This Government Contract opportunity from Government of Canada was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mechanical Systems Commissioning

Closed

International

Submission Closed06/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

SLED

Construction Management Services IDIQThe Port of Seattle is seeking Construction Management services through an Indefinite-Delivery, Indefinite-Quantity contract to support the planning, design, construction, and closeout phases of its major construction projects. This includes working on projects delivered via Design Build, Progressive Design Build, and other alternative delivery methods, ensuring adherence to authorized schedules, budgets, and quality standards. The scope encompasses comprehensive CM services tailored to the evolving needs of Port infrastructure initiatives, with the contractor expected to provide expert oversight and coordination throughout all project lifecycles. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The solicitation is posted under NAICS code 541330, which classifies the services as architectural, engineering, and related services. The contract is forecasted for release in July 2026, and all performance will occur at locations associated with Port of Seattle facilities, though specific sites have not been defined at this stage. Potential vendors should prepare to respond to future solicitations through the Port’s official procurement portal.

Construction Management

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks qualified providers to perform independent inspection of battery shipments to ensure full compliance with packaging, labeling, and defect-free standards, utilizing either MIL-STD-1916 or ASQ H1331 sampling methodologies. Inspections must verify that all batteries meet rigorous military and quality assurance criteria before release or delivery, with inspection results documenting conformity and identifying nonconformances. The work is intended as a subcontract and falls under the NAICS code 541330 for scientific and technical consulting services, positioning the provider as a technical partner in maintaining supply chain integrity. The solicitation is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a deadline for responses set for August 6, 2026. The contract does not specify a set-aside status and leaves the place of performance and contact details unspecified, indicating that the inspection services may be performed at various shipping or storage locations as required. Interested parties must submit proposals through the designated DIBBS platform prior to the deadline to be considered for award, with the expectation that technical expertise in sampling standards and battery handling will be critical to successful performance.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Sanitary Sewer Evaluation StudyThe City of Bristol Water and Sewer Department is issuing a request for qualifications to engage an engineering firm to conduct a Sanitary Sewer Evaluation Study across three specific areas of its sanitary sewer collection system. The solicitation, identified as 2P27-005, was posted on July 18, 2026, and responses are due by August 7, 2026, at 5:00 PM. The study aims to assess the condition, capacity, and performance of the sewer infrastructure in the designated zones to support future planning and maintenance efforts. Interested firms must submit their qualifications through the City’s official bid platform at BidNet Direct, as no paper submissions will be accepted. The project is administered by the Connecticut Department of Administrative Services, with Nancy Haynes serving as the primary point of contact for inquiries, reachable via email or phone. All work under this contract will be performed within the state of Connecticut, and no set-aside provisions are specified for this solicitation.

POSTED

DEADLINE

Technical Documentation and ManualsThe contract entails the development of comprehensive technical documentation for a packaged substation system, including operation and maintenance manuals, test reports, single-line diagrams, and as-built drawings. These deliverables are essential for ensuring safe, efficient, and compliant operation of the substation infrastructure, providing detailed guidance for ongoing maintenance and system upgrades. The work must be completed to meet industry standards and align with the operational needs of the Public Utility District No. 1 of Lewis County in Washington. Bids must be submitted by August 19, 2026, at 9:00 PM EDT, under a subcontract classification with a NAICS code of 541330, which corresponds to engineering services. The solicitation was posted on July 17, 2026, and all proposals should be submitted through the designated public procurement portal. There is no set-aside designation specified, and performance is expected to support the utility district’s infrastructure in Lewis County, Washington, with no alternative location indicated.

Public Utility District No. 1 of Lewis County

POSTED

DEADLINE

Building Commissioning and TestingThe contract outlines the commissioning and testing of HVAC systems within a building project under the City of Dallas, requiring comprehensive functional performance evaluations including airflow balancing, refrigerant charge verification, and validation of system operations against design intent. All testing must be documented to demonstrate compliance with LEED certification requirements or applicable energy efficiency standards, ensuring the building meets targeted sustainability and performance benchmarks. The work is structured as a subcontract with a NAICS code of 541330, indicating professional, scientific, and technical services related to engineering and testing. The solicitation was posted on July 17, 2026, with responses due by August 7, 2026, and no set-aside provisions are specified. While detailed agency contact information and specific performance location details are not provided, the work is expected to be performed in coordination with the City of Dallas, Texas, and all deliverables must align with the regulatory and environmental goals tied to energy compliance. The opportunity is accessible via an online portal, and potential bidders must ensure their methodologies, documentation, and testing procedures meet the rigorous standards required for certification and verification purposes.

POSTED

DEADLINE

REQUEST FOR PROPOSALS (RFP) FOR ARCHITECTURE AND ENGINEERING SERVICES FOR TWO (2) AQUATIC CENTERSThe City of Dallas is seeking qualified architectural and engineering firms to deliver professional services for the design and development of two separate aquatic center facilities: the Singing Hills Aquatic Center and the Jaycee Zaragoza Aquatic Center. Each project will be awarded under an individual contract, ensuring distinct project management and performance requirements. Proposals must be submitted in response to two solicitation numbers, PKR-2026-00030846 and PKR-2026-00030847, with a deadline for submissions set for August 7, 2026, at 6:00 PM Central Time. All work will be performed within the state of Texas, specifically at the respective facility locations in Dallas. The solicitation was posted on July 17, 2026, and interested firms are directed to the official city procurement portal for detailed requirements and submission guidelines. Kamil Miskowiec serves as the primary point of contact for inquiries regarding the procurement process and can be reached via email.

POSTED

DEADLINE

Acoustical Engineering & Design for Noise Insulation UpgradesThis contract requires the design of custom noise insulation solutions for residential buildings, focusing on windows, doors, wall treatments, and HVAC silencing systems to achieve compliance with FAA Supplemental Type Certificate standards. The scope emphasizes engineering precision to reduce airborne and structure-borne noise in residential environments, ensuring solutions meet rigorous aviation-certified acoustic performance thresholds. All work must be tailored to residential applications while maintaining structural integrity and functional usability. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within architectural and engineering services. It was posted on July 17, 2026, with a response deadline of August 13, 2026, and is managed by Procurement Services under the California agency. While specific location details for performance or contact information are not provided, the procurement is hosted through a public procurement platform, suggesting an open bidding process for qualified engineering firms with expertise in acoustical design and FAA-compliant system integration.

POSTED

DEADLINE

Specialty Inspection and Compliance VerificationA third-party inspection contract has been issued to verify the structural integrity, proper anchoring, and full compliance with Florida pool safety codes and local municipal standards for recreational water facilities. This subcontract is scoped to ensure all inspected pools and related infrastructure meet state-mandated safety requirements and are securely installed according to certified engineering practices. The inspection process will include on-site evaluations, documentation review, and formal reporting to confirm adherence to regulatory benchmarks established by Florida and applicable city authorities. The contract, titled Specialty Inspection and Compliance Verification, falls under NAICS code 541330 for architectural and engineering services and is managed by the Florida Parks and Recreation agency. It was posted on July 17, 2026, with a response deadline of August 18, 2026, allowing qualified inspectors or firms to submit proposals. The place of performance spans locations under Florida’s jurisdiction, though specific cities are not listed, and all work must be conducted in alignment with state and local safety regulations. This contract is not subject to set-aside classifications and is accessible through the procurement portal linked in the solicitation.

POSTED

DEADLINE

Structured Parking & Shared Parking DesignThe contract entails the design of a structured parking facility to accommodate over 265 transit users and an additional 182 spaces designated for a library and community center, with a focus on integrated shared parking strategies to optimize space utilization and operational efficiency. The scope includes conducting a comprehensive shared parking analysis to evaluate demand patterns, peak usage times, and synergies between transit ridership and community center visitors, ensuring the design supports seamless operational integration and minimizes redundant infrastructure. The project is categorized under NAICS code 541330 for architectural and engineering services and is structured as a subcontract solicitation with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, and performance is expected to align with local planning and transportation goals, though specific location details are not provided. The solicitation is publicly accessible via the OpenGov procurement portal, indicating transparency and a competitive bidding process aimed at selecting qualified design professionals to deliver a functional, scalable, and user-centric parking solution.

POSTED

DEADLINE

On-Site & Off-Site Roadway and Traffic EngineeringThe contract pertains to the design of access roads, dedicated turn lanes, and traffic signal modifications aimed at enhancing multimodal traffic flows at a transit center. The scope of work focuses on engineering solutions that improve connectivity and efficiency for vehicles, pedestrians, and transit users, ensuring smoother and safer movement around the facility. All design efforts are intended to support integrated transportation networks and accommodate growing demand in a multimodal environment. This is a subcontract under the NAICS code 541330 for architectural and engineering services, posted on July 17, 2026, with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, though specific location details such as city or zip code are not provided. The project is managed through the Nashville procurement portal, and bidders must submit proposals by the stated deadline to be considered. While the agency organization and point of contact are unspecified, the performance location is tied to the transit center requiring these roadway and traffic enhancements.

POSTED

DEADLINE

Antioch Transit Center Design RFQThe Antioch Transit Center will be constructed on the former Global Mall site at 5252 Hickory Hollow Parkway, strategically located north of Bell Road and east of I-24, to serve as a multimodal transportation hub anchored by high-frequency Bus Route 55 connecting the Hickory Hollow area to Downtown Nashville. The facility is a foundational element of the adopted Global Mall Area Master Plan, which aims to transform the underutilized retail property into a vibrant, mixed-use district featuring cultural amenities, mixed-income housing, and retail spaces. The transit center will include 11 bus bays to accommodate current and future routes including the planned Crosstown Connector and Express services, structured parking with a minimum of 265 transit spaces and 182 additional spaces for the adjacent library and community center, approximately 4,000 square feet of passenger and employee amenities, and up to 19,000 square feet of ground-floor retail shell space. The design must integrate seamlessly with the surrounding community infrastructure, which includes Nashville State Community College’s satellite campus, the Ford Ice Center, the Southeast Branch of the Nashville Public Library, and the Metro Parks Southeast Regional Community Center, whose existing parking lot currently functions as a park and ride and WeGo Link transfer point. In addition to the transit center itself, the project requires comprehensive design services for on- and off-site roadway and traffic signal improvements to support increased multimodal traffic flows. These include new onsite access roads, dedicated turn lanes, and modifications to traffic signals, as outlined in supporting operational analyses and concept diagrams. The Consultant must align all design work with the 2024 Global Mall Area Master Plan and Specific Plan zoning BL2024-448, as well as incorporate findings from prior WeGo studies related to parking, transit operations, and future residential development potential atop the structure. The project has already completed its NEPA environmental review, relieving the Consultant of further environmental documentation responsibilities. Project management will be led by WeGo with oversight from the Capital Program Management Consultant, and the final design must prioritize rider experience, safety, accessibility, operational efficiency, and long-term economic vitality while accommodating future joint development opportunities with private partners. The solicitation closes on August 25, 2026, and responses are expected from architecture, landscape architecture, and engineering firms prepared to deliver a cohesive, forward-looking transit infrastructure aligned with Nashville’s broader mobility goals.

POSTED

DEADLINE

Uniform Quality Inspection and Compliance TestingThe contract titled Uniform Quality Inspection and Compliance Testing requires a third-party provider to conduct thorough inspections of uniforms to ensure material quality, stitching integrity, and full adherence to NFPA standards and procurement specifications. The inspection process will verify that all uniforms meet established safety and durability requirements critical for emergency medical personnel, with particular attention to compliance with federal and internal procurement guidelines. This subcontract is issued by the Emergency Medical Services agency in New York and is open for response until August 13, 2026, with a NAICS code of 541330 indicating it falls under the category of professional, scientific, and technical services related to testing laboratories. The inspection work will be performed regardless of specific location, as no place of performance has been designated, allowing flexibility for the contractor to conduct evaluations across supply chains or distribution centers as needed. The project is not designated for any specific set-aside and is open to eligible third-party inspection firms capable of delivering accurate, reliable, and documented compliance results. All findings must be meticulously recorded and submitted to confirm that every uniform batch meets mandatory safety and quality benchmarks prior to delivery to emergency responders. The contract is accessible through a public procurement portal, and interested parties must submit proposals by the specified deadline to be considered for award.

Emergency Medical Services

POSTED

1 day ago

DEADLINE

in 26 days

AI Contract Overview

The contract pertains to mechanical systems commissioning for HVAC systems within a government facility in Canada, requiring comprehensive performance testing and verification to ensure optimal operational efficiency. This includes air and water balancing, verification of ductwork integrity to prevent leaks or airflow deficiencies, and validation of heat recovery units to confirm energy efficiency and proper function. The work is critical to meeting building performance standards and must be executed with precision to support sustainable operations and occupant comfort. The solicitation is structured as a subcontract under NAICS code 541330 for architectural and engineering services, posted by the National Research Council of Canada on behalf of the Government of Canada. Bidders must submit responses by June 30, 2026, with all work expected to be performed across Canada. While no specific location or point of contact is provided within the data, the contractual obligations center around technical compliance, documented verification of system performance, and adherence to industry best practices for mechanical systems commissioning in public infrastructure projects.