes are evaluated for technical acceptability, they will be evaluated in the order of increasing total evaluated price, when the agency determines that none of the initial five (5) lowest priced quotes are qualified as acceptable. The agency will reject and not consider for award any quote found technically unacceptable and ineligible for award under the terms of this RFQ, in the absence of interchanges. The evaluation process shall proceed as follows: 1. Technical: (See attached Combined Synopsis/Solicitation) The Government will evaluate the quoter's capabilities to provide the Digital Refractor's as stated in the RFQ. The supplies recommended by the quoter will be evaluated in how they satisfy all of the Salient Characteristics provided in the RFQ instructions. The characteristics will be rated as either 'acceptable' or 'unacceptable' and any characteristics receiving an 'unacceptable' will make the quoter ineligible for award. Any quote submitted with more than 20 pages will result in an unacceptable rating. Failure to address EACH salient characteristic in sufficient detail with an unambiguous response will result in an unacceptable rating. 2. Price: (See attached Combined Synopsis/Solicitation) The Government will evaluate quotes for award purposes by overall total price. Quoters are required to accurately complete the Schedule of Supplies (Reference Atch 3). Incomplete Schedule of Supplies or quotes could indicate lack of understanding of the requirement and may result in the entire quote being determined unacceptable or eliminated from further consideration. Price will not be scored or rated. The Government will evaluate quoters for award purposes by adding the total price for all options to the total price for the basic requirement. For evaluation purposes, the Total Evaluated Price (TEP) is the sum of all CLINs combined. The TEP will be evaluated for fair and reasonableness. Fair and reasonableness: A price is fair and reasonable if, in its nature and amount, does not exceed that which would be incurred by a prudent person in the conduct of competitive business. The Government will use any of the procedures of FAR 13.106-3(a) to make a fair and reasonable determination on TEP. Pricing will be reviewed to determine reasonableness based on market research. A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a purchase order without further action by either party. Before the quoter's specified expiration time, the Government may accept a quote (or part of an quote), whether or not there are interchanges after its receipt, unless a written notice of withdrawal is received before award. Note: The government intends to award without interchanges. The government reserves the right to enter into interchanges, if deemed necessary by the Contracting Officer, to include price clarifications. 9. Quoter(s) is (are) required to include a completed copy of the provisions at 52.212-3, Offeror Representations and Certifications - Commercial Items, with their quote. A quoter shall complete only paragraph (b) of this provision if the contractor has completed the annual representations and certifications electronically via http://www.sam.gov. If a quoter has not completed the annual representations and certifications electronically at the SAM website, the contractor shall complete only paragraphs (c) through (o) of this provision. 10. The Government will award a single contract resulting from this RFQ to the responsible quoter whose supplies are technically acceptable and quotes the lowest overall price. 11. The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition and also Addendum to FAR 52.212-4. 12. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (Deviation), all FAR clauses cited in the clause are applicable to the acquisition. 13. Additional contract requirement(s) or terms and conditions: See attached. 14. Defense Priorities and Allocations System (DPAS) and assigned rating: N/A 15. Independent consultation with Government Officials concerning the project requirements is prohibited since evaluation of quotations will be based on requirements stated in the Request for Quotation. Industry Generated Questions regarding the design, coordination, or interpretation of RFQ requirements during the solicitation phase shall be in writing and directed to the Contract Specialist, Mr. J. Chris Finkenstadt, at contact@example.gov, with a courtesy copy to Mr. Albert A. Lee at contact@example.gov no later than 26 June 2023 at 1:00 P.M. (CST). Questions submitted after the question due date will not be accepted. 16. Complete quotation is due NLT 11:00AM CST on 06 July 2023. Deliver to U.S. Army Health Contracting Activity/ Medical Readiness Contracting Office - West electronically, ATTN: J. Chris Finkenstadt, contact@example.gov and Mr. Albert A. Lee, contact@example.gov . It is each contractor's responsibility to ensure their quote and all data is complete and IAW the RFQ. The government assumes no responsibility for late or incomplete responses to the RFQ. Late responses will be processed IAW FAR 52.212-1(f). 17. POC: J. Chris Finkenstadt, contact@example.gov, and Mr. Albert A. Lee, contact@example.gov . 18. NOTICE TO QUOTERS: The Government reserves the right to cancel this RFQ either before or after the closing date. In the event the Government cancels this RFQ, the Government has no obligation to reimburse any offeror for any costs. 4 Attachments: (Attached within Combine Synopsis/Solicitation) 1. Applicable Clauses and Provisions 2. Additional Information 3. Schedule of Supplies 4. Salient Characteristics