This Solicitation opportunity from Minnesota was posted on July 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mazatrol Manufacturing Equipment

Closed

MnSCU-SRC-MNC-2026-000604-SingleState & Local

Submission Closed07/16/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333517

New

Federal

Dieless Robotic Sheet Metal Forming System Integration

POSTED

DEADLINE

CNC Abrasive Waterjet - Amendment 0001

Solicitation # 47QACA26Q0394

The General Services Administration, on behalf of the Department of the Air Force Air Force Life Cycle Management Center at Robins AFB, GA, is soliciting firm-fixed-price quotations for the acquisition of six CNC abrasive waterjet machining centers. These automated manufacturing machines will be deployed across six distinct global locations, including both CONUS and OCONUS sites. This procurement is being conducted as an unrestricted solicitation under FAR Part 12 for commercial products and FAR Part 13 for simplified acquisition procedures, covering the equipment, freight, rigging, and delivery. Amendment 0001 was issued to update the RFQ package, incorporate government responses to vendor questions, and clarify the pricing structure and schedule of supplies. The solicitation is categorized under NAICS code 333517. Quotations must be submitted no later than September 4, 2026, at 2:00 PM Eastern Time. The primary point of contact for this requirement is Melissa Martel within the Office of Centralized Acquisition Services.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

Engine Lathe - Amendment 0001 with attachments

Solicitation # 47QACA26Q0392

The United States Air Force Life Cycle Material Command is seeking engine lathes through a firm-fixed price supply contract issued under simplified acquisition procedures for commercial products, with the requirement fully set aside for small businesses. The lathes must meet specific salient characteristics outlined in Attachment 1 of the RFQ and are intended to enable precise shaping, cutting, and finishing of metal and other rigid materials to support critical maintenance and production missions. The solicitation, identified by number 47QACA26Q0392, was posted on August 7, 2026, with responses due by August 24, 2026, and is managed by the Office of Centralized Acquisition Services under the General Services Administration. The NAICS code for this procurement is 333517, indicating the focus on industrial machinery manufacturing. All submissions must consist exclusively of engine lathes, and vendors must be certified small businesses to qualify. The point of contact for inquiries is Melissa Martel, reachable via email or phone, with the office located in Washington, D.C. The place of performance has not been specified, and all award decisions will be made based on technical compliance and firm-fixed pricing.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

34--SOURCES SOUGHT NOTICE MILLING MACHING

Solicitation # DOIRFBO260015

The Department of the Interior, through the Great Plains Regional Office based in Billings, Montana, has issued a sources sought notice for milling machining services under solicitation number DOIRFBO260015. This special notice is categorized under NAICS code 333517 and is intended to identify potential vendors capable of providing the required machining capabilities. Interested parties must submit their responses by the deadline of September 3, 2026. The primary point of contact for this requirement is Rhonda Ligon, who can be reached via email or phone for further inquiries regarding the procurement process.

Great Plains Regional Office

POSTED

DEADLINE

Solicitation # W50S9C26QA020

The Vermont Air National Guard is seeking quotes for a Firm Fixed Price contract to acquire three mobile laser cleaners under solicitation W50S9C-26-Q-A020. These units will be used to remove paint and light corrosion from airfield ground equipment as a safer alternative to sanding hex chromate primer. This requirement is 100% set aside for small businesses under NAICS code 333517. The required equipment must feature a pulsed fiber laser source, operate on 110V power with a 200-300W output, and include an ergonomic handheld applicator. Each unit must weigh less than 100 lbs and be housed in a ruggedized, wheeled transportation case for mobility. Interested vendors must submit written quotes to the designated contracting officers by September 8, 2026, including proposed delivery and payment terms.

W7N4 Uspfo Activity Vtang 158

POSTED

DEADLINE

55 MXS Toolroom Lathe

Solicitation # FA460026Q0081

Solicitation FA460026Q0081 is a request for quotes for the procurement of one precision toolroom lathe and associated installation services for the Aircraft Metals Technology section at Offutt Air Force Base, Nebraska. This acquisition is a total set-aside for small businesses and women-owned small businesses under NAICS 333517. The primary objective is to restore in-shop machining capabilities to support the maintenance of aircraft and ground support equipment. The contract is divided into two CLINs, with CLIN 0001 covering the lathe and CLIN 0002 covering the installation services, both of which must be delivered or completed within 60 calendar days of the award receipt. Quotes are due by September 2, 2026, at 12:00 PM CDT. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on a technical evaluation of the Statement of Need plan, installation plan, and equipment specifications, as well as the Total Evaluated Price. Offerors must be registered in the System for Award Management and submit their quotes electronically. Payment will be processed through the Wide Area WorkFlow system. Performance requires contractor installation and operational verification at the destination, with specific security requirements for base access and facility entry.

POSTED

DEADLINE

Abrasive Waterjet System 126ARW Scott AFB

Solicitation # W50S7S26Q0027

The 126th Air Refueling Wing is seeking quotes for a turnkey Abrasive Waterjet System, including installation and training. The requirement specifies a system capable of accommodating materials up to 5 by 5 feet, a cutting speed of approximately 500 IPM, and a maximum height of 11 inches. The vendor must provide a list of power and input requirements, complete the equipment hookup on the day of installation, and train two personnel on machine operation before final payment is issued. While the MAXIEM 1515 is listed as an example, this is not a brand-name restricted requirement. This is a small business set-aside under NAICS 333517. Award will be based on a best-value evaluation considering technical capability, past performance, and price. Notably, funds are not currently available, and no contract award will be made until appropriated funds are secured from executive ANG agencies. Quotes must be submitted electronically by the deadline, including pricing sheets, technical literature, and country of origin certifications.

W7M6 Uspfo Activity Ilang 126

POSTED

DEADLINE

Robotic Sheet Metal Forming CAPABILITY REQUEST FOR INFORMATION

Solicitation # FA8684AMPOAR01

The United States Air Force Rapid Sustainment Office is issuing a Capability Request for Information under solicitation FA8684AMPOAR01 to identify on-demand, dieless robotic sheet metal forming solutions. The goal is to find commercial off-the-shelf or adaptable technologies that use synchronized robotic arm manipulators to produce structural components and spare parts. This initiative aims to replace traditional, expensive hard tooling and long lead-time manufacturing processes with a flexible, software-defined alternative suitable for depot, maintenance, or factory-level facilities. This notice is for market research and planning purposes only and does not constitute a formal request for proposal or a commitment to contract. Interested parties are encouraged to provide details on hardware and software integration, as well as optional services like operator training and system maintenance. Responses must be submitted by October 27, 2026, to the Department of Defense office located at Wright Patterson Air Force Base in Ohio.

POSTED

DEADLINE

Supply and Integration of Multi-Tool Cutting Plotter Machine

Georgia Institute of Technology

POSTED

DEADLINE

Multi Tool Cutting Plotter Machine

Solicitation # PE-50300-RFI-2027-000000334

The Georgia Institute of Technology, acting on behalf of the Board of Regents of the University System of Georgia, has issued a Request for Information for a large format cutting plotter machine to be used by the Printer and Copying Services department. The required equipment must feature a multi tool head capable of holding at least four tools and must be compatible with the Mimaki JFK200-2513 flatbed printer. This solicitation, identified as PE-50300-RFI-2027-000000334, was posted on August 26, 2026, with a response deadline of September 10, 2026. Interested parties should direct technical inquiries to JAGGAER supplier support and purchasing questions to the Georgia Institute of Technology Procurement and Business Services. Millandra Cochran serves as the primary point of contact for this request.

Georgia Institute of Technology

POSTED

DEADLINE

Laser Engraver Equipment Supply, Installation, and TrainingThe Department of Defense, through the W7NG Uspfo Activity Mn Arng, is seeking a subcontractor for the supply, delivery, installation, and training of a commercial off-the-shelf laser engraver system. The required equipment must be capable of engraving a variety of materials, including metal, plastic, rubber, glass, and wood. The selected provider will be responsible for delivering the system to Camp Ripley in Little Falls, Minnesota, performing the initial setup, and conducting on-site training. This opportunity is designated as a total Small Business Set Aside under NAICS code 333517. The solicitation was posted on August 26, 2026, with a response deadline of September 8, 2026, at 4:00 PM.

W7NG Uspfo Activity Mn Arng

POSTED

DEADLINE

Flow Mach 500 Waterjet System Supply and Trade-In

NASA Shared Services Center

POSTED

3 days ago

DEADLINE

in 5 days

AI Contract Overview

Minnesota State Colleges and Universities System, through Minnesota North College, is seeking to procure a Mazak CNC milling machine with the proprietary Mazatrol control system from Northwest Machine Technologies under a single-source procurement process. The Mazatrol control system, developed exclusively by Mazak, is essential to the curriculum of the new Manufacturing Technology program and cannot be replicated by any other manufacturer or vendor, making Northwest Machine Technologies the sole provider capable of delivering the qualified equipment along with authorized installation, startup, warranty support, and factory-certified service in the region. The purchase is justified due to the unique technical requirements of the program, which demand hands-on student training using industry-standard Mazatrol technology that is unavailable through any alternative source. The solicitation, identified as MnSCU-SRC-MNC-2026-000604-Single, was posted on July 3, 2026, with responses due by July 16, 2026, and is managed by Natasha Orhn of Minnesota North College, with no set-aside or NAICS code designated.

General Info

Minnesota North College sole-sources Mazak CNC with Mazatrol control for Manufacturing Technology program training.

Agency

Minnesota State Colleges and Universities SystemView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SRC-MNC-2026-000604-Single Source Procurement for Mazatrol Manufacturing Equipment

PDF•single-source

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 3

Solicitation

Response DeadlineJul 16

Deadline has passed

Submission Closed

07/16/2026, 09:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMinnesota State Colleges and Universities System

Contacts1 person available

OfficeN/A

Organization / Agency

Minnesota State Colleges and Universities System

View Agency Profile

Office AddressN/A

Contacts

Natasha Orhn

contact@example.gov

Full Description

Minnesota State intends to enter into an agreement with Northwest Machine Technologies for the purchase of a Mazak CNC Milling Machine equipped with the proprietary Mazatrol control system for Minnesota North College's new Manufacturing Technology program. Mazatrol is a proprietary conversational programming control developed exclusively by Mazak and is not available from any other CNC machine manufacturer. Northwest Machine Technologies is the authorized regional distributor and service provider for Mazak equipment and is the only vendor authorized to provide the required equipment, installation, startup, warranty support, and factory-certified service within the region. This purchase has been deemed a single source because no other vendor can provide a genuine Mazak CNC machine equipped with the Mazatrol control system along with the required manufacturer-authorized sales, installation, warranty, and support services. The equipment is required to meet the instructional objectives of the Manufacturing Technology program and to provide students with hands-on experience using industry-standard Mazatrol technology.