Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

New Preventative Maintenance Agreement

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Food and Drug Administration is seeking a new preventative maintenance agreement for a Bruker Biotyper instrument situated in the Micro Surveillance area. This requirement is currently listed as a forecast, indicating the agency's intent to secure professional maintenance services to ensure the continued operational efficiency of the specified equipment. Administrative oversight for this opportunity is managed by the Nctr Acquisition Liaison, with a designated contracting officer to be determined. Interested parties can find further details through the HHS industry opportunity forecast portal.

General Info

FDA seeks preventative maintenance services for a Bruker Biotyper instrument in Micro Surveillance.

Agency

Food and Drug Administration → Food And Drug Administration

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJan 1

forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyFood and Drug Administration → Food And Drug Administration

Contacts2 people available

OfficeN/A

Organization / AgencyFood and Drug Administration → Food And Drug Administration

Office AddressN/A

Contacts

Nctr Acquisition Liaison

contact@example.gov

To Be Determined To Be DeterminedContracting Officer

Full Description

Show more

A preventative maintenance agreement is needed for the Bruker Biotyper instrument located in Micro Surveillance.

Similar Contracts

Same NAICS industry code

Traffic Management System Maintenance

Solicitation # C007167

Solicitation C007167, issued by the Central Florida Tourism Oversight District, seeks a contractor to provide comprehensive maintenance for the District's traffic management system in Florida. The scope of work includes performing inspections, planned maintenance, and emergency repairs, as well as implementing modifications, improvements, and enhancements as directed by the Owner. Specifically, the contractor is responsible for the upkeep of traffic signals, emergency and flasher signals, intelligent transportation systems, signs, and other related traffic management equipment. To ensure operational safety and efficiency, the contractor must maintain readily accessible, sufficiently staffed crews, vehicles, equipment, and materials. All work and materials must meet or exceed the current standards set by the Federal Highway Administration, the Florida Department of Transportation, and the District. The solicitation was posted on October 30, 2026, with a response deadline of November 24, 2026. Bids must be submitted electronically via the PlanetBids platform, and the District provides bid preferences for local vendors, veteran small businesses, and opportunity zone businesses. The primary point of contact for this procurement is Devin Ager.

Central Florida Tourism Oversight District

POSTED

about 14 hours ago

DEADLINE

Specialized Manufacturing Equipment MaintenanceThis subcontract for Specialized Manufacturing Equipment Maintenance involves providing preventative maintenance, calibration, and repair services for metal powder bed fusion systems on Florida State University projects. The scope of work includes critical technical tasks such as laser alignment, optical calibration, mechanical wear inspections, and software updates. To ensure quality and precision, the contract mandates that all work be performed by factory-certified technicians. The selected provider is responsible for delivering comprehensive documentation, including maintenance logs, calibration certificates, and system uptime reports. This opportunity is categorized under NAICS code 811210 and is open for responses until December 7, 2026.

Florida State University

POSTED

about 14 hours ago

DEADLINE

in about 1 month

EDM Machine Commissioning and TrainingThe EDM Machine Commissioning and Training subcontract involves providing specialized technical services for the Texas A&M University System STEM Education Center. The selected contractor will be responsible for the final assembly, system calibration, and execution of test cuts to ensure all tolerances are met. Additionally, the contractor must provide comprehensive hands-on training for CNC controllers and software to ensure personnel are fully operational. To qualify for this engagement, the contractor must utilize manufacturer-certified technicians. The final deliverables for the project include a detailed commissioning report and a staff of trained personnel. Interested parties should note the response deadline of November 13, 2026, for this project categorized under NAICS code 811210.

Texas A&M University System

POSTED

about 14 hours ago

DEADLINE

Third Party Maint. & Support-Mainframe

Solicitation # SRC0000042621

The State of Ohio Department of Administrative Services is soliciting bids for 12 months of pre-paid, third-party extended hardware maintenance and technical support for an IBM zSeries z13 Model N30 mainframe (serial number 516FBE6) located in Columbus, Ohio. The period of performance runs from December 1, 2026, to November 30, 2027, with the possibility for the state to renew the contract for up to three additional one-year terms. The required service level is 24x7x4, covering parts, technical support, and labor for the mainframe, as well as specific components including two Integrated Facility for Linux (IFL) units, two Integrated Coupling Facility (ICF) units, five Integrated Information Processors, one 8-Way CPU CP5, and Z/OS mainframe technical support. This solicitation is strictly limited to Minority Business Enterprise (MBE) dealers who are currently on state contracts RSC024735, RSC021317, RSC021135, 0A1375 (Index GPC033), or STS033, or those who offer the items on an existing state contract. Respondents must provide pricing that is at or lower than the current contract pricing and must include the applicable state contract number in their submission. The selection process will be based on the lowest responsive and responsible MBE quote. All proposals must be submitted using the required grid, as no outside documentation will be considered, and the State Standard Terms and Conditions apply without exception.

Das500000 Office Of Information Technlgy Socc03, Das500000 Office Of Information Technlgy Socc04

POSTED

about 14 hours ago

DEADLINE

AED Program Management and Annual Inspection ServicesThis subcontract for AED Program Management and Annual Inspection Services involves providing comprehensive onsite inspection and program management for prime contractors working on California Department of Industrial Relations facility projects. The scope of work requires the use of specialized testing and diagnostic equipment to conduct annual inspections of approximately 150 AED machines, ensuring all units remain ready for use and fully compliant with OSHA and California DIR standards. The selected provider is responsible for delivering detailed annual inspection reports and maintaining a compliant AED program. This opportunity is categorized under NAICS code 811210, with a response deadline set for November 21, 2026.

California Department of Industrial Relations

POSTED

about 15 hours ago

DEADLINE

Building Management System Maintenance, Repairs, and Services

Solicitation # 2027-RFP-00133

The County of San Mateo Department of Public Works is soliciting proposals under solicitation number 2027-RFP-00133 for a comprehensive maintenance, repair, and service contract for Building Management Systems (BMS) across various county facilities. The scope of work includes routine preventative maintenance, system upgrades, 24/7 technical support, and emergency repairs with a required two-hour response time. Key performance locations include the Regional Operations Center, County Office Buildings 1 through 3, and the Maple Street Correction Facility in Redwood City. The contract is intended for a single vendor for a term of up to five years, with a requirement for bi-monthly inspections of sensors, controllers, and actuators to ensure optimal system reliability and efficiency. Qualified proposers must demonstrate specific technical expertise, including technicians who are certified and trained in the Tridium Niagara BMS and hold active C-10/C-20 licenses. Additionally, vendors must provide proof of registration with the Department of Industrial Relations and adhere to prevailing wage requirements and industry standards such as ASHRAE, ISO, and ANSI. The selection process will be managed by a committee using a points-based scoring system. Proposals must be submitted electronically via the OpenGov eProcurement portal by November 4, 2026. Awarded contractors will be subject to standard county terms, including strict compliance with HIPAA, the Americans with Disabilities Act, and comprehensive insurance requirements for general liability, workers compensation, and professional errors and omissions.

Public Works - Facilities Services - FMO

POSTED

about 20 hours ago

DEADLINE

Ball Valve Teardown, Evaluation, and Level 1 RepairThis subcontract with the Department of Defense for Navsup Weapon Systems Support Mech involves the teardown, evaluation, inspection, and full Level 1 repair of Ball Valve Parts Kits under NIIN 013385191. The scope of work requires executing repairs according to technical drawings, specifically including seat stack height measurements and necessary modifications to restore all components to like-new condition. To ensure quality and precision, the contractor must maintain ISO-9001 or MIL-I-45208 quality systems and adhere to ISO-10012 or ANSI-Z540 calibration standards. The final deliverable consists of fully repaired and certified kits. The response deadline for this opportunity is December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Industrial Control Systems (ICS) MaintenanceThe Industrial Control Systems Maintenance subcontract, issued by the Department of Veterans Affairs National Cmop Office, involves providing specialized electrical and electronic maintenance for controllers and sensors within VA Consolidated Mail Outpatient Pharmacy projects. The scope of work focuses on troubleshooting and repairing industrial controls and electronic controllers integrated into pharmacy automation lines to ensure all systems are calibrated and fully functional. Performance will take place in Chelmsford, Massachusetts, under NAICS code 811210. Due to the technical nature of the environment, all work must strictly adhere to NFPA 70E and NFPA 99 safety standards. Additionally, all assigned personnel are required to pass OIG screening to be eligible for the project.

National Cmop Office (36C770)

POSTED

about 23 hours ago

DEADLINE

Law Enforcement Communications and Radio SupportThe Law Enforcement Communications and Radio Support subcontract, issued by the Department of Defense under the W076 Endist Tulsa agency, focuses on providing essential communication infrastructure for prime contractors working on USACE Pearson-Skubitz Big Hill Lake projects. The scope of work includes the supply and maintenance of mobile and portable radio communications equipment, as well as specialized services such as radio programming, antenna installation, and system troubleshooting to ensure the delivery of fully operational communication links. Technical requirements specify that radio technicians must hold valid FCC licensing to perform the necessary duties. This opportunity falls under NAICS code 811210 and has a response deadline of November 16, 2026.

W076 Endist Tulsa

POSTED

about 23 hours ago

DEADLINE

CNC Installation Supervision and Technical TrainingThis small business set-aside subcontract, managed by the Department of Defense for the Air Force Arnold Engineering Development Complex, focuses on CNC installation supervision and technical training. The selected provider will be responsible for overseeing on-site installations for prime contractors, conducting functional accuracy tests in accordance with ISO/ANSI standards, and delivering two days of initial operator training to ensure personnel are fully qualified. The primary objective of the contract is the delivery of verified functional machine installations and a trained workforce. To maintain operational readiness, the contractor must adhere to a strict warranty repair response time of 36 hours. This effort is categorized under NAICS code 811210 and is associated with the AEDC Pkp Procurement Branch.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 23 hours ago

DEADLINE

in about 1 year

FEI Quanta 650 Microscope Inspection and Preventative MaintenanceThis subcontract involves providing specialized inspection, preventative maintenance, and repair services for a Thermo Fisher Scientific/FEI Quanta 650 Microscope to support prime contractors on C134 agency projects for the Department of Defense at the Portsmouth Naval Shipyard in Kittery. The scope of work requires strict adherence to the FEI Quanta 650 Instruction Manual, including the execution of high-voltage electron column operations and lock-out/tag-out procedures. All activities must comply with OSHA 29 CFR 1910 and established radiation safety guidelines. The selected provider is responsible for delivering critical documentation, including Test/Inspection Reports, Calibration Certificates, and Condition Found Reports. This opportunity falls under NAICS code 811210 and has a response deadline of November 4, 2026.

Portsmouth Naval Shipyard Gf

POSTED

about 23 hours ago

DEADLINE

Quanta 650 Electron Microscope - Inspection, PM, Calibration , and Unscheduled Corrective Repairs.

Solicitation # N3904027SS5844

This requirement is for the inspection, annual preventative maintenance, calibration, and unscheduled corrective repairs of a Thermo Fisher Scientific/FEI Quanta 650 Electron Microscope located at the Portsmouth Naval Shipyard in Kittery, Maine. The scope of work mandates the use of OEM-authorized service technicians and OEM-certified field service engineers with documented training specific to the Quanta 650 platform. All maintenance must utilize new OEM-approved parts, apertures, filaments, and lubricants. Technical performance must adhere to the Thermo Fisher Scientific/FEI Quanta 650 Instruction Manual (Rev C, 2020), with magnification calibration performed in compliance with ASTM E766 standards using an ISO 17025 certified calibration standard. Resolution and image quality must be verified using a gold-on-carbon reference sample. Key deliverables include a Test/Inspection Report, a Calibration Certificate, and a Condition Found Report. The contractor must comply with strict security and safety protocols, including a requirement that all personnel be US citizens and undergo a background check for shipyard access. Safety compliance includes adherence to OSHA 29 CFR 1910 for electrical standards, lock out/tag out procedures, and radiation safety guidelines for high-voltage electron column operation. Additionally, the contract incorporates DFARS 252.217-7028 for the negotiation of over and above work requests and follows U.S. Department of Labor Wage Determination No. 2015-4015 for York County, Maine.

Portsmouth Naval Shipyard Gf

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS