Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Labeling and Marking

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with MIL-STD-129 standards for the labeling and marking of military shipments, including the application of automated identification and data capture (AIDC) barcodes, hazard communication labels, and submission of material safety data sheets (MSDS) to ensure safe handling and storage throughout the supply chain. All marking procedures must meet rigorous Department of Defense specifications for legibility, durability, and data accuracy to support inventory management and logistics operations. The work is a subcontract tied to the FLUID HANDLING DIVISION under the Department of Defense, with performance located in Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The North American Industry Classification System code 811211 indicates the work falls under institutional and commercial cleaning services, suggesting the labeling activity may be part of a broader support function for military logistics or equipment deployment.

General Info

Comply with MIL-STD-129 for AIDC labels and MSDS in Tracy, CA, for DoD logistics by August 6, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply MIL-STD-129 compliant markings, including AIDC bar-coding, hazard labels, and MSDS submission for shipment and storage.

Similar Contracts

Same NAICS industry code

Quality Inspection and Acceptance SupportThe contract entails the in-process and final inspection of gas seals using military sampling standards to verify adherence to technical specifications and quality benchmarks. This work is critical to ensuring the reliability and performance of components used in defense-related systems, with inspections conducted throughout production to catch deviations early and validate final product conformance. The scope is focused on compliance with stringent military requirements, requiring precise methodologies and documented evidence of acceptability for each batch or unit inspected. The contract is classified as a subcontract under the NAICS code 811211 and is managed by the Department of Defense under the organization name LAND SUPPLIER OPNS VEHICLE SPT. The place of performance is designated as Bremerton, Washington, with a zip code of 98314-6001. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, indicating a narrow two-week window for submission. All work must align with the defined military standards and be completed within the specified location to meet the requirements of the broader defense supply chain.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Medical Item Labeling and Bar-Coding ServicesThis contract requires the precise application of regulatory-compliant labels to every medical unit and shipping container, adhering strictly to Defense Logistics Agency standards. Each label must include critical identifiers such as the National Stock Number, Commercial and Government Entity code, lot number, expiration date, and machine-readable barcodes to ensure traceability and compliance throughout the military supply chain. The work must be performed at the designated place of performance in Fort Bragg, North Carolina, with all labeling operations meeting exact specifications to support DoD inventory and distribution systems. The solicitation is classified as a subcontract under NAICS code 811211 and is open for responses until August 3, 2026. It is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with no set-aside designation specified. Interested parties must submit their proposals via the provided DIBBS portal before the deadline to be considered for award, with an expectation that all labeling processes will align fully with federal and military regulatory requirements without deviation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Quality Assurance and Inspection SupportThe contract seeks a qualified provider to deliver comprehensive pre-shipment quality assurance and inspection support for defense-related fluid handling systems, ensuring full compliance with AS9003 or ISO 9001 standards. Responsibilities include conducting internal inspections, managing all documentation control processes, and coordinating factory acceptance tests to confirm product conformance prior to shipment. The work is structured as a subcontract under the Department of Defense’s Fluid Handling Division, with performance expected to meet rigorous aerospace and defense industry benchmarks for quality and traceability. All activities must be executed in alignment with established quality management systems to support mission-critical hardware delivery. The solicitation was posted on July 26, 2026, with a response deadline set for August 6, 2026, and is classified under NAICS code 811211, indicating a focus on repair and maintenance services for industrial machinery and equipment. The place of performance and specific office details are not provided, but the work is tied to defense supply chains requiring strict adherence to federal acquisition protocols. Interested parties must submit proposals through the DIBBS platform using the referenced solicitation number, and compliance with the stated quality standards is non-negotiable. No set-aside provisions are indicated, meaning the opportunity is open to all eligible subcontractors capable of delivering on the technical and regulatory requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract seeks specialized packaging, labeling, and marking services for medical devices in strict compliance with military standards, including requirements for MMS No. 1-compliant labels and comprehensive hazardous material documentation. All work must meet the rigorous specifications set by the Department of Defense to ensure the safe, accurate, and traceable handling of medical supplies in military and operational environments. The services are critical for maintaining regulatory compliance and readiness across defense medical supply chains. The contract is classified as a subcontract and is open for response until August 3, 2026, with work to be performed in Charlotte, North Carolina, at the zip code 28213-6200. It falls under NAICS code 811211, indicating a focus on medical and diagnostic laboratory services or related technical support activities. The contracting activity is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, and all proposals must adhere to the detailed standards outlined for military-grade packaging and labeling practices without exception.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Inspection and Acceptance at Origin (First Article & Final Inspection)The contract requires comprehensive first article and final inspections to be conducted at the contractor’s facility to ensure full compliance with specified technical and quality requirements. These inspections are critical for verifying conformance prior to government acceptance and are conducted under origin inspection protocols, meaning all evaluation occurs at the point of manufacture rather than upon delivery. The work is scoped to support formal acceptance by the government and must be executed in accordance with established standards without deviation. This subcontract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance centered at the location in Hampton, Virginia, zip code 23666-5027. The North American Industry Classification System code 811211 indicates the nature of the work relates to repair and maintenance services. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and is accessible via the DIBBS platform. No set-aside provisions or specific small business designations are provided, and the contract is open to eligible subcontractors capable of meeting the inspection and verification requirements at the contractor’s facility.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Grade Marking and Labeling ServicesThis contract requires the application of physical and container markings in strict compliance with MIL-STD-129 and RQ017 standards, ensuring all items are properly labeled for military logistics tracking. The work involves the placement of barcodes including SSCC and GTIN identifiers, as well as hazardous material labeling to meet regulatory and safety requirements. All markings must be durable, accurate, and fully aligned with Department of Defense specifications to support end-to-end supply chain visibility and handling. The performance location is designated as FPO with ZIP code 34091, and the work falls under NAICS code 811211, indicating it is a subcontract for repair and maintenance services. The solicitation is open for responses until August 6, 2026, and is managed by the Active Devices Division under the Department of Defense.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MIL-STD-129 Compliant Marking, Labeling, and BarcodingThe contract requires full compliance with MIL-STD-129 standards for external markings, barcoding, and handling labels on all delivered items. This includes accurately applying the contract number, lot or item number, and specific warnings related to PVT samples to ensure proper identification, traceability, and safety during transit and handling. All labeling must meet the detailed technical specifications of the military standard to guarantee uniformity and interoperability across defense logistics systems. The work is classified as a subcontract under NAICS code 811211, and the solicitation is managed by the ACTIVE DEVICES DIVISION within the Department of Defense. The response deadline is August 1, 2026, with the solicitation posted on July 24, 2026. There is no specified place of performance or point of contact listed, and the contract does not indicate a set-aside classification. All work must be completed in accordance with the referenced standard to meet DoD logistics and supply chain requirements.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Small Business Subcontracting and Payment Acceleration SupportSmall businesses are invited to participate as subcontractors under a total small business set-aside, leveraging accelerated payment terms enabled by FAR 52.232-40 to improve cash flow and operational agility. This opportunity is specifically aligned with the NAICS code 811211 and is managed by the Department of Defense through the Maritime Supply Chain agency, with performance required in Tracy, California, at the zip code 95304-5000. The solicitation is open for a brief five-day window, closing on July 29, 2026, and is exclusively reserved for small businesses as defined by SBA standards, ensuring eligibility is strictly limited to qualified concerns. Participation requires adherence to federal subcontracting guidelines and the implementation of accelerated payment provisions to facilitate timely compensation upon invoice submission. While no point of contact is listed, interested parties can access full details via the provided DIBBS link to prepare and submit responses prior to the deadline.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Quality Assurance & Inspection ServicesThis contract requires the provision of comprehensive quality assurance and inspection services to ensure compliance with military standards for defense-related components. Key duties include conducting in-process and final inspections covering dimensional verification, material compliance, and IUID validation to confirm that all items meet specified technical and regulatory requirements. Contractors will also be responsible for supporting the accurate completion of DD Form 250, the official documentation for government property delivery. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it falls under NAICS code 811211 which pertains to other miscellaneous repair and maintenance services. The place of performance is identified as Pensacola with a zip code of 32508, indicating the work must be executed at or near this location under the oversight of the Department of Defense’s FA3020 82 Cons Lgc office. Proposals must be submitted by July 30, 2026, by 6:00 PM Eastern Time, with the solicitation posted on July 24, 2026.

FA3020 82 Cons Lgc

POSTED

DEADLINE

Preventative Maintenance and Repair of GE Imaging EquipmentThe contract covers annual preventative maintenance and on-demand repair services for GE medical imaging systems including the XR Precision 500D, Definium 656 HD, and CT Revolution Frontier at Department of Veterans Affairs facilities in Cheyenne, Wyoming, and Northern Colorado. Services are required to ensure continuous operational readiness of these critical diagnostic tools, with a focus on minimizing downtime and maintaining compliance with clinical and safety standards. The work is structured as a subcontract under the Network Contract Office 19, with performance expected to meet strict reliability and response time benchmarks for urgent repairs. The solicitation was posted on July 24, 2026, with proposals due by July 31, 2026, and the NAICS code 811211 identifies it as a medical equipment repair and maintenance service. While no specific set-aside classification or point of contact details are provided, the place of performance is clearly defined to serve VA locations in the specified geographic region. The contractor must be capable of supporting multiple complex imaging modalities with certified technicians, spare parts availability, and adherence to federal healthcare procurement standards without reliance on vendor-specific warranties or direct manufacturer support.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Warranty & Maintenance ServicesThis contract establishes a one-year parts-and-labor warranty with an 8-hour response time for all support calls and a guaranteed 48-hour shipment of replacement parts to ensure minimal downtime. The service commitment is tied to the maintenance and repair of equipment under the scope of the subcontract, with performance obligations centered around rapid technical support and timely part delivery. The work is to be performed in Saint Louis, Missouri, at the zip code 63106, and falls under the NAICS code 811211, which corresponds to electronic and precision equipment repair and maintenance. The contract was posted on July 24, 2026, with a response deadline of August 7, 2026, and is administered by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15. The subcontract is not set aside for any specific small business category, and no point of contact information is provided in the listing.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Remedial Repair Services for Laboratory EquipmentThe contract seeks qualified vendors to deliver on-site remedial repair services for failed laboratory equipment, encompassing diagnostic assessment, parts replacement, and post-repair validation to ensure full operational restoration. Services must include emergency response capabilities outside standard business hours to minimize downtime and maintain the integrity of critical laboratory workflows. Work is to be performed at a designated location in Summit Argo, Illinois, with all repairs conducted in compliance with industry standards and equipment manufacturer specifications. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated for businesses certified under the SBA program, and is classified under NAICS code 811211 for electronic and equipment repair services. Proposals are due by July 31, 2026, and the solicitation was posted on July 24, 2026, under the agency authority of the FDA Office of Acquisition and Grant Services within the Department of Health and Human Services.

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of robust cybersecurity measures to safeguard covered contractor information systems handling Controlled Unclassified Information, in full compliance with DFARS 252.204-7012 and the security requirements outlined in NIST SP 800-171. The scope encompasses all phases of the project, including design, testing, and delivery, ensuring that CUI is protected at every stage with defined access controls, incident reporting protocols, and system integrity safeguards. The contractor must establish and maintain a security posture aligned with federal standards to prevent unauthorized access, disclosure, or modification of sensitive data throughout the lifecycle of the work. This is a subcontract under the Department of Defense’s Fluid Handling Division, classified under NAICS code 541512 for computer systems design services. Response submissions are due by August 6, 2026, and the solicitation is posted on the DIBBS platform with the reference number SPE7M426T285N. While specific performance locations and point of contact details are not provided, the obligation to meet all CUI safeguarding requirements is mandatory and applies regardless of where the work is performed. The contract demands full adherence to NIST controls and immediate reporting of any security incidents affecting CUI, with failure to comply potentially resulting in contract termination or penalties.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of hose assemblies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all items are maintained in a clean and dry condition throughout the process. It mandates the use of AE method preservation techniques, proper palletization to safeguard integrity during transport and storage, and adherence to MIL-STD-129 labeling requirements for accurate identification and tracking. All work must meet military-grade specifications to ensure long-term readiness and operational reliability under demanding conditions. This is a subcontract opportunity issued by the Fluid Handling Division under the Department of Defense, with a response deadline of August 6, 2026, and a posting date of July 26, 2026. The NAICS code 493190 indicates the nature of the work relates to other warehousing and storage activities, though the precise location of performance is unspecified. The solicitation is accessible via a DIBBS portal link, and interested parties must submit proposals by the stated deadline to qualify for consideration under this defense-related procurement.

Other Warehousing and Storage

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for hose assemblies in accordance with FAR 52.209-3/4, encompassing material composition, dimensional accuracy, performance under operational conditions, and environmental resilience testing. All testing must be conducted with meticulous attention to specifications, and a formal, comprehensive report must be submitted to verify compliance with all required standards. The work falls under NAICS code 541380 and is structured as a subcontract under the FLUID HANDLING DIVISION of the Department of Defense, with proposals due by August 6, 2026. The testing must be completed to ensure the hose assemblies meet military-grade reliability and quality benchmarks before production or deployment.

Testing Laboratories and Services

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThe contract requires the manufacture of nonmetallic hose assemblies meeting the stringent military specification MIL-DTL-6615J, with a specific NSN of 4720002029618 and part number M6615-I-A5000P. These assemblies must include reattachable couplings and demonstrate reliable performance under low-temperature conditions, ensuring operational effectiveness in demanding environmental applications. The product must adhere strictly to the technical and quality standards outlined in the military specification to guarantee compatibility, durability, and safety in defense systems. This is a subcontract opportunity issued by the Department of Defense’s Fluid Handling Division, with a North American Industry Classification System code of 326220 for rubber and plastic product manufacturing. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal using the provided link. Bidders must ensure full compliance with the specification requirements and be prepared to deliver finished assemblies that are certified and traceable to the defined military standards.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Supply of Specialty Materials for Fabrication and PackagingThe contract entails the supply of specialty metal alloys and preservation and cushioning materials essential for fabrication processes and military-grade packaging, with strict adherence to military specifications and full traceability throughout the supply chain. All materials must meet exacting standards for performance, durability, and environmental resilience, ensuring compatibility with defense and tactical applications. The requirement emphasizes compliance with verified documentation and quality controls to support readiness and logistical integrity in field operations. Subcontractors are invited to respond by August 6, 2026, with the performance location fixed at Tracy, California, 95304-5000. The North American Industry Classification System code 331492 indicates the involvement of other base metal product manufacturing, and the contracting entity is the Fluid Handling Division under the Department of Defense. While no set-aside or organization type is specified, the solicitation is formally issued under a subcontracting framework tied to broader defense procurement objectives, with full details accessible via the DIBBS portal.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

DEADLINE

Hazard Communication Compliance & LabelingThe contract seeks specialized services for the preparation of hazard warning labels and Material Safety Data Sheets (MSDS/SDS) for hazardous materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 marking standards. This work is critical for maintaining regulatory adherence in handling, storing, and transporting dangerous substances, with precise formatting, language, and visual elements required to meet both federal safety and military specification requirements. The deliverables must be accurate, consistently formatted, and capable of being integrated into existing logistics and inventory systems used by the Department of Defense. The contract is classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services, and it is being managed by the Fluid Handling Division within the Department of Defense. Performance is required to be conducted at Tracy, California, with a ZIP code of 95304-5000, and proposals must be submitted by the deadline of August 6, 2026. This opportunity is open to qualified subcontractors meeting the technical and compliance criteria, though no set-aside criteria have been specified. Interested parties can access the full solicitation through the DIBBS system using the provided link.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the packaging and palletizing of pipe assemblies to meet Military Standard MIL-STD-2073-1E and DLA RP001 specifications, ensuring full compliance with federal defense packaging protocols. Preservation must be executed using the BL/1 Blister/Dry method, which provides moisture-resistant protection suitable for long-term storage and transportation in demanding environments. Unit load design is mandatory to ensure stability, handling efficiency, and safety during transit, with all components properly secured and labeled according to military logistics requirements. The work is to be performed at Tracy, California, with a zip code of 95304-5000, and falls under NAICS code 493190 for other support activities for transportation. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with a response deadline of August 6, 2026, and posted on July 26, 2026. No set-aside type is designated, and the procurement is open to qualified subcontractors capable of meeting stringent military packaging standards. The place of performance is fixed, and compliance with all technical, procedural, and documentation requirements is non-negotiable. Interested parties must review the full solicitation via the provided DIBBS link to ensure alignment with all specifications and submission guidelines.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Metal Fabrication of Pipe AssemblyA single metal pipe assembly must be manufactured to strict military specifications, ensuring precise dimensional accuracy, verified material composition, and full compliance with fluid handling performance standards. The contract calls for end-to-end fabrication of this high-integrity component, requiring adherence to technical and quality benchmarks that align with defense system requirements. The work is to be performed at a designated location in Tracy, California, with the ZIP code 95304-5000, and all deliverables must meet or exceed the technical controls outlined for fluid system applications. This subcontract solicitation, issued by the Department of Defense’s Fluid Handling Division, has a response deadline of August 6, 2026, and was posted on July 26, 2026. It falls under the NAICS code 332996 for Other Miscellaneous Fabricated Metal Product Manufacturing, indicating its niche and specialized nature within the defense supply chain. There is no set-aside classification specified, and the contract does not indicate any specific restrictions on bidder eligibility beyond adherence to the technical and compliance requirements. Interested parties must submit proposals through the official DIBBS portal prior to the deadline.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Domestic and International Transportation ServicesThe contract encompasses the transportation of packaged defense components to Joint Base Elmendorf-Richardson in Alaska under FOB Origin terms, meaning the supplier is responsible for loading the goods onto the initial carrier at the point of origin, after which the risk and cost transfer to the recipient. All transportation must comply with DFARS 252.247-7023, which mandates the use of U.S.-flag vessels for ocean freight unless a formal waiver is granted, ensuring adherence to U.S. maritime regulations and national security requirements. The scope includes both domestic and international movement of these sensitive defense items, requiring careful coordination and documentation throughout the supply chain. The contract is categorized as a subcontract with a NAICS code of 483112, indicating it relates to truck transportation for remittance purposes, though it may involve multimodal logistics including ocean and land segments. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is issued by the Fluid Handling Division under the Department of Defense. The performance location is clearly designated as JBER, AK with a ZIP code of 99505-0000, and all logistics must be planned to meet the timeline and regulatory constraints inherent to defense logistics, particularly those governed by federal acquisition regulations.

Deep Sea Passenger Transportation

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging and marking services for defense components strictly aligned with military standards including MIL-STD-2073-1E for packaging, MIL-B-117 for material handling, and MIL-STD-129 for labeling, with full compliance in the generation of associated documentation and labels. All work must be executed to ensure the integrity, traceability, and readiness of defense materiel through standardized procedures that meet U.S. Department of Defense regulations. The services are subcontracted under the NAICS code 323111 and must be performed at the designated location in JBER, Alaska, with a ZIP code of 99505-0000. The contract is issued by the Fluid Handling Division under the Department of Defense and is solicited as a subcontract with no set-aside classification. Responses are due by August 6, 2026, and the solicitation was posted on July 26, 2026, with further details available through the official DIBBS portal.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThe contract requires the manufacture of a precision metal tube assembly with a 1.625-inch outer diameter and a 0.049-inch wall thickness, engineered to meet stringent DLA technical specifications. Production must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring compliance with defense logistics standards. The quality system must be certified to AS9003 and ISO 9001, affirming rigorous control over material selection, dimensional accuracy, and process consistency throughout fabrication. Performance is designated for JBER, Alaska, with the final product expected to support mission-critical fluid handling systems under Department of Defense oversight. The opportunity is structured as a subcontract under NAICS code 332996 and was posted on July 26, 2026, with a response deadline of August 6, 2026. No set-aside designation or organization type is specified, leaving eligibility open to qualified subcontractors capable of meeting the technical, packaging, and quality requirements. All proposals must be submitted through the DIBBS platform using the provided solicitation link, and adherence to the exact dimensional and regulatory criteria is mandatory for consideration. Failure to comply with any specification will result in disqualification.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE