Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Device Supply – Lifepak CR2 4G Defibrillators

Active

Federal

Response Deadline08/12/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of twelve new Lifepak CR2 4G semi-automatic defibrillators equipped with a bilingual interface, cprINSIGHT, and cprCOACH technologies, all provided by a German-based supplier. Each device includes an eight-year warranty, ensuring long-term reliability and service support. The defibrillators are intended for use by the US Consulate Frankfurt, which is operating under the Department of State, and will be deployed at a designated location in Frankfurt am Main with a postal code of 60435. The solicitation was posted on July 28, 2026, and responses must be submitted no later than August 12, 2026, at 2:00 PM. This is a subcontract opportunity classified under NAICS code 339112, which corresponds to the manufacturing of surgical and medical instruments. There is no set-aside designation specified for this procurement.

General Info

Twelve Lifepak CR2 4G defibrillators with bilingual interface and warranties supplied to US Consulate Frankfurt.

Agency

Department Of State → US Consulate FrankfurtView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

Frankfurt am Main, DE-HE, 60435, DEU

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 02:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of State → US Consulate Frankfurt

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of State → US Consulate Frankfurt

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 12 new Lifepak CR2 4G semi-automatic defibrillators with bilingual interface, cprINSIGHT and cprCOACH technologies, and 8-year warranty from a German-based provider.

Similar Contracts

Same NAICS industry code

6515--Monitor/DefibrillatorThe solicitation seeks a monitor/defibrillator device under a service-disabled veteran-owned small business set-aside, exclusively available to contractors that are certified as service-disabled veteran-owned small businesses. The contract is identified by solicitation number 36C26226Q1267 and falls under NAICS code 339112, which pertains to medical equipment and supplies manufacturing. The posting date is July 29, 2026, with a response deadline of July 31, 2026, at 8:00 PM Eastern Time. The contracting office is the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs, located in Gilbert, Arizona, and the primary point of contact is Contracting Officer Debby Abraham, reachable by phone at 562-766-2234 or email at debby.abraham@va.gov. The equipment is intended for use at the VA Long Beach facility, though the exact delivery location details are unspecified in the provided data. This is a combined solicitation, meaning it may include both competitive and non-competitive elements under federal acquisition regulations, and all proposals must strictly comply with the requirements outlined in the attached solicitation document.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 5 hours ago

DEADLINE

6515--Philips Neximer Laser systemThe James A. Haley Veterans Hospital in Tampa, Florida, is seeking to procure a Philips Neximer Laser system for use in its Cardiology Section to support interventional cardiology procedures, including the treatment of coronary and peripheral vascular conditions and cardiac lead management. The equipment must meet specific physical characteristics to ensure it can perform the required clinical functions in alignment with the hospital’s Statement of Need. This procurement is being conducted as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under NAICS code 339112, with the solicitation number 36C24826Q1018 issued by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8. Responses are due by 4:00 PM Eastern Time on August 6, 2026, and any questions regarding the solicitation must be submitted via email to Katrina Tavares, the Contracting Officer, no later than 2:00 PM Eastern Time on August 3, 2026. The place of performance for this contract is the hospital’s location at 13000 Bruce B Downs Blvd, Tampa, Florida 33612.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 5 hours ago

DEADLINE

BULB, OTOSCOPEThe contract is for the procurement of 15 otoscope bulbs under NSN 6515-01-647-7534, sourced from Welch Allyn, Inc. with part number 06500-U, requiring delivery within 20 days to Fort Bragg, North Carolina, under FOB destination terms. The item is classified as a FDA-regulated Class I medical device, requiring compliance with registration, listing, labeling, and GMP standards even if a 510(k) is not mandatory. Packaging must adhere to commercial standards specified in the procurement document, with each unit sealed in a protected container and shipped in suitable exterior containers ensuring safe, cost-effective delivery. All marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The items must be shipped via traceable freight methods, excluding parcel post, and palletization must comply with DLA packaging requirements. The contract reference number is SPE2DS-26-T-278L, with a response deadline of August 3, 2026, and the required delivery date is July 29, 2026. The purchasing unit price is $15.00 per unit, totaling $225, with no variance allowed in quantity. The contracting official must submit a referral in EBS to confirm regulatory compliance, including manufacturer and bidder details. The supply chain and delivery logistics are managed under Defense Logistics Agency protocols with specific identification codes for tracking and accountability.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

NEEDLE, ACUPUNCTUREThe contract specifies the procurement of acupuncture needles measuring 0.30 mm in diameter by 50 mm in length, with a unit of issue of a package containing 100 needles. Each package must be labeled with the NSN 6515-01-674-2741, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract number alongside the lot number. All containers must be marked with the lot control number and manufacture date prefixed by “MFD”. The supplier must clearly identify the company and part number being provided, including approved identifiers such as LHASA OMS, INC. P/N SJ.30X50 and OWENS & MINOR DISTRIBUTION INC P/N 6244RM128488. The product is regulated by the FDA, requiring referral through EBS for confirmation by the product specialist prior to award, with full bidder and manufacturer details provided. All packaging must comply with commercial standards, be sealed to protect contents from damage, and be shipped in suitable exterior containers for safe transit at the lowest carrier rate. Labeling and marking must follow Medical Marking Standard No. 1, surpassing references to MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The delivery is FOB destination, with a strict 20-day delivery timeline and a required delivery date of July 29, 2026. No quantity variance is permitted. The items must be palletized per RP001, shipped via traceable means excluding parcel post, and delivered to the specified military facility at Fort Bragg, North Carolina. The contract is issued under solicitation SPE2DS-26-T-277G, with total quantity of 4 packages and a unit price of $4.00 per package.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

REFILL MODULES, PROCThe contract specifies the procurement of twenty-eight refill modules for the Brosewell Hinkle Pediatric Resuscitation System, designed for use with the seven-color packs or color-code cart. These modules support critical pediatric emergency procedures including intraosseous access, oxygen delivery, intubation, and IV delivery, and are explicitly latex-free to ensure safety and compliance with medical standards. Each complete unit must be packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers suitable for safe transport by common carriers at the lowest possible cost to the specified delivery point at Fort Bliss, ZIP 79918-2527. All items must conform to Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and labeling must follow this standard strictly. The unit of issue is each, with one unit being procured under NSN 6515-01-513-9488 and purchase request 7017631807. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling compliance. The solicitation, issued under SPE2DS-26-T-277L, has a response deadline of August 3, 2026, and requires delivery within 20 days after award. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with primary point of contact Brooke Webb.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CATHETER, INTRAVENOUSThe contract specifies the procurement of 6 packages of intravenous catheters, each containing 200 units, for a total of 1,200 catheters. Each catheter is a 20-gauge polyurethane device with a 1-inch straight needle, featuring a passive safety design that automatically engages a safety clip when the bevel exits the catheter hub, with the bevel orientation clearly marked on the push-off plate. The catheters have no wings, are sterile, and must comply with strict shelf life requirements: a minimum of 60 months from manufacture and no more than 9 months elapsed between manufacturer date and delivery to the government. All labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, adhering to the latest revision of MMS1A standards. The product must meet technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, and packaging must conform to DLA requirements. The contract includes provisions for the removal of government identification from non-accepted supplies and applies to covered defense information. The solicitation number is SPE2DS-26-T-282X, with a response deadline of August 3, 2026, and delivery must be completed within 20 days after order. The point of contact is Vernon Stevenson of the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

WIRE, BONEThe contract specifies the procurement of sterile Kirschner wires, described as threaded, 9 inches long, with a diameter of 0.045 inches and diamond-point ends on both sides, supplied in packages of five units per package, with a total order quantity of four packages. The item is regulated by the FDA and requires confirmation through the EBS referral system, with mandatory inclusion of bidder and manufacturer details including part numbers such as ZIMMER INC P/N 47-0262-012-00 and TWO RIVERS MEDICAL P/N 47-262-12-00. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and protection during transit. Each unit must be sealed in a container that prevents damage, and shipping containers must ensure safe delivery at the lowest cost to the designated destination, which is APO 96260-5479. The contract adheres to DLA packaging and quality requirements under RP001 and RA001, referencing the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The NSN is 6515-01-466-5249, with a delivery window of 84 days, FOB destination, zero quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DS-26-T-280T, with a response deadline of August 3, 2026, issued under NAICS code 339112 by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BRACE, WRIST AND FOREARThe contract pertains to the procurement of two wrist and forearm braces with NSN 6515-01-699-6578, supplied by NORTH COAST MEDICAL, INC. under part number NC91263, for delivery within 84 days to a designated military medical facility in APO AE 09227-0000. Each unit must be individually sealed in a commercial-grade container that protects against damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible rate. All packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions must follow RP001 and other referenced DLA guidelines. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, listing, labeling, and GMP standards, though a 510(k) may or may not be required. The contract specifies zero variance in quantity, with inspection and acceptance occurring at destination, and mandates adherence to DLA packaging and marking protocols including palletization standards. Delivery is FOB destination, and transportation must conform to DLAD procedural notes C19 and C20. The solicitation is issued under SPE2DS-26-T-279E with a response deadline of August 3, 2026, and the item is procured under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CANNULA, NASAL, OXYGENThe contract specifies the procurement of nasal oxygen cannulas, described as disposable plastic devices with curved tubing, crush-resistant lumens, beveled tips, and a flexible lip plate, designed for nonsterile use. Each unit is packaged in quantities of 25, with a total order of two packages, totaling 50 units. The product is identified by NSN 6515-01-473-7526 and is subject to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-277D, has a response deadline of August 3, 2026, and delivery must be completed within 20 days of award to Fort Bliss, TX, 79918-2527. This is a federal procurement under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain, with Patrick Esposito as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

DRESSING, WOUND, FIRST AThis is a sterile, vacuum-packed trauma dressing designed for emergency wound care, featuring an Israeli-style compression bandage that integrates a non-adherent wound pad, an elastic webbing component, a plastic pressure bar, and a plastic closure/tourniquet bar—all contained in double vacuum-sealed pouches. The wound pad measures 10 by 17 cm and is composed of non-woven high-density polyethylene, cotton, and polyethylene; the elastic portion extends to 4 meters when stretched and is made of polyamide, nylon-wrapped rubber, and cotton. The entire assembly is sterile, OD green in color, and intended for single-unit use. The product must have a 96-month shelf life with no extensions permitted, and no more than 14 months may have elapsed from the date of manufacture to the date of government delivery. Labeling must include the manufacturer date, expiration or retest date, and contract or lot number in compliance with the latest revision of MMS1A. Packaging, quality, and handling must meet DLA procurement standards, including requirements for covered defense information and removal of government identification from rejected supplies. The item is identified by NSN 6510-01-460-0849 and falls under NAICS code 339112. Bidders must provide the source and part number being offered. This solicitation, issued under contract SPE2DS-26-T-280Z, requires delivery to Fort Bliss, Texas, within 20 days of award, with responses due by August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SPLINT, EXTREMITY SPLINThe contract pertains to the procurement of two Extremity Splint Kits, specifically medium-sized vacuum splints measuring 27.5 by 20 inches, constructed with vinyl-felt material and filled with fire-retardant polystyrene beads, conforming to the Deluxe Extremity Splint Kit component specifications. These splints are color-coded and intended for immobilization of extremities, with a unique NSN of 6515-01-398-9583 and a unit of issue of each. The solicitation, issued under number SPE2DS-26-T-278V, was posted on July 28, 2026, with responses due by August 3, 2026, and requires delivery within 84 days of award. The procurement is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance directed to APO, ZIP 96260-5479. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, mandates compliance with DLA packaging standards, applies covered defense information protocols, and includes a requirement for removal of government identification from non-accepted supplies. The point of contact for inquiries is Brooke Webb, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

GAUGE COVER RESPIROThe contract pertains to the procurement of a gauge cover designed for use with Mark-B and Mark-14 respirometers, identified by part number 00-145 and NSN 6515-01-477-4292, with a required quantity of one unit. The item is regulated by the FDA and must be supplied by Southern Safety Sales, Inc., with bidding details including manufacturer and source information clearly specified. Packaging must comply with commercial standards as outlined in DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in exterior packaging that guarantees safe delivery via common carrier at the lowest cost to the destination specified as Travis AFB, California, with delivery required within 20 days FOB destination. All markings must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and the item must be inspected and accepted at the point of delivery without variance in quantity. The contract is part of a federal solicitation issued under SPE2DS-26-T-277E, governed by DLA’s Master List of Technical and Quality Requirements, and requires compliance with defense information protocols. The bidder must provide full source and part details, and the procurement falls under NAICS code 339112 for surgical and medical instrument manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of State → US Consulate Frankfurt

Same awarding agency

First Aid Emergency Kit SupplyThe contract requires the supply of 12 First Aid Emergency Kits, each containing a defined set of disposable medical items such as a resuscitation mask, gloves, scissors, a razor, a washcloth, and a hair tie. All items must be properly packaged and labeled in German to meet language and usability requirements for the intended users. The kits are intended for emergency response use and must adhere to specified content standards to ensure readiness and compliance with safety protocols. This is a subcontract under the US Consulate Frankfurt, which operates under the Department of State, with performance to occur in Frankfurt am Main, Germany, at the postal code 60435. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, at 2:00 PM. The NAICS code 339999 indicates this falls under miscellaneous manufacturing, reflecting the assembly and packaging nature of the kits. There is no set-aside designation, and no point of contact information is provided in the data. The full details and submission portal can be accessed via the provided SAM.gov link.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Commissioning and Technical Instruction ServicesThe contract involves the on-site or remote commissioning of twelve defibrillators, encompassing full setup, activation of connectivity features, and creation of legally compliant logbooks in accordance with §7 MPBetreibV. Each device must be properly configured for operational readiness and integrated with required reporting systems. Concurrently, certified CPR training with hands-on simulation is to be provided to designated personnel, ensuring they are fully qualified to respond to cardiac emergencies using the deployed equipment. The service delivery must meet all technical and regulatory standards to facilitate immediate use in real-world scenarios. This subcontract under NAICS code 541330 is issued by the US Consulate Frankfurt, part of the Department of State, with performance required at Frankfurt am Main, ZIP code 60435. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, by 2 PM. All work must be completed within the specified location or through approved remote protocols, and compliance with German medical device operating regulations is mandatory. The contract does not specify set-aside status or point of contact details, but timely submission and adherence to technical and training specifications are critical for acceptance.

Engineering Services

POSTED

DEADLINE

Mobile Data Connectivity Service – Lifetime Data PlansThe contract seeks to establish lifetime mobile data plans for 12 Lifepak CR2 units, enabling continuous remote monitoring, software updates, and seamless integration with the LIFELINKcentral and LIFENET systems. These data plans are critical to ensure uninterrupted communication and operational functionality of the defibrillators, supporting timely clinical response and system reliability in emergency settings. The service is tied directly to the deployment and ongoing maintenance of these medical devices, ensuring they remain connected and up to date without additional recurring costs. The contract is classified as a subcontract under NAICS code 517110, which corresponds to wireless telecommunications carriers, indicating the provider must offer secure, reliable, and long-term cellular connectivity solutions. The posting was announced by the U.S. Consulate Frankfurt under the Department of State, with performance required in Frankfurt am Main, Germany, at the 60435 zip code. Proposals must be submitted by August 12, 2026, and the opportunity was published on July 28, 2026, with no set-aside designation specified. The provider must ensure connectivity meets the technical and security demands of life-critical medical applications and integrates cleanly with the designated federal monitoring platforms.

Wired Telecommunications Carriers

POSTED

DEADLINE

Purchase of New Passenger Vehicle (station wagon)The United States Consulate in Frankfurt is seeking to procure a single new passenger station wagon configured to seat five individuals including the driver, with all specifications aligned to German and European Union regulatory standards. The vehicle must be delivered under DDP terms, meaning the seller assumes full responsibility for transportation, customs clearance, and payment of all duties and taxes until the vehicle is handed over at the U.S. General Consulate in Frankfurt am Main, Germany. Delivery must be completed no later than 120 days after receipt of the order, and all bids must include applicable VAT—19 percent for offers originating within Germany, or the standard VAT rate of the seller’s home country for other EU-based suppliers. The vehicle is required to include a comprehensive list of standard and safety features such as lane keep assist, blind spot assist, rear-view camera, navigation system, privacy glass, seat heaters, Apple CarPlay/Android Auto, cruise control, traffic sign assist, all-season tires, 4-wheel drive, automatic transmission, and a minimum two-year OEM warranty, along with a trunk capacity of at least 400 liters. Proposals must be submitted exclusively via email to einkauf@state.gov with the solicitation number PR16003410 clearly stated in the subject line, and the submission deadline is 16:00 hours on Friday, 5 June 2026. No formal FAR clauses, evaluation factors, or specific inspection protocols are detailed in the solicitation, and there is no set-aside for small or socioeconomic category businesses. The contract type is not explicitly stated but is implied to be firm fixed price based on the DDP delivery term and lack of cost negotiation provisions. The U.S. Department of State is the contracting agency, with procurement managed through the office in Frankfurt and no formal contracting officer or technical representative named. No packaging, marking, invoicing procedures, or accounting codes are provided, and the solicitation does not require offerors to submit Unique Entity IDs, CAGE codes, or socioeconomic certifications.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

DEADLINE

Purchase of Lifepak CR2 4G (SIM) DefibrillatorsThe U.S. Consulate General Frankfurt is seeking a firm fixed price quote for the procurement of 12 Lifepak CR2 semi-automatic defibrillators with handles, configured as 4G models with bilingual German and English interfaces, along with a lifetime mobile data plan enabling continuous data transmission. The bid must also include comprehensive instruction and commissioning services for the units and their data connectivity. All devices must fully comply with German and EU regulatory standards, and must be delivered directly from a German-based provider to meet certification requirements. Delivery to the Consulate’s premises in Frankfurt am Main is required no later than 90 days after order placement, with the quoted price inclusive of all delivery charges and 19% German VAT. Only offerors authorized to conduct business in Germany may submit bids, and if subcontractors are used, they must also be licensed in Germany and clearly disclosed in the proposal. Compliance with the requirements outlined in DOSAR 652.242-73 is mandatory, and all submissions must be submitted by the deadline of August 12, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Post-Delivery Inspection and Acceptance SupportThis contract requires on-site technical support in Frankfurt am Main during a government inspection for system acceptance, with responsibilities including conducting live demonstrations of the system, performing diagnostics to identify operational deficiencies, and resolving any issues prior to formal acceptance. The support must be rendered in person at the location to ensure the system meets all performance and compliance standards set by the US Consulate Frankfurt under the Department of State. The work is classified as a subcontract under NAICS code 811111, indicating it pertains to repair and maintenance services, and the response deadline for proposals is July 31, 2026, with the opportunity posted on July 20, 2026. The contract hinges on timely and effective resolution of system shortcomings to achieve acceptance during the inspection window.

General Automotive Repair

POSTED

DEADLINE

International Logistics and DDP Delivery ManagementThe contract requires end-to-end logistics services under DDP terms, covering all aspects of international shipment from origin to final delivery at the U.S. Consulate in Frankfurt am Main. This includes preparing and managing export documentation, handling German customs clearance, paying all applicable VAT charges, securing comprehensive insurance coverage, and ensuring secure, timely delivery to the designated consular location. The service provider must assume full responsibility for compliance with international trade regulations and all associated costs until the goods are physically received at the destination. The solicitation is classified as a subcontract under NAICS code 488510 for support activities for transportation, with a response deadline of July 31, 2026. The contracting entity is the U.S. Consulate Frankfurt under the U.S. Department of State, and performance is required exclusively within Frankfurt am Main. While no specific set-aside provisions or point of contact details are provided, the procurement is open to qualified subcontractors capable of executing complex cross-border logistics with full accountability under DDP obligations.

Freight Transportation Arrangement

POSTED

DEADLINE

Vehicle Customization and Equipment IntegrationThe contract involves the integration of advanced driver assistance systems and comfort features—such as lane keep assist, USB charging ports, and a rear camera—into the base vehicle platform, ensuring seamless functionality without compromising the original equipment manufacturer’s warranty or adherence to European Union regulatory standards. All modifications must be performed to maintain the vehicle’s factory integrity, safety certifications, and emissions compliance, with particular emphasis on meeting EU directives for automotive electronics and driver safety systems. The work is to be executed in Frankfurt am Main, aligning with local operational and logistical requirements. This subcontract is issued under NAICS code 811121, indicating an automotive repair and maintenance context, and is managed by the U.S. Department of State through its Consulate in Frankfurt. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, allowing vendors to submit proposals that demonstrate technical capability, warranty preservation protocols, and proven experience in OEM-compliant vehicle enhancements. All submissions must address how the proposed modifications will uphold vehicle performance, durability, and regulatory compliance while delivering enhanced functionality to end users under the oversight of the U.S. government entity stationed in Germany.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE

Commercial Passenger Bus Manufacturing and Final AssemblyThe contract requires the manufacture and delivery of a fully assembled 8-passenger commercial bus that meets all applicable European Union and German regulatory standards for safety, emissions, and performance. The vehicle must be completed as a final assembled unit, ready for immediate operation, and delivered under DDP terms to Frankfurt am Main, meaning all costs including duties, taxes, and transportation are borne by the supplier until the bus reaches the designated delivery point. The supplier is obligated to provide a two-year original equipment manufacturer warranty covering all components and systems, ensuring reliability and performance throughout the warranty period. This subcontract, classified under NAICS code 336111 for motor vehicle manufacturing, is issued by the US Consulate Frankfurt under the Department of State and is solicited with a response deadline of July 31, 2026. The bus is intended for official use by US government personnel or operations in Germany and must comply with all local legal and technical requirements without exception. Delivery timelines, quality controls, and documentation must align with international shipping and regulatory compliance standards, and failure to meet these specifications may result in rejection of the unit or financial penalties.

Automobile Manufacturing

POSTED

DEADLINE

Vehicle Modification and Compliance DocumentationThe contract requires the performance of specific vehicle modifications including the installation of privacy glass and the application of software updates, with all work must meet stringent standards to ensure full compliance with U.S. government requirements. The modifications are intended for vehicles used by the U.S. Consulate in Frankfurt, and the contractor must deliver complete and accurate compliance documentation to secure official U.S. government acceptance. All tasks must be executed with precision to satisfy federal safety, security, and operational protocols. The solicitation is classified as a subcontract with a response deadline of August 4, 2026, at 2:00 PM, and it falls under NAICS code 811192 which pertains to automotive mechanical and electrical repair and maintenance. The place of performance is designated as Frankfurt, Germany with a zip code of 60435, and the contracting entity is the Department of State through the U.S. Consulate Frankfurt. Although no specific set-aside provisions or point of contact are detailed, the work is critical for maintaining the integrity and functionality of official U.S. government vehicles in the region.

POSTED

DEADLINE

International Logistics and DDP Delivery CoordinationThe contract encompasses full end-to-end DDP logistics services for the transport of goods to the U.S. Consulate in Frankfurt, Germany, with all responsibilities including customs clearance, payment of import duties, comprehensive insurance coverage, and final mile delivery to the specified destination. This is a subcontract under the NAICS code 488510, which classifies it as an international freight forwarding and logistics service, managed by the U.S. Department of State through the U.S. Consulate Frankfurt. All activities must comply with international shipping regulations and ensure seamless transit from origin to the consulate’s facility at 60435 in Frankfurt, with zero financial burden on the recipient due to the DDP terms. The opportunity was posted on July 20, 2026, and responses are due by August 4, 2026, at 2:00 PM. The place of performance is strictly limited to Frankfurt, and no other locations are authorized for delivery under this agreement.

Freight Transportation Arrangement

POSTED

DEADLINE

Vehicle Configuration and Technology IntegrationThe contract pertains to the integration and verification of mandatory advanced driver assistance systems and onboard technologies for vehicles, specifically including Lane Keep Assist, Traffic Sign Assist, Rear View Camera, navigation systems, and privacy glass. These technologies must be fully functional, harmonized, and validated to meet operational requirements, ensuring seamless performance and compliance with safety and regulatory standards. The work involves technical assembly, software calibration, system diagnostics, and rigorous testing to confirm that all components operate as intended within the vehicle’s architecture. This subcontract is issued under the US Department of State and is associated with the US Consulate Frankfurt, where the work must be performed at a designated location in Frankfurt with a postal code of 60435. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, at 2:00 PM. The NAICS code 811121 indicates this is related to automotive mechanical and electrical repair and maintenance services. The contract does not specify a set-aside designation, and no point of contact information has been provided in the available data.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE