Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MTU Diesel Engine Field Overhaul and Technical Support

Active

Federal

Response Deadline10/29/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The MTU Diesel Engine Field Overhaul and Technical Support subcontract involves providing specialized on-site technical support, diagnostics, and maintenance for MTU diesel engines supporting Naval Surface Warfare Center, Philadelphia Division projects. Key technical responsibilities include executing field diagnostics, vibration analysis, and borescope inspections utilizing heavy-lift rigging and MTU diagnostic software. The contractor is required to deliver comprehensive field service reports and documentation for all completed maintenance actions. Performance will take place in Philadelphia, Pennsylvania, and requires personnel to be MTU Certified Technicians. Due to the nature of the work on Navy piers, all staff must possess the necessary security clearances for site access. This opportunity is categorized under NAICS code 811310 and is managed under the Department of Defense.

General Info

MTU certified technicians provide diesel engine maintenance and support for Navy projects in Philadelphia.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

This scope was carved out of N64498-25-RFPREQ-PD-42-0014.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PD-42-0014; MTU Diesel Engine Lifecycle Support

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 10:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site technical support, diagnostics, and maintenance for MTU diesel engines for prime contractors on Naval Surface Warfare Center, Philadelphia Division (NSWCPD) projects. Executes field diagnostics, borescope inspections, and vibration analysis using MTU diagnostic software and heavy-lift rigging. Requires MTU Certified Technicians and security clearances for Navy pier access. Delivers completed maintenance actions and field service reports.

Similar Contracts

Same NAICS industry code

Overhead Hoist Maintenance and Emergency RepairThis small business set-aside subcontract, issued by the Department of Defense for the 316 Cons Pk, involves providing unscheduled routine and emergency repairs for electric and manual hoists at Andrews Air Force Base. The selected contractor will support prime contractors on Air Force facility projects by responding to service calls and utilizing OEM Operation and Maintenance manuals to ensure all hoist systems are fully repaired and operational. Qualified technicians must possess formal training in OSHA, ASME, ANSI, and DAFMAN 91-203 standards. This opportunity falls under NAICS code 811310, with a response deadline set for October 30, 2026.

FA2860 316 Cons Pk

POSTED

about 4 hours ago

DEADLINE

Call for Solutions - Bavaria Area Commercial Refrigeration Services

Solicitation # HQC0102704

The Defense Commissary Agency is seeking innovative commercial solutions for refrigeration maintenance services at commissaries located in the Bavaria area, specifically in Grafenwoehr and Vilseck. This requirement, issued under solicitation HQC0102704 as a Commercial Solutions Opening, encompasses comprehensive preventative, unscheduled, and 24/7/365 emergency maintenance for commercial product refrigeration systems to ensure continuous operations and prevent inventory loss. The government is looking for a provider with proven expertise in commercial grocery settings who can offer rapid on-site emergency response and transparent fixed-price quoting and reporting procedures. The anticipated period of performance is for up to five years, potentially structured as a base period with one or more option periods. Awardees must ensure full compliance with German and European Union statutory requirements, as well as Department of War statutory, safety, and warranty standards. Interested vendors were required to submit a Phase 1 Solution Brief by October 14, 2026. Evaluation focuses on technical capabilities, alignment of the service model with government value-driven goals, and adherence to local commercial standards for preventative maintenance.

Defense Commissary Agency- Eur Area

POSTED

about 4 hours ago

DEADLINE

YUMA VMS MODERNIZATION

Solicitation # N3220527Q7017

Solicitation N3220527Q7017 is an Invitation for Bid issued by MSCHQ Norfolk for the YUMA EPF Video Management System (VMS) Upgrade. This Women-Owned Small Business set-aside project requires technical services to replace Video Management Servers VMS1 and VMS2 and upgrade to the Ocularis system on EPF-8, utilizing the version currently installed on EPF-13. The scope of work includes the upgrade of Wireless PBX and Wireless LAN Controllers using Government Furnished Equipment, followed by comprehensive testing and inspection of the JSCE and JRSS systems to ensure all hardware, software, and cameras are functioning properly. Additionally, the contractor must provide on-site crew training on JRSS/JSCE and JWICS systems, focusing on operational procedures and the configuration of new views. The period of performance is scheduled from November 16, 2026, to December 18, 2026, with work performed at Lamberts Point, Norfolk, VA. This is a Firm Fixed Price contract requiring a detailed price breakdown of labor hours, hourly rates, travel, and materials. Bids are due by October 22, 2026, at 1:00 PM. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various Federal Acquisition Regulations, including Buy American and Service Contract Labor Standards. Inspection and acceptance will occur at the destination in Norfolk, VA, under the responsibility of the government.

POSTED

about 4 hours ago

DEADLINE

Overhead Hoist Maintenance Joint Base Andrews

Solicitation # SSNFA2860

The Department of Defense, through the 316 Cons Pk office, is issuing a sources sought notice for a small business set-aside contract to provide comprehensive maintenance, testing, and certification for overhead hoists and associated equipment at Joint Base Andrews and Davidsonville, Maryland. The scope of work requires the contractor to furnish all labor, transportation, equipment, and supervision for annual certified inspections and both routine and emergency service call repairs. All work must be performed by qualified technicians with formal training and must adhere to OSHA, ASME, ANSI, and DAFMAN 91-203 standards, as well as original equipment manufacturer specifications. Key deliverables include the submission of a Quality Control Plan within 15 calendar days of award and the provision of certification inspection certificates to the Contracting Officer's Representative within five business days of completion. For payment, the contractor must provide service tickets annotated by the COR and follow specific reimbursement protocols for parts, requiring a single invoice for items under 3,000 dollars and three competitive quotes for items exceeding that amount. Access to Joint Base Andrews requires the submission of detailed personnel and vehicle information, and strict adherence to installation security policies regarding prohibited weapons and controlled substances is mandatory.

FA2860 316 Cons Pk

POSTED

about 4 hours ago

DEADLINE

Workshop Machinery and Hydraulic Systems TechnicianThis subcontract opportunity is for a Workshop Machinery and Hydraulic Systems Technician to support prime contractors on Durham County Council fleet projects. The selected provider will be responsible for the repair and maintenance of general workshop machinery, specifically focusing on hydraulic pumps, valves, and industrial metal containers. Additionally, the contractor must perform preventative maintenance on powered equipment support tools in accordance with CPV 50500000 standards to ensure all systems remain fully operational. The contract was posted on October 13, 2026, with a response deadline of November 17, 2026. Operating under NAICS code 811310, the project is managed by the Durham County Council. Interested parties can find further details through the official tender notice provided by the agency.

Durham County Council

POSTED

about 18 hours ago

DEADLINE

in about 1 month

MOT and DVSA ATF Lane Equipment SpecialistThis subcontract for the Durham County Council involves providing specialized maintenance, calibration, and repair services for vehicle testing equipment. The scope of work focuses on the calibration of emissions equipment, headlight testers, and brake testers, with a specific requirement to maintain the DVSA ATF lane located at the Meadowfield Depot. All services must strictly adhere to DVSA standards for MOT equipment calibration and ATF lane operations to ensure the delivery of certified, operational testing facilities. The opportunity is categorized under NAICS code 811310 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 17, 2026, at 12:00 PM. The primary objective of the contract is to ensure that all vehicle testing equipment used for fleet projects remains compliant and fully functional according to regulatory requirements.

Durham County Council

POSTED

about 18 hours ago

DEADLINE

in about 1 month

002468 - Contract for Fleet Equipment Maintenance and Potential Repair

Solicitation # OPEN20252200

Durham County Council is seeking a contractor for the ongoing maintenance, calibration, and potential repair of workshop equipment across four of its facilities. These workshops support a fleet of approximately 1,100 vehicles and 3,000 items of powered equipment, including MOT testing capabilities at all sites and a DVSA ATF lane at the Meadowfield Depot. Because the council operates 24/7 to support the community, the contractor must perform repairs and inspections at the earliest opportunity to minimize downtime and maximize the utilization of testing bays. The contract, identified by solicitation number OPEN20252200, has an estimated total value of 105,000 GBP excluding VAT. The initial performance period is scheduled from January 4, 2027, to January 3, 2030, with the possibility of two 12-month extensions extending the term to January 3, 2032. Award decisions will be based on a weighted evaluation consisting of a pricing schedule at 60 percent and responses to four technical questions at 10 percent each. Tenders must be submitted via the OPEN Portal by November 17, 2026, at 12:00pm.

Durham County Council

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Standby Generator Preventative Maintenance, Repairs and Testing Services

Solicitation # FIN2026-231Q

The City of Barrie is seeking quotations for the provision of comprehensive preventative maintenance, inspection, deficiency repairs, demand and emergency repair services, and testing for approximately twenty-eight standby generators located in the City of Barrie and the Township of Oro-Medonte. The scope of work includes annual, semi-annual, and quinquennial maintenance in accordance with CAN/CSA C282:19 standards, OEM recommendations, and TSSA and ESA standards. Key requirements include the ability to meet a 1 hour and 30 minute emergency response time, the provision of portable generators as temporary replacements, and the submission of detailed reporting for all inspections and repairs. All work must be witnessed by a City employee, and hazardous materials must comply with Ontario WHMIS and flammable liquids regulations. The contract is expected to be executed the week of December 14, 2026, with an initial term and the possibility of two additional one-year extensions. Award selection is based on a three-stage evaluation process consisting of mandatory submission requirements, a rated technical evaluation requiring a minimum score of 36.00 points, and pricing, which is weighted at 40 points. Qualified respondents must be a single legal entity and provide technicians certified as Truck and Coach Technicians (310T), Industrial or Construction Electricians (442A/309A), or EGSA Journeymen. Additionally, technicians must hold valid CSA Z462 Electrical Safety and Lockout/Tagout training. Selected suppliers must maintain general liability insurance of 2 million dollars per occurrence and 5 million dollars aggregate, as well as 2 million dollars in automobile liability insurance. A performance security deposit of 10 percent of the total contract value is required. Invoicing is to be submitted monthly via electronic funds transfer. All quotations must be submitted electronically through the Bidding System by November 10, 2026, at 2:00 PM local time.

POSTED

about 18 hours ago

DEADLINE

On-Call Generator Repair and Troubleshooting ServicesThis subcontract for On-Call Generator Repair and Troubleshooting Services supports prime contractors managing housing projects for the City of Greater Sudbury. The scope of work focuses on providing technical repairs and emergency restoration services, specifically involving fault diagnosis, troubleshooting, and component replacement for Generac and Sommers generator systems. The service provider is expected to use specialized diagnostic tools to restore power during callbacks and must deliver fully operational systems along with detailed repair service reports. The opportunity is categorized under NAICS code 811310 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 12, 2026, at 6:30 PM. This contract ensures that critical power infrastructure within city housing projects remains functional through expert technical intervention and rapid emergency response.

City of Greater Sudbury

POSTED

about 20 hours ago

DEADLINE

Generator Preventive Maintenance and CSA Compliance TestingThis subcontract involves providing preventive maintenance and regulatory inspections for diesel and natural gas generators on City of Greater Sudbury housing projects. The scope of work includes performing weekly, monthly, semi-annual, annual, and five-year inspections, as well as oil and filter changes. A critical requirement is the execution of two-hour load bank testing using specialized equipment to ensure full compliance with CAN/CSA-C282 standards. The selected contractor is responsible for delivering all completed inspection reports and certified load bank test results. This opportunity is categorized under NAICS code 811310, with a response deadline set for November 12, 2026.

City of Greater Sudbury

POSTED

about 20 hours ago

DEADLINE

Request for Quotation (RFQ) for Generator Inspection and Maintenance Services

Solicitation # H01-99

The City of Greater Sudbury is seeking quotations for generator inspection and maintenance services to support the Greater Sudbury Housing Corporation. The contract covers a five-year term from January 1, 2027, to December 31, 2032, and involves providing preventive maintenance, testing, troubleshooting, and repair services for seven generators across various facilities, including sites on Belfry Avenue, Louis Street, Bruce Avenue, and Paris Street. Required services include weekly, monthly, semi-annual, annual, and five-year inspections, all of which must be performed in accordance with CAN/CSA-C282 standards, TSSA requirements for fuel-fired equipment, and manufacturer recommendations. The contract will be awarded to the lowest-priced bidder who passes a five-stage evaluation process based on pass/fail criteria and reference verification. Eligible bidders must be non-US suppliers with at least five years of experience maintaining emergency power systems in multi-residential buildings. Mandatory requirements include maintaining a health and safety program compliant with the Ontario Occupational Health and Safety Act and carrying a minimum of five million dollars in Commercial General Liability insurance with the City of Greater Sudbury named as an additional insured. Invoices are payable net 30 days and must be submitted via email. All bids must be submitted electronically through the bids and tenders portal by November 12, 2026, at 1:30 p.m. local time.

City of Greater Sudbury

POSTED

about 20 hours ago

DEADLINE

Mechanical Maintenance & Emergency RepairThis subcontract for Mechanical Maintenance and Emergency Repair involves providing both planned and reactive mechanical services for prime contractors working on Yorkshire Water Services Limited projects. The scope of work includes executing like-for-like plant replacements, performing mechanical repairs, managing operational SAP job execution, and providing emergency response services for water industry mechanical plant and equipment. The contract adheres to CPV 50000000 and is categorized under NAICS code 811310. The primary deliverables for this engagement are the successful maintenance of mechanical assets and the completion of all assigned repair work orders.

Yorkshire Water Services Limited

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Marine Engine Technical Manual and Data SupportThe Marine Engine Technical Manual and Data Support subcontract involves the development and updating of technical manuals and lifecycle documentation for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work focuses on updating maintenance schedules and training materials specifically for MTU engine models, utilizing Configuration Management tools and ensuring strict adherence to MIL-STD requirements for all technical manuals. Key deliverables include updated technical manuals, comprehensive maintenance guides, and detailed lifecycle data reports. This project is managed under NAICS code 541330 for the Department of Defense, with performance based in Philadelphia. The solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

Marine Auxiliary Systems Integration and SupportThe Marine Auxiliary Systems Integration and Support subcontract involves providing specialized engineering analysis and technical solutions for auxiliary systems on projects for the Naval Surface Warfare Center, Philadelphia Division. The scope of work focuses on analyzing system failures and designing modifications for exhaust, fuel delivery, lubrication, and cooling systems. These tasks require the use of fluid dynamics simulation tools and CAD software to produce detailed technical drawings and engineering reports. Qualified providers must possess a Professional Engineer license and demonstrate a thorough understanding of Navy shipboard installation standards. This effort is managed under NAICS code 541330 for the Department of Defense, with performance based in Philadelphia. Interested parties must submit their responses by October 29, 2026.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

MTU Engine Spare Parts and Component SupplyThis subcontract focuses on the supply of specialized replacement parts, gaskets, seals, and internal engine components for prime contractors working on Naval Surface Warfare Center, Philadelphia Division projects. The scope includes the manufacture or distribution of OEM-spec components specifically for MTU 8000, 4000, 2000, 1163, 595, and 396 series engines. All deliverables must be produced using marine-grade materials and strictly adhere to ISO 9001 and NAVSEA quality standards. Managed under the Department of Defense for the NSWC Philadelphia Division, the contract involves the delivery of physical engine components and spare parts kits to be performed in Philadelphia. The solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026, falling under NAICS code 336412.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

PD-42-0014; MTU Diesel Engine Lifecycle Support

Solicitation # N64498-25-RFPREQ-PD-42-0014

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research via a Sources Sought notice for the procurement of MTU Diesel Engine Lifecycle Support under solicitation number N64498-25-RFPREQ-PD-42-0014. The agency intends to establish a Firm Fixed Price Basic Ordering Agreement (BOA) to acquire engineering and lifecycle support for MTU engine models 8000, 4000, 2000, 1163, 595, and 396, as well as their related shipboard auxiliary systems. The selected contractor will provide the technical expertise and information necessary to develop and execute engineered solutions for fleet diesel problems. This notice is for planning purposes only and does not constitute a formal Request for Proposal or a commitment to contract. Interested respondents must submit a capability statement of no more than five pages to Jenny Tomeo via email by 6:00 PM EST on October 29, 2026. The primary NAICS code for this requirement is 541330. The government anticipates issuing the formal Request for Proposal in February 2027.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

**Big Blue 3 MAC** Metal printer alterations will be completed onboard USS IWA JIMA (LHD 7), USS BOXER (LHD 4), LHD 8 (USS MAKIN ISLAND)

Solicitation # N6449826Q0054

Solicitation N6449826Q0054, issued by the Department of Defense through the Nswc Philadelphia Division, seeks a contractor to perform metal printer alterations for the Big Blue 3 MAC project. The scope of work involves completing these alterations onboard three specific vessels: the USS IWA JIMA (LHD 7), USS BOXER (LHD 4), and USS MAKIN ISLAND (LHD 8). The project falls under NAICS code 336611 and is managed out of Philadelphia, Pennsylvania, with performance taking place in the 23511 zip code area. The solicitation was posted on October 8, 2026, and requires responses to be submitted by November 2, 2026. Interested parties can coordinate with the primary point of contact, Stephanie Tomaszewicz, or access further details through the provided government portals.

Ship Building and Repairing

POSTED

DEADLINE

PRE-SOLICITATION CONFERENCE – NSWCPD ENVIRONMENTAL QUALIFICATION TEST SERVICES

Solicitation # N64498-26-RFPREQ-PD-33-0143

The Naval Surface Warfare Center Philadelphia Division is hosting a pre-solicitation conference on November 12, 2026, to discuss upcoming requirements for Environmental Qualification Test Services for fiscal years 2027 through 2032. The Navy seeks external contractor support for shock, vibration, and electromagnetic interference/compatibility testing for shipboard and submarine hull, mechanical, and electrical equipment. Required services include test procedure development, execution, the design and fabrication of unique test fixtures, and comprehensive test reporting to alleviate scheduling constraints and fill internal capability gaps. Interested contractors must register by October 29, 2026, to attend the event either in person at the Philadelphia Navy Yard or virtually. In-person attendance is limited to three representatives per company and requires valid photo identification; foreign nationals are prohibited from registering. While this conference is voluntary and does not constitute a formal request for proposal, it serves as a critical opportunity for industry partners to learn about military standards, discuss acquisition strategies, and network with the government regarding these future testing needs.

Testing Laboratories and Services

POSTED

DEADLINE

C45 NDI Follow-on

Solicitation # N6449827R0002

Engineering Services

POSTED

DEADLINE

Elevator Equipment and Systems Recurring Preventative Maintenance and Non-Wear-and-Tear Repairs

Solicitation # N6449826Q0057

The Naval Surface Warfare Center Philadelphia Division is soliciting a competitive, single-award Firm Fixed Price service contract for recurring preventative maintenance and non-wear-and-tear repairs of elevator equipment and systems at various government buildings within the Philadelphia Navy Yard. This requirement is a 100 percent Small Business Set Aside under NAICS 238290. The scope of work includes a monthly preventative maintenance program, emergency repairs, and semi-annual, annual, and five-year full load tests in compliance with ASME A17.1 and A17.2 standards. The contract structure consists of a base year and four option years, with specific deliverables including a maintenance program plan, activity hazard analysis, and quality management plan, all due within 15 days of award. Award decisions will be based on a comparative evaluation of corporate experience, past performance, and total evaluated price, with experience and performance weighted significantly more than price. Technical capability, program management, and safety are baseline requirements that must be rated as acceptable for a quote to be eligible. The contractor must adhere to strict safety and reporting standards, including EM 385-1-1 and OSHA regulations, and provide comprehensive insurance coverage for workers compensation, general liability, and automobile liability. Invoicing is processed electronically via the Wide Area WorkFlow system, and all labor must comply with the specified Service Contract Act wage determinations.

Other Building Equipment Contractors

POSTED

DEADLINE

Pre-Solicitation Conference Columbia Class BST-1 Electrical Hull Penetrator and Transmitter Cable Assembly

Solicitation # N64498-25-RFPREQ-PD-45-0176

The Naval Surface Warfare Center Philadelphia Division is hosting a pre-solicitation conference on October 27, 2026, via Microsoft Teams to discuss a future FY27 requirement for Columbia Class BST-1 Electrical Hull Penetrators and Transmitter Cable Assemblies. The objective of this event is to inform industry partners about the scope of the project, which involves the fabrication, manufacture, assembly, testing, and shipping of electrical hull penetrators used to connect transmitter cables through the pressure hull of the AN/BST-1(B) system. Interested contractors must register by October 23, 2026, and are prohibited from being foreign nationals. While this notice is for informational purposes and does not constitute a formal request for proposal, it allows potential vendors to network with government representatives and discuss acquisition strategies. The contractor will be expected to handle Controlled Unclassified Information during the performance of this work.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement opportunity falls under NAICS code 336611 and is managed out of the agency's office located in Philadelphia, Pennsylvania. The solicitation was posted on October 1, 2026, with a response deadline set for November 2, 2026. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, to address inquiries regarding the submission process and specific requirements for this contract.

Ship Building and Repairing

POSTED

DEADLINE

Program Management and Critical Path AnalysisThis subcontract opportunity with the Naval Surface Warfare Center Philadelphia Division involves providing specialized program management and critical path analysis for prime contractors. The selected provider will be responsible for scheduling and Integrated Master Schedule management, utilizing industry standard software such as Primavera P6 or MS Project to deliver comprehensive schedules and critical path reports. Qualified candidates must hold a PMP or an equivalent program management certification to ensure professional oversight of project timelines. The contract falls under NAICS code 541611 and is associated with the Department of Defense, with performance taking place in the 19112 zip code area. Responses are due by October 14, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 6 hours

Systems Architecture and Technical WritingThis subcontract opportunity with the Naval Surface Warfare Center Philadelphia Division involves providing specialized systems architecture and technical writing services for prime contractors. The selected provider will be responsible for developing comprehensive system architectures, reference diagrams, and detailed technical documentation. All deliverables must adhere to strict Navy and Department of Defense documentation standards, utilizing industry-standard modeling tools such as Visio or Enterprise Architect to produce high-quality reference manuals and diagrams. The project falls under NAICS code 541330 and is centered in the 19112 zip code area. Interested parties should note that the response deadline is October 14, 2026. The primary objective is to ensure that all technical frameworks and manuals are accurately documented to support the operational requirements of the Department of Defense.

Engineering Services

POSTED

DEADLINE

in about 6 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS