Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on January 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Non-Destructive Testing (NDT) – Penetrant Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541350
New
SLED
Asset Management Physical Site Inspection Services
Solicitation # BPM047098
The Maryland Department of Housing and Community Development is soliciting proposals under solicitation BPM047098 for a vendor to provide physical property inspections of multi-family housing projects assisted by Department financing. This indefinite quantity contract with fixed unit prices features a three-year base period and covers an estimated 100 to 200 properties annually across the State of Maryland. All inspections must adhere to the National Standards for the Physical Inspection of Real Estate (NSPIRE), and all performing personnel must be NSPIRE certified. Key deliverables include the submission of exigent health and safety hazard notifications within 24 hours of inspection, and the entry of all findings into the Multifamily Asset Management System and the submission of a final PDF report within 15 calendar days. Proposals must be submitted electronically via eMaryland Marketplace Advantage (eMMA) in two separate volumes: a technical proposal and a financial proposal. The evaluation process weights technical and financial factors equally, with technical criteria focusing on the work plan, staff qualifications, offeror capabilities, and economic benefit to the state. The financial proposal requires a pricing matrix based on project size, type, and region. The procurement includes a 20 percent MBE subcontracting goal. Following two amendments, the final response deadline is November 30, 2026, at 4:00 p.m. local time.

POSTED

3 days ago

DEADLINE

in 14 days
NAICS: 541350
New
Federal
H399--36C242-27-AP-0524| 528-27-1-6893-0009 Elevator Inspections, VA Medical Center (VAMC) & Bath VA Medical Center (VAMC)
Solicitation # 36C24227Q0041
The Department of Veterans Affairs Network Contracting Office 02 is soliciting quotations for QEI-Certified Inspector services to act as third-party witnesses for annual and semi-annual elevator safety inspections and testing at the Canandaigua and Bath VA Medical Centers in New York. This combined synopsis and request for quotation is a set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS 541350. The scope of work includes witnessing semi-annual inspections, annual pressure tests for hydraulic elevators, and annual no-load tests for traction elevators, as well as five-year full-load tests for traction elevators scheduled for Bath VAMC in Option Year 1 and Canandaigua VAMC in Option Year 2. All services must comply with the most current editions of ASME A17.1 and ANSI/ASME 17.2, with results documented on VA Form 10-6167. The contract structure consists of a 12-month base period and four 12-month option years, with a revised start date of December 1st for all periods. Performance is typically expected during April and October. Award will be made based on a comparative evaluation of technical capability, past performance, and price to determine the most advantageous offer to the government. Offerors must provide a technical capability statement of no more than 10 pages and certify compliance with limitations on subcontracting, ensuring no more than 50 percent of the contract value is paid to firms that are not certified SDVOSBs or VOSBs. Labor rates must adhere to U.S. Department of Labor Wage Determination No. 2015-4161 for the applicable New York counties.
242-NETWORK Contract Office 02 (36C242)

POSTED

4 days ago

DEADLINE

in about 14 hours
NAICS: 541350
New
Federal
Pallet Rack Inspection
Solicitation # 36C77027Q0021
The Department of Veterans Affairs, through the National CMOP Office, is seeking sources for a firm fixed price contract to provide professional pallet rack inspection, engineering analysis, safety training, and corrective repair services at the Mid-South Consolidated Mail Outpatient Pharmacy (CMOP), Station 764 in Murfreesboro, Tennessee. The scope of work involves conducting one comprehensive annual inspection and engineering assessment of approximately seventy-five pallet rack bays, providing as-needed physical repairs to restore load-bearing capacity, and delivering annual rack safety awareness training for up to twenty personnel. Key deliverables include engineering assessments, load-capacity calculations, deficiency documentation, and the installation of required load-capacity plaques. The contract is structured with a base year running from December 1, 2026, to November 30, 2027, followed by four option years extending through November 30, 2031. All services must adhere to strict safety and industrial standards, including OSHA regulations, ANSI MH16.1-2021, and RMI guidance. Engineering certifications and calculations must be signed and sealed by a licensed Professional Engineer. Performance will be monitored by the Contracting Officer's Representative via a Quality Assurance Surveillance Plan, with acceptance of repairs required prior to invoicing. Interested parties under NAICS 541350 must submit their company details, size status, and federal contract information to Diana Olson by November 20, 2026.
National Cmop Office (36C770)

POSTED

4 days ago

DEADLINE

in 4 days
NAICS: 541350
New
SLED
Inspector Of Record For The Playground Replacement At Fremont Elementary School
Solicitation # 17
The Montebello Unified School District is soliciting experienced firms to serve as the Inspector of Record for the playground replacement and site work at Fremont Elementary School in Montebello, California. The selected firm will provide comprehensive DSA inspection services to ensure the installation and certification of new playground structures, shade structures, and accessible parking comply with all state and local regulations. Key responsibilities include verifying structural tests and special inspections for soils, concrete, masonry, steel, and wood elements, specifically adhering to CBC and DSA standards for reinforcing bar testing, batch plant inspections, and retaining walls. The contract award will be based on the lowest cost proposal, provided the bidder demonstrates the ability to comply with specifications and offers the best overall value. The total contract value is capped at the Public Contract Code section 20111 limit of 119,100 dollars. Bidders must submit a fully burdened scope of work, a detailed experience summary with three references, and required certifications including a Non-Collusion Affidavit and employee clearance. Mandatory requirements include DIR contractor registration for prevailing wage enforcement, professional liability insurance, and specific coverage for sexual abuse and molestation. Payment and performance bonds are required for quotes exceeding 25,000 dollars.
Montebello Unified School District

POSTED

5 days ago

DEADLINE

in 2 days
NAICS: 541350
New
SLED
Home Inspection and Rehab Coordinator Services
Solicitation # 2140792
The Franklin County Economic Development Corporation (FCEDC) is soliciting proposals to establish a panel of qualified Home Inspection and Rehab Coordinator firms to support Housing Trust Funding Corporation (HTFC) grant projects across Franklin County, New York. The contract is designed for services provided on an as-needed basis, with an anticipated volume of 20 to 25 projects in 2027 and additional projects in 2028. Multiple awards may be made to firms that achieve a composite score of 75 points or higher based on an evaluation of project experience and capacity, approach and methodology, and key personnel. The procurement includes Minority and Women Business Enterprise (MWBE) goals of 10 percent for both MBE and WBE participation, and subcontracting is permitted. Proposals must be submitted in PDF format via email to the designated contact by 5:00 PM on December 14, 2026, with a target selection date in January 2027. Required submission materials include a firm overview, detailed project experience, resumes and certifications for key personnel, a description of the firm's methodology, and a comprehensive rate schedule. Pricing submissions must include a methodology for travel expenses, noting that any itemized mileage reimbursement cannot exceed the current IRS standard mileage rate. Once awarded, services will be billed to the FCEDC with payments issued within 30 days.
Franklin County Economic Development Corporation

POSTED

5 days ago

DEADLINE

in 27 days
NAICS: 541350
New
SLED
ADA Transition Plan Self-Evaluation and Barrier Removal/Transition Plan
Solicitation # RFQ-27-0002
East Texas A&M University is soliciting statements of qualifications under RFQ-27-0002 for a firm to conduct a comprehensive accessibility evaluation of its main campus facilities in Commerce, Texas. The primary objective is the development of a prioritized ADA Transition Plan, also known as a Self-Evaluation and Barrier Removal/Transition Plan, to ensure compliance with Title II of the ADA, Texas Accessibility Standards, and Section 504 of the Rehabilitation Act of 1973. The scope is strictly limited to physical facilities and excludes programs or services. Key deliverables include a detailed inventory of barriers documented with photographs and measurements, a five to ten year implementation schedule, rough order of magnitude cost estimates for remediation, and policies for ongoing monitoring and annual updates. The anticipated contract term is three years with two optional one-year renewals. Selection will be based on a strengths and weaknesses evaluation of the respondent's demonstrated competence, experience in higher education ADA compliance, and ability to provide quality, cost-effective services. Submissions must be delivered as a single PDF file by November 18, 2026, and must include a qualification statement limited to 40 pages, key personnel resumes, and various certifications, including VetHUB participation and compliance with Texas Government Code. The university intends to qualify a single firm, though it reserves the right to select multiple firms if deemed in its best interest.
East Texas A&M University

POSTED

5 days ago

DEADLINE

in 1 day
NAICS: 541350
New
SLED
Residential Rehabilitation Assessment & Construction Management Services
Solicitation # 26-28
Rockdale County is soliciting proposals for residential rehabilitation consultants to support the Repair and Revitalize Program through the provision of property assessments, repair specifications, cost estimates, construction procurement support, monitoring, and project closeout services. The selected consultant will ensure that owner-occupied, single-family homes receive safe, code-compliant repairs in accordance with the CHIP grant, Georgia DCA requirements, and federal HOME regulations. The scope of work includes identifying health and safety deficiencies, developing bid packages, conducting site visits to monitor construction conformance, and managing final inspections and punch lists. This independent contractor agreement features a base term with two optional one-year extensions. Award selection is based on a best-value trade-off between past performance, quality, and price, with a five-point preference given to local Rockdale County vendors. Contractors must comply with HUD Section 3 and Davis-Bacon labor standards, and failure to submit the required HUD Section 3 certification will result in a non-responsive proposal. Proposals must be submitted in Adobe PDF format on a USB flash drive by December 10, 2026. Payment is issued within thirty days of an undisputed invoice, and the contract utilizes fixed unit pricing for services such as initial inspections, work-up write-ups, and closeout requests.
Rockdale County Board of Commissioners

POSTED

6 days ago

DEADLINE

in 24 days
NAICS: 541350
New
SLED
Fire Sprinkler System Inspections at Southwest Florida International Airport
Solicitation # 2026-089-AM
The Lee County Port Authority is soliciting fixed lump-sum quotes for comprehensive fire sprinkler system inspections at the Southwest Florida International Airport under solicitation 2026-089-AM. The scope of work involves quarterly inspections of 31 sprinkler systems and associated control valves located across the Arrival, Departure, Mezzanine, and fourth floors. These services include two visual evaluations to be conducted during daytime business hours and two physical evaluations to be performed after hours. The contractor is responsible for testing fire pumps, backflow preventers, and specialized suppression systems in accordance with NFPA 25 and other industry standards, though they are not responsible for correcting identified deficiencies or updating zone maps. The submission deadline has been extended via two addenda to November 17, 2026, at 2:00 PM EST, with all proposals required to be uploaded via the OpenGov portal. Awardees must meet strict insurance requirements for general liability, automobile, professional, and pollution liability, as well as comply with Florida statutory nondiscrimination and scrutinized companies certifications. Payment is executed on net 45 calendar-day terms, with invoicing permitted on a quarterly basis. While no current budget ceiling is provided, the contract requires adherence to OSHA best practices and federal aviation nondiscrimination statutes.
Maintenance Systems

POSTED

6 days ago

DEADLINE

in about 12 hours
NAICS: 541350
New
SLED
HQS and NSPIRE Inspection Services
Solicitation # 27-003
The Sanford Housing Authority is soliciting proposals for HQS and NSPIRE Inspection Services under RFP No. 27-003 to support its Housing Choice Voucher program and Public Housing portfolio across Lee and Harnett Counties, North Carolina. The selected contractor will provide all labor, personnel, and mobile technology to perform inspections of inside units, outside areas, and common areas. The contract has an initial term of two fiscal years and requires all inspectors to be NSPIRE-certified and pass a background check. Performance standards include strict timelines, such as scheduling initial inspections within 10 business days of referral, delivering electronic reports within 24 hours of inspection, and providing same-day notification for life-threatening deficiencies. Proposals will be evaluated on a 100-point scale, with weights distributed among pricing (20 points), relevant experience and past performance (30 points), approach and engagement (25 points), and organizational capacity and staffing (25 points). The agency intends to award the contract to the top-ranked responsible proposer. Submissions must be made electronically via the eProcurement Marketplace by December 3, 2026, and must not contain pricing information within the proposal file, as fees are submitted separately through the portal. Required documentation includes a firm profile, EEO policy, and various HUD certifications regarding drug-free workplaces, debarment, and lobbying activities.
Sanford Housing Authority

POSTED

7 days ago

DEADLINE

in 16 days

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense through DLA Maritime - Portsmouth, requires non-destructive testing services for machined quill components. The selected provider must perform Type I penetrant testing in strict accordance with ASTM E1417-21 standards, with a quality requirement of zero allowable defects. The scope of work includes the submission of test results and the formal approval of procedures. Performance of these services will take place in Kittery, Maine. Interested parties must respond by February 4, 2026.

General Info

NAICS

541350 - Building Inspection Services

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

NONE

Documents

This scope was carved out of SPMYM326Q7003.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Quill

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • PRO - RFP 2911 Building Permit Plan Review ServiceOpen now, due in 11 days
  • Asset Management Physical Site Inspection ServicesOpen now, due in 14 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Portsmouth
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform penetrant testing (PT) on machined quill components per ASTM E1417-21, Type I, with zero defects allowed, including procedure approval (A003) and test results submission (A004).

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

NAICS: 332722
New
Federal
Hardware
Solicitation # SPMYM327Q4011
The Department of Defense, through DLA Maritime Portsmouth, is soliciting quotes for hardware, specifically two alloy steel grade-B16 hex head capscrews (PC-4), as part of a total small business set-aside. This procurement is conducted as a commercial item acquisition under FAR Part 12 using Simplified Acquisition Procedures. The government's required delivery date is December 3, 2026, and the deadline for submissions is November 30, 2026. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical submissions rated as either acceptable or unacceptable. The contract includes stringent packaging and marking requirements, mandating adherence to ASTM D-3951 for commercial packaging and MIL-STD-129 for shipment marking. Prohibited materials include asbestos, excelsior, and loose fill polystyrene. Contractors must utilize the DLA Vendor Shipment Module for bar-coded labels and provide specific traceability numbers for controlled industrial materials. Payment is handled via Wide Area Workflow (WAWF) on a Net 30 basis, with payments issued via Government purchase card. Security and compliance are critical, with requirements for safeguarding unclassified controlled technical information and compliance with the Cybersecurity Maturity Model Certification (CMMC). Offerors must provide CMMC unique identifiers and adhere to restrictions on covered telecommunications equipment, specifically prohibiting vendors such as Hytera, Hikvision, and Dahua. All provided hardware must be new and unused, and the government reserves the right to reject any nonconforming material via a Product Quality Deficiency Report.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
Federal
Screws
Solicitation # SPMYM327Q5008
Solicitation SPMYM327Q5008 is a combined synopsis and request for quotation issued by DLA Maritime Portsmouth for the procurement of various self-locking capscrews for the Portsmouth Naval Shipyard. The requirement includes hex head, socket head, and socket flat head self-locking capscrews, with specific material requirements such as Nickel Copper Aluminum (K-Monel) and compliance with standards including MIL-DTL-1222J and FF-S-86E. This is a 100 percent Small Business Set-Aside under NAICS code 332722, with a small business standard of 600 employees. The government intends to make a single all-or-none award based on the Lowest Price Technically Acceptable (LPTA) evaluation criteria, utilizing the Supplier Performance Risk System (SPRS) to determine vendor responsibility. The government required delivery date is February 1, 2027, with shipping terms set as FOB Destination to Kittery, Maine. Offerors must provide a Certificate of Compliance and specific material certification data reports as outlined in the Contract Data Requirements List. Mandatory submission requirements include the completed RFQ 27Q5008 form and provisions 252.204-7016 and 252.204-7019. Quotes must be submitted via email to the designated points of contact by November 25, 2026, at 3:00 PM EST. Payment will be processed via Wide Area Workflow (WAWF) or Government Purchase Card with Net 30 terms. All offerors must be registered in the System for Award Management (SAM) and provide the place of manufacture and country of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 331221
New
Federal
Panduit Strapping
Solicitation # SPMYM327Q3000
The Portsmouth Naval Shipyard, through DLA Maritime, is soliciting quotes for 100 rolls of nylon-coated stainless strapping, part number NCMSCNW50T20CR4. This requirement is a 100% Small Business Set-Aside under NAICS code 331221 and is brand name mandatory to Panduit, as they are the only NAVSEA approved manufacturer. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, and vendor responsibility will be determined using the Supplier Performance Risk System (SPRS). Offerors must provide descriptive literature to demonstrate technical compliance and complete the required provisions, including 252.204-7016, or risk being deemed technically unacceptable. The contract specifies strict packaging and marking standards, requiring compliance with ASTM D-3951 for commercial packaging and MIL-STD-129 for military items. Prohibited materials include asbestos, excelsior, yellow wrapping, and loose-fill polystyrene. Delivery is to be made to the Portsmouth Naval Shipyard, where carrier drivers must be U.S. citizens or provide evidence of naturalization. Payment is set at Net 30 days, with the primary invoicing method being Wide Area Workflow (WAWF), although Government Purchase Card (GCPC) is an available payment instrument. All quotes must be submitted by November 20, 2026, and include the CAGE code, business size, and preferred payment method.
Rolled Steel Shape Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
ASSORTED CAP SCREWS (CMMC LEVEL 1 REQUIRED)
Solicitation # SPMYM327Q2007
The Portsmouth Naval Shipyard is soliciting quotes for assorted cap screws under RFQ SPMYM327Q2007. This procurement is a 100% Small Business Set-Aside under NAICS code 332722 and FSC code 5305. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, with vendor responsibility determined via the Supplier Performance Risk System (SPRS). The required delivery date is April 20, 2027, and the solicitation closes on November 24, 2026. Technical requirements specify that the cap screws must be manufactured in accordance with FF-S-86J Type IV, using NICU material per QQ-N-281D Amend 2, and must be self-locking per MIL-DTL-18240F Amend 1 Type L or P. Deliverables include the hardware, a Certificate of Compliance, and a Certification/Data Report containing quantitative chemical and mechanical test results. All items must be marked with a material symbol, manufacturer's symbol, and lot number, with a specific requirement for six dots on the fastener head. A critical requirement for this contract is CMMC Level 1 (Self) certification; quotes from offerors without the appropriate CMMC level will not be considered. Additionally, offerors must complete and submit provision 252.204-7016 with their proposal. Inspection and acceptance will occur at the destination. Payment is handled via Government Purchase Card or Wide Area Workflow (WAWF) on a Net 30 basis after material acceptance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS