Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

NAWCAD LKE Maintenance, Repair, Alteration, Renovation, & Minor Construction

Awarded
N6833526D1006Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, has awarded a Fixed-Price Indefinite Delivery/Indefinite Quantity contract to Teya Support Services LLC, a small business operating under the 8(a) program, for a range of maintenance, repair, alteration, renovation, and minor construction services at its facilities. The award was made on a sole-source basis under federal authorities that permit such procurement for eligible 8(a) contractors, ensuring compliance with statutory requirements. The contract, identified by solicitation number N6833526D1006, was officially posted on May 19, 2026, and is governed under the NAICS code 236220 for building construction. Services under this contract will be performed primarily at the Lakehurst facility located in Cape May Court House, New Jersey, with the contracting office situated at Joint Base MDL, New Jersey. The primary point of contact for contract matters is Mairen Flanagan, reachable via email and phone provided in the official record. The work will support critical infrastructure needs at the naval aviation center under a fixed-price structure, providing cost predictability while allowing flexibility in delivery schedules. This arrangement underscores the Department of Defense’s commitment to leveraging small business capabilities in sustaining essential defense installations.

General Info

Teya Support Services LLC awarded sole-source 8(a) IDIQ contract for maintenance and construction at NAWCAD Lakehurst.

Agency

Department Of Defense → Navair Warfare Ctr Aircraft DivisionView Agency

Contract Value

$0

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

CAPE MAY CH, NJ, 08733, USA

Set-Aside

NONE

Awardee

TEYA SUPPORT SERVICES LLCView Profile

Award Issued Date

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / Agency
Department Of Defense → Navair Warfare Ctr Aircraft Division
View Agency Profile
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more

The Naval Air Warfare Center Aircraft Division (NAWCAD), Lakehurst NJ, awarded a Fixed-Price Indefinite Delivery/Indefinite Quantity (IDIQ) contract to Teya Support Services LLC (CAGE: 8HK11), for Maintenance, Repair, Alteration, Renovation, and Minor Construction Services at NAWCAD Lakehurst. This contract was awarded on a 8(a) sole-source basis in accordance with FAR 6.103-5, 10 U.S.C. 3204(a)(5), Authorized or required by statute.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
SLED
BEQ- Sanitize & Paint Rooms, B4167, Multi Rooms, MASS1, Station
Solicitation # N400857607511
Solicitation N400857607511 is a task order under MACC contract N4008525D for the remediation, preparation, and painting of 22 barracks rooms and associated bathrooms at MCAS Cherry Point, North Carolina. The contractor is responsible for providing all labor, supplies, and equipment to eradicate active microbial growth using EPA-registered disinfectants and antimicrobial solutions. The scope of work includes preparing approximately 18,562 square feet of barracks room surfaces and 3,840 square feet of bathroom surfaces by removing failed paint and applying a heavy-duty, mold-and-mildew-resistant sealing primer. Final finishing requires a minimum of two coats of specialized mold/mildew-resistant paint that matches the existing color and sheen, ensuring a uniform finish without visible patching or roller marks. The project is estimated between 25,000 and 100,000 dollars, with the award based on the lowest price. All work must be completed within 60 calendar days of the award. Proposals were due by September 16, 2026, and must include a completed price proposal form and a list of subcontractors. Bonding requirements vary by proposal value, with payment bonds required for projects between 35,000 and 150,000 dollars. The contractor must comply with the Buy American Act, the Davis-Bacon Act, and FAR 28.307-2 liability insurance requirements. A qualified Quality Control Manager is required to oversee project standards, and all site cleanup must be completed to return the area to its original condition prior to final acceptance by the Contracting Officer's Representative.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 4 days
View Details
NAICS: 236220
New
SLED
DB Construction for HC-130J Flight Simulator Facility at USCG Elizabeth City, NC
Solicitation # 32000479
This design-build project involves the construction of a full motion Weapons System Trainer flight simulator facility for C-130J aircraft at USCG Base Elizabeth City, North Carolina. The approximately 13,000 gross square foot facility will include a simulator bay for a Government Furnish, Government Installed mobile simulator, classrooms, administrative offices, debriefing spaces, and essential support areas for mechanical, electrical, and telecommunications systems. The scope of work extends to site development, including the installation of sidewalks and landscaping, while utilizing existing parking areas. A critical technical requirement is the integration of a Siemens Building Automation System to ensure compatibility with existing installation-wide systems. Issued under the DHS National Multiple Award Construction Contract III, Pool Two, the project has a magnitude estimate of approximately 16 million dollars and a performance period of 719 calendar days. The award is based on a best-value tradeoff selection, weighing price against non-price factors such as planning, organization, communication, and the contractor's specific experience with military or commercial flight simulators. Strict security and compliance protocols are in place, requiring all on-site personnel to be US citizens and necessitating adherence to Davis-Bacon wage determinations, Buy American requirements, and various environmental and historic preservation consultations.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 236220
New
SLED
CP2713M Replace Runway Switches
Solicitation # N400857563909
Solicitation N400857563909 is a task order for the replacement of runway switches at Marine Corps Air Station Cherry Point in Havelock, North Carolina. The scope of work involves the demolition of four existing 15KV S&C pad-mounted air switches and the installation of new S&C pad-mounted SF6 switches on new concrete box pads. Additionally, the contractor must replace existing tee splices in adjacent manholes with dead front junctions in above-ground junction box enclosures. The project is estimated to be valued between 1,000,000 and 5,000,000 dollars, with a required completion period of 240 calendar days after the award. The contract will be awarded based on the lowest price. Proposals are due by 1200 local time on September 17, 2026. Key requirements include adherence to the Buy American Act, Davis-Bacon Act wage determinations, and specific bonding requirements for proposals exceeding 150,000 dollars, which include bid, payment, and performance bonds. The contractor is responsible for providing a QC Manager to oversee acceptance checks and tests in accordance with NFPA 70B, NETA ATS, and ANSI standards. Invoicing is processed via Wide-Area Workflow using NAVFAC forms, and the contractor must comply with specific cybersecurity and safety regulations, including the provision of an Accident Prevention Plan and Activity Hazard Analysis.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 5 days
View Details
NAICS: 236220
New
SLED
Upgrade Life Health Safety Systems in Hangar 250
Solicitation # N400857190530
Solicitation N400857190530 involves upgrading the life health safety systems within Hangar 250 at MCAS Cherry Point, North Carolina. The scope of work includes architectural improvements, modifications to fire alarm and fire protection systems, and the rerouting of plumbing and electrical systems. Because the work will be performed in an occupied facility, the contractor must coordinate closely with base operations and adhere to strict safety and security requirements. The project is estimated to be valued between 1,000,000 and 5,000,000 dollars, with a required completion timeframe of 380 calendar days after the award. The contract will be awarded based on the lowest price, and proposals are due by September 21, 2026. Key requirements include compliance with the Buy American Act, the Davis-Bacon Act, and specific bonding requirements for proposals exceeding 150,000 dollars, which include bid, payment, and performance bonds. Deliverables consist of a facility operating plan, comprehensive data packages for system maintenance, and functional performance test reports. Invoicing is managed through the Wide Area WorkFlow system, and the contractor must submit a detailed schedule of prices within 15 calendar days of the award. Quality control is paramount, requiring the submission and acceptance of a Contractor QC Plan before construction begins.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 236220
New
P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI
Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri
This solicitation by J&J Contractors, Inc. seeks pricing for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The project involves a multi-story 12,920 square foot laboratory and office facility featuring a steel frame, shallow foundations, a metal standing seam roof, and a combination of masonry and metal panel exterior walls. The scope includes comprehensive site preparations and improvements such as underground stormwater retention, utilities, telecommunications, landscaping, and parking. Additionally, Option 1 includes the construction of a separate 17,978 square foot laboratory facility and the demolition of Building 1272T. The contract covers a wide range of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and fire protection. All work must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Interested parties must submit their responses by November 30, 2026, and should contact Rahul Maheshwari to receive the full bid invitation and documentation via Building Connected.
J&J CONTRACTORS, INC.

POSTED

about 4 hours ago

DEADLINE

in 3 months
View Details
NAICS: 236220
New
NJCC Bathroom Renovations for Buildings 17 & 18
Solicitation # njcc-bathroom-renovations-buildings-17-18
Education & Training Resources is soliciting bids for a fee-for-service subcontract to perform comprehensive bathroom renovations at the Northlands Job Corps Center in Vergennes, Vermont. The project involves the complete renovation of four bathroom areas in Building 17, totaling approximately 944 square feet, and five bathroom areas in Building 18, totaling approximately 1,260 square feet. The scope of work includes the demolition of existing fixtures and the installation of institutional-grade acrylic or FRP shower pans, vitreous China toilets, high-pressure laminate countertops, non-slip porcelain flooring, and LED lighting. To maintain center operations, contractors must execute the renovations in a phased sequence, completing one dormitory at a time. Bidders may submit a unified proposal for both buildings or standalone bids for each. Proposals must include a detailed bid sheet with a cost breakdown separating materials and labor, a project schedule specifying calendar days and working hours, current Vermont state professional licensing, and certificates of insurance. The winning bidder must maintain an active registration in Sam.gov with a Unique Entity ID. Award selection is based on technical alignment with the scope of work and risk mitigation rather than the lowest bid. The contract requires strict adherence to ADA, OSHA, and NFPA 101 Life Safety codes, as well as compliance with the Davis-Bacon Act and various FAR clauses, including 100 percent performance and payment bonds. Payment terms are net 30 days upon receipt of a proper invoice and final project acceptance, which requires a signed punch list and applicable warranties.
Northlands Job Corps Center /ETR

POSTED

about 4 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 332912
New
Federal
MQ-25 Oil Drain Attachment
Solicitation # N6833526Q1191
Solicitation N6833526Q1191 is a competitive procurement for Oil Drain Attachments (P/N: 4106AS0315-1, NSN: 4720-01-733-4712) to support the MQ-25 Stingray Unmanned Aircraft Systems Program. The effort is managed by the NAVAIR Warfare Center Aircraft Division and is structured as a single-award, three-year Indefinite Delivery/Indefinite Quantity (IDIQ) firm-fixed-price contract. The period of performance runs from August 31, 2026, to August 30, 2029. This requirement is a 100 percent total small business set-aside. The contract includes multiple CLINs across three ordering years, with a government minimum order of five units. Deliveries are generally preferred within six months of award and are shipped FOB Destination to Joint Base MDL, New Jersey. Key deliverables include the hardware and two Contract Data Requirements List items: a Certificate of Conformance and a Request for Variance. Award will be based on the Lowest Price Technically Acceptable (LPTA) offer, provided the offeror has neutral or acceptable past performance as verified via the Supplier Performance Risk System. Offerors must submit unclassified proposals through the Procurement Integrated Enterprise Environment (PIEE) by September 15, 2026. Required submission elements include a detailed technical description covering the manufacturing approach, a bill of materials, and a narrative demonstrating compliance with the Statement of Work and applicable drawings. Additionally, contractors must meet CMMC Level 2 (Self) cybersecurity requirements and adhere to strict packaging and marking standards, including MIL-STD-130 and MIL-STD-129. Invoicing and payment processing will be conducted electronically through the Wide Area WorkFlow (WAWF) system.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS