Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Modular Rack-Mount UPS Chassis Integration

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334310
New
Federal
363 TRS - Conference Room AV Upgrade
Solicitation # FA302026Q0089
This solicitation, FA302026Q0089, is a combined synopsis and request for quotes for a commercial audio visual upgrade at Building 1025, 363 TRS, Sheppard Air Force Base, Texas, issued under FAR Part 12 as a brand name or equal requirement. The contract is set aside exclusively for small business concerns as defined by the NAICS code 334310 with a size standard of 7,500 employees, and offers must be submitted via email to the designated primary and alternate contacts by 12:00 PM CST on August 10, 2026. All questions must be submitted in writing by 4:30 PM CST on August 6, 2026. The requirement is to design and install a fully automated Q SYS AV system, including the removal of existing equipment, with critical components such as two 98” and one 55” Christie TAA-compliant LCD displays, ceiling-mounted speakers and microphones, tabletop control tablets, an equipment rack, network switch, surge protector, UPS, and patch panel. All equipment must be TAA compliant, Microsoft Teams certified, BYOD compatible, and capable of operating within the AFNET network while meeting current cybersecurity standards. The system must support remote participation with high-fidelity audio and video capture, ensuring clear speaker transmission above ambient noise. Site visits are not permitted due to time constraints, and funds are not currently available—no award will be made until appropriations are secured, and the government retains the right to cancel the solicitation without obligation to reimburse offerors. The contractor must comply with a full suite of federal regulations including prohibitions on procurement from the Xinjiang Uyghur Autonomous Region and the Maduro regime, restrictions on covered defense telecommunications equipment, Buy American and Balance of Payments Program requirements, and rules concerning whistleblower rights, child labor, convict labor, equal opportunity, and human trafficking. All employees must be trained and qualified, and physical access to Sheppard AFB requires strict adherence to security protocols including gate entry procedures, vehicle searches for vehicles exceeding three-quarter ton gross weight, mandatory security briefings, and escort requirements. Prohibited items include military uniforms, communication and recording devices, and contraband; badges must be visibly displayed on the upper torso. Work must occur Monday through Friday between 7:00 a.m. and 4:00 p.m. excluding federal holidays, with after-hours work allowed
FA3020 82 Cons Lgc

POSTED

about 20 hours ago

DEADLINE

in 2 days
NAICS: 334310
New
Federal
2026 XR-4 Secure Edition
Solicitation # N0017326Q1301400110
The Naval Research Laboratory is soliciting quotations for the procurement of 2026 | XR-4 Secure Edition equipment under a Total Small Business Set-Aside, strictly limited to small businesses as defined by the NAICS code 334310 with a size standard of 750 employees. This is a Firm-Fixed-Price, brand-name-only procurement using the Federal Acquisition Circular 2026-01 effective March 13, 2026, and requires all items to be new, covered by the manufacturer’s warranty, and sourced exclusively through an Original Equipment Manufacturer or its authorized dealer, distributor, or reseller. Offerors must provide documentation proving their authorized status and must not submit remanufactured or gray market goods. All equipment must be delivered to the U.S. Naval Research Laboratory at 4555 Overlook Avenue, S.W., Building 49, Washington, DC 20375, with FOB Destination strongly preferred. Submission must include a single technical and price quote via email, containing the company’s DUNS and Cage Code, and must confirm acceptance of all solicitation terms without modification—or clearly list any exceptions with rationale. Quotes must be received by August 11, 2026, and only those from entities actively registered in SAM.gov will be considered. Evaluation will follow the Lowest Price Technically Acceptable methodology, where technical acceptability is determined first based on compliance with specified requirements, followed by price analysis to determine the most advantageous award, potentially across multiple vendors if collectively cost-effective. Maintenance renewals for software or services must not be backdated and reinstatement fees, if applicable, must be itemized separately.
Naval Research Laboratory

POSTED

about 20 hours ago

DEADLINE

in 3 days
NAICS: 334310
New
Federal
59--MICROPHONE
Solicitation # N0038326QBA49
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to DALLAS AVIONICS INC for the procurement of 16 microphone units, NSN 1R-5965-016712016-V2, part number 602-3373, designated for use on V22 aircraft. This procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.103-1, as the vendor is the original equipment manufacturer and the sole source capable of providing this part due to the absence of technical drawings or data that would enable alternative suppliers to produce it. The Government does not hold any rights to the proprietary data required for replication, eliminating competition. The contract will be executed under FAR Part 15 procedures, with delivery terms set at FOB Origin, a one-year duration, and UID and Buy American requirements applicable. The solicitation will be issued electronically via NECO on approximately August 10, 2026, with proposals due by September 9, 2026, and an anticipated award date in October 2026. Although the notice invites other firms to demonstrate capability to provide a commercial item within one day, any responses received within 31 days will be evaluated solely to determine if competition is feasible, with no expectation of disrupting the sole-source intent. All submissions must be sent via email to Grace McGinley, and no hard copies or phone inquiries will be accepted. The NAICS code is 334310 and this is not a small business set-aside.
Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month
NAICS: 334310
New
Federal
BSAT VTC Fort Detrick Bldg 1546
Solicitation # W91QV126QA059
The contract W91QV126QA059 is a small business set-aside solicitation for the procurement and installation of new Video Teleconferencing (VTC) equipment in Building 1546 at Fort Detrick, Maryland, to replace legacy systems in three designated rooms under the Biorisk Program Office. The work includes supplying and installing displays, audio and video components, cabling, and integrating all hardware with government-furnished laptops and docking stations, with deliverables requiring full system functionality, labeled wiring, as-installed drawings, schematics, manufacturer manuals, and a Preferred Maintenance Compliance Schedule. The solicitation mandates strict compliance with MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling using two-dimensional Data Matrix barcodes compliant with ISO/IEC 16022 ECC200 and ISO/IEC 15434 data formatting standards. The contract is firm fixed price, and award will be made using the Lowest Price Technically Acceptable (LPTA) method, evaluating technical capability as the primary factor—where any unacceptable rating in a non-price sub-factor disqualifies the proposal—followed by price reasonableness and completeness. The performance location is identified as Fort Detrick, Maryland, with delivery required to the W3J1 USAE JOINT HLTH SVC AGNCY in Falls Church, Virginia, under FOB Destination terms placing transportation cost and risk of loss on the contractor until delivery. Submissions must be electronically submitted via email by the revised deadline of August 20, 2026, at 12:30 PM EST, with proposals structured into three volumes: administrative documentation including a valid SAM record and signed SF-1449, a technical narrative addressing the performance work statement without redundancy, and a pricing volume with fully burdened labor rates and equipment breakdowns adhering to strict formatting rules including minimum font sizes and file naming conventions. Contractors must comply with extensive security protocols including PIV requirements, antiterrorism awareness training via the Atlas2 portal, annual OPSEC certification, access control vetting through the installation visitor center, and adherence to Force Protection Conditions. All personnel may be subject to background checks and site-specific identification requirements, with potential need for a Common Access Card if the contract extends beyond six months. Contract administration requires electronic invoicing via Wide Area WorkFlow, and all equipment must be marked with a Unique Item Identifier and reported through Material Inspection and
W6QM Micc-Ft Belvoir

POSTED

about 20 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The contract involves the supply and integration of a ruggedized 8-slot UPS chassis based on the Voyager 8+ platform with a 600W capacity, designed to be mounted within transit cases for deployment in demanding environments. The system must support modular radio, compute, and networking components and be fully compliant with MIL-STD-1275 for 28 VDC power requirements, ensuring operational reliability under military-grade electrical conditions. Integration responsibilities include encapsulating the chassis into robust transit cases that provide protection against shock, vibration, and environmental exposure without compromising access or serviceability. The work is to be performed within the National Capital Region and is issued as a subcontract under the National Research Council of Canada, representing the Government of Canada. The solicitation was posted April 30, 2026, with a response deadline of May 15, 2026. The North American Industry Classification System code 334310 indicates the focus on communication equipment manufacturing, underscoring the technical nature of the hardware being integrated. This effort supports mission-critical applications requiring portable, field-deployable power systems that maintain performance under extreme operational stress.

General Info

Supply and integrate rugged 8-slot Voyager 8+ UPS chassis, 600W, MIL-STD-1275 compliant.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and integration of a ruggedized 8-slot UPS chassis (Voyager 8+ platform, 600W) into transit cases, supporting modular radio, compute, and networking modules with MIL-STD-1275 28 VDC compliance.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
New
International
Selective Laser Sintering (SLS) 3D Printing System
Solicitation # 26-58097
The National Research Council Canada is seeking a new Selective Laser Sintering (SLS) 3D Printing System through an open Request for Proposal with solicitation number 26-58097, published on August 7, 2026, and with bids due by September 2, 2026. The system must be delivered to Mississauga, Ontario, with all deliverables received no later than November 30, 2026. The award will be made to the bidder who meets all mandatory technical criteria and offers the lowest price, within the scope of the Canadian Free Trade Agreement. Proposals must be submitted electronically to the NRC Bid Receiving Unit and may be submitted in either English or French. The procurement is governed by Canada’s Integrity Regime, and bidders are responsible for regularly checking the Government Electronic Tendering Service for any amendments, as no direct notifications will be sent. The procuring office is Helen Tran, Senior Procurement Officer, and all correspondence should be directed through the provided contact details. Canada encourages participation from Indigenous businesses through the Indigenous Business Directory, which may provide access to contracts set aside under the Procurement Strategy for Indigenous Businesses, though this specific solicitation does not specify a set-aside. The NRC retains the right to negotiate with any supplier and has made clear that it will not be held liable for any information obtained from third-party websites or for bidder oversights regarding updates posted exclusively on GETS. All relevant documents and notices are available through the Canada Buys portal, and while the agency does not provide NAICS codes or set-asides, the process remains open and transparent with emphasis on compliance, technical adequacy, and cost-effectiveness.

POSTED

1 day ago

DEADLINE

in 25 days
View Details
NAICS: 334513
New
International
Bio-capacitance probe system
Solicitation # 26-58103
The National Research Council of Canada is seeking a four-probe bio-capacitance system capable of real-time measurement of bio-capacitance in up to four bioreactors simultaneously, enabling continuous estimation of viable cell concentration and derivation of critical cell culture parameters such as cell size, internal conductivity, and critical frequency through multi-frequency analysis of the β-dispersion signal using the Cole–Cole α model. The system must feature probes compatible with the agency’s diverse bioreactor platforms and support real-time data capture via both OPC-UA and 4–20 mA communication protocols to enable direct integration into process control loops. All hardware must be new, off-the-shelf, non-counterfeit, and fully traceable to the original manufacturer, with clear unencumbered title guaranteed by the contractor. The system must be delivered within 12 weeks of award to the NRC facility in Montreal under DAP Incoterms®2020 delivery terms, accompanied by technical documentation in hard and digital formats, operation software, a calibration signal simulator (optional), and guaranteed spare parts availability for five years alongside one year of technical support. The solicitation follows a Low Price Technically Acceptable (LPTA) evaluation methodology, where offerors must first meet all mandatory technical requirements—detailed in Annex C and E—to qualify for price consideration, with award going solely to the lowest-priced compliant proposal. Proposals must be submitted electronically in two separate attachments—technical and financial—via email only, with a total file size not exceeding 10 MB, and must include completed Offer Submission and Declaration Forms adhering to the Federal Contractors Program for Employment Equity requirements. No security clearance is required, and the contractor must certify compliance with ethical procurement standards, prohibitions on contingency fees, international sanctions, and forced labor laws. All contract records must be retained for seven years post-final payment, and invoices must be submitted electronically to a designated NRC email, with payment processed via direct deposit, EDI, or wire transfer. Packaging must comply with Canadian standards and emphasize environmentally preferable materials, while labeling must include item descriptions, quantities, contract ID, and inspection voucher information. Acceptance of goods will occur at the delivery site within 30 days of notification, with the government retaining full authority for inspection and rejection of non-conforming systems.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 238150
New
International
M50 South Window Replacement Project
Solicitation # 26-58058
The M50 South Window Replacement Project, solicited under number 26-58058 by the National Research Council of Canada, requires the replacement of 20 windows and associated masonry repointing at Building M-50 located at 1200 Montreal Road in Ottawa, Ontario. The work includes removing and replacing 11 existing windows and frames, installing nine new insulated glass units, providing insulation and sealant, and fitting new roller shade blinds. All deliverables must be completed and received by December 31, 2026, and performance is restricted to Canadian suppliers due to the Policy on Reciprocal Procurement, with non-Canadian bids automatically rejected. A mandatory site visit is required on either June 29 or June 30, 2026, at 10:00 a.m. ET, and failure to attend and sign the attendance sheet will result in bid disqualification. Proposals must be submitted electronically via email no later than 2:00 p.m. EST on July 30, 2026, with a maximum size of 10 MB, in either English or French, and without ZIP attachments or external links. Bidders must disclose all subcontractors and suppliers, provide integrity declarations, and confirm compliance with government policies on inadmissibility and suspension. The contract imposes strict compliance with construction, safety, and security protocols. All personnel, including subcontractors, must meet mandatory security clearance requirements to access the site, and access to PROTECTED or CLASSIFIED information is strictly prohibited. The contractor is responsible for maintaining comprehensive insurance coverage including Commercial General Liability and Umbrella/Excess Liability, and must develop a Site Specific Safety Plan addressing hazards such as fire, flooding, and pandemics. Safety compliance is enforced through an on-site safety board displaying project notices, emergency schematics, and Ontario Health and Safety Act information. Materials must be delivered in original factory packaging, labeled with manufacturer details, stored off the ground in dry, well-ventilated areas, and protected from damage, with painting materials kept away from heat sources. Quality assurance demands manufacturer-certified product documentation, certified test reports including sand gradation per CAN/CSA-A179, and shop inspections for glass. A mock-up including glazing, air barriers, and vapor retarder seals must be constructed and inspected for 24 hours prior to proceeding with full installation. Final acceptance by NRC is required before releasing affected work areas. Payment
Glass and Glazing Contractors

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541611
New
International
Technical Documentation and Compliance ReportingThe contract pertains to the development and management of technical documentation, including calibration certificates, validation reports, and compliance records, all aligned with Good Manufacturing Practices, U.S. Food and Drug Administration regulations, and 21 CFR Part 11 standards for electronic records and signatures. The work requires rigorous adherence to international regulatory frameworks to ensure the integrity, traceability, and audit-readiness of all documented processes, primarily supporting activities within the Canadian government’s scientific and technical operations. The subcontractor must possess demonstrated expertise in generating compliant documentation that meets stringent quality and data integrity requirements across pharmaceutical, biotech, or laboratory environments. The opportunity is posted under the National Research Council of Canada within the Government of Canada framework, specifying North American Industry Classification System code 541611 for scientific and technical consulting services. The contract is categorized as a subcontract, with a response deadline of August 25, 2026, and is open for bids through the Canada Buys portal. Performance of the work is expected to occur in Canada, though no specific city or address is provided. The solicitation does not indicate a set-aside status or targeted business classification, and no point of contact is listed, implying inquiries should be directed through the official tender portal.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Calibration of New or Unlisted EquipmentThe contract involves performing ad-hoc calibration services for new or previously unlisted instruments that are introduced during the contract term, with all calibration activities required to meet Good Manufacturing Practice (GMP) standards. This includes the assessment and validation of each instrument to ensure accuracy, reliability, and compliance with regulatory expectations, particularly in environments where precision and documentation are critical. The work must be responsive to dynamic equipment additions and conducted without prior listing, implying a need for flexible, on-demand technical expertise and thorough documentation protocols. This subcontract is issued under the North American Industry Classification System code 811310 and is managed by the National Research Council of Canada, part of the Government of Canada. The opportunity was posted on August 6, 2026, with a response deadline of August 25, 2026. Performance is expected to occur across Canada, reflecting a nationwide scope of work. The nature of the requirement suggests the need for qualified service providers with demonstrated experience in GMP-compliant calibration, the ability to rapidly evaluate unknown or non-standard instruments, and a robust quality management system capable of handling unplanned calibration events while maintaining audit readiness.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Calibration Services for (3) Years for the NRC- Clinical Trial Material Facility (CTMF) and Emergency Calibration Services
Solicitation # 26-58107
The contract encompasses a three-year calibration services agreement for the National Research Council of Canada’s Clinical Trial Material Facility, starting in September 2026, and structured as three consecutive one-year terms. The vendor will be responsible for calibrating all 365 pieces of equipment listed in Annex 1, which are integral to bio-manufacturing operations and must remain compliant with industry standards and regulatory mandates. Calibration services are essential to ensure the accuracy and reliability of equipment, directly supporting the integrity of clinical trial materials. In addition to routine calibrations, the contract includes mandatory provision of emergency calibration services to be activated on an as-needed basis during unexpected equipment failures, operational disruptions, or urgent compliance events. The solicitation, issued under reference number 25-58107/26-58107, was posted on August 6, 2026, with responses due by August 25, 2026, and is part of an open competitive bidding process managed by the Government of Canada through the National Research Council. The primary point of contact for inquiries is Cindy Romain, Contracting Authority, reachable via email and phone provided in the solicitation.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 541611
New
International
Reciprocal Procurement Compliance and Certification ServicesThe contract titled Reciprocal Procurement Compliance and Certification Services is a subcontract under the Government of Canada, specifically managed by the National Research Council of Canada, aimed at providing expert support to complete Annex H – Declaration for Reciprocal Procurement. This declaration is essential to align with Canadian federal procurement policies, ensuring that all contractual obligations related to reciprocal trade agreements are accurately documented and formally certified. The work involves navigating complex regulatory requirements to validate compliance, which may include reviewing supply chains, verifying domestic content, and preparing auditable records that meet federal standards. The opportunity is posted with a response deadline of September 1, 2026, and is classified under NAICS code 541611, indicating it pertains to administrative management and general management consulting services. Performance of the contract is expected to take place in Ottawa, though no specific office address or point of contact is provided. The solicitation does not specify a set-aside type, suggesting it is open to all eligible businesses regardless of size or designation. Contractors are expected to deliver precise, policy-compliant documentation that enables the National Research Council of Canada to proceed with procurement activities in full adherence to national and international trade agreements.
Administrative Management and General Management Consulting Services

POSTED

4 days ago

DEADLINE

in 24 days
View Details
NAICS: 423490
New
International
Supply of Spares, Consumables, and DocumentationThe contract titled Supply of Spares, Consumables, and Documentation under the NAICS code 423490 is a subcontract issued by the National Research Council of Canada on behalf of the Government of Canada, with a posted date of August 4, 2026, and a response deadline of September 1, 2026. It requires the supply of essential spare parts and consumables such as seals and sample holders, alongside comprehensive technical documentation including operational manuals, software licenses, and RSPLs, all to be delivered as integral components of system provisioning. The place of performance is specified as Ottawa, Canada, and the contract is structured to ensure complete technical readiness and ongoing functionality of the delivered systems. All deliverables must be provided in alignment with the technical specifications mandated by the National Research Council of Canada, with the expectation that spare parts and consumables will support long-term operation and maintenance, while documentation must be complete, accurate, and accessible for end-user deployment. Subcontractors are expected to meet delivery timelines and quality standards without deviation, and submissions must be received before the deadline to be considered. The contract does not specify set-aside provisions or organization type restrictions, allowing eligible suppliers to participate under standard subcontracting rules applicable to federal procurement in Canada.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 24 days
View Details