Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Fabrication and Structural Repair

Active

Federal

Response Deadline08/25/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Metal Fabrication and Structural Repair pertains to the repair, refurbishment, and replacement of damaged or corroded metal components within sunshade structures at Luke Air Force Base, including frames, supports, and fasteners. The work involves specialized metal fabrication to restore structural integrity and ensure long-term durability of these components, with all activities required to meet military-grade standards for safety and performance. The scope is limited to on-site work at the designated location and demands precision in handling corroded materials while adhering to strict environmental and safety protocols. This is a total small business set-aside under the SBA, specifically designated as a FAR 19.5 set-aside, meaning only businesses certified as small by the SBA are eligible to bid. It falls under NAICS code 332312, which classifies metal fabrication services involving structural metal products. The contract was posted on July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. The contracting activity is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at Luke Air Force Base in Arizona, with zip code 85309. The procurement is structured as a subcontract, suggesting it may be part of a larger project, but bidders must comply fully with all applicable federal and defense contractual requirements.

General Info

Small business set-aside for metal fabrication and repair of sunshade structures at Luke AFB, Arizona, under NAICS 332312.

Agency

Department Of Defense → FA4887 56 Cons CcView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Luke Air Force Base, AZ, 85309, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 25

Submission deadline

Response Deadline

08/25/2026, 06:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4887 56 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4887 56 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Repair, refurbishment, and replacement of damaged or corroded metal components of sunshade structures including frames, supports, and fasteners.

Similar Contracts

Same NAICS industry code

Structural Steel Fabrication and ErectionThe contract calls for the fabrication and on-site assembly of a structural steel framework for a building project under the jurisdiction of San Diego County, California. Performance of all work is required to occur locally in San Diego, with no specified alternative locations, ensuring that steel components are manufactured and erected according to site-specific engineering and safety requirements. The naics code 332312 indicates this is a specialized subcontract focused on structural steel fabrication and erection, distinguishing it from general contracting or other construction services. The solicitation was posted on July 24, 2026, with a firm response deadline of August 1, 2026, at 1:00 AM, leaving a narrow window for interested parties to submit proposals. As a subcontract, this engagement is likely part of a larger construction initiative managed by a prime contractor or public entity, with the winning bidder responsible for delivering precise steel components and their secure, compliant installation. All work must meet applicable technical, quality, and scheduling standards expected by San Diego County, though specific performance metrics or compliance requirements are not detailed in the provided data.

San Diego County

POSTED

DEADLINE

Supply of Standard Screw Fasteners (e.g., Bolts, Nuts, Washers)Harris County is seeking suppliers to provide a wide range of standard industrial screw fasteners including machine screws, bolts, nuts, washers, and threaded rods in both metric and imperial sizes for general county operations. The contract is structured as a subcontract with a solicitation response deadline of August 24, 2026, and was posted on July 24, 2026. The procurement falls under NAICS code 332312, which classifies it within the screw, nut, and bolt manufacturing sector. All items must meet industry standards for quality and compatibility to support diverse maintenance and construction needs across county facilities. Deliveries are expected to be made to various county locations within Texas, with no specific point of contact provided. Bidders must ensure compliance with required specifications and be prepared to fulfill ongoing supply demands as needed by county departments. The opportunity is not subject to any set-aside provisions and is open to qualified vendors through the BonfireHub portal.

POSTED

DEADLINE

Pre-Engineered Metal Building Supply and ErectionThe contract involves the supply, delivery, and structural erection of a pre-engineered metal building ranging from 3,000 to 5,600 square feet, with integrated climate control systems to ensure environmental regulation within the structure. The scope requires compliance with engineering standards for load capacity, weather resilience, and energy efficiency, with all components manufactured and assembled to meet specified performance benchmarks. The project demands precise coordination for on-site assembly, including foundation preparation, crane operations, and connection of climate control infrastructure to existing utilities or designated power sources. This is a subcontract opportunity posted by the Vermont Office of the Department of Economic Development, with a response deadline of September 1, 2026. Bidders must demonstrate experience in metal building fabrication, structural installation, and climate system integration, along with the ability to meet strict timelines and quality controls. The NAICS code 332312 identifies the work as related to prefabricated metal building system manufacturing, and no specific set-aside provisions are stated, meaning competition is open to all qualified contractors. All deliveries and installations are expected to occur at an unspecified location within Vermont, with detailed site logistics to be confirmed by the awardee after contract award.

Department of Economic Development

POSTED

DEADLINE

in about 1 month

Metal Fabrication and Shelving RefurbishmentThe contract entitled Metal Fabrication and Shelving Refurbishment involves the comprehensive restoration of metal shelving components through a series of industrial processes including straightening warped parts, precision welding, thorough rust removal, and repainting to restore structural integrity and aesthetics. Replacement of any worn or damaged components is required to ensure the refurbished shelving meets operational standards, with all work performed to uphold durability and longevity under facility use conditions. The work is to be carried out at the place of performance in Dakar, Senegal, under the auspices of the US Embassy Dakar, which is part of the Department of State. This subcontract is open for response until August 31, 2026, and falls under the NAICS code 332312, which pertains to metal fabrication services. The solicitation was posted on July 24, 2026, and while no set-aside classification or point of contact details are provided, the project is expected to be executed by a qualified subcontractor capable of handling industrial refurbishment tasks with precision and adherence to safety and quality benchmarks. All deliverables must align with the Embassy’s functional requirements and operational environment in Dakar.

US Embassy Dakar

POSTED

DEADLINE

in about 1 month

Fence Materials Supply (Prefabricated Panels, Posts, Hardware)The contract is for the supply of prefabricated fencing panels, structural posts, fasteners, and corrosion-resistant coatings to extend a secure perimeter, with all materials required to meet strict durability and performance standards. The scope includes delivery of fully assembled components ready for installation, with an emphasis on long-term resistance to environmental degradation, particularly in coastal conditions given the place of performance in Atlantic Beach, North Carolina, zip code 28512. All items must be compatible with existing infrastructure and installed to ensure a continuous, tamper-resistant barrier. This is a total small business set-aside under the SBA program, classified under NAICS code 332312 for fabricated metal product manufacturing, ensuring that only small businesses are eligible to respond. The opportunity was posted on July 24, 2026, with a firm response deadline of August 14, 2026, and is structured as a subcontract under the Department of Homeland Security, managed by the Base Elizabeth City (00081) office. Performance will be executed on-site at Atlantic Beach, requiring precise scheduling and logistics coordination to meet operational timelines. The contract does not specify a point of contact, and details are accessible through the official SAM.gov workspace link.

Base Elizabeth CITY(00081)

POSTED

DEADLINE

Steel Fabrication and Welding ServicesThe contract involves custom steel fabrication services for critical components including mulcher housings, cutting drums, and mounting frames, with an emphasis on precision welding to ensure compliance with high durability and performance standards required for heavy-duty operational environments. All work must adhere to strict quality and structural integrity benchmarks suitable for military-grade equipment usage. This is a total small business set-aside subcontract under NAICS code 332312, open exclusively to small businesses as defined by the SBA, and is managed by the Department of Defense under the Commanding General. The solicitation was posted on July 24, 2026, with a firm deadline for responses on July 29, 2026, at 4:00 PM. Performance will take place in Twentynine Palms, California, with zip code 92277, and the contract is intended to support defense-related equipment needs through specialized fabrication capabilities.

Commanding General

POSTED

DEADLINE

Structural Metal Fabrication and Installation (Riser Manway & Internal Ladder)The contract calls for the fabrication and installation of a new riser manway and internal access ladder, requiring comprehensive structural steel work, precision welding, and application of corrosion-resistant coatings to ensure long-term durability in demanding environments. All work must be performed at Goodfellow AFB, with the full scope centered on integrating these components into existing infrastructure while meeting strict safety and operational standards. The project demands qualified labor with expertise in industrial metal fabrication and protective coating applications, with particular attention to compliance with material specifications and environmental resilience requirements. This is a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses certified under the Small Business Administration can compete for this opportunity. It is classified under NAICS code 332312, which specifically pertains to structural metal fabrication. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, at 7:00 PM. The contracting entity is the Department of Defense through the FA3030 17 Cons Cc office, and the work location is firmly designated at Goodfellow AFB with a zip code of 76908. All proposers must be prepared to meet rigorous defense contract standards for quality, scheduling, and site safety.

FA3030 17 Cons Cc

POSTED

DEADLINE

Outdoor Recreation - Mobile BleachersThe 6th Contracting Squadron at MacDill Air Force Base in Tampa, Florida, is soliciting bids for two identical, brand-new, mobile hydraulic-operated bleacher units with a combined minimum seating capacity of 300 spectators to support the base’s Outdoor Recreation program. This acquisition is a 100 percent small business set-aside under FAR 19.5, with NAICS code 332312, and is issued as a firm fixed-price contract using a Lowest Price Technically Acceptable source selection method. The bleachers must be highway-compliant, feature integrated battery-powered hydraulic systems, ADA-compliant enclosed riser stairs with handrails, leveling jacks, and a towing coupler, and must be delivered F.O.B. destination to MacDill AFB within 60 calendar days after contract award. All units must comply with stringent DoD packaging and marking standards, including MIL-STD-129 for external shipment labeling and MIL-STD-130 for permanent Unique Item Identification (UII) using Data Matrix barcodes compliant with ISO/IEC 16022 ECC 200. Each item must be registered in the DoD IUID Registry via Wide Area WorkFlow (WAWF), and invoicing must be submitted exclusively through WAWF using appropriate document types based on the fixed-price nature of the line item. The contractor is required to comply with all applicable federal and defense regulations, including prohibitions on inverted domestic corporations, trafficking in persons, and the acquisition of covered telecommunications equipment from restricted sources. Offerors must hold a current Unique Entity Identifier (UEI) and self-certify as a small business, and any joint venture structure used to meet socioeconomic criteria must be fully disclosed. Personnel performing work on base must obtain proper identification passes compliant with Air Force security directives and submit advanced lists for access clearance. Technical specifications, performance standards, and acceptance criteria are detailed in the Statement of Work dated 14 July 2026, which was amended on 24 July 2026 to remove a prior requirement for enclosed ADA stairs, now fully defined in the updated document. Proposals must be submitted via email to two designated points of contact no later than 29 July 2026 at 11:00 a.m. EDT, and questions are due by 24 July 2026 at the same time. ZIP files are prohibited due to network security restrictions. Final acceptance

FA4814 6 Cons Pk

POSTED

DEADLINE

EOU Sunshades Creech AFBThe Contract F4FANG6133A001 for the Experimental Operations Unit at Creech AFB requires the design, supply, and construction of four new shade structures with four aircraft parking bays each, to be installed on the south ramp west of existing structures on the airfield’s parking apron in Indian Springs, Nevada. Concurrently, four existing sunshades must be relocated and reoriented to align with the new structures, and a fifth sunshade must be demolished. Each new structure must incorporate LED lighting with a 12-hour battery backup powered by a photovoltaic array, along with conduit, copper wiring, service power outlets, a service panel, Una-strut support assembly, and a solar-powered obstruction light. All designs must adhere to specified aesthetic standards including tapered I-beam girders and Frazee Paint #213 Travatan finish, and comply with structural codes including UFC 3-301-01, IBC 2018, ASCE 7-16, and AISC standards to withstand 110 MPH sustained winds. The contractor must deliver progressive design drawings, redline construction documents, and stamped as-built AutoCAD and PDF record drawings, along with a comprehensive Operations and Maintenance Manual detailing materials, fasteners, and torque specs, and submit required FAA Form 7460-1 notifications. The project is subject to a 210-day performance period from notice to proceed, with 90 days allocated for design and 120 days for construction. The solicitation is a Firm Fixed Price (FFP) contract under a Total Small Business Set-Aside (NAICS 332312, size standard: 500 employees), requiring offerors to self-certify as a small business and provide their Unique Entity Identifier and CAGE code. Proposals must be submitted electronically via email to the designated point of contact by the deadline of August 7, 2026, at 5:00 PM PDT, with no submissions accepted through SAM.gov. Evaluation will be conducted on a Lowest-Priced, Technically Acceptable (LPTA) basis, requiring only a pass-fail technical assessment and full, accurate line-item pricing with no trade-offs between cost and non-cost factors. All work must occur at Creech AFB under strict security protocols, including mandatory security clearances for personnel, no weapons on base, no photography on the flight line, and FOD mitigation

FA4861 99 Cons Lgc

POSTED

DEADLINE

EE517-270245 - Cylindrical fenders for Base-Côte-NordThe contract, titled EE517-270245 - Cylindrical fenders for Base-Côte-Nord, is a federal solicitation issued by the Department of Public Works and Government Services under the Government of Canada, with a NAICS code of 332312, indicating manufacture of marine hardware. The solicitation was posted on July 24, 2026, and requires responses no later than August 12, 2026, at 7:00 PM Eastern Time. The estimated contract duration is 16 months, with a proposed start date of August 14, 2026, and performance is scheduled to occur in Québec. The primary point of contact for inquiries is Anna Meyerovich, Contracting Authority, reachable via email at anna.meyerovich@tpsgc-pwgsc.gc.ca. The opportunity is open without specific set-aside designation and can be viewed on the Canada Buys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Sheet Metal and Ductwork Fabrication/InstallationThe contract involves the supply, fabrication, sealing, insulation, and installation of sheet metal ductwork compliant with air quality and pressure standards, aligned with NAICS code 332312 for sheet metal work. The scope requires precise execution to meet technical specifications for performance and safety, ensuring the duct systems function effectively within the required environmental and operational parameters. Work is to be performed at various locations across Michigan under the oversight of DTMB, with no single fixed site designated for performance. The solicitation was posted on July 24, 2026, and responses are due by August 12, 2026, at 6:00 PM Eastern time. This is a subcontract opportunity with no set-aside designation applied, indicating it is open to all eligible contractors regardless of business size or ownership characteristics. There is no designated point of contact provided in the data, and the place of performance spans multiple unspecified locations within the state. Interested parties must access the official portal via the provided link to obtain full solicitation details and submit proposals.

POSTED

DEADLINE

Structural Steel Fabrication and InstallationThe contract entails the full scope of structural steel fabrication and installation, requiring precise field measurements, template development, and on-site assembly of steel components. It includes delegated design responsibilities, coordination of welding activities, and the submission of detailed shop drawings along with structural analysis reports to ensure compliance with engineering standards. The work spans multiple locations across Michigan, with no single fixed site designated for performance, indicating a distributed project requiring mobility and adaptation to varied site conditions. This subcontract, classified under NAICS code 332312, is issued by DTMB Michigan and requires proposals to be submitted by August 12, 2026. There is no specified set-aside status, and the contract is open to qualified subcontractors capable of delivering end-to-end steel solutions from initial measurement through final installation. All work must meet stringent technical and quality requirements, with particular emphasis on accurate documentation, structural integrity, and coordination among design, fabrication, and field teams to ensure seamless execution across various project sites.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4887 56 Cons Cc

Same awarding agency

Heavy Equipment and Rigging ServicesThis contract calls for heavy equipment and rigging services to facilitate the access and replacement of large sunshade components requiring elevated work, typically involving lifts, cranes, or specialized rigging operations. The work is essential for maintaining structural and operational integrity at Luke Air Force Base, where precise and safe handling of oversized components is critical in a high-security military environment. All tasks must be performed in compliance with stringent safety and quality standards due to the nature of the facility and the critical function of the sunshade systems. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, with the NAICS code 238990 covering other special trade contractors. The posting date is July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. Performance is solely located at Luke Air Force Base in Arizona, with the contracting activity under the Department of Defense, specifically FA4887 56 Cons Cc. Interested bidders must be certified as small businesses and prepared to execute complex, precision-based operations in a controlled military setting.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Material Supply – Shade FabricThe contract calls for the supply of high-durability architectural fabric specifically designed for replacing sunshade canopies, with stringent requirements for UV resistance, tensile strength, and fire resistance to meet industry and safety standards. The material must maintain structural integrity and aesthetic performance under prolonged exposure to harsh environmental conditions typical of outdoor military installations. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, meaning only small businesses are eligible to compete, and it is classified under NAICS code 316110, which covers textile mill products manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of August 25, 2026, at 6:00 PM. Performance of the contract is required at Luke Air Force Base, with a zip code of 85309, indicating the fabric will be installed at a U.S. Department of Defense facility under the 56th Combat Support Group. Although no specific point of contact or office address is provided, the contracting activity is identified as FA4887 56 Cons Cc. The work involves delivering certified fabric that meets technical specifications for long-term outdoor use, ensuring safety, longevity, and compliance with federal and military-grade performance benchmarks, all while adhering to small business procurement objectives.

Leather and Hide Tanning and Finishing

POSTED

DEADLINE

in about 1 month

Material Supply – Metal ComponentsThe contract titled Material Supply – Metal Components is a small business set-aside subcontract issued by the Department of Defense under the FA4887 56 Cons Cc agency, specifically targeting total small business participation as defined by the SBA under FAR 19.5. It seeks the supply of replacement steel or aluminum components including beams, brackets, and fasteners required for the repair of sunshade systems, with performance required at Luke Air Force Base in Arizona, 85309. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 6:00 PM Eastern Time. The North American Industry Classification System code assigned to this procurement is 332311, indicating it falls under the manufacturing of fabricated metal product manufacturing, specifically architectural and structural metals manufacturing. All suppliers must be certified small businesses eligible to compete in a total small business set-aside and are expected to deliver components that meet exacting technical and quality standards suitable for military-grade infrastructure maintenance.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

in about 1 month

Preventive Maintenance and Inspection ServicesThe contract titled Preventive Maintenance and Inspection Services is a small business set-aside subcontract under the North American Industry Classification System code 541690, issued by the Department of Defense through the agency FA4887 56 Cons Cc. It requires the contractor to perform routine inspections, lubrication, bolt tightening, and detailed reporting to ensure structural safety and compliance with a specified performance work statement. All services are to be conducted at Luke Air Force Base in Arizona with the zip code 85309, and the work is tied to maintaining operational readiness and regulatory compliance for critical infrastructure. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 6:00 PM, with the contract reserved exclusively for small businesses as defined under the Small Business Administration’s Total Small Business Set-Aside provisions.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 month

Fabric or Tensile Membrane ReplacementThe contract calls for the inspection, removal, and replacement of worn or damaged fabric membranes used in sunshade canopies at Luke Air Force Base, with a zip code of 85309. This work is classified under NAICS code 238990 and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, by 6:00 PM. The contract is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at the designated location on the base. The scope emphasizes precision in handling tensile membrane systems, requiring qualified contractors to assess damage, safely remove degraded materials, and install new membranes that meet performance and durability standards for outdoor canopy structures.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Coating and Paint Application (Protective)The contract entails the repainting and application of corrosion protection coatings to sunshade structures at Luke Air Force Base, with the primary goal of extending their service life through the use of weather-resistant materials designed to withstand environmental exposure. The work is classified under NAICS code 238220, indicating a specialty trade contractor scope focused on architectural coating and painting services, and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions, ensuring eligibility is limited to firms classified as small by federal standards. All work must comply with technical requirements for surface preparation, coating application, and durability standards specific to military infrastructure, with performance expected to maintain structural integrity and aesthetic quality under harsh operational conditions. This subcontract, posted on July 24, 2026, has a response deadline of August 25, 2026, and is managed by the Department of Defense under the FA4887 56 Cons Cc office. The place of performance is definitively located at Luke Air Force Base with a zip code of 85309, and all contractors must be prepared to meet federal defense specifications for protective coatings, including adherence to environmental, safety, and quality control protocols. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered for award under this competitively set-aside opportunity, with payment, compliance, and delivery terms governed by standard federal subcontracting regulations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Systems Testing & Calibration ServicesThe contract seeks qualified small businesses to perform independent testing, calibration, and validation of radar systems, solar performance components, and overall system durability under real-world field conditions. This includes exposing equipment to environmental stressors such as temperature extremes, humidity, vibration, and electromagnetic interference, while ensuring all measurements and calibrations are traceable to NIST standards. The work is critical to verifying the accuracy, reliability, and long-term resilience of defense-related sensor and energy systems deployed in operational environments. Performance is required at Luke Air Force Base with a zip code of 85309, and the opportunity is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 5, 2026, at 10:30 PM Eastern Time. This subcontract is issued under NAICS code 541380, which pertains to other scientific and technical consulting services, and is managed by the Department of Defense through the FA4887 56 Cons Cc office. All testing protocols must adhere strictly to established technical and compliance benchmarks to ensure data integrity and operational readiness.

Testing Laboratories and Services

POSTED

DEADLINE

Trailer Fabrication & Mobility PlatformThe contract calls for the fabrication of rugged, towable trailers that meet DOT compliance standards and are designed for military base operations, with integrated mounting systems to securely support radar equipment, display units, and solar power components. These trailers must be engineered for durability and mobility under demanding field conditions, ensuring reliable deployment and operational readiness at Luke Air Force Base, Arizona. The project emphasizes structural integrity, environmental resilience, and seamless integration of technical systems to support defense-related surveillance and energy needs. This is a small business set-aside subcontract under NAICS code 336213, exclusively open to small business concerns as defined by the SBA. The opportunity was posted on July 24, 2026, with a firm response deadline of August 5, 2026, at 10:30 PM Eastern Time. The contracting activity is managed by the Department of Defense under office FA4887 56 Cons Cc, and performance will be centered at Luke Air Force Base with a zip code of 85309. All submissions must adhere to the requirements for compliance, ruggedization, and system integration without reliance on external documentation beyond the specifications outlined in the solicitation.

Motor Home Manufacturing

POSTED

DEADLINE

Solar Power System & Battery SupplyThe contract requires the supply of complete off-grid solar power systems designed to continuously operate radar and display units at Luke Air Force Base, with a zip code of 85309. These systems must include photovoltaic panels, charge controllers, deep-cycle batteries, and integrated power distribution components capable of ensuring uninterrupted functionality in remote or non-grid-connected environments. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside authority, as defined by FAR 19.5, with the NAICS code 335912 indicating classification under other electrical equipment and component manufacturing. Proposals must be submitted by August 5, 2026, at 10:30 PM Eastern Time, with the contract issued as a subcontract under the Department of Defense’s FA4887 56 Cons Cc office. The system must be engineered for long-term reliability in operational conditions without access to conventional power infrastructure.

Primary Battery Manufacturing

POSTED

DEADLINE

LED Message Display & Controller SupplyThe contract involves the supply of high-brightness, weather-resistant LED message boards equipped with real-time speed feedback and programmable safety messaging capabilities, alongside integrated control software and remote management functionality. These displays are intended for deployment at Luke Air Force Base and must reliably operate in demanding environmental conditions while delivering dynamic safety communications to enhance site awareness and operational safety. The procurement is structured as a subcontract with a Total Small Business Set-Aside under the SBA program, meaning only eligible small businesses may submit proposals. The NAICS code 334118 applies to this solicitation, categorizing it under other electronic component manufacturing. The response deadline is August 5, 2026, and the award will be managed by the Department of Defense through the FA4887 56 Cons Cc office. All equipment must meet performance standards for durability, clarity, and remote controllability to ensure consistent, real-time communication capabilities at the designated installation location.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Solar-Powered Radar Speed Trailer Design & IntegrationThe contract seeks the engineering design, integration, and assembly of mobile solar-powered radar speed trailers to be deployed at Luke Air Force Base. The solution must include integrated radar detection systems, real-time speed display mechanisms, advanced power management using solar energy, and robust structural trailer components capable of reliable field operation. The entire system must be self-sufficient, leveraging solar power to ensure continuous functionality without reliance on external electrical inputs, and must be engineered for durability in outdoor, high-traffic environments. All components must be fully integrated and tested to meet operational standards for military installation use. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with NAICS code 336399 indicating it falls under other transportation equipment manufacturing. The opportunity was posted on July 24, 2026, and responses are due by August 5, 2026, at 10:30 PM UTC. The contract is managed by the Department of Defense under FA4887 56 Cons Cc, with performance required exclusively at Luke Air Force Base in Arizona, zip code 85309. The procurement emphasizes innovation in renewable energy application, mobile surveillance technology, and systems integration tailored to the specific needs of a military installation.

All Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Solar-Powered Radar Speed and Message TrailersThe U.S. Department of Defense, through the 56th Contracting Squadron at Luke Air Force Base, Arizona, has issued solicitation FA488726Q0038 for the procurement of solar-powered radar speed and message trailers configured as Stalker Radar MC360 units measuring 4 feet by 8 feet. This effort is designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 334290 indicating the procurement is restricted to small businesses in the Electronic Component Manufacturing sector. The trailers are intended for deployment at Luke AFB to enhance force protection, traffic monitoring, and emergency alerting by integrating radar-based speed detection with dynamic message displays, supporting existing security systems such as Giant Voice and Eagle Eyes. The solicitation specifies that funds are not currently available and no award will be made until appropriation is secured, with the Government retaining the right to cancel the solicitation at any time without incurring liability for offeror costs. The place of performance is clearly defined as Luke Air Force Base, Arizona, 85309, and the deadline for submissions is August 5, 2026. Point of contact for inquiries is Hayley Munnell, with Jacqueline Aranda as the secondary contact. Despite references to attached solicitation materials outlining salient characteristics, no detailed specifications, packaging requirements, evaluation factors, pricing structure, or contract administration details such as payment terms, COR/COTR assignments, or inspection criteria were provided in the available documentation. The contract type is listed as combined, but the specific pricing format, CLIN structure, delivery schedule, FOB terms, and invoicing method remain undefined. Offerors are expected to possess a valid UEI and CAGE code and self-certify as small businesses, but no completed representations or certifications are included in the materials. All substantive details related to technical compliance, quality standards, and delivery logistics appear to be contingent on unprovided attachments.

Other Communications Equipment Manufacturing

POSTED

DEADLINE