Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metal Fabrications, Gratings, and Access Doors

Active

State & Local

Response Deadline11/10/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and installation of stainless steel metal walkways, floor plates, and access hatches for City wastewater facility projects managed by the Transportation and Public Works Department of the City of Santa Rosa. The scope of work requires the erection of metal bar grating according to ANSI/NAAMM MBG 531, checkered floor plates, and ASTM C1802 access hatches. A critical requirement for this project is the provision of structural calculations that must be signed and sealed by a licensed Professional Engineer. The contract is categorized under NAICS code 332312 and was posted on September 29, 2026, with a response deadline of November 10, 2026. The selected subcontractor will be responsible for the full delivery and installation of all gratings, floor plates, and access doors as specified in the project requirements.

General Info

Fabrication and installation of stainless steel walkways and hatches for Santa Rosa wastewater projects.

Agency

California → Transportation and Public Works Department of City of Santa Rosa

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of C01979.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Secondary Clarifier No 1 Rehabilitation Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 29

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Transportation and Public Works Department of City of Santa Rosa

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Transportation and Public Works Department of City of Santa Rosa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs metal walkways, floor plates, and access hatches for prime contractors on City wastewater facility projects. Erects metal bar grating per ANSI/NAAMM MBG 531, checkered floor plates, and ASTM C1802 access hatches using stainless steel materials. Requires structural calculations signed and sealed by a Professional Engineer. Delivers installed gratings, floor plates, and access doors.

Similar Contracts

Same NAICS industry code

Fabrication of Stackable Storage and Transport Frames (NSN 8145-01-586-0404)This subcontract involves the fabrication of 15 stackable storage and transport frames for prime contractors supporting Department of Defense supply contracts. The manufacturer must produce the frames in accordance with the technical specifications for NSN 8145-01-586-0404 and part number 06080-A4, utilizing industrial processes such as metal stamping, welding, or bending. The contractor is required to maintain strict adherence to the DLA Master List of Technical and Quality Requirements and ensure full compliance with the Buy American Act. Performance for this contract is centered at Fort Bliss, Texas, under NAICS code 332312.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

Supply of Square/Rectangular Metallic Tubing (ASTM A513)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacture or sourcing of square and rectangular metallic tubing for prime contractors. The specific requirements call for 1 inch square tubes with a 0.125 inch wall thickness and 24 feet length, adhering to ASTM A513 Grade MT 1010 to MT 1020, Type 2 (A.W.C.R.), Flash In standards. The contractor must utilize precision cutting and forming equipment to ensure all dimensional tolerances and DLA packaging requirements are met for the delivery of NSN 4710010841168. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Fire Hose Siamese ConnectionsThis subcontract involves the procurement and delivery of 116 Siamese Connections for fire hoses, identified by NSN 4210-00-255-0232, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, specifically performing sampling per MIL-STD-1916 or ASQ H1331 Table 1 and packaging items according to MIL-STD-2073-1E. All 116 units are to be delivered FOB Origin. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 332312.

DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

Fabrication of Vehicular Step AssembliesThis subcontract involves the fabrication of 22 completed vehicular step assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Engines. The manufacturer must produce parts according to NSN 2590-01-660-9231 and Oshkosh Defense LLC P/N 4344300 specifications, while ensuring strict adherence to the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in New Cumberland, Pennsylvania. A critical restriction is placed on the production process, as additive manufacturing is prohibited unless explicit authorization is granted by the ESA. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 1 hour ago

DEADLINE

Precision Fabrication of Wiring Harness BracketsThis subcontract opportunity is for the precision fabrication of wiring harness brackets to support DLA Weapons Support ASC projects. The selected provider will be responsible for the machining, bending, or stamping of metal bracket components in strict accordance with TDP Rev C Gen 3 and Reference Drawing 81755, including all required surface treatments. This is a total small business set-aside under NAICS code 332312 for the Department of Defense. Qualified contractors must possess CNC machining equipment and maintain ISO 9001:2015 certification. Due to the nature of the work, strict adherence to ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2/DFARS 252.204-7012 standards is mandatory. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Roof Canopy Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 39 Roof Canopy Assemblies for prime contractors supporting Department of Defense supply contracts. The work is managed through the DDSP New Cumberland Facility and requires all assemblies to be manufactured according to the technical specifications for NSN 5411014767136. The selected provider must perform rigorous quality assurance and inspections to ensure all units meet strict DLA technical requirements. Administrative requirements for this contract include active SAM registration and access to the Wide Area Workflow system. The project falls under NAICS code 332312, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Marine Hatch Assembly (NSN 2040015355766)This subcontract involves the manufacture or procurement of one Marine Hatch assembly under NSN 2040015355766 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring the assembly is produced from marine-grade materials and adheres to strict marking, labeling, and packaging standards as defined by MIL-STD-129 and MIL-STD-2073-1E. Compliance requirements are rigorous, necessitating adherence to ITAR and EAR export controls, as well as CMMC Level 2 and NIST SP 800-171 security assessments. The final deliverable is a single completed, packaged, and labeled marine hatch assembly. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture and Supply of Outside Platform ScissorsThis subcontract involves the manufacture and supply of 75 units of outside platform scissors for prime contractors working on DLA Troop Support projects. The items must be produced in strict accordance with Basic Drawing NR 98750 51D24865 (Rev M) and NSN 1730000308392, utilizing heavy-duty metal fabrication equipment to ensure all government technical specifications are met. The contract is issued by the Department of Defense under NAICS code 332312, with performance taking place in Tracy, California. Eligible providers must possess a valid UEI and CAGE code. Delivery of the 75 completed units is required under FOB Origin terms, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

Fabrication of Modular Storage and Transport FramesThis subcontract involves the fabrication of 20 modular storage and transport frames for prime contractors supporting Department of Defense supply contracts. The manufacturing process must strictly adhere to NSN 8145015120919 specifications and the DLA Master List of Technical and Quality Requirements (RA001), utilizing industrial metal fabrication equipment to ensure all units are modular and compatible for transport. The project is managed by Construction and Equipment Containers and will be performed at Fort Bliss. To be eligible, the provider must ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

Supply of Multiple Angle BracketsThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture or sourcing of Multiple Angle Brackets, specifically Part/NSN 7018894739, for prime contractors. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment. All materials must be packaged according to RP001 and ASTM D3951 standards and labeled in accordance with MIL-STD-129. The performance of this contract takes place in Fort Bliss, Texas, under NAICS code 332312. The contractor is required to deliver one completed and labeled bracket within 10 days of receiving an order. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of POLE ASSY, D2 SS (NSN 5411015299306)This subcontract involves the manufacture and supply of the POLE ASSY, D2 SS, identified by NSN 5411015299306, for prime contractors supporting Department of Defense supply contracts. The contractor is responsible for producing or sourcing the assembly using stainless steel and specialized tooling to ensure strict adherence to dimensions, tolerances, and the DLA Master List of Technical and Quality Requirements. The project is managed under the DDSP New Cumberland Facility with performance taking place in New Cumberland, Pennsylvania. All finished assemblies must be delivered to the designated DLA location within 167 days after the order is placed. The opportunity is categorized under NAICS code 332312.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Fabrication of A-Frame Support (P/N 1147-1)This subcontract involves the fabrication and assembly of one A-Frame Support, part number 1147-1 and NSN 3940-01-648-5873, for prime contractors supporting DLA Troop Support equipment contracts. The work must be performed in strict accordance with TDP Rev A Gen 1 and Tru-Hitch, Inc. design standards, with a specific prohibition against additive manufacturing unless prior authorization is granted. The project is managed under the Department of Defense and requires full compliance with the Buy American Act and DFARS 252.204-7012. Performance will take place in Ft Carson, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

More opportunities from California → Transportation and Public Works Department of City of Santa Rosa

Same awarding agency

Concrete ContractorThe Transportation and Public Works Department of the City of Santa Rosa in California is seeking a concrete subcontractor to construct structures for prime contractors on local government projects. The scope of work involves the forming and pouring of concrete pads and vaults, utilizing a mix that meets a minimum 28-day compressive strength of 4,000 psi. The selected contractor is responsible for performing the necessary 28-day compressive strength testing and delivering the completed structures. Qualified candidates must maintain valid DIR registration to be eligible for this subcontract. The solicitation was posted on October 6, 2026, and the deadline for responses is November 5, 2026, at 9:00 PM. This opportunity falls under NAICS code 238110.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Civil Site Work & Erosion Control ContractorThis subcontract opportunity with the Transportation and Public Works Department of the City of Santa Rosa involves providing comprehensive civil site work and erosion control services for local government projects. The selected contractor will be responsible for site preparation, selective demolition, and excavation and trenching activities performed in accordance with Caltrans Standard Specifications. Key deliverables include the implementation of water pollution control measures, the installation of silt fences and erosion control blankets, and the final restoration of surfaces. Interested parties must be registered with the Department of Industrial Relations to be eligible for this engagement. The solicitation was posted on October 6, 2026, and requires a response by November 5, 2026. This project falls under NAICS code 238910 and focuses on delivering fully prepared sites and excavated trenches to support prime contractors.

Site Preparation Contractors

POSTED

DEADLINE

Electrical Systems & MCC ContractorThis subcontract opportunity with the Transportation and Public Works Department of the City of Santa Rosa involves providing specialized electrical installation services for irrigation systems. The scope of work includes the installation of Motor Control Centers, Variable Frequency Drives, Soft Starters, and 4-20 mA flow meter electronics, as well as the implementation of grounding systems and stainless steel grounding rings. The selected contractor is responsible for delivering a fully operational electrical control system and providing stamped arc flash study reports. A critical requirement for this project is the engagement of a Registered Electrical Engineer in the State of California to complete the necessary study reports. Interested parties must submit their responses by November 5, 2026. This project falls under NAICS code 238210 and is designed for contractors capable of supporting prime contractors on local government infrastructure projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Well Pumping System Supplier & InstallerThe Transportation and Public Works Department of the City of Santa Rosa is seeking a subcontractor for the supply and installation of two submersible well pumping systems. The scope of work includes the removal of existing equipment and the installation of submersible pumps, water-filled rewindable squirrel-cage induction motors, column pipes, stainless steel check valves, and discharge heads. The selected contractor is responsible for performing factory pressure testing on motor assemblies to ensure the delivery of two fully operational systems. Interested parties must be DIR registered to qualify for this project. The solicitation was posted on October 6, 2026, with a response deadline of November 5, 2026. This subcontract falls under NAICS code 238220 and is intended for prime contractors working on City local government projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Irrigation Piping and Valve ContractorThe Irrigation Piping and Valve Contractor subcontract involves the installation, testing, and commissioning of irrigation piping and valve networks for prime contractors on City local government projects under the Transportation and Public Works Department of the City of Santa Rosa. The scope of work includes the installation of PVC, Ductile Iron, and Carbon Steel piping utilizing fabrication welding and gasketed bell ends, as well as the installation of liquid-filled pressure gauges and various valve types, including butterfly, gate, check, and air release valves. Qualified contractors must be DIR registered to deliver a fully installed and pressure-tested system. This opportunity is categorized under NAICS code 237110, with a response deadline set for November 5, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Bennett Valley Golf Course Irrigation System Improvements

Solicitation # C02471

The City of Santa Rosa, through its Transportation and Public Works Department, is soliciting bids for the Bennett Valley Golf Course Irrigation System Improvements project, contract number C02471. The scope of work involves providing all labor, materials, and equipment to install and test piping, valves, and hydraulic control components, as well as the removal of existing pumping equipment and the installation of two identical submersible well pumping systems. The project also includes specific concrete work with a minimum 28-day compressive strength of 4,000 psi and the application of shale surfacing meeting strict durability and compaction standards. All materials and equipment must adhere to AWWA, ASTM, IEEE, NEMA, and NEC standards, as well as California Electrical and Well Standards. The contract will be awarded to the responsible bidder who submits the lowest responsive bid. Bidders must provide a bid bond of 10% of the maximum bid amount, and the successful contractor will be required to provide performance and payment bonds for 100% of the contract price. The period of performance is 130 working days from the Notice to Proceed. Payment terms specify that the City will pay undisputed amounts within 30 days of receiving a complete monthly application for payment. The contractor must ensure compliance with California Labor Code prevailing wage requirements and the Americans with Disabilities Act. Bids must be submitted in a sealed envelope to Jose Mederos by the deadline of November 5, 2026, and bidders must be registered on the PlanetBids portal.

POSTED

DEADLINE

Glass Fiber and Resin FabricationsThis subcontract opportunity is for the fabrication, supply, and installation of Fiber Reinforced Polymer components for prime contractors working on City wastewater facility projects. The scope of work specifically involves the production and installation of glass fiber and resin components in strict accordance with Section 06610 standards. The project is managed under the Transportation and Public Works Department of the City of Santa Rosa in California. Interested parties must submit their responses by the deadline of November 10, 2026.

Glass Product Manufacturing Made of Purchased Glass

POSTED

DEADLINE

Specialized Piping and MechanicalThis subcontract opportunity, titled Specialized Piping and Mechanical, is issued by the Transportation and Public Works Department of the City of Santa Rosa in California. The project involves the installation of ductile iron and steel piping for prime contractors working on City wastewater facility projects. The scope of work requires the installation of piping, associated supports, and identification systems in strict accordance with Division 15 Mechanical requirements to deliver a fully completed piping system. The solicitation was posted on September 29, 2026, with a response deadline of November 10, 2026. Classified under NAICS code 238220, this contract focuses on specialized mechanical installation within public infrastructure. Interested parties can find further details through the provided PlanetBids portal link.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Industrial Painting and CoatingThis subcontract for Industrial Painting and Coating is issued by the Transportation and Public Works Department of the City of Santa Rosa in California. The selected contractor will be responsible for performing field painting and protective coating of metalwork for prime contractors working on City wastewater facility projects. The scope of work involves applying industrial grade paints and coatings to fabricated components and miscellaneous metalwork, ensuring all deliverables meet the requirements set forth in Section 09900 specifications. The opportunity is categorized under NAICS code 238320. Interested parties must submit their responses by the deadline of November 10, 2026. Further details and submission guidelines can be accessed through the provided PlanetBids portal link.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Clarifier Mechanical EquipmentThis subcontract for Clarifier Mechanical Equipment involves the supply and installation of specialized components for City wastewater facility projects managed by the Transportation and Public Works Department of the City of Santa Rosa in California. As a qualified specialty subcontractor, the selected party will be responsible for delivering fully operational clarifier drives and associated structural elements, including the influent feedwell, center column, center cage, and scum spray system. The project falls under NAICS code 238290 and requires the installation of specialized drive mechanisms and feedwell structures for prime contractors. Interested parties must submit their responses by the deadline of November 10, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

Instrumentation and Control (I&C) SystemThis subcontract opportunity with the Transportation and Public Works Department of the City of Santa Rosa involves the installation and integration of process control systems for wastewater facility projects. The selected contractor will be responsible for furnishing, installing, testing, and operating a comprehensive suite of instrumentation control and information systems, including measuring elements, signal converters, transmitters, local control panels, digital hardware and software, operator workstations, and remote telemetry units. The primary objective of the contract is the delivery of a fully operational instrumentation, control, and information system. Interested parties must submit their responses by November 10, 2026. The project falls under NAICS code 238210 and is designed to support prime contractors in ensuring the efficient management of city wastewater infrastructure.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Secondary Clarifier No 1 Rehabilitation Project

Solicitation # C01979

The Secondary Clarifier No 1 Rehabilitation Project, solicitation C01979, is issued by the City of Santa Rosa Transportation and Public Works Department. The scope of work involves the rehabilitation of Secondary Clarifier No 1 at the Laguna Treatment Plant, specifically focusing on the demolition, replacement, and resurfacing of the influent feedwell, center column, center cage, and rake arm truss system. Additionally, the contractor must install new vacuum tube straps and a scum spray system. The project must be fully completed within 90 working days from the start date, with a critical operational window required between November 1, 2027, and April 30, 2028. Bidders must be responsive and responsible, possessing the necessary California contractor licenses and the capacity to perform the work. Requirements include a 10 percent bid bond, and the successful awardee must provide performance and payment bonds for 100 percent of the contract price. Evaluation is based on compliance with the Iran Contracting Act for contracts exceeding 1 million dollars and the acquisition of a City business tax certificate within ten days of the award. Technical acceptance requires the solids collection mechanism to function properly with plant effluent for three consecutive days and biological treatment influent for five consecutive days, while scum removal equipment must operate without mechanical issues for 30 days. Payment is structured through monthly itemized applications for labor, materials, and equipment. The contract mandates adherence to prevailing wage requirements, ASCE 7 Chapter 13 seismic design standards, and strict water quality discharge regulations. All equipment exceeding 100 pounds must include lifting lugs, and specific piping identification standards for labeling and color-coding must be followed. Bids must be submitted in sealed envelopes to the Transportation and Public Works Department by the specified deadline.

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Truck Chassis Accessory Installation

POSTED

CLOSED

Metal Fabricator

City of Saint Paul

POSTED

CLOSED

Traffic Control Device Supply and Rental

POSTED

CLOSED

Temporary Modular & Folding Bridge Manufacturing

DCRFS - DCR Forestry / STIP

POSTED

DEADLINE

Custom Perimeter Fencing Manufacturing

Florida School for the Deaf and the Blind

POSTED

DEADLINE

Steel Decking Supply

Department of Conservation and Recreation

POSTED

DEADLINE

Modular Steel Bridge Manufacturing

Department of Conservation and Recreation

POSTED

DEADLINE

DCR 993 Temporary Steel Bridges

Solicitation # BD-27-1020-DCRFS-DC367-133428

DCRFS - DCR Forestry / STIP

POSTED

DEADLINE

Custom Aluminum Fish Distribution Tank Fabrication

Dnr750784 Castalia State Fish Hatchery Dnreri

POSTED

about 1 month ago

CLOSED

S70 LRV Center Truck Conical Springs Supplier

City Of Charlotte

POSTED

about 1 month ago

DEADLINE

Structural and Reinforcing Steel Supply

0H100 - HIGHWAY

POSTED

about 1 month ago

CLOSED

about 23 hours ago

Miscellaneous Metals & Coatings

City of Folsom Utilities Department

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS