Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the packaging and preservation of seal kits in strict compliance with MIL-STD-2073-1E standards, ensuring that all items are protected against environmental degradation through the use of waterproof bags, UV-resistant materials, and secure barcoding for traceability and inventory management. The work must be performed with precision to meet military-grade requirements for durability, contamination control, and long-term storage readiness, with each step documented to maintain compliance throughout the preservation process. This is a subcontract opportunity issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 7, 2026. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities, though the scope is specifically focused on military packaging services. There is no designated set-aside status, and performance location details are not specified, but contractors must be fully equipped to handle defense logistics and supply chain protocols under stringent federal standards.

General Info

Pack seal kits to MIL-STD-2073-1E using waterproof, UV-resistant materials with barcoding for defense logistics.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging and preservation of seal kits per MIL-STD-2073-1E, including use of waterproof bags, UV protection, and barcoding.

Similar Contracts

Same NAICS industry code

Signage and Branding ProductionThe contract titled Signage and Branding Production encompasses the design and installation of professional event signage for a Department of Defense event in Fort Worth, Texas, with a zip code of 76102. It includes the creation and setup of directional signs, sponsor booths, session room identifiers, and comprehensive branding materials such as banners and backdrops, ensuring a cohesive and impactful visual presence throughout the event space. The work falls under NAICS code 323111, classifying it as commercial printing, and is issued as a subcontract under the W076 Endist Ft Worth designation. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 14, 2026, at 10:00 PM Eastern Time. There is no specified set-aside type or organization classification, and the place of performance is exclusively located in Fort Worth, where all signage must be fabricated and installed according to the event’s specifications. While no point of contact details are provided, the contract is accessible through the SAM.gov public portal for potential bidders seeking further information or submission guidelines.

W076 Endist Ft Worth

POSTED

DEADLINE

Military Marking, Labeling, and UID ComplianceThis contract requires permanent marking, barcode and RFID labeling services fully compliant with MIL-STD-129 and RQ017 standards, including specialized FAT labeling protocols to meet rigorous military identification requirements. The work must ensure each item is uniquely identified, traceable, and properly labeled using approved methods and materials to support logistics, inventory, and asset management across Department of Defense supply chains. All labeling activities must adhere to strict technical specifications for durability, readability, and data accuracy under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 323111 indicating it pertains to printing and related support activities. It is managed by the ASC Commodities Division of the Department of Defense and has a response deadline of August 8, 2026. The place of performance and point of contact details are not specified, but the work is expected to support federal military logistics infrastructure with no geographic restrictions indicated. Interested parties must submit proposals through the DIBBS portal before the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Safety and Compliance LabelingThe contract requires the production and installation of durable labels compliant with OSHA and NFPA standards for use in fluid identification, pump operations, safety warnings, and unit identification. These labels must be engineered to withstand harsh environmental conditions and maintain legibility over time, ensuring continuous safety and regulatory compliance across operational settings. The work involves precise application techniques and material selection to meet federal safety requirements, with all deliverables subject to strict quality control to prevent misidentification or operational hazards. This is a subcontract under the Department of Transportation’s Hawaii office, with a solicitation posted on July 24, 2026, and a response deadline of August 15, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, specifically focusing on label manufacturing. Performance location details are not specified, but the labels must be suitable for deployment in DOT-related facilities in Hawaii. Bidders must demonstrate capability in manufacturing standardized safety labels and providing installation services that align with federal safety protocols, though no set-aside provisions or point of contact information is provided in the posting.

Department of Transportation

POSTED

DEADLINE

Blanket Labeling and Packaging ServicesThe contract requires the application of durable labels containing fiber content, NSN, contract number, and DDT warning on specified items, ensuring compliance with military labeling standards. Following label application, the items must be packaged in poly bags with eight units per carton, then palletized on 40x48 inch pallets and secured with shrink wrap according to military logistics specifications. All work must adhere to strict quality and documentation requirements to meet defense supply chain protocols. The contract is structured as a small business set-aside under SBA guidelines, with the NAICS code 323111 indicating it falls under printing and related support activities. The solicitation is managed by the Department of Defense through C AND T SUPPLY CHAIN and is open for responses until August 24, 2026, with performance expected to align with DoD logistics and distribution standards.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Military-Compliant Labeling and MarkingThe contract pertains to the production and application of military-standard labels requiring strict adherence to defense specifications, including data matrix codes for traceability, ESD warnings marked with Code '39' to ensure electrostatic discharge protection, and hazardous material labels compliant with established military safety protocols. All labeling must be fabricated and applied to meet rigorous environmental and durability standards suitable for defense equipment and systems used in operational environments. The work is classified as a subcontract under NAICS code 323111, indicating it involves printing and related support activities specifically tailored for military use. Performance is expected to support the ACTIVE DEVICES DIVISION of the Department of Defense, with the requirement submitted on July 24, 2026, and responses due by July 31, 2026. The place of performance is not specified, but compliance with all labeling standards and delivery timelines is mandatory to fulfill the subcontract obligation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Annual Contract for Elections Printed Forms and EnvelopesTarrant County is seeking vendors to supply printed forms and envelopes for absentee ballot mailings and other election-related communications, as mandated by the Texas Election Code. The contract is for a base term of twelve months, with the possibility of two additional twelve-month renewal periods at the County’s discretion, contingent on mutual agreement and timely submission of updated documentation prior to each option period. All pricing must be firm and fully inclusive, covering every associated cost including shipping, delivery, installation, and incidental expenses; no additional charges will be permitted after award. Vendors must accept purchase orders as the sole method of payment, and the solicitation includes a 30-day cancellation clause applicable to either party. Bids must strictly comply with all solicitation terms, and any attempt to impose additional legal agreements outside the procurement documents may result in disqualification. The contract is governed by Tarrant County’s local procurement policies, and no federal contracting clause numbering system is applied; instead, custom provisions govern core obligations. Vendors must ensure all materials meet U.S. Postal Service Election Mail guidelines, including proper barcode clear zones and postage markings, while also adhering to strict data security requirements. All sensitive election data must be protected under the CIA triad—confidentiality, integrity, availability—with strong encryption required both at rest and in transit. Vendors must designate a primary security contact, maintain audit logs, and report any data breach within 48 hours using both oral and written notification to Tarrant County’s Chief Information Security Officer. Audit rights are broad, permitting the County to examine systems, records, and subcontractors with reasonable notice, and vendors must submit annual compliance reports verifying log reviews and remediation actions. Data must remain within the 48 contiguous United States at all times, and any transfer outside this boundary requires prior written approval. Criminal background checks are mandatory for personnel accessing County data, with the County covering associated costs. Vendors must indemnify the County against third-party claims arising from their actions and cannot assign the contract without written consent. HUB/DBE participation is a key requirement, with bidders required to provide certification from recognized state or regional agencies, and failure to demonstrate good faith effort may render a bid non-responsive. Awards will go to the lowest responsive bidder meeting all technical and compliance criteria, with no trade-off evaluation permitted. Invoices must be submitted electronically or by mail to the County Auditor’s Office with the assigned purchase order number.

POSTED

DEADLINE

Shipping Container Marking and LabelingThe contract requires the precise and durable marking of shipping containers with specific military-compliant data, including NSN, CAGE code, part number, quantity, contract number, and handling cautions, ensuring all labeling meets established defense standards for longevity and readability under harsh conditions. The work must be performed to ensure full compliance with federal specifications for military shipping and logistics, with emphasis on accurate, high-visibility, and tamper-resistant application methods. This is a total small business set-aside subcontract under NAICS code 323111, issued by the Department of Commerce NOAA, with proposals due by August 4, 2026. The place of performance is specified as Grandview, Missouri, with a zip code of 64030, indicating the physical location where the marking services must be delivered. All contractors must be certified small businesses to be eligible, and the contract is open for submission through the SAM.gov portal.

Department Of Commerce Noaa

POSTED

DEADLINE

Printed and Digital Training Materials SupplyThe contract seeks the supply of printed and digital training materials including workbooks, handouts, binders, and USB drives for distribution to trainees and instructors under a subcontract arrangement. The materials are intended to support training activities managed by the Department of Defense through the Commander office, with performance required to occur in Albany, Georgia, at the specified zip code 31704. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities. Submission deadlines are firm, with responses due by 2:00 PM Eastern Time on July 29, 2026, and the opportunity was posted on July 24, 2026. All deliverables must meet specified quality and timing requirements to ensure seamless integration into ongoing training programs.

POSTED

DEADLINE

Barcoding and Labeling Compliance ServicesThe contract requires compliance with the Department of National Defence’s D-02-002-001/SG-001 standard for barcoding and labeling of military assets using UCC/EAN-128 symbology with Application Identifiers AI 241 for Product Stock Control Number or AI 7001 for National Stock Number. All labels must include both machine-readable barcodes and legible human-readable text, ensuring accurate identification and traceability across the supply chain. Labels must be durable, resistant to environmental factors, and capable of maintaining readability throughout the product’s lifecycle under operational conditions. This subcontract opportunity is open to qualified vendors capable of delivering labeling solutions that meet Canadian government defense specifications. The solicitation is tied to performance locations in British Columbia and Nova Scotia, with responses due by August 10, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, emphasizing the need for precision in label design, printing, and material selection. Compliance is mandatory, and failure to adhere to the outlined standards could result in rejection of deliverables or non-payment.

Department of National Defence

POSTED

DEADLINE

Printing and Bidding Document ReproductionThe contract entails high-volume printing and reproduction of bidding documents and construction packages, with specialized handling of large-format materials and professional binding services required to meet project specifications. Work must be executed with precision to ensure documents are accurate, legible, and properly assembled for distribution to contractors and stakeholders involved in public construction initiatives. The scope demands capability in managing large quantities of technical documentation under tight deadlines and quality standards suitable for governmental procurement processes. This is a subcontract opportunity under the NAICS code 323111, issued by the Michigan agency DTMB, with a posting date of July 24, 2026, and a response deadline of August 6, 2026, at 6:00 p.m. No set-aside designation is specified, and the place of performance and point of contact details are not provided in the data, though the work is tied to Michigan-based projects. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract encompasses the custom military packaging, marking, and labeling of seal caps in strict compliance with MIL-STD-129, FED-STD-313, and ASTM D3951 standards, including all required hazard communication labeling to meet federal military specification requirements. This work must be executed to ensure full interoperability and traceability within U.S. Department of Defense logistics systems, covering all stages from initial packaging through final labeling for shipment and delivery. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, aligning with SBA and FAR 19.5 guidelines. The North American Industry Classification System code is 323111, indicating the work falls under printing and related support activities. The solicitation was posted on July 23, 2026, with a deadline for responses set for July 28, 2026. The contracting activity originates from the Strategic Acq Program Directorate within the Department of Defense, though specific location details for performance, office address, or point of contact are not provided. The contract is accessible through the DIBBS system under the reference number SPE7LX26U8624, and all potential offerors must ensure adherence to all technical, regulatory, and compliance requirements outlined in the referenced military and industry standards. Failure to meet any labeling, packaging, or marking specification will result in non-compliance and potential disqualification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

GASKETThe contract is for the procurement of 102 gaskets identified by NSN 5330-01-068-4070 under solicitation number SPE7LX-26-U-9016, with a required delivery within 45 days after award. The specification incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date or award date depending on the acquisition size. All items must be free of asbestos, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements; any substitute materials must be approved unless explicitly authorized. The contract requires compliance with DLA packaging standards and mandates that government identification be removed from non-accepted supplies. The supplier must hold CMMC Level 2 certification assessed by a certified third-party organization. The solicitation was posted on July 26, 2026, with responses due by August 10, 2026, and the NAICS code is 339991. The contracting agency is the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

FILTER BODY, FLUIDThe contract is for the procurement of a FILTER BODY, FLUID with NSN 2910-01-581-6417 under solicitation SPE7LX-26-U-9020, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is set aside entirely for small businesses and specifies a quantity of 174 units to be delivered within 74 days under FOB origin terms, with no variance allowed in quantity. The item is subject to DLA’s Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, and all packaging must be labeled and palletized according to DLA-specific guidelines including the defined Unit of Issue and Quantity per Unit Pack. The contract includes delivery instructions, technical compliance mandates, and references to DLA’s official documentation for unit of issue conversions and procurement rules. The point of contact for inquiries is Theodore Misiolek, with a response deadline of August 10, 2026, and the solicitation was posted on July 26, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

TANK, FUEL, ENGINEThe contract pertains to the procurement of one unit of a fuel tank for engine applications under solicitation SPE7LX-26-U-9018, with a total quantity of 10 units at a unit price of $10.00, totaling $100.00. The item is identified by NSN 2910-01-575-5229 and is designated as a DLA Direct, CONUS delivery under a Total Small Business Set-Aside, with the NAICS code 336310 indicating classification within the motor vehicle body manufacturing industry. Delivery is required within 74 days FOB origin, with no tolerance for quantity variance—exactly 10 units must be delivered. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, while also adhering to the more stringent requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Palletization must align with DLA’s packaging procurement guidelines, and the Unit of Issue is each (EA). The contract emphasizes strict compliance with government packaging and labeling mandates, and all government identification must be removed from non-accepted supplies in accordance with RQ011. The point of contact for the contract is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate, and responses are due by August 10, 2026, with the solicitation posted on July 26, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

VALVE, BRAKE PNEUMATThe contract is for the procurement of 161 units of a pneumatic brake valve, identified by NSN 2530-01-576-9837 and part number BW 289714N, under solicitation SPE7LX-26-U-9024. This is a total small business set-aside with a NAICS code of 336340, and the delivery must occur within 75 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including preservative methods, material selection, and packaging codes, with marking conforming to MIL-STD-129. All packaging and shipping requirements adhere to DLA’s standardized guidelines, including those for hazardous materials, and palletization must follow DLA’s Procurement Packaging Requirements. The item is designated for direct DLA procurement within the Continental United States. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers incorporated by full text. Special marking is not required. The contract was posted on July 26, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via DLA email and phone. The unit of issue is each, and pricing details are included under CLIN 0001 at a unit price of $161.00, with total estimated value reflecting the full quantity. This solicitation is part of a broader DoD procurement process, and all referenced standards are binding and non-negotiable unless otherwise amended during the solicitation period.

Motor Vehicle Brake System Manufacturing

POSTED

about 19 hours ago

DEADLINE

RESERVOIR, PUMP ASSEThe contract specifies the procurement of a Reservoir, Pump Assembly with NSN 2530-01-577-6257 and part number 14-20823-000, for a quantity of 43 units under solicitation SPE7LX-26-U-9017, with a total contract value based on a unit price of $43.00 per unit. Delivery is required within 75 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA Direct, CONUS, and must be packaged per DLA’s mandated requirements, including adherence to MIL-STD-129 for marking and labeling, and TQ requirement IP025. If the material is non-hazardous per FED-STD-313, it must be commercially packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements override this standard. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and the Unit of Issue is each (EA), with Quantity per Unit Pack (QUP) specified as 001. The procurement is a total small business set-aside under NAICS code 336330, with a response deadline of August 10, 2026, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

FILTER, FLUIDThis contract pertains to the procurement of fluid filters with NSN 2940-01-559-1820 and part number 01542705, managed under solicitation SPE7LX-26-U-9022 for a total quantity of 228 units, each to be delivered within 62 days under FOB origin terms. The purchase is subject to a 0% variance in quantity, with inspection and acceptance occurring at the destination point. Packaging must conform to ASTM D3951 and MIL-STD-129 markings and labeling, with all packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements, which take priority. Unit of issue is each (EA), and palletization must align with DLA Packaging Requirements for Procurement (RP001). The contract is structured as a direct, CONUS delivery under DLA authority and falls under a Total Small Business Set-Aside, with the NAICS code 336390. The estimated quantity is non-binding, and the government is not obligated to purchase the full amount. The point of contact for inquiries is Theodore Misiolek, and responses were due by August 10, 2026, with the solicitation posted on July 26, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

SHAFT, STEERING COLUThis contract pertains to the procurement of a steering column shaft with part number WWS 38201-3484 and NSN 2530015775775, issued by the Defense Logistics Agency under solicitation SPE7LX-26-U-9023. The requirement is for seven units to be delivered within 75 days from the origin under FOB terms with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is a total small business set-aside classified under NAICS code 336330, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must comply with DLA’s RP001 requirements, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging if not hazardous, with hazardous items subject to Fed-Std-313 and TQ IP025. Palletization must follow DLA standards, and the unit of issue is each (EA) at a unit price of $7.00 for a total of $49.00. This is an estimated quantity that may not be fully purchased by the IDC.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

KIT, REPAIR, AIRCRAFThe contract pertains to a repair kit for aircraft, identified by NSN 5340-01-502-2923, with a quantity of twelve units required under purchase request 1000238234. Delivery is mandated within 116 days after award. Technical and quality specifications governing the item are defined by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE7LX-26-U-9019, issued on July 26, 2026, with responses due by August 10, 2026. The North American Industry Classification System code is 332722, and the contracting activity falls under the Department of Defense’s Strategic Acquisition Program Directorate. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all information can be accessed through the DIBBS portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

SEAL, PLAIN ENCASEDThe contract pertains to the procurement of a SEAL, PLAIN ENCASED item with NSN 5330-01-163-4619 and part number 530181, supplied by SKF USA INC., under solicitation SPE7LX-26-U-9021. The item is designated as a critical application product and is subject to strict packaging standards requiring medium-duty, waterproof, greaseproof, and opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the material to ultraviolet light exposure. This packaging mandate applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The item must be marked in compliance with MIL-STD-129, with no special marking required, and palletization must follow DLA packaging requirements. The contract prohibits the use of ozone-depleting chemicals and restricts intentional addition of mercury or mercury compounds except in specific functional components like batteries, fluorescent lamps, and instrument controls, which must include secondary containment per NAVSEA guidelines. Delivery is set for 97 days after award with FOB origin terms, and the quantity is fixed at 55 units with no variance permitted. Inspection and acceptance occur at the destination point. The unit price is $55.00, resulting in a total price of $3,025.00, though the quantity stated is estimated and may not be fully obligated. All technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. The contract is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

Logistics and Delivery ManagementThis contract involves managing FOB Destination deliveries to government sites under the Department of Defense, with a focus on full logistics compliance for defense operations. Key responsibilities include handling all aspects of shipment execution from origin to final destination, ensuring timely and accurate delivery to federal locations, and fulfilling required documentation through WAWF invoicing, real-time shipment tracking, and secure proof of delivery verification. The work must adhere strictly to defense logistics standards, emphasizing accountability, traceability, and timely reporting throughout the supply chain. The contract is classified as a subcontract under NAICS code 484121, indicating transportation by truck, and is issued by the Strategic Acquisition Program Directorate. While the solicitation number is not provided, the solicitation was posted on July 25, 2026, with responses due by August 12, 2026. Performance is required at unspecified government sites across the United States, and while location details are not outlined, compliance with defense logistics protocols is mandatory. There is no set-aside designation, and the contract does not specify a point of contact, leaving potential bidders to direct inquiries through the official DIBBS portal linked in the posting.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services specifically for battery shipments, ensuring compliance with stringent defense standards. This includes the use of humidity-controlled packaging to protect sensitive components, application of bar-coding for accurate tracking and inventory management, and adherence to all hazardous materials communication protocols to ensure safety and regulatory compliance throughout the supply chain. The work must meet exacting military specifications to safeguard personnel, equipment, and transport infrastructure. This is a subcontract opportunity under the Strategic Acquisition Program Directorate within the Department of Defense, with the NAICS code 561910 indicating it falls under Other Support Activities. The solicitation was posted on July 25, 2026, and responses are due by August 12, 2026. The place of performance is not specified, but the services will support defense logistics operations. All work must be delivered in alignment with DLA standards, and potential offerors should review the official solicitation at the provided UI link for complete technical and administrative requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Nonrechargeable Battery Power Supply Manufacturing and SupplyThe contract pertains to the manufacture and supply of nonrechargeable battery power supplies identified by NSN 6135-014612915 under an IDIQ framework with a total potential value covering up to 2,625 units over a five-year period, including base and option years. The work is being solicited by the Strategic Acquisition Program Directorate within the Department of Defense, with the North American Industry Classification System code 335911 indicating it pertains to other electrical equipment and component manufacturing. The solicitation is set to be submitted by August 12, 2026, and the contract is classified as a subcontract, though no specific set-aside or demographic preferences are indicated. All deliverables are expected to meet military specifications for performance, reliability, and durability under operational conditions, with the place of performance unspecified and no designated point of contact provided in the posting. The procurement is managed under the DLA's DIBBS system, and interested respondents must adhere to the submission deadline to be considered for award. The indefinite-delivery, indefinite-quantity structure allows the government to issue task orders as needed over the contract term, ensuring flexibility in procurement volume while maintaining a guaranteed supply chain for essential battery power units.

Storage Battery Manufacturing

POSTED

DEADLINE