Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military Packaging and Preservation Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the military-compliant packaging and preservation of heaters in accordance with MIL-STD-129 standards, ensuring proper protection for long-term storage and transport under demanding conditions. This includes the use of desiccants, vapor corrosion inhibitors, and sealed containers to prevent moisture, rust, and environmental degradation, along with precise labeling and documentation to meet strict military logistics requirements. All packaging processes must align with the Defense Logistics Agency’s protocols to guarantee readiness and traceability throughout the supply chain. This subcontract, awarded under the NAICS code 323111, is managed by the Department of Defense through the Defense Logistics Agency and is focused on supporting critical defense infrastructure. The work is tied to contract SPE8EG24D0003 with delivery order SPE8E826F0677 and has a posting date of August 5, 2026, indicating it is part of a forward-looking procurement cycle. Performance must adhere to exacting standards without deviation, and the packaging must support immediate deployment and extended storage without compromising equipment integrity or operational readiness.

General Info

Military-compliant packaging of heaters per MIL-STD-129 with desiccants, VCI, sealed containers, and precise labeling for DLA supply chain readiness.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8EG-23-R-0010.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HEATER, DUCT TYPE, PO

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Military-compliant packaging of heaters per MIL-STD-129, including preservation, labeling, and storage using desiccants, VCI, or sealed containers.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

2027 Recycling Calendars Printing & Mailing

Solicitation # 12492

The City of Greensboro is soliciting bids under event 12492 for the printing and mailing of approximately 80,000 to 82,000 two-sided color folded postcards for the 2027 Recycling Calendars. The project requires the production of 40,000 red and 40,000 blue calendars on 80# matte cover stock, which must be sealed with fugitive glue or wafer seals to comply with USPS automation mailing regulations. The selected contractor is responsible for processing the mailing lists to achieve the best USPS Marketing Mail rates, including NCOA and Class certification, and must ensure all postcards are mailed from a Greensboro USPS location by December 4, 2026. Any overruns of unaddressed postcards must be delivered to the Solid Waste and Recycling Department at 401 Patton Avenue. The contract will be awarded to the lowest responsive and responsible bidder. Interested companies must submit their responses via the Greensboro eProcurement System by September 24, 2026, at 2:00 PM EST. Required submission materials include a statement of qualifications, a sample of similar work, at least three references, a copy of the company's NCOA license, and a bid form covering printing, processing, mailing, and postage costs. Bidders must also provide a statement confirming the bid remains valid for three months and acknowledge all RFB addenda. The City also applies a Local Preference Policy for businesses within the Guilford County Economic Development Alliance area and maintains a strict non-discrimination policy for all contracted entities.

City of Greensboro

POSTED

about 20 hours ago

DEADLINE

Postcard Printing Services

Department of Driver Services

POSTED

about 21 hours ago

DEADLINE

POSTCARD PRINTING, MAILING AND FULFILLMENT

Solicitation # 47500-eRFQ-001991-2027

The Georgia Department of Driver Services is soliciting quotes under solicitation number 47500-eRFQ-001991-2027 for postcard printing, mailing, and fulfillment services. The request opened on September 11, 2026, with a response deadline of September 19, 2026. The contract features an initial one-year term from the date of award, with the state entity retaining the option to renew for four additional one-year periods. Qualified suppliers must demonstrate a minimum of five years of experience and provide documentation of prior client references. Evaluation criteria include supplier responsibility, integrity, and cost, with a specific preference granted to suppliers domiciled in the State of Georgia. Mandatory submission requirements include a completed cost worksheet, a Sales and Use Tax compliance form, a bid bond, and a proposal certification and certificate of non-collusion. Additionally, bidders must disclose any business litigation from the past five years and any history of suspension or debarment from government contracting. All responses must be submitted through the GA@WORK Marketplace.

Department of Driver Services

POSTED

about 21 hours ago

DEADLINE

Secure Card Manufacturing & Personalization

POSTED

about 22 hours ago

DEADLINE

in about 2 months

Card Production and Image Capture Services Provider

Solicitation # rfxx_20330

The Government of Ontario Ministry of Transportation is seeking a Card Production and Image Capture Services Provider under solicitation rfxx_20330. The scope of work encompasses the full lifecycle of end-to-end services, including image capture, secure card design, production, personalization, quality assurance, and distribution. The contract is structured around three primary categories of requirements: operational expectations for day-to-day service delivery, transition obligations for the assumption and transfer of services, and a governance model for oversight and accountability. The provider must manage sensitive personal and health information within a secure environment and adhere to strict quality and biometric standards, including ISO/IEC 14298-2021, ISO/IEC 7810, and AAMVA specifications. The selection process is based on a Best Score strategy across four stages. Stage 2 evaluates technical requirements, focusing on core production capabilities, supply chain security, and business responsiveness. Stage 3 involves demonstrations of image capture and card production use cases, requiring a minimum score of 75 percent to proceed. Stage 4 evaluates the commercial response using a relative pricing formula, with a price outlier rule that awards zero points if a bid exceeds the median price by more than 50 percent. The successful vendor must demonstrate experience in high-volume, secure public service environments, maintain a Canada-based operational footprint, and comply with Ontario's occupational health and safety and tax regulations. Delivery of produced cards is to be handled via Canada Post or other approved providers.

POSTED

about 22 hours ago

DEADLINE

in about 2 months

Commercial Printing - Multi-page Booklets

POSTED

about 22 hours ago

DEADLINE

Commercial Printing - Marketing Collateral

POSTED

about 22 hours ago

DEADLINE

ODP Printing Services

Solicitation # 1368

The State of Idaho, on behalf of the Office of Drug Policy, is soliciting bids under ITB 1368 for a contractor to provide ongoing, as-needed marketing, administrative, and operational printing services. The scope of work includes the production of various materials such as trifold and half-fold brochures, rack cards, four-page booklets, stickers, flyers, magnets, folders, posters, retractable banners, wall clings, and table tents. The resulting contract will be issued as a Blanket Purchase Order through the Luma ERP system. Award will be based on the lowest responsible bidder, with a 10 percent cost preference applied for evaluation purposes to bids produced outside the State of Idaho. Contractors must adhere to strict delivery timelines, finalizing specifications within two days of an order and delivering materials within five to ten business days. All shipments are F.O.B. Destination, with specific packaging requirements for booklets and stickers. The contractor must provide a minimum one-year warranty on all printed materials and maintain a maximum production overrun of 10 percent. Mandatory insurance requirements include Commercial General Liability with a 1 million dollar per occurrence and 2 million dollar aggregate limit, Commercial Automobile Liability of 1 million dollars, and Workers Compensation. Pricing must remain firm for the initial one-year term, with potential adjustments considered twice per year thereafter.

POSTED

about 22 hours ago

DEADLINE

Textbook Printing and Physical Production

FA3300 42 Cons Cc

POSTED

DEADLINE

Pub10050LSMedicareandYou2027LargePrintSpanish

Solicitation # Pub10050LSMedicareandYou2027LargePrintSpanish451846R1(2026)

The United States Government Publishing Office, specifically the Customer Services agency in Washington, DC, is soliciting bids for the production of the 2027 Large Print Spanish edition of Medicare and You. This combined contract requires comprehensive services including desktop publishing, proofing, 4 color printing at Quality Level III, binding, and shipping or mailing to various destinations. Interested parties must submit their responses by September 14, 2026. The project falls under NAICS code 323111 and is managed by primary point of contact Carey Joseph. Detailed specifications for this production requirement are available through the official GPO vendor portal.

Customer Services

POSTED

DEADLINE

TTP printed sleeves and inserts

Solicitation # 040ADV-25-R-0046

The United States Government Publishing Office is soliciting proposals for the production of Trusted Traveler Program printed sleeves and inserts to support the Government Secure and Intelligent Documents business unit. This procurement, identified by solicitation number 040ADV-25-R-0046, will be awarded as a single Indefinite Delivery/Indefinite Quantity contract featuring Firm-Fixed-Price delivery orders for commercial items. The selection process will utilize a best-value tradeoff method, evaluating both price and non-price factors to identify the most responsible offeror. Interested parties must submit their proposals by September 17, 2026. This opportunity is open to all qualified bidders as there is no specific set-aside designated for this contract.

Acquisition Services

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS