Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Mill Turn Machine for the Watervliet Arsenal

Active
W911PT26QA084-SolicitationFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a sole-source procurement issued by the Department of Defense through the Watervliet Arsenal in New York for the acquisition of one Mill Turn Machine, with an optional second unit, to support the arsenal’s cannon manufacturing process. The machine must be fully configured and installed in strict compliance with the Watervliet Arsenal Manufacturing Engineering Work Group Specification #01-26-3416 dated January 29, 2026. Although designated as sole-source, all responsible proposals are eligible for consideration, allowing qualified vendors to respond. The solicitation falls under NAICS code 333517 and carries no set-aside requirements, making it open to all eligible contractors. The procurement is managed by the W6QK Acc Wva office, with the primary point of contact being Coby Brickner, reachable by phone or email, and Lauren Scripps as the secondary contact. Proposals must be submitted by 8:00 PM Eastern Time on August 12, 2026, and the machine is to be delivered and installed at the Watervliet Arsenal location in New York with a ZIP code of 12189.

General Info

Sole-source procurement for one Mill Turn Machine, optional second, compliant with specification #01-26-3416, due August 12, 2026, at Watervliet Arsenal, NY.

Agency

Department Of Defense → W6QK Acc WvaView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

(6)

Mill Turn Machine Contract Data Requirements List DD Form 1423-E

PDF•contract-data-requirements-list

Solicitation W911PT26QA084 Mill Turn Machine Watervliet Arsenal

PDF•rfq

Mill Turn Machine Control System Requirements Sheet WVA Spec 01-26-3416

XLSX•specifications

Attachment 0002 - Mill Turn Machine Compliance Sheet WVA Spec 01-26-3416

XLSX•compliance-sheet

Specification for Mill Turn Machine - Spec. # 01-26-3416

PDF•specifications

Amendment 0001 to Solicitation W911PT26QA084

PDF•amendment

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Wva
Contacts2 people available
OfficeWATERVLIET, NY, 12189-4050, USA
Organization / Agency
Department Of Defense → W6QK Acc Wva
View Agency Profile
Office AddressWATERVLIET, NY, 12189-4050, USA
Contacts
Coby Brickner
contact@example.gov
+1 (555) 000-0000
Lauren A. Scripps
contact@example.gov

Full Description

Show more

THIS INTENDS TO BE A SOLE SOURCE PROCUREMENT WITH DMG MORI FEDERAL SERVICES.  ALL RESPONSIBLE PROPOSALS WILL BE CONSIDERED. 

This solicitation is for the procurement of one (1) Mill Turn Machine and an option for one (1) Mill Turn Machine in support of the Watervliet Arsenal Cannon Manufacturing Process. This machine base must be configured and installed in accordance with the Watervliet Arsenal Manufacturing Engineering Work Group Specification #01-26-3416 dated 29 Jan 2026 (Attachment 0001).

Similar Contracts

Same NAICS industry code

NAICS: 333517
New
DIBBS
EXPANDER, TUBE
Solicitation # SPE8E9-26-T-3301
This contract is for the procurement of 18 units of an adjustable tube expander with roller mechanism, specified as a one-piece round head mandrel with power operation, featuring a minimum inner diameter of 0.319 inches, a maximum tube sheet thickness of 0.750 inches, and three tapered rollers each 1.000 inch in length, without a flexible tip. The item is classified as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, specifically under R and I identifiers. Mercury or mercury-containing compounds are strictly prohibited in or in direct contact with the hardware except for functional uses in batteries, fluorescent lamps, specific instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The product must conform to MIL-E-15809D Technical Data Package Revision A General 1 and meet all applicable packaging, marking, and handling standards including MIL-STD-2073-1E for preparation and MIL-STD-129 for labeling, with no special marking required. Packaging must follow DLA procurement guidelines, with unit containment type D3, no cushioning or dunnage specified, and palletization in accordance with RP001 requirements. Delivery is required FOB origin within 167 days, with inspection and acceptance occurring at the destination, and no variance to quantity is permitted. The item is identified by NSN 3456-00-250-8752 and purchase request number 7017757341, priced at $18.00 per unit for a total of $324.00. The contract is issued under solicitation SPE8E9-26-T-3301, with a response deadline of August 17, 2026, and the original required delivery date set for October 19, 2028. The shipment must be addressed to DLA Distribution at the New Cumberland, PA facility, with transportation details governed by DLAD Proc Notes C19 and C20. The item falls under NAICS code 333517 and is procured by the Department of Defense’s Construction & Equipment MRO SVC I office, with Matthew
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
HUB AND SHEAVE ASSY
Solicitation # SPE8E6-26-T-4025
The contract is for the procurement of a HUB AND SHEAVE ASSY with NSN 3415-01-436-6633 and part number 23V1060SK & SK1 3/8 5/16, supplied by Emerson Electric Co Browning Mfg. The quantity required is 13 units, each priced at $13.00, for a total value of $169.00. Delivery must be made FOB origin within 167 days from the contract date, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, cushioning, and unit containerization. Marking must adhere to MIL-STD-129 with no special marking codes, and palletization follows DLA guidelines. The delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and shipping must follow DLAD Proc Note C19 and C20 for transportation logistics. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for specific functional uses approved by NAVSEA such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents. Portable devices containing mercury must be shock-proof and equipped with a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. The procurement action is under solicitation SPE8E6-26-T-4025, which was posted on August 5, 2026, with responses due by August 17, 2026, classified under NAICS code 333517 and administered by the Department of Defense through the DDSP New Cumberland Facility. The original required delivery date was November 20, 2026, with the need ship date set for February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
GRINDING AND BUFFING M
Solicitation # SPE8E6-26-T-4011
The contract is for the procurement of seven grinding and buffing machines, utility model, under NSN 3415-01-268-7146 and purchase request 7017758465, with a total quantity of seven units to be delivered within 167 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and containment standards, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements. The machine must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any portable devices containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, and for simplified acquisitions, the revision in effect on the solicitation issue date governs. Delivery is directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required ship date set for February 1, 2027, though the original delivery date was December 13, 2026. The solicitation was issued under contract SPE8E6-26-T-4011 with a response deadline of August 17, 2026, and is governed by NAICS code 333517 under the Department of Defense.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
PUNCH, METAL PUNCHING M
Solicitation # SPE8E5-26-T-3802
The contract specifies the procurement of seven metal punching machines under NSN 3456-01-137-3128, with a unit price of $7.00 per unit and a total contract value of $49.00. The item is to be delivered FOB origin within 167 days, with delivery required by October 21, 2026, though the need ship date is set for February 1, 2027. Packaging must comply with MIL-STD-2073-1E and ASTM-D-3951, using new and unused containers, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and shipping is directed to DDSP New Cumberland Facility in New Cumberland, PA. Inspection and acceptance occur at destination, with zero variance allowed in quantity. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional components like batteries, lights, sensors, or weapons as defined by NAVSEA, and all portable devices containing mercury must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract incorporates technical and quality standards listed in the DLA Master List, with revisions controlled based on solicitation or award dates. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the purchasing unit aligns with DoD authorized standards. The contracting office is the Department of Defense, with Khue Nguyen listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
Federal
13 AMU Laser Engraver
Solicitation # FA520526QB127
The solicitation seeks a single Laser Engraver to be delivered to Misawa Air Base in Japan, with the equipment required to fully comply with the salient characteristics of the Epilog Fusion Pro 36 Dual, though equivalent alternatives are acceptable. The contractor must supply all necessary hardware, accessories, documentation, and standard components to ensure the device is fully operational and capable of performing all specified tasks. This is a brand name or equal procurement under FAR part 12, and no separate written solicitation will be issued—the announcement serves as the complete request for offers. All submission deadlines and timelines referenced are in Japan Standard Time. Funds are not currently available for this contract, and the government's obligation is contingent upon future appropriation of funds; no legal liability is incurred until the Contracting Officer confirms in writing that payment funds are available. The NAICS code for this procurement is 333517, and there is no set-aside designation. The solicitation number is FA520526QB127, posted on August 5, 2026, with responses due by August 10, 2026, at 01:00 JST. The contracting office is located in APO, AP, and the point of contact is Alexander Holliday, with Rebecca Rohrs available for secondary inquiries. The place of performance is Misawa-shi, Aomori-ken, Japan.
FA5205 35 Cons Pk

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
SOURCES SOUGHT NOTICE | Rotary Parts Finishing Machine
Solicitation # 36C24426Q0850
The U.S. Department of Veterans Affairs, through the 244-NETWORK Contract Office 4 located in Pittsburgh, Pennsylvania, has issued a Sources Sought Notice for a Rotary Parts Finishing Machine, identified by solicitation number 36C24426Q0850. This notice seeks industry input to determine the availability of capable small businesses and to assess market interest for the procurement of equipment under the NAICS code 333517, which pertains to machine shop, tools, and die making machinery manufacturing. The response deadline is Monday, August 17th, 2026, at 4:00 PM Eastern Standard Time, and responses must be submitted prior to this time to be considered. No set-aside is currently designated for this solicitation, indicating that all eligible contractors may respond. The contract is not yet awarded and is in the exploratory phase to gather market data, ensuring the government’s requirements are feasible and competitively sourced. The place of performance is in Pittsburgh, Pennsylvania, with a zip code of 15206, and all communications should be directed to the primary point of contact, Tyler Kraft, at tyler.kraft@va.gov, or the secondary contact, Andrea Aultman-Smith, at andrea.aultman-smith@va.gov. Additional details regarding technical specifications and submission requirements are contained in the attached documentation referenced in the notice. The full solicitation and related information can be accessed via the SAM.gov link provided.
244-NETWORK Contract Office 4 (36C244)

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
Federal
Specimen Surface Laser Marking Device-Forest Products Laboratory
Solicitation # 12444526Q0066
The USDA Forest Service is soliciting a sole-source order for a 3-axis, air-cooled, 7W UV laser marking system operating at 355 nm, intended for high-contrast, cold patterning on wood specimens at the Forest Products Laboratory in Madison, Wisconsin. The system must feature an IP64-rated enclosure, a 30 μm spot size, automatic contour tracking with ±20 mm range, and repeatability of ±10 μm to ensure precise, non-destructive surface marking for material research without thermal damage. While the solicitation is issued as a sole-source under FAR 13.501(a) for Keyence Corporation of America (UEI: L66VDJVM3VP6), other responsible sources are permitted to submit quotes. The acquisition is conducted under FAR Subpart 12.6 as a commercial items procurement using a firm-fixed-price contract structure, adhering to FAR 52.212-4 and its Alternate I. The required delivery date is August 30, 2026, with FOB Destination terms placing all transportation risks and costs on the contractor until formal acceptance at the receiving dock. All offers must be submitted via email to Michael.Wheelock@usda.gov no later than August 7, 2026, at 9:00 A.M. EST, using the Standard Form 1449, supplemented by a Certificate of Conformance (FAR 52.246-15) that ensures full traceability to the original equipment manufacturer. Payment is mandatory through the Treasury’s Invoice Processing Platform (IPP.gov) per FAR 52.232-33, with no other invoicing methods accepted. Evaluation will be based on technical acceptability, past performance, and price reasonableness in a best-value trade-off, not a lowest-price technically acceptable process. Technical compliance is non-negotiable, requiring adherence to specific salient characteristics such as laser wavelength, power, resolution, and environmental protection. The contract includes comprehensive compliance clauses covering whistleblower rights, anti-trafficking, equal opportunity, Buy American and Trade Agreements, cybersecurity safeguarding, privacy training, and DEI compliance under newly issued provisions. The estimated contract value ranges from $85,265 to $95,265, encompassing the base equipment and potential long-term maintenance support. Acceptance will occur at the delivery location, with the government responsible
Csa East 6 Usda-Fs

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333517
New
DIBBS
ENGRAVING MACHINE, P
Solicitation # SPE8E5-26-T-3756
The contract is for the procurement of one Gravograph-New Hermes engraving machine, model P/N 29-043-0TM or V7200, identified by NSN 3417-01-466-0285, under solicitation SPE8E5-26-T-3756. Delivery is required within twenty days of award, FOB destination, with no variance allowed in quantity. The item must comply with all DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specified packaging methods, materials, and unit containment, and must be marked in accordance with MIL-STD-129 with no special marking codes. Mercury or mercury-containing compounds are strictly prohibited unless part of approved functional components such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The machine must be shipped via the fastest traceable means, not parcel post, to the US shipping address for USS ANCHORAGE LPD 23 at FPO AP 96666, using the VSM system and referencing RDD 777. The required delivery date is July 20, 2026, and the contract enforces full adherence to technical and quality standards from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. The point of contact for the Defense Logistics Agency is Don Trachtman, and the acquisition falls under NAICS code 333517 for industrial machinery manufacturing.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333517
New
Federal
Industrial Laser Cutting System Supply
FA4418 628 Cons Pk

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
Federal
DESKTOP LATHE AND MILL
Solicitation # SPMYM226Q7799
This solicitation, numbered SPMYM26Q7799, seeks quoted bids for a DESKTOP LATHE AND MILL from contractors responding to the U.S. Department of Defense through DLA Maritime - Puget Sound. All solicitation details and amendments will be posted exclusively on SAM.gov, and electronic quote submissions are required through the same platform. Bids must be submitted via email to diana.baldwin@dla.mil by Wednesday, August 5, 2026, at 10 a.m. PST, and must include a fully completed and signed solicitation form to be deemed responsive. The contract requires quotes to be furnished FOB Destination Silverdale, WA, with clear lead times or delivery dates provided. Contractors must supply complete information including their CAGE code, point of contact, manufacturer details, country of origin, and compliance with applicable FAR clauses such as 52.204-24 and 52.212-3. Contractors subject to NIST SP 800-171 cybersecurity requirements must have a current assessment on file, no more than three years old, unless otherwise specified. However, items classified as Commercial Off The Shelf (COTS) are exempt from this requirement, and bidders must explicitly identify and provide documentation for any COTS items during submission. All mandatory fields must be completed on the solicitation form, including Section K for manufacturer data and Section F for delivery timelines. Failure to sign boxes 30a, 30b, and 30c on page one, or to accurately complete any designated section, will render the bid non-responsive. The deadline for response is August 6, 2026, at 5 a.m. PST, and the NAICS code for this procurement is 333517, indicating the procurement falls under precision instrument and equipment manufacturing.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333517
New
Federal
Tools
Solicitation # W911S226U3903
The contract solicitation titled Tools under solicitation number W911S226U3903 is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside with full set-aside status, meaning only small businesses as defined by the Small Business Administration are eligible to compete. The North American Industry Classification System code 333517 corresponds to the manufacturing of industrial machinery, indicating the requirement is for tools likely used in industrial or military maintenance and repair operations. Responses are due by August 12, 2026, at 4:55 AM Eastern Time, with the solicitation posted on August 3, 2026. The primary point of contact is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476. The place of performance is listed with a zip code of 22211, suggesting delivery or service may be required primarily in the Arlington, Virginia area, despite the issuing office being based in New York. All interested parties must review the full listing of required tools provided in the attachment to ensure compliance with technical specifications.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
Federal
WATERJET MACHINING CENTER (SOLE SOURCE)
Solicitation # SPMYM226Q7742
The solicitation for a WATERJET MACHINING CENTER is a sole source opportunity issued by DLA Maritime - Puget Sound under solicitation number SPMYM26Q7742, with a posting date of August 3, 2026, and a firm response deadline of August 7, 2026, at 5:00 PM Eastern Time. Bids must be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL and must include a completed and signed solicitation, manufacturer information, country of origin, and lead time for delivery quoted FOB destination. Items classified as Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 compliance requirements, but bidders must clearly identify and provide supporting documentation to the contracting officer during the solicitation period. For non-COTS items, contractors must have a current, valid assessment under DFARS 252.204-7019, not older than three years, unless a shorter period is specified. The place of performance is in Silverdale, Washington, with the contracting office located in Bremerton, WA. This procurement does not utilize any set-aside provisions and falls under NAICS code 333517. All details and amendments will be publicly accessible via the SAM.gov website.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

NAICS: 332111
New
Federal
Conventional Tube Forgings per Drawing # 13122585, Revision New, for 155mm M775 Cannon, for the Watervliet Arsenal
Solicitation # W911PT26RA012
This contract solicitation is for the procurement of 72 conventional tube forgings per Drawing #13122585, Revision New, intended for use in the 155mm M776 Cannon at Watervliet Arsenal, New York. First Article Testing is required, and delivery is specified as FOB Destination. The solicitation, identified as W911PT26RA012, is scheduled for release on or around August 5, 2026, with responses due by August 4, 2026. All technical data associated with the forgings is designated as Militarily Critical Technical Data, and only businesses certified by the U.S./Canada Joint Certification Office with an active DD Form 2345 and a legitimate requirement may access it; foreign entities beyond Canada are ineligible. Participation requires an active System for Award Management (SAM) registration with current representations and certifications. The solicitation and all subsequent amendments will be issued electronically via SAM.gov, and bidders are solely responsible for monitoring the site for updates; failure to do so may result in nonresponsive offers. The acquisition is subject to international trade agreements including the World Trade Organization Government Procurement Agreement. All communications and submissions must be conducted through the designated electronic portal, and direct inquiries should be directed to Amanda Robinson at the Watervliet Army facility.
Iron and Steel Forging

POSTED

about 8 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541512
New
Federal
Cybersecurity & Compliance Support for NIST SP 800-171The contract seeks comprehensive cybersecurity and compliance support to ensure adherence to NIST SP 800-171 standards for the protection of Covered Defense Information. This includes the development of a System Security Plan, performance of a Supplier Risk Assessment (SPRS) evaluation, and the creation of a robust cyber incident response plan tailored to defense-related data handling requirements. The work is focused on enabling the prime contractor to meet federal cybersecurity mandates for safeguarding sensitive defense information across systems and operations. The contract is structured as a small business set aside under the SBA designation and falls under NAICS code 541512 for computer systems design services. It is issued by the Department of Defense under the agency designation W6QK Acc Wva, with performance required at Watervliet, NY, 12189. Responses are due by August 17, 2026, and the engagement is intended to support critical defense infrastructure through validated, compliant cybersecurity practices and incident readiness.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
Federal
Sustainable & Biobased Product Supply for Contract IntegrationThe contract seeks the supply of biobased and sustainable products including lubricants, packaging, and tools that meet USDA BioPreferred, EPA, and Energy Star standards for use in manufacturing and testing environments. These products must align with recognized environmental certifications to ensure compliance with federal sustainability goals. The opportunity is designated as a Small Business Set Aside under the SBA, reserved exclusively for small businesses, and falls under the NAICS code 325998 for other chemical product and preparation manufacturing. The place of performance is specified as Watervliet, New York, with a zip code of 12189. Submissions are due by August 17, 2026, at 8:00 PM Eastern Time, with the solicitation posted on August 3, 2026. This is classified as a subcontract opportunity under the Department of Defense, specifically managed by W6QK Acc Wva.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
Federal
Precision Forging Manufacturing – Crank Forging (First Article Waived)The contract specifies the manufacture of 77 additional crank forgings per drawing number 8768783DF, Revision V, intended for use in the 155MM M284 Cannon, with the First Article inspection requirement explicitly waived. The forgings must strictly conform to the approved baseline specifications, ensuring consistency and compliance with established military standards without the need for initial sample approval. The work falls under a Small Business Set Aside designation, with the NAICS code 332112 indicating precision forging and stamping operations as the primary industrial classification. The contract is classified as a subcontract under the U.S. Department of Defense, administered by W6QK Acc Wva, with performance required at Watervliet, New York, ZIP code 12189. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026, at 8:00 PM. The absence of a First Article requirement streamlines production timelines while maintaining quality assurance through adherence to the approved baseline, and the small business set aside ensures eligibility and preference for qualifying small businesses in the bidding process.
Nonferrous Forging

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
Federal
Precision Forging Manufacturing – Crank Forging (First Article Required)The contract specifies the manufacture of 77 precision crank forgings for the 155MM M284 Cannon systems, strictly adhering to engineering drawing #8768783DF, Revision V. Each forging must meet exacting dimensional and material specifications as defined by the drawing, and the scope includes full compliance with First Article Testing requirements to validate conformance before production proceeds. All testing results, inspection reports, and supporting documentation must be submitted for approval as part of the contractual deliverables. The work is designated as a Small Business Set Aside under the NAICS code 332112, indicating it is reserved for small businesses, and the place of performance is designated as Watervliet, NY, with a zip code of 12189. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026, with the contracting activity originating from the Department of Defense under the agency name W6QK Acc Wva.
Nonferrous Forging

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
Federal
Crank Forging, per Drawing # 8768783DF Revision V, for 155mm M284 Cannon, for the Watervliet Arsenal
Solicitation # W911PT26QA121
The contract involves the procurement of 77 crank forgings manufactured to Drawing #8768783DF, Revision V, specifically for use on the 155mm M284 Cannon, with performance localized at the Watervliet Arsenal in New York. This solicitation is designated as a Small Business Set Aside under NAICS code 332111, emphasizing priority for qualified small businesses, and is managed by the Department of Defense through the W6QK Acc Wva office. The solicitation was posted on August 3, 2026, with responses due by August 17, 2026, and the primary point of contact is Amanda Robinson, reachable via phone or email for inquiries regarding specifications and submission requirements. Deliveries are expected to be made directly to the Watervliet, NY facility with a zip code of 12189.
Iron and Steel Forging

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 541990
New
Federal
Evaluate Fire Suppression Bldg. 126 at the Watervliet Arsenal, Watervliet , NY
Solicitation # W911PT26QA024
The solicitation W911PT26QA024 issued by the Department of the Army’s Watervliet Arsenal seeks proposals from small businesses under a Total Small Business Set-Aside (FAR 19.5) to perform a comprehensive evaluation of the fire suppression system in Building 126 at the Watervliet Arsenal in Watervliet, NY. The primary requirement involves a site visit scheduled for December 17, 2025, during which the contractor will assess the condition, functionality, and compliance of the existing fire suppression system following the attached Statement of Work (Project #25PW063). The contractor is responsible for covering all costs related to the evaluation and must comply with the latest revision of the Service Contract Labor Standards, applicable FAR clauses, and relevant safety standards such as those referenced through OSHA voluntary compliance programs. The technical point of contact is Michael White, with administrative and contracting support managed through contacts at the Watervliet Arsenal. Although the contract type and value are not specified, the procurement aims to ensure timely and quality delivery of evaluation services. Offerors must submit their proposals by December 23, 2026, with detailed instructions available through the solicitation, although specific submission formats and evaluation factors are not fully disclosed in the provided materials. The solicitation highlights adherence to federal acquisition regulations and integration of standard labor and small business compliance clauses. The place of performance is Watervliet, NY, and a site visit will provide prospective contractors with firsthand inspection opportunities. While financial details, contract length, and award basis remain unspecified, the solicitation underscores a focus on technical competence, compliance with labor standards, and small business participation. The contracting office and points of contact offer support for clarifications during the procurement process, ensuring alignment with the Department of the Army’s acquisition policies and oversight.
All Other Professional, Scientific, and Technical Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541219
New
Federal
WAWF and IUID Administrative SupportThe contract requires the preparation and submission of WAWF invoices and the registration of delivered items in the Department of Defense’s IUID Registry, ensuring full compliance with DFARS 252.211-7003. This administrative support task is critical for accurate tracking and accountability of government-furnished property and must be completed in accordance with federal defense procurement standards. The work is tied to performance at Watervliet, NY, with a zip code of 12189, and all deliverables must meet DoD requirements for item identification and financial documentation. This is a subcontract under a Small Business Set Aside, classified under NAICS code 541219, indicating it is reserved exclusively for small businesses. The opportunity was posted on July 30, 2026, with a response deadline of August 13, 2026, and is issued by the Department of Defense through the W6QK Acc Wva office. The contractor must demonstrate proficiency in both financial invoicing systems and DoD property registration protocols, with no tolerance for noncompliance. Performance is expected to be executed remotely or on-site as necessary to meet registry and invoice deadlines, aligning with the broader DoD logistics and asset management framework.
Other Accounting Services

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 541611
New
Federal
Security Compliance and Personnel Vetting SupportThe contract supports Department of Defense security compliance by providing personnel vetting services essential for access to Watervliet Arsenal, specifically processing NACI, NCIC-III, and TSDB background checks for individuals requiring authorized entry. These services are critical to ensuring that all personnel meet the required federal security standards prior to gaining physical or system access to sensitive Defense infrastructure. The work is classified as a subcontract under a Small Business Set Aside, designated for total small business participation, and falls under NAICS code 541611 for management, scientific, and technical consulting services. The performance location is clearly defined as Watervliet, with a zip code of 12189, indicating the operational focus is centered on this specific Army installation. The solicitation was posted on July 30, 2026, with a response deadline of August 13, 2026, giving potential bidders approximately two weeks to submit proposals. The contracting agency is listed as W6QK Acc Wva under the Department of Defense, and while no specific point of contact or full address details are provided, the place of performance anchors the scope to Watervliet Arsenal. This contract is exclusively focused on executing background check processing functions aligned with DoD security protocols, ensuring that compliance, timeliness, and accuracy in vetting are maintained to uphold the integrity and safety of the installation and its operations.
Administrative Management and General Management Consulting Services

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 484121
New
Federal
Freight and Delivery Logistics to Watervliet ArsenalA subcontract has been posted to transport 10 metal dump carts from the manufacturer to Watervliet Arsenal in New York, with a required delivery to the DoD installation and full compliance with WAWF reporting standards for documentation and receipt. The requirement is designated as a Small Business Set Aside, meaning only small businesses are eligible to respond, and the NAICS code 484121 indicates this is for general freight trucking services. The solicitation was posted on July 30, 2026, with responses due by August 13, 2026, at 8:00 PM ET. The contracting activity is under the Department of Defense, specifically identified as W6QK Acc Wva, and the place of performance is clearly defined as Watervliet, NY, with a zip code of 12189. All logistics must include coordination with DOD receiving personnel to ensure seamless delivery and accurate electronic documentation per federal requirements.
General Freight Trucking, Long-Distance, Truckload

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 332420
New
Federal
Manufacture and Supply of Metal Dump CartsThe contract requires the fabrication and delivery of ten metal dumping chip carts, each with a 27 cubic foot capacity, equipped with 8XQ 8-inch casters and TH750 trunnion hardware, all built to comply with CECORE specifications. The work is classified as a Small Business Set Aside under NAICS code 332420, meaning only small business concerns are eligible to bid, and the award will be made without competition from larger entities. The opportunity was posted on July 30, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense under the agency name W6QK Acc Wva. Performance of the contract must take place at a facility in Watervliet, New York, with ZIP code 12189. This subcontract is not open to the public for direct inquiry and requires interested parties to access the official SAM.gov portal via the provided link for full details and submissions.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
Federal
Metal Dump Carts for Watervliet Arsenal
Solicitation # W911PT26QA112
Ten metal dumping chip carts with a 27 cubic foot capacity, part number 256 by CECORE, are being procured under solicitation W911PT26QA112 for the Watervliet Arsenal in New York. Each cart includes the 8XQ 8-inch caster package and TH750 trunnion hardware, with freight costs covered as part of the contract. The opportunity is a Small Business Set Aside, indicating exclusive eligibility for small businesses under NAICS code 333998, and is managed by the Department of Defense through the W6QK Acc Wva office. Proposals must be submitted by August 13, 2026, at 8:00 PM Eastern Time, with the point of contact for inquiries being Evan Caulfield, reachable at 518-266-4813 or evan.j.caulfield.civ@army.mil. The place of performance is confirmed as Watervliet, New York, with delivery expected to this location.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in 8 days
View Details