Micro Jet Engine

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), solicitation number FA7000-10-T-0013 in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-37, October 14, 2009. The North American Industry Classification System Code [NAICS] is 336412 and the size standard is 1,000 employees. This is an unrestricted acquisition. All responsible sources may submit a quote, which if received timely, will be considered by the 10th Contracting Squadron, USAF Academy (USAFA). Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this combined synopsis/solicitation could result in the quote being ineligible for award. It is the offeror's responsibility to ensure their quote meets all the requirements identified herein. The USAF Academy has a requirement to purchase a Micro Jet Engine of approximately 120 lbs of thrust with the salient characteristics provided in the paragraph below. The Combat Aerodynamics Modular Prototype UAS (CAMPUS) uninhabited aerial vehicle (UAV) is an experimental research aircraft. The CAMPUS UAV was delivered to the USAF Academy with an Advance Microturbines AT-1200 turbojet engine rated at 100 lbs static thrust. This engine delivered only 60 lbs of thrust on the test stand and experienced rapid degradation of its mechanical integrity. The US Air Force Academy has determined the following characteristics to be the only suitable features that will provide the functionality that is required. The offeror's quote must posses the below listed characteristics: REQUIRED SALIENT CHARACTERISTICS: System Requirements: Turbojet or turbofan engine burning JP 8 or Jet A or kerosene. Nominal rated static thrust greater than 120 lbs. Maximum weight less than 30 lbs. Minimum Equipment: - Jet engine components - Engine Control Unit - Electric Starter - Fuel pumps and other accessories required to run the engine in an aircraft - Any other components or devices required to run the engine in an aircraft - Software and signal processors if required - Documentation / Manuals If an offeror believes they have an equal product which meets all the features and functionality of the items listed above, they may submit a quote for that product. It will be evaluated for technical acceptability. If it is determined by the Government to be an equal product it will be evaluated along with all other technically acceptable offers. If it is determined by the Government not to be an equal product, the offer will not be considered for award. REQUIREMENTS FOR QUOTE Prices quoted must be Firm-Fixed Price to include shipping and handling charges based on F.O.B Destination. Item Unique Identification (IUID) applies to this acquisition (see DFARS clause 252.211-7003 below). Buy American Act and certification of compliance is required and must be submitted with quote (see DFARS clause 252.225-7001). Provide pricing for each of the following line items: LINE ITEM 0001: Description Qty Unit Price Extended Price Micro Jet Engine 1 $_________ $____________ Item Unique Identifier (IUID) 1 $_________ $____________ TOTAL PRICE $ _________________ The following Federal Acquisition Regulation (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, tax identification number, size of business, and warranty information. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. The provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items , must be completed. Offerors are highly encouraged to complete all representations and certifications electronically on line at (http://orca.bpn.gov/publicsearch.aspx). If not completed on-line, 52.212-3 shall be completed in hard copy and submitted with quote. DFARS 252.225-7000, Buy American Act-Balance of Payments Program Certificate (attachment 1), must be completed, signed and returned with quote. The certificate can also be obtained at http://farsite.hill.af.mil/). In accordance with FAR 52.212-4(t), Central Contractor Registration (CCR) contractors must be registered with CCR to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration. (www.ccr.gov) Quotes must be received no later than 12:00 pm Mountain Standard Time, December 8th, 2009 at 10 LGC/ LGCB, Attn: Karen Jackson, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Quotes may also be submitted by e-mail to the Primary POC or by fax to +1 (555) 000-0000. Questions and responses should be addressed to the Primary POC Karen Jackson, Contract Specialist, USAF Academy +1 (555) 000-0000, contact@example.gov. Alternate POC is Elizabeth Lawson, Contracting Officer, +1 (555) 000-0000, contact@example.gov. Offers received after this date and time will be considered late in accordance with 52.212-1(f) and will not be evaluated. The provision at FAR 52.212-2, Evaluation--Commercial Items apply to this acquisition. The Government will award a contract resulting from this solicitation to the responsive responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate offers: Offeror must identify how they intend to comply with the IUID requirement, i.e., what method of marking will be used. Award will be made on the basis of determining the technically acceptable offer with the lowest evaluated price which meets or exceeds the requirements. Once an offer has been determined to be technically acceptable then the Offeror with the lowest evaluated price will be awarded the contract. If an offer is not technically acceptable it will not be considered; this includes failure to comply with IUID requirement. The following clauses apply to this acquisition. The clause at FAR 52.212-4, Contract Terms and Conditions--Commercial Items, with the following addenda, applies: Addendum to FAR 52.212-4(c) Changes Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b)) (End of Addendum) FAR 52.252-2 Clauses Incorporated by Reference: This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) applies to this acquisition. Additional FAR clauses cited in the clause applicable to this acquisition are: 52.222-3 Convict Labor (Jun 2003) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (Aug 2007) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (Mar 2007) 52.222-36 Affirmative Action for Workers with Disabilities (Jun 1998) 52.222-50 Combating Trafficking in Persons (Aug 2007) 52.225-13 Restrictions on Certain Foreign Purchases (Feb 2006) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) DFARS 252.212-7001, Contract terms and Conditions required to implement status of Executive Orders applicable to Defense Acquisitions of Commercial Items (Apr 2007) applies to this acquisition. Additional DFARS clauses cited in the clause applicable to this acquisition are: 252.225-7001, Buy American Act and Balance of Payments Program (June 2005) and 252.232-7003, Electronic Submission of Payment Requests (Aug 2007). DFARS 252.211-7003 ITEM IDENTIFICATION AND VALUATION (AUG 2008) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code). "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number _N/A___. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-(i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 5352.201-9101 OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kelly Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number +1 (555) 000-0000 FAX +1 (555) 000-0000 email: contact@example.gov Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number +1 (555) 000-0000, facsimile number +1 (555) 000-0000. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) USAFA 5352.242-9000, Contractor Access to Air Force Installations (USAFA Supplemented JULY 2008) applies to this acquisition. (a) Per Air Force requirements, the contractor shall obtain base identification for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. ADDED: All contractor employees shall comply with United States Air Force Academy (USAFA) security requirements while on the installation. USAFA security needs are supported by both military personnel and contractor employees. (1) Added: At the USAFA, contractor personnel are required to obtain Contractor Access Badges (CABs). CABs are only applicable to contractor employees performing duties requiring weekly access to the installation for a period of time exceeding 7 days. If required access is less than 7 days, the process to obtain access is via application for an AF Form 75, Visitor Pass. Both CABs and Visitor Passes are issued at the Pass and Registration Center (PRC) located at the south entrance to the USAFA. (2) Added: All references to contractor in this clause include the prime contractor and all subcontractors. (3) Added: Vehicle Usage (i) Contractor vehicles delivering food or water onto the installation are subject to inspection at entry control points. Vehicles making food and water deliveries on the installation will secure their vehicles when not attended to prevent unauthorized access and potential tampering. Vehicles making deliveries off the installation prior to arriving at the USAFA will ensure delivery vehicles remain locked when not attended. Failure to comply with these requirements may result in termination of vehicle access privileges. (ii) Contractors filling water trucks on the installation are only authorized to fill trucks from the non-potable hydrant outside Bldg 8034 and non-potable reservoir #3. The approved potable location is from the hydrant south of Bldg 8124, Snow Barn. Exceptions to these locations can be approved by 10 CES after coordination with 10 SFS. Any location where contractors are filling water trucks will have a back-flow preventor installed. (4) Added: Security Requirements. The contractor shall adhere to the installation security requirements as provided for in AFI 31-601, Industrial Security Program Management, USAFA supplement Chapter 2,Para 2.3 and 2.4; Chapter 7, Para 7.3; and Chapter 8) AFI 10-245, Air Force Antiterrorism (AT) Standards (Paragraphs 2.22, Atch 3), DoDI 2000.16, Department of Defense Antiterrorism Standards, Paragraphs E3.18 and E3.25). (i) Antiterrorism (AT). During increased Force Protection Conditions (FPCONs), entry requirements to the installation may change with little to no notice. During FPCON Charlie, contractors without a "C" on their CAB may be denied access. Depending on the incident or threat, all personnel to include contractors may be denied access to the installation for safety/security reasons. (I) Contractors are subject to spot checks or inspections of their vehicles and personal items at entry control points or facility access points during higher threats or during random antiterrorism measure checks. Failure to comply with these added security measures may result in denial of access to the installation. (II) Contractors are encouraged to receive Antiterrorism Awareness Training annually available at no cost, but it is not required in CONUS. Installation, Mission Element or the Unit Antiterrorism Representative (ATR) can provide this training when requested. Contractors can play an important role in protecting the installation and are encouraged to report suspicious activity to Security Forces by either calling 911 during emergencies or 333-2000. (ii) Operations Security (OPSEC): As applicable based on the scope and nature of the contract, the contractor shall comply with Government OPSEC guidance and training as prescribed in AFI 10-701, Operations Security, Chapter 4, paragraph 4.1 and AFI 33-332, Privacy Act, for handling of For Official Use Only (FOUO) information and HQ 10 ABW/CC Memorandum, USAFA Operations Security (OPSEC) Policy. Government provided OPSEC training is offered at no charge to the contractor. The contractor shall notify the applicable Unit OPSEC representative of the using activity receiving the contracted support, within one business day upon the discovery of any OPSEC violations (iii) Communications Security (COMSEC): The contractor shall comply with Government COMSEC requirements as contained in AFI 33-201V2, Communications Security, user requirements and USAFA COMSEC Manager guidance/directives. (5) Added: Prior to contractor employees providing services on the installation under this contract, the contractor shall validate that all contractor employees performing services on the installation are United States citizen or hold a valid resident alien status providing proof of alien registration with the Immigration and Customs Enforcement Service. (i) Background Checks. Prior to contractor personnel working on USAFA installation properties, the contractor shall agree that USAFA Security Forces may conduct a criminal history check, as applicable, on any or all employees performing on this contract. Criminal history checks may include accessing the appropriate state crime information center and national crime information center database to include, but not limited to, any state listed by the employee as current and past addresses. If this contract requires that any of the contractor's personnel must submit to a National Agency Check with Inquiries (NACI) background check, the Government shall bear the expense of that background check. Contractor employees found in violation of this process will be immediately removed from Academy grounds, are subject to barment, and will not be allowed to re-enter until completion of the CAB process. (ii) Convictions. Based on the results of the background check, any felony conviction in the past ten (10) years shall constitute indisputable grounds for the Contracting Officer (CO), with coordination from the 10th Air Base Wing Commander, to immediately require denial of access or removal of the employee from the effort under this contract. For felony convictions more than ten (10) years ago, the contractor may recommend the employee be retained on the contract. In addition, any misdemeanor conviction in the past five (5) years shall also constitute indisputable grounds, with coordination from the 10th Air Base Wing Commander, to restrict or immediately remove employees from effort under this contract. (I) Applicable convictions include: Murder; Assault with intent to commit murder; Espionage; Sedition (Conspiracy); Kidnapping or hostage taking; Treason; Rape or aggravated sexual abuse; Unlawful possession, use, sale, distribution, or manufacture of an explosive or weapon; Extortion; Distribution or intent to distribute a controlled substance; Illegal possession of a controlled substance; and Any felony conviction involving: Armed or unarmed robbery, Arson, Acts involving a threat, Willful destruction of property, Importation or manufacture of a controlled substance, Burglary or theft, Dishonesty, fraud, or misrepresentation, Possession or distribution of stolen property, Aggravated assault, Bribery, Violence at international airports (18 USC 37), or Conspiracy or attempt to commit any of the criminal acts listed above or any violations of immigration and naturalization laws. (II) Actions that involve restrictions or removal do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (iii) Warrants. If during the course of the CABs processing, any contractor personnel are found to have an outstanding warrant, Security Forces may detain the contractor employee and may notify the appropriate law enforcement authorities. The 10th Air Base Wing Commander may issue a barment letter based upon the gravity of the offenses surrounding a warrant. (iv) Barment. Employees removed by the CO may also be subject to barment from entering the USAFA. (I) Barment appeals are processed through 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (II) Individuals have 30 days from the date of the initial contractor access denial letter to submit a justification in writing to 10 SFS/S5B, along with any notarized copies of court documents or other documents they determine necessary to rebut the disqualifying information. (III) In the case of a barment based on an outstanding warrant, the contractor may appeal the barment through the 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (IV) The CO may require the contractor to restrict the employee's use on this contract until the case is resolved. (V) Actions that involve barment do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (b) See USAFA implementation procedures below. (1) Added: The...