Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 29, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Notice of Intent to Sole Source FARO Maintenance Agreement

Closed
FA9101-22-Q-0052Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and the clutch release spring, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the PTO system operates correctly under load. This is a small business set-aside solicitation under NAICS code 811310, with a response deadline of November 3, 2026. Bids will be evaluated based on best value, requiring a lump sum fee, itemized costs, warranty information, and proof of necessary qualifications. Submission requirements include a bid sheet, a completed supplier packet with IRS Form W-9, proof of insurance, and applicable SBA certification letters. The contract incorporates various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, equal opportunity, and labor standards, specifically adhering to Wage Determination No. 2015-4687 Revision 31 for Kentucky. Contractors must also comply with strict security protocols regarding non-public information and federal debarment disclosure requirements.
Earle C. Clements Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
**Certified SB/DVBE Only** IFPQ Boiler Inspection, Maintenance, Repair, Testing, and Reporting in Los Angeles County
Solicitation # 07A6539
The California Department of Transportation (Caltrans) is soliciting price quotes for an Invitation for Price Quote (IFPQ 07A6539) to provide comprehensive boiler inspection, maintenance, repair, testing, and reporting services at the District 7 Office facility in Los Angeles, California. The scope of work includes annual and quarterly preventative maintenance for three Unilux water tube boilers and six boiler pumps, ensuring compliance with manufacturer standards, ASME Code, OSHA requirements, and South Coast Air Quality Management District standards. This is a set-aside solicitation exclusively for certified Small Business (SB), Microbusiness (MB), or Disabled Veteran Business Enterprise (DVBE) entities. The contract will be awarded to the responsible bidder offering the lowest price quote who meets all specifications. Key operational requirements include a 48-hour response time for routine service requests and a strict prohibition on subcontracting any portion of the work. The contractor must adhere to State General Prevailing Wage Rates for Los Angeles County and provide a payment bond for any service request exceeding 25,000 dollars. Required submission documents include a Price Quote Proposal, Bidder Certification Sheet, Non-Collusion Declaration, and certifications for California Civil Rights Laws and the Darfur Contracting Act. Invoicing is conducted monthly in arrears and must be accompanied by certified payroll records and DVBE utilization reports. The agreement is subject to a budget contingency clause, meaning it is enforceable only if sufficient funds are provided by the California State Legislature or the United States Government.
California Department of Transportation

POSTED

about 16 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
Springfield Hospital Center Preventive Maintenance and Load Testing of Fifteen (15) Emergency Generators 2026
Solicitation # BPM059551
The Maryland Department of Health, Springfield Hospital Center, is soliciting bids under solicitation number BPM059551 for a one-year contract to provide preventive maintenance, emergency maintenance, minor repairs, and load testing for fifteen emergency generators at its Sykesville, Maryland campus. The period of performance is scheduled from approximately November 24, 2026, to November 23, 2027, with no renewal options. The scope of work requires four preventive maintenance visits per year, spaced three months apart, and one four-hour load bank test per generator annually. All services must be performed by fully trained and certified mechanics in accordance with Electrical Generating Systems Association standards and manufacturer recommendations. The contractor is responsible for all preventive maintenance costs and the first 500 dollars for both labor and parts per incident for emergency services or minor repairs. This is a Small Business Reserve solicitation, meaning only registered Small Business Reserve vendors are eligible for award. To qualify, bidders must possess a State of Maryland General Contractor's License, provide Electrical Generator Systems Technician Certification, and demonstrate at least five years of experience in providing similar services. The contract will be awarded to the responsible bidder who submits a responsive bid with the lowest total price. Invoicing is handled monthly via email or USPS, with payment terms of 30 days. Additionally, the contractor must adhere to strict sustainable packaging requirements, prohibiting the use of certain heavy metals and polystyrene foam.
09001-general Administration - Springfield Hospital Center

POSTED

about 18 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
Dietary Equipment Service Agreement
Solicitation # BPM059212
The Maryland Department of Health, Clifton T. Perkins Hospital Center, is soliciting bids for a dietary equipment maintenance services contract under solicitation BPM059212. This is a Small Business Reserve Procurement limited to vendors certified by the Governor’s Office of Small, Minority & Women Business Affairs. The contract is an Indefinite Quantity agreement with Fixed Unit Prices for a one-year base period, with a total award ceiling of $50,000. The scope of work includes regular inspections, preventive maintenance, and repairs for refrigeration, freezer, cooking, sanitation, ventilation, and ice machine equipment in the facility's main dietary kitchens. Contractors must address minor issues within 48 business hours and adhere to strict regulatory standards, including those from the Joint Commission on Hospital Accreditation, CMS, and NFPA 96. To be eligible, bidders must be registered with the State Department of Assessments and Taxation and hold a valid Maryland HVACR license. Because the work is performed at a secure psychiatric facility, contractors must comply with rigorous safety and security protocols, including tool inventory tracking, mandatory company ID badges, and strict patient confidentiality requirements. Bids must be submitted exclusively via eMaryland Market Place Advantage by November 4, 2026, and must include a completed bid form, a transmittal letter, and three professional references. Award will be granted to the responsible bidder offering the most favorable bid price.
Clifton T. Perkins Hospital Center

POSTED

about 18 hours ago

DEADLINE

in 5 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Holloman AFB, NM, 88330, USA

Set-Aside

NONE

Documents

1

FARO+Single_Source_Justification+redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Contacts2 people available
OfficeARNOLD AFB, TN, 37389-1332, USA
Office AddressARNOLD AFB, TN, 37389-1332, USA

Full Description

Show more
The Air Force Test Center (AFTC), Holloman AFB, New Mexico has concluded their market research and intends to solicit, negotiate, and award a sole source firm-fixed price (FFP) purchase order under FAR 13, Simplified Acquisition Procedures, to FARO Technologies Inc., 250 Technology Park, Lake Mary FL 32746-7115. The proposed North American Industry Classification System (NAICS) code for this acquisition is 811310, with a small business size standard of $8M. This purchase order will be to obtain a service plan for FARO equipment in use at the 846th Test Squadon. The anticipated award date is 19 Aug 2022. This notice is not a request for competitive proposals or quotes. A determination by the Government not to compete this proposed action based upon responses to this notice is solely within the discretion of the Government. Although the Government intends to solicit and award a sole source purchase order under the authority of FAR 13.106-1(b)(1)(i), all responsible sources may submit a capability statement, a bid, proposal, or quotation which will be considered by the Government if received no later than 12 Aug 2022 at 1:00 PM MDT. All information shall be submitted electronically to the following: Contracting Officer: Mr. Chuck King, contact@example.gov

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 333517
New
Federal
CNC Small Wire EDM
Solicitation # FA9101CNCSmallWireEDM
The Department of the Air Force is issuing a Sources Sought Notice to identify capable small and large businesses for the procurement of a new, fully functional Small CNC Wire Electrical Discharge Machining (EDM) machine for the Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, Tennessee. The required equipment must support submerged and non-submerged machining, automatic wire threading and alignment, and U-V taper cutting, with minimum axis travel of 15.5 inches for X, 11.5 inches for Y, 8.5 inches for Z, and plus or minus 2.4 inches for U and V. The machine must be compatible with a 480V, 3PH, 60 HZ electrical system and be built to NFPA 79 standards. Delivery is required within 90 days of order receipt, with the contractor providing assembly, startup, and functional testing based on ISO/ANSI standards at the AEDC Model Shop. The government requires a minimum 24-month warranty after installation and a 10-year accuracy guarantee on the linear drive system. Additionally, the contractor must provide two days of formal on-site operator training for up to five people and two days of maintenance training for up to five workers. Service support requirements include a 36-hour on-site repair response time and a 48-hour delivery window for repair parts. Interested respondents under NAICS code 333517 must submit company information, SAM UEI and CAGE codes, a compliance matrix, product literature, and past performance data to the contracting office by November 2, 2026.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333994
New
Federal
New Heat Treat Equipment
Solicitation # FA9101NHT
The Air Force Test Center’s Installation Contracting Division is conducting market research through a Sources Sought Notice to identify capable small and large businesses for the turnkey procurement, delivery, installation, and commissioning of a new Surface Combustion Allcase Batch Integral Quench Furnace Line. Located at Holloman Air Force Base in Building 1185, the project includes the installation of a Uni-DRAW Temper Furnace and a Spray/Dunk Wash Unit. The selected contractor will be responsible for all specialized engineering, rigging, and labor, ensuring the system is fully operational and compliant with NFPA 86, AMS 2750, OSHA 29 CFR 1910, and NEC/NFPA 70 standards. The performance timeline involves a 4 to 6 week kickoff and drawing phase, followed by a manufacturing lead time of approximately 52 to 78 weeks. On-site installation is expected to take 4 to 6 weeks, with an additional 2 to 3 weeks for commissioning and handover. Formal acceptance requires a successful three-cycle production demonstration and the sign-off of an Engineering Release Form. Additionally, the contractor must provide a two-year extended warranty and comprehensive on-site training for operators and maintenance personnel. Interested respondents must submit their company information, UEI number, technical solutions, budgetary estimates, and delivery timelines by November 2, 2026.
Industrial Process Furnace and Oven Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS