Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NIST Boulder Building 2 1330 Fume Hood Replacement

Awarded

1333ND26CNB190023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Commerce National Institute of Standards and Technology is awarding a contract for the replacement of fume hoods in Building 2, Room 1330, located in Boulder, Colorado. This project falls under NAICS code 236220 and is designated as a total set-aside for small businesses. The procurement is managed by the NIST office based in Gaithersburg, Maryland, with Julie Morris serving as the primary point of contact. The award notice was posted on September 2, 2026, under solicitation number 1333ND26CNB190023.

General Info

NIST small business contract for fume hood replacement in Boulder, Colorado.

Agency

Department Of Commerce Nist

Contract Value

$176,931.47

NAICS

236220 - Commercial and Institutional Building Construction

Place of Performance

Boulder, CO, 80305, USA

Set-Aside

SBA

Awardee

STERLING CONSTRUCTORS LLC

Award Issued Date

10/01/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 2

Award Notice

AwardedOct 1

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

Contacts1 person available

OfficeGAITHERSBURG, MD, 20899, USA

Organization / AgencyDepartment Of Commerce Nist

Office AddressGAITHERSBURG, MD, 20899, USA

Contacts

Julie Morris

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=9d0a6a1d1c5b416da38ef7bd4ddde575

Similar Contracts

Same NAICS industry code

Renovate Inpatient Pharmacy Phase II Loma Linda

Solicitation # 870532

The Design Build contractor is responsible for the complete design and construction renovation of approximately 10,000 square feet on the first floor of Building 1 at the Loma Linda VA Health Care System Hospital. The project encompasses the modernization of the Inpatient Pharmacy, locker rooms, and selective corridors, requiring comprehensive updates to mechanical, electrical, plumbing, fire sprinkler, and fire alarm systems. A critical component of the scope is the management and execution of lead and asbestos abatement across all affected areas prior to demolition and new construction. The pharmacy renovation specifically requires the creation of sterile and non-sterile hazardous drug compounding rooms that strictly adhere to USP 797, USP 800, and VA PG-18-12 standards. Additionally, the locker room updates include full replacement of finishes and fixtures, while the corridor work focuses on ceiling height adjustments, new LED lighting, and seamless HVAC integration. This solicitation, numbered 870532, was posted on October 15, 2026, with a response deadline of October 23, 2026.

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements

Solicitation # construction-recharge-master-plan-update-basin-improvements-project-montclair-basin-improvements-2

The Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements is a solicitation issued by RT Contractor Corp for the Inland Empire Utilities Agency. This project, located in California with a specific focus on the Riverside and Los Angeles project areas, is designated as a set-aside for Disadvantaged Business Enterprises (DBE) under the Department of Transportation. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026. A critical component of this contract is strict adherence to six Good Faith Effort (GFE) requirements designed to secure project financing and expand upon State Water Resources Control Board standards. Bidders must provide proof of publicity, including online postings for 30 consecutive days and a one-day print newspaper advertisement, as well as evidence of utilizing the Small Business Administration and Minority Business Development Agency. These specific documents must be submitted with the bid package to avoid being deemed non-responsive. Additionally, documentation of DBE outreach may be submitted up to three business days after the bid closing date. Failure to comply with these GFE mandates will result in the disqualification of the proposal.

RT CONTRACTOR CORP

POSTED

about 6 hours ago

DEADLINE

Cape Cod Space Force Microgrid Power Station - Bourne, MA

Solicitation # cape-cod-space-force-microgrid-power-station-bourne-ma

J&J Contractors, Inc. is soliciting bids for the Cape Cod Space Force Microgrid Power Station project located in Bourne, Massachusetts. The comprehensive scope of work encompasses a wide range of trades, including sitework, masonry, structural steel, miscellaneous metals, metal paneling and siding, roofing, drywall, flooring, painting, fire protection, plumbing, mechanical, and electrical services. This project is designated as an SBA set-aside, making it available to various small business categories, including SDB, WOSB, HUBZone, and VOSB certifications. Interested parties must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. The solicitation was posted on October 21, 2026, with a response deadline of October 30, 2026. To receive a formal bid invitation via Building Connected, applicants should contact Rahul Maheshwari directly via email.

J&J CONTRACTORS, INC.

POSTED

about 6 hours ago

DEADLINE

Weapons Magazine

Solicitation # weapons-magazine

This solicitation, titled Weapons Magazine and issued by Sauer Construction, seeks contractors for a project located in Virginia. The scope of work is comprehensive, encompassing site work, access roads, and specialized foundation requirements including piling and rigid inclusions. Additionally, the project requires the installation of primary and secondary electrical systems, grounding, lighting protection, and ids. The opportunity is designated as a set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of November 15, 2026. The primary point of contact for this solicitation is David Phillips.

Sauer Construction

POSTED

about 6 hours ago

DEADLINE

AMC-0194 GPT ATCT Public Announcement

Solicitation # amc-0194-gpt-atct-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons) for work in Mississippi, covers a wide range of facility improvements and repairs. The scope of work includes electrical corrections such as grounding and SPDS replacement, mechanical repairs involving copper piping and chilled water systems, and civil reinforcements including gate and foundation repairs. Additionally, the project requires structural repairs like epoxy injection and painting, as well as architectural upgrades such as floor tile replacement, window sealing, and gutter installation. The estimated magnitude of construction for this project is between 500,000 and 1,000,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications. Interested parties must respond by November 18, 2026, under solicitation number amc-0194-gpt-atct-public-announcement.

PTSI Managed Services Inc. (Parsons)

POSTED

about 6 hours ago

DEADLINE

P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI

Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri

J&J Contractors, Inc. is soliciting bids for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The project involves the creation of a 12,920 square foot multi-story steel frame laboratory and office facility featuring a shallow foundation, metal standing seam roof, and masonry and metal panel exterior walls. Additionally, Option 1 includes a separate 17,978 square foot laboratory facility with similar structural specifications and the demolition of Building 1272T, a 548 square meter engineering facility. The scope of work encompasses comprehensive site improvements, including landscaping, parking, exterior lighting, telecommunications, and underground stormwater retention systems. Pricing is requested across a wide range of trades, including demolition, abatement, concrete, masonry, structural steel, mechanical, electrical, plumbing, and fire protection. This is an SBA set-aside solicitation for small businesses and other designated disadvantaged business categories. All work must adhere to Davis Bacon Wage Rates and is exempt from sales tax. Interested parties must contact the primary point of contact to receive the formal bid invitation and documents via Building Connected before the response deadline of November 30, 2026.

J&J CONTRACTORS, INC.

POSTED

about 6 hours ago

DEADLINE

in about 1 month

CITY OF GREENFIELD WASTEWATER TREATMENT PLANT UPGRADE PROJECT

Solicitation # city-greenfield-wastewater-treatment-plant-upgrade-project

The City of Greenfield Wastewater Treatment Plant Upgrade Project involves the construction of a new 2.0 million gallons per day wastewater treatment plant located at 41901 Walnut Avenue in Greenfield, California. The project scope is divided into four distinct phases: site preparation including soil stabilization and facility relocation; construction of the plant featuring a packaged Membrane Bioreactor, headworks, UV disinfection, SCADA systems, and various support buildings; decommissioning and demolition of existing facilities; and finish facilities including the Walnut Avenue extension and a second sludge handling unit. The total duration for the project is 915 calendar days, with a critical requirement to maintain existing plant services and regulatory compliance throughout the first two phases. Managed by C. Overaa & Co., the solicitation is open to various small and disadvantaged business enterprises, including DBE, SDVOSB, and WOSB. A significant local hiring goal requires that 50 percent of the total construction workforce be residents of Monterey, San Benito, or Santa Cruz counties. Subcontractors must utilize the Textura electronic invoicing system and agree to the Overaa standard agreement without modification. Bids are due by November 10, 2026, following a mandatory pre-bid meeting held on October 5, 2026. Performance and labor bonds for 100 percent of the subcontract price may be required, and all subcontractors must provide a waiver of subrogation endorsement for workers compensation insurance.

C. Overaa & Co.

POSTED

about 6 hours ago

DEADLINE

ILLINOIS STATE UNIVERSITY SOUTH CAMPUS HOUSING & DINING

Solicitation # illinois-state-university-south-campus-housing-dining

This solicitation is for the Illinois State University South Campus Housing and Dining project, managed by River City Construction, LLC. The project falls under NAICS code 236220 and will be performed in the state of Illinois. Interested parties must submit their responses by the deadline of October 29, 2026, at 2:00 PM. The opportunity is designated as a set-aside for various small business categories, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Primary inquiries and bid submissions should be directed to Justin Beaty via email at bid@rccllc.com or by phone at 309-694-3120.

River City Construction, LLC

POSTED

about 6 hours ago

DEADLINE

Solicitation # sof-armory

Sauer Construction is seeking bids for the SOF Armory project located in North Carolina. This solicitation is open to all construction trades under NAICS code 236220. Interested parties must submit their responses by the deadline of November 30, 2026. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Primary coordination for this project is handled by Adam Houck, and further details can be accessed through the official SBA opportunity link.

SAUER CONSTRUCTION

POSTED

about 6 hours ago

DEADLINE

in about 1 month

P1102 Weapons Magazine and Ordnance Operations Facility, Naval Submarine Base New London, Groton, Connecticut

Solicitation # p1102-weapons-magazine-ordnance-operations-facility-naval-submarine-base-new-london-groton

J & J Contractors, Inc. is soliciting bids for the P1102 Weapons Magazine and Ordnance Operations Facility project located at the Naval Submarine Base New London in Groton, Connecticut. This comprehensive construction project has a duration of 1828 calendar days and involves the creation of six Containerized Long Weapons Storage units, two Box G magazines, and one Box H earth-covered high-explosive magazine. The scope includes the installation of overhead cranes, reinforced concrete floors, grounding and lightning protection, and intrusion detection systems. Additionally, the project requires the construction of a new Ordnance Operations building, a Truck Inspection facility, and a Sentry building, alongside the demolition of 18 existing magazines and two other buildings. The technical requirements encompass extensive sitework, including clearing, rock excavation, grading, and the implementation of rigid inclusions and load transfer mats for foundations. Due to the impact on existing wetlands, mitigation efforts are required. Infrastructure improvements include new access roads, paved loading areas, landscaping, and a complete electrical utility system featuring primary and secondary distribution, transformers, and telecommunications. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB. Interested parties must respond by October 31, 2026.

J & J Contractors, Inc

POSTED

about 6 hours ago

DEADLINE

ADA and Title 24 Compliance Audit/ModificationThis subcontract, managed by the California Department of General Services, focuses on ADA and Title 24 Compliance Audits and Modifications. The selected provider will perform accessibility audits and install necessary modifications for property owners who lease space to the California Department of Rehabilitation. Key deliverables include conducting site surveys and implementing architectural changes such as the installation of ramps, modified restrooms, and compliant signage. All work must be executed using ADA-compliant hardware and must strictly adhere to the California Building Code and the Americans with Disabilities Act. The ultimate goal of the contract is to deliver fully ADA-compliant facilities accompanied by the required certifications. Interested parties should note the response deadline of November 4, 2026.

California Department of General Services

POSTED

about 13 hours ago

DEADLINE

Solicitation # 49278

The Ohio Department of Rehabilitation and Correction is seeking proposals for the FMC Medical Cleanroom Renovation project located at Franklin Medical Center in Columbus, Ohio. This solicitation, identified as DRC-25L359 under solicitation number 49278, falls under NAICS code 236220 for commercial and institutional building construction. Interested parties must submit their responses by the deadline of October 27, 2026, at 6:00 PM. The project is managed by the state of Ohio and is categorized as a SLED organization procurement. Detailed solicitation information and submission guidelines are available through the Bid Express portal.

Ohio Department of Rehabilitation and Correction

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Building 215 Clean Room HEPA Filter Replacement

Solicitation # RFI-195000-26-00181

The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.

Industrial Building Construction

POSTED

DEADLINE

Optional Leak Check System SupplyThis contract involves the supply of an optional high-sensitivity leak detection system designed to verify the hermetic seal integrity within a microfluidic TEM cell. The primary focus is to provide a reliable solution that ensures the cells remain sealed, which is crucial for maintaining the integrity and performance of these specialized devices. The contract is classified under NAICS code 334511, indicating its association with electromedical and electrotherapeutic apparatus manufacturing. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and is to be performed in Gaithersburg, Maryland, with the ZIP code 20899. Although specific solicitation details and set-aside statuses are not provided, the project emphasizes precision and quality in leak detection technology to support advanced microfluidic applications. This system will likely enhance the reliability and accuracy of microfluidic experiments or operations conducted using the TEM cell.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Installation and Training ServicesThe contract involves the on-site installation of a Transmission Electron Microscope (TEM) holder at the National Institute of Standards and Technology (NIST) facility located in Gaithersburg. Along with the installation, the contractor is responsible for providing comprehensive operator training to ensure proper use and maintenance of the equipment. This subcontract, classified under NAICS code 541330, supports specialized professional services related to the setup and operational readiness of high-precision scientific instruments. Issued by the Department of Commerce, NIST, the contract ensures that the TEM holder is installed at the specified Gaithersburg location, with a focus on delivering both technical installation and in-depth training. This dual service approach is designed to enhance user proficiency and optimize the performance of the equipment, supporting NIST’s mission of advancing measurement science. The contract was posted in May 2026 and is accessible through the System for Award Management (SAM) platform.

Engineering Services

POSTED

DEADLINE

Real-Time Sample Correction Software DevelopmentThe contract involves the development and integration of specialized software designed to provide real-time correction for sample drift during Transmission Electron Microscopy (TEM) imaging, thereby ensuring imaging stability. This work is categorized under the NAICS code 541512, which relates to computer systems design services. The contract is a subcontract issued by the Department of Commerce, specifically through the National Institute of Standards and Technology (NIST). The project is set to be performed in Gaithersburg, with a focus on enhancing the precision and reliability of TEM imaging by addressing sample drift issues in real time. While specific financial or timeline details are not provided, the contract aims to support advanced scientific research through improved imaging software, reflecting the Department of Commerce's commitment to technological innovation in measurement and standards.

Computer Systems Design Services

POSTED

DEADLINE

Integrated Fluid Delivery System SupplyThis contract entails the supply of an integrated fluid delivery system designed for precise fluid management during transmission electron microscopy (TEM) experiments. The system enables in-situ solution exchange and degassing, which are critical for maintaining experimental accuracy and fluid integrity under the microscope. The contract is classified under the NAICS code 333992, indicating its focus on fluid power valve and hose fitting manufacturing, emphasizing the technical specificity required. The subcontract is issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and calls for performance in Gaithersburg, Maryland, ZIP code 20899. Specific details such as the solicitation number or set-aside type were not indicated. This procurement reflects the agency’s commitment to advancing experimental capabilities in scientific research by integrating sophisticated fluid handling systems directly into microscopy workflows.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Electrochemical Liquid TEM Holder SupplyThe contract entails the supply of a specialized electrochemical liquid transmission electron microscopy (TEM) holder designed to facilitate operando imaging of material dynamics. This advanced TEM holder incorporates integrated heating and cooling functionalities, enabling precise temperature control during imaging processes. The equipment is intended to support detailed analysis of material behaviors under electrochemical conditions in real time. Issued by the Department of Commerce’s National Institute of Standards and Technology (NIST), the subcontract falls under the NAICS code 334516, which pertains to analytical laboratory instrument manufacturing. The performance location is specified as Gaithersburg, with a ZIP code of 20899. The contract was posted on May 20, 2026, and although some logistical details such as solicitation number and point of contact are not provided, the primary goal is the procurement of this customized TEM holder to enhance research capabilities in material science.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Handling and Packaging of Micro SpecimensThis contract involves the development of specialized protocols for the safe handling, storage, and shipping of fragile micro specimens. The work focuses on creating custom fixtures designed to securely hold these delicate items, alongside implementing environmental protection measures to ensure their integrity during transportation and storage. The objective is to mitigate risks associated with damage caused by improper handling or adverse conditions. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. It falls under the NAICS code 488490, which pertains to specialized freight trucking services. The project was posted on May 6, 2026, and aims to enhance precision in the packaging and transportation of micro-scale specimens, ensuring they reach their destinations safely and remain viable for their intended scientific use.

Other Support Activities for Road Transportation

POSTED

DEADLINE

Materials Characterization and Quality Validation ServicesThis contract involves the independent verification of micro specimen properties, focusing on microstructure, composition, and mechanical behavior analysis. The services include comprehensive reporting and ensuring traceability throughout the verification process. It is classified under subcontracting and pertains to materials characterization and quality validation, intended to support high standards in material assessment. The contract falls under the NAICS code 541380, aligning with testing laboratories and related services. It is administered by the Department of Commerce's National Institute of Standards and Technology (NIST) and performed in Gaithersburg, Maryland, ZIP code 20899. The work is designed to enhance the accuracy and reliability of material property data, which is critical for subsequent research and development initiatives or quality assurance in manufacturing processes.

Testing Laboratories and Services

POSTED

DEADLINE

Micro-Sized Lead-Free Solder Specimen FabricationThe contract involves the fabrication of micro-sized lead-free solder specimens specifically designed for fracture testing in advanced packaging applications. The focus is on producing specimens with precisely controlled composition and microstructure to meet the requirements for evaluating the mechanical performance of solder materials in microelectronics. This work is crucial for advancing reliable lead-free solder technologies that comply with environmental regulations and enhance device durability. Issued by the Department of Commerce's National Institute of Standards and Technology (NIST), the subcontract aims to support research and development efforts within the advanced packaging industry. The place of performance is Gaithersburg, Maryland, highlighting a location known for its concentration of scientific research. The contract aligns with NAICS code 334419, which pertains to other electronic component manufacturing, indicating that this effort supports manufacturing-related innovation.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Microfabrication of Electroplated Copper Micro SpecimensThis contract involves the design and fabrication of free-standing micro-scale copper specimens with highly controlled geometry, microstructure, and grain size to closely mimic semiconductor interconnects for mechanical testing purposes. The work requires precision microfabrication techniques, focusing on electroplated copper to replicate the physical and material properties of actual semiconductor components used in reliability assessments. The ultimate goal is to provide accurate test specimens that can aid in advancing the understanding of mechanical behavior in microelectronic materials. The subcontract is issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. The solicitation aligns with NAICS code 334418, indicating a focus on electronic instrument manufacturing. This effort supports the development of standardized testing methodologies by ensuring that specimens closely replicate real-world interconnect conditions at the micro-scale level.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Building Automation and Controls EngineeringThis contract involves providing engineering design and integration services focused on building automation, controls, and energy management systems tailored for laboratory and office settings. It is a subcontract opportunity under a Total Small Business Set-Aside program, aligned with NAICS code 541330, which covers engineering services. The contract is associated with the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), and the work will be performed in Gaithersburg, Maryland, ZIP code 20899. The primary objective is to support NIST by delivering expert services that enhance building system efficiency and integration in controlled environments such as labs and offices. This contract emphasizes small business participation and aims to leverage specialized engineering expertise to improve automation and energy management in government facilities.

Engineering Services

POSTED

DEADLINE

Elevator Modernization EngineeringThe contract involves providing engineering services for the modernization and upgrade of elevator systems within NIST facilities, focusing on design, specifications, and ensuring compliance with relevant accessibility and safety standards. It is a subcontract opportunity under a Total Small Business Set-Aside, adhering to FAR 19.5 regulations, specifically falling under NAICS code 541330, which covers engineering services. The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is the contracting agency, with the work to be performed in Gaithersburg, Maryland (zip code 20899). The contract aims to enhance the reliability, safety, and accessibility of elevator systems at the facilities, aligning with federal standards and requirements.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS