Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

On-Site Installation & Technical Training

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires on-site installation, calibration, and integration of a test system at the DLA facility in Philadelphia with a ZIP code of 19111, ensuring full operational readiness of the equipment in its designated environment. This includes delivering comprehensive operator training to facility personnel, equipping them to effectively and safely use the system post-installation. The work is classified as a subcontract under NAICS code 541330, which pertains to technological and scientific services. The opportunity was posted on August 4, 2026, with a firm deadline for responses set for August 18, 2026, at 4:00 PM. The contracting agency is the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense, and performance is strictly limited to the Philadelphia location with no alternative sites permitted.

General Info

On-site installation, calibration, and training for test system at DLA Philadelphia, due August 18, 2026.

Agency

Department Of Defense → DCSO-COLUMBUS-DIVISION-2View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Philadelphia, PA, 19111, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DCSO-COLUMBUS-DIVISION-2
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DCSO-COLUMBUS-DIVISION-2
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-site installation, calibration, and integration of the test system, plus delivery of operator training at the DLA facility in Philadelphia.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.
Construction Management

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project on behalf of the Elsinore Valley Municipal Water District in Riverside County, California. The project seeks firms that are certified as Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other small business categories including SBA-certified disadvantaged, women-owned, veteran-owned, and service-disabled veteran-owned small businesses. Services required may encompass engineering, environmental studies, surveying, geotechnical work, permitting, public outreach, utility location, and related professional tasks aligned with NAICS codes such as 541330, 237110, and others listed. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026. The formal response deadline for proposals is September 15, 2026, and the work location is within California.
GHD Inc.

POSTED

about 11 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Engineering Design Services
Solicitation # TPJCC Engineering Design Services 26-17
The contract seeks engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, under a Request for Quotation issued by Management & Training Corporation, the operator of the facility. The work must be performed by a licensed Professional Engineer who will deliver signed and stamped engineering drawings, structural calculations, material specifications, and a detailed bill of materials, along with electronic PDF copies and one full-size printed drawing set. The scope is classified under NAICS code 541330 with a size standard of $9 million in annual revenue, and the solicitation is set aside exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Subcontractors must self-certify their business category and obtain a Unique Entity Identifier and Taxpayer Identification Number, and must also disclose any debarment status if their subcontract exceeds $30,000. Contractors are required to comply with Service Contract Labor Standards and pay no less than the Federal Contractor Minimum Wage as outlined in Executive Order 13658 and Wage Determination SCA WD 2015-5577 Rev. 28. All work must conform to MTC specifications, be free of defects, and meet merchantable standards, with final acceptance occurring only after delivery at the designated MTC point. The contractor must indemnify MTC against all claims, liabilities, or damages arising from their performance, negligence, or breach of contract. The contract mandates strict adherence to federal data protection and privacy requirements, requiring encryption of personally identifiable information and immediate one-hour reporting of any breach to the Department of Labor. Contractors and their employees must also complete any mandatory training designated by the Contracting Officer’s Representative. Although insurance is not required for this project, invoices must include the purchase order number, service dates, itemized pricing with extended unit costs and totals, invoice number, and date, and are to be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of services. The contract may be terminated with thirty days’ written notice by either party, or immediately if government funding ceases. Submission of proposals requires completion of a bid sheet and supplier packet documents, including a W-9, self-certification form, and acceptance of terms, all to be emailed by 2:0
Tongue Point Job Corps

POSTED

about 11 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprises (DBE) for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, a municipal groundwater well replacement initiative in California. The project is divided into two phases: Phase 1 involves technical specifications, civil site design, line-bid items for drilling and abandonment of the existing well, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 focuses on detailed architectural, structural, mechanical, electrical, instrumentation and controls design, and a line-item bid schedule for equipping, testing, and commissioning the new well. The replacement well must match the existing casing depth and use a 24-inch diameter stainless steel Ful-Flo louvered screen with vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Key deliverables include a Preliminary Design Report at 30% design effort, review of up to 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. Proposal evaluation is based on six weighted factors: Relevant Qualifications and Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%), Innovation (10%), Cost (10%), and Overall Quality of Proposal (10%), with award determined by demonstrated competence rather than lowest cost. The estimated total project cost is $2,260,788, including $2 million in construction costs, with the professional services fee subject to negotiation. Proposals must be submitted via the EVMWD PlanetBids portal by 10:00 a.m. local time on September 1, 2026, following strict formatting guidelines requiring a cover letter, project approach, staff resumes, past project experience, three references, district contract history, a detailed cost proposal broken down by task, and mandatory attachments including American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration Certification. The contract includes mandatory compliance with Build America Buy America Act requirements, prohibiting procurement of non-domestic iron, steel, and manufactured products without a
Ardurra Group, Inc.

POSTED

about 11 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0
The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and engineering services during construction to replace an existing well facility. The solicitation, issued by AKM Consulting Engineers under bid number C2305, requires a firm to deliver comprehensive engineering expertise throughout all phases of the project, from initial design through construction oversight. The work involves ensuring technical accuracy, regulatory compliance, and efficient coordination of contractor activities to deliver a functional and durable water infrastructure upgrade. The contract opportunity is open to Disadvantaged Business Enterprises under the Department of Transportation’s DBE program, with a response deadline of September 1, 2026. The NAICS code 541330 classifies this as architectural and engineering services, reflecting the technical nature of the required deliverables. Primary contact for questions and submissions is Katie Neubauer of AKM Consulting Engineers, reachable via phone or email. All work will be performed in Riverside County, California, and interested parties are directed to the designated website for additional details and submission guidelines.
AKM Consulting Engineers

POSTED

about 11 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The scope spans two distinct phases: Phase 1 focuses on the design of the well itself, including civil site layout, drilling specifications, abandonment protocols compliant with Riverside County and California State Water Resources Control Board standards, bidding support, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves the engineering design of all associated site facilities—architectural, structural, mechanical, electrical, instrumentation and controls (I&C)—along with supporting technical specifications for well equipping, testing, and commissioning, while providing continued engineering support through the construction phase. The well casing must be a 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing depth, with sanitary seal placement conforming to AWWA potable water standards. Design and construction must adhere to the Build America, Buy America Act, requiring domestic content for iron, steel, manufactured products, and construction materials, with full documentation, certification, and waiver support mandatory. The project, with an estimated contract value of $1,000,000, is partially funded by a $400,000 Bureau of Reclamation grant, necessitating compliance with all federal requirements under 2 CFR Part 200, including debarment/suspension, lobbying restrictions, and audit obligations. Key deliverables include preliminary, 60%, 90%, and 100% design submittals, each subject to a four-week review period with mandatory workshops to address feedback, and a written comment response matrix for design phases. The Consultant must provide quality assurance and quality control throughout, maintain complete financial and technical records for four years after final payment, and submit monthly itemized invoices accompanied by progress reports detailing work completed, schedule impacts, and future work plans. Payment is due within 45 days of invoice approval. The project is scheduled to commence in November 2026 with completion anticipated by May 2028. Proposals must be submitted via the EVMWD PlanetBids portal by September 1, 2026, and must include comprehensive firm information, relevant project experience, certified DBE participation details, key personnel resumes with California licenses, insurance acknowledgment, conflict of interest disclosure, American Iron and Steel
GEI Consultants, Inc.

POSTED

about 11 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
SLED
MGSU, J-469-DP Cochran Campus Domestic Water System Replacement
Solicitation # PE-47200-RFQ-2026-000000147
The contract solicits design professional services for the Cochran Campus Domestic Water System Replacement at Middle Georgia State University in Cochran, Georgia, under Project No. J-469-DP. The solicitation, identified as PE-47200-RFQ-2026-000000147, was posted on August 4, 2026, with a firm deadline for responses on August 25, 2026, at 7:00 PM. The project is managed by the Board of Regents of the University System of Georgia, with Brian Harrell serving as the primary point of contact for all inquiries, reachable via email at brian.harrell1@mga.edu. All questions regarding the request for quotation or project details must be submitted in writing to this contact. The work is to be performed in Georgia, and while specific NAICS code and set-aside information are not provided, the procurement is classified under state and local government (SLED) procurement. Interested parties must refer to the attached documents for full project specifications and upload instructions as outlined in the solicitation.
Board Of(university System of Georgia) Regents

POSTED

about 17 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541330
New
SLED
Engineering Services - Groundwater Monitoring Program
Solicitation # 41-144423
Chesterfield County in Virginia is seeking qualified firms to provide engineering services for a groundwater monitoring program under solicitation number 41-144423. The opportunity was posted on August 4, 2026, with responses due by September 4, 2026, and is open to contractors serving state, local, and education entities. The work will be performed in Chesterfield, Virginia, with a specified zip code of 23832. Vin Kamatchi serves as the primary point of contact, reachable via email at kamatchiv@chesterfield.gov or by phone at 804-717-6342. The solicitation does not specify a set-aside classification or NAICS code, and bidders are expected to comply with all requirements outlined in the official procurement documentation accessible through the provided web link.
Chesterfield County

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
RFQ #27-013 Engineering Services
Solicitation # PE-64750-NONST-2027-000000214
The City of Albany, Georgia is soliciting competitive sealed proposals for engineering services to support the development and management of civil infrastructure projects, particularly in utility and transportation construction. Qualified firms or individuals with a proven track record of assisting local governments in successfully delivering such projects are invited to submit bids by 5:00 p.m. on September 9, 2026. Proposals must be delivered to the City’s Procurement Division at 222 Pine Avenue, Suite 260, Albany, GA 31701. This solicitation, identified as RFQ #27-013 with solicitation number PE-64750-NONST-2027-000000214, was posted on August 4, 2026, and is classified as a solicitation under the state, local, and education (SLED) government category. The scope requires engineers capable of providing technical expertise and project management skills tailored to the needs of municipal infrastructure. All responses must demonstrate experience, capability, and a commitment to quality outcomes in alignment with the city’s objectives. For inquiries, contact Destin Adams at dadams@albanyga.gov or 229-302-1461. Additional details and submission guidelines can be accessed through the provided online portal.
City of Albany

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
CITY OF TUPELO REQUESTFOR QUALIFICATIONS AND PROPOSAL 2026-037MT The City of Tupelo is seeking Statements of Qualifications and Proposals from interested engineering firms for the purpose of providing full engineering services for PHASE VIII of the MAJOR
Solicitation # 1555-20260728080916 Tupelo
The City of Tupelo is soliciting qualified engineering firms to provide comprehensive engineering services for Phase VIII of its Major Infrastructure Program, with proposals due by September 1, 2026. This procurement requires firms to submit both statements of qualifications and detailed technical proposals demonstrating experience, capacity, and approach to delivering full-service engineering support for a significant public works initiative. The solicitation is administered under the Mississippi Department of Finance and Administration and is open to firms with proven expertise in municipal infrastructure projects, particularly those involving long-term planning, design, and implementation of major civil works. All submissions must be received by the stated deadline and are expected to reflect alignment with the city’s objectives for sustainable, efficient, and community-focused development. The project is located in Tupelo, Mississippi, and performance of services will be primarily based within the city limits, with potential for coordination with local agencies and stakeholders throughout the engineering lifecycle.
MPTAP

POSTED

about 21 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
DIBBS
Technical Data & Certification Support for Alternative ManufacturersThe contract requires the preparation and submission of technical data packages, testing reports, and certification documentation to qualify alternative manufacturers for critical electrical connectors in accordance with DLAI 3200.1. This effort is focused on ensuring that non-primary suppliers meet stringent military and technical standards to support supply chain resilience and continuity for Department of Defense programs. The deliverables must comprehensively validate the capability, quality, and reliability of substitute manufacturers to produce connectors that are functionally equivalent to the original specification. This subcontract is issued as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses classified under NAICS code 541330, which covers engineering services. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, indicating a narrow window for submission. The work is conducted under the auspices of the Maritime Supply Chain organization within the Department of Defense, though specific performance location and point of contact details are not provided. Interested parties must respond through the official DIBBS portal to be considered for award.
MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Engineering SupportThe contract seeks engineering expertise to support sourcing, tooling, and material specifications for defense-related components, with a primary focus on responding to DLA Casting and Forging Assistance Requests. This work requires deep technical knowledge to ensure compliance with established design control requirements and to facilitate timely and accurate resolution of technical inquiries from the Department of Defense. The scope is centered on providing reliable engineering support that aligns with military standards and supply chain needs, particularly within casting and forging applications. Performance is required at Lemoore, California, with a response deadline of August 17, 2026, and the solicitation was posted on August 4, 2026. The contract is classified as a subcontract under NAICS code 541330, which covers engineering services. All technical deliverables must meet stringent quality and documentation standards, and the contractor will operate within the framework of DLA’s Fluid Handling Division to support critical defense logistics and manufacturing initiatives.
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DCSO-COLUMBUS-DIVISION-2

Same awarding agency

NAICS: 334514
New
Federal
Component & Subassembly SupplyThe contract pertains to the supply of precision components including gas sensors, data acquisition modules, safety interlocks, and burn chambers, all destined for integration into a specialized test system. These components are critical to the functionality and reliability of the system, requiring strict adherence to technical specifications and quality controls to ensure consistent performance under demanding operational conditions. The work is to be performed in Philadelphia, with a zip code of 19111, and is classified under NAICS code 334514, indicating manufacturing of instruments and related products for measuring and testing. This is a subcontract opportunity issued by the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense, with a response deadline of August 18, 2026, at 4:00 PM. The posting date was August 4, 2026, giving potential suppliers approximately two weeks to prepare and submit proposals. There is no specified set-aside classification, meaning the opportunity is open to all eligible contractors without restrictions based on size or ownership type. The nature of the components suggests a high-security, technically advanced application, and participation will require proven expertise in precision manufacturing and system integration. Failure to meet deliverables may impact mission-critical testing operations, making compliance and timeliness paramount.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 811212
New
Federal
Maintenance & Lifecycle Support PlanThe contract titled Maintenance & Lifecycle Support Plan outlines a comprehensive service agreement to ensure the continued operational integrity of a critical system through preventive maintenance, troubleshooting, and one dedicated on-site technician visit for a system health check. The provider is expected to deliver proactive care to minimize downtime, identify potential failures before they occur, and resolve issues efficiently when they arise, maintaining system reliability over its operational lifecycle. The on-site visit is a key component designed to allow direct assessment of hardware, software, and environmental conditions, ensuring that the system performs optimally under real-world conditions. This subcontract, categorized under NAICS code 811212, is issued by the Department of Defense through its DCSO-COLUMBUS-DIVISION-2 office and is performance-based in Philadelphia with a zip code of 19111. The opportunity was posted on August 4, 2026, and responses are due by August 18, 2026, at 4:00 PM. There is no set-aside designation specified, and the contract does not include details on point of contact information. All work must be executed in compliance with the Department of Defense’s requirements for system sustainment and readiness, with the goal of extending service life, reducing repair costs, and maintaining mission-critical capabilities.
Computer and Office Machine Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334516
New
Federal
Oxygen Candle Test Equipment Design & ManufacturingThe contract involves the design and manufacture of a fully integrated turnkey oxygen candle test system that must meet the stringent requirements of MIL-DTL-32789. The system is to support comprehensive burn testing of oxygen candles along with precise measurement of combustion byproducts and real-time data acquisition capabilities. The equipment must be engineered for reliability and accuracy in a controlled environment to ensure valid performance data under military specifications. All aspects of development, from conceptual design through final fabrication and integration, are included within the scope of work. The system is to be delivered and performed at a physical location in Philadelphia with a ZIP code of 19111. The solicitation was posted on August 4, 2026, with a firm response deadline of August 18, 2026. This is classified as a subcontract under NAICS code 334516, indicating it falls within the category of instrumentation manufacturing for scientific and industrial applications. The contracting entity is the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense, indicating the end-user is a U.S. military or defense-related organization requiring certified, mission-critical equipment. No set-aside status is specified, and the contract does not include a point of contact, suggesting inquiries may be handled through standard SAM.gov channels.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334516
New
Federal
PTC Oxygen Candle Tester
Solicitation # SP4706-26-Q-0030
The DLA Product Test Center in Philadelphia, Pennsylvania is seeking a single new Oxygen Candle Tester, including the full equipment ensemble, installation, training, and a comprehensive maintenance plan as outlined in the Statement of Work and Technical Specifications. Offers must include the vendor’s Cage Code, clearly state lead time, and provide a detailed line item price list that aligns with all components of the scope. The solicitation, identified as SP4706-26-Q-0030, is issued by the Department of Defense under NAICS code 334516, with the contracting office located in Columbus, Ohio. Proposals are to be submitted via email to Contracting Officer Elizabeth Dickstein no later than 12 noon EST on Tuesday, August 18, 2026. The place of performance is specifically designated as Philadelphia, Pennsylvania, with all equipment and services required to be delivered and implemented at that location.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334516
Federal
Fused Deposition Modeling (FDM) 3D Printer
Solicitation # SP4706-26-Q-0029
This solicitation seeks two new Fused Deposition Modeling (FDM) 3D printers and associated accessories for delivery to the Product Test Center Electrical Lab in Columbus, Ohio, under solicitation number SP4706-26-Q-0029. The requirement is exclusively reserved for small businesses as a Total Small Business Set Aside, with the North American Industry Classification System code 334516, and the offering must comply with the technical specifications and detailed scope of work outlined in the attached Statement of Work. All bids must include the vendor’s Cage Code, clearly state lead times, and provide a detailed line item price list corresponding to each component of the SOW. Quotes must be submitted via email to Contracting Officer Elizabeth Dickstein no later than 12:00 PM EST on Wednesday, August 12, 2026. The contract will be managed by the Department of Defense’s DCSO-COLUMBUS-DIVISION-2, headquartered in Columbus, Ohio, with performance occurring at the same location. Bidders are directed to contact Elizabeth Dickstein at elizabeth.dickstein@dla.mil or (614) 693-2954 for inquiries and must reference the solicitation number in all correspondence. The opportunity was posted on July 29, 2026, and additional information can be accessed through the official SAM.gov portal.
Analytical Laboratory Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: NA
Federal
No distinct subcontract or supplier opportunities availableThis contract is for a commercial off-the-shelf subscription service that does not allow for any divisible components or subcontracting opportunities. The prime contractor is solely responsible for delivering the entire integrated solution without the ability to delegate any part of the work to third parties. All deliverables are provided directly by the prime as a unified offering, and there are no distinct roles or avenues for suppliers or subcontractors to engage. The solicitation is managed by the Department of Defense through the DCPO-COLUMBUS-DIVISION-2, with a response deadline set for August 19, 2026, and the opportunity was posted on July 23, 2026. No NAICS code, set-aside classification, or point of contact information is provided, and the place of performance details are unspecified.

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 513120
Federal
Energy Intelligence Subscription Services
Solicitation # SP4706-26-Q-0032
The U.S. Department of Defense, through the DCSO-COLUMBUS-DIVISION-2 office in Columbus, Ohio, is soliciting quotes for subscription access to the Energy Intelligence platform for four users, covering services previously known as Oil Daily Web, Petroleum Intelligence Weekly, Jet Fuel Intelligence, and Oil Market Intelligence. This solicitation, numbered SP4706-26-Q-0032, is issued as a combined synopsis and solicitation under FAR Part 12, meaning no separate written solicitation will be issued, and quotes must be submitted by the deadline of August 19, 2026. The procurement is not set aside for small businesses and is restricted in accordance with FAR 6.103-1, with the NAICS code 513120 reflecting the industry classification and a small business size standard of 1,000 employees. The contract requires vendors to comply with all applicable provisions and clauses accessible via www.acquisition.gov. All responses must be submitted electronically through the SAM.gov platform, and the primary point of contact for questions is Tyler Merkle, reachable at 614-693-1666 or Howard.Merkle@dla.mil. The place of performance is not specified beyond the agency’s location in Columbus, Ohio, and the service is intended to support DLA Energy’s operational intelligence needs. The posting date is July 23, 2026, and interested vendors must ensure full compliance with federal acquisition requirements to qualify. No formal award will be made without a responsive, timely, and complete quote submitted through the designated online portal.
Periodical Publishers

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 541512
Federal
Cybersecurity Compliance and NIST SP 800-171 ImplementationThis contract requires the implementation and thorough documentation of NIST SP 800-171 security controls across contractor systems that process, store, or transmit covered defense information. The work involves aligning existing cybersecurity practices with the specific requirements outlined in NIST SP 800-171 to ensure compliance with federal standards for protecting sensitive defense data. A critical component of the deliverables includes conducting a System Security Plan Review and submitting a final assessment to the Supplier Performance Risk System, ensuring that all controls are accurately documented, tested, and verified for compliance. The contractor is expected to manage all aspects of the compliance process, from gap analysis and control implementation to ongoing monitoring and reporting. The performance location is Columbus, and the work falls under NAICS code 541512, indicating it is related to custom computer programming services. The contract is structured as a subcontract under the Department of Defense’s DCSO-COLUMBUS-DIVISION-2, with a response deadline of August 21, 2026, and a posting date of July 22, 2026. All deliverables must be completed in accordance with Department of Defense cybersecurity mandates, and successful performance will require close coordination with federal oversight to meet rigorous assessment and reporting standards.
Computer Systems Design Services

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 611430
Federal
Operator and Technical Training DeliveryThe contract requires the development and delivery of comprehensive technical training for operators and staff focused on the operation, safety protocols, troubleshooting, and basic maintenance of CT systems. The training must be tailored to ensure personnel are fully proficient in handling the equipment responsibly and efficiently, with emphasis on real-world applications and incident prevention. The work is classified as a subcontract under NAICS code 611430, indicating it falls within the category of professional and technical training services. Performance is expected to occur in Columbus, with the contracting entity being the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense. The opportunity was posted on July 22, 2026, and responses are due by August 21, 2026, providing a four-week window for potential subcontractors to prepare and submit proposals. No set-aside designation is specified, and while no point of contact information is provided, bidders must engage through the official SAM.gov portal using the given link to obtain further details and submit their offers in compliance with federal subcontracting guidelines.
Professional and Management Development Training

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 811212
Federal
Preventative Maintenance Services for CT Test SystemThe contract is for ongoing preventative maintenance services for a CT test system over a three-year period, consisting of a base year and two option years. The scope includes scheduled diagnostics, calibration, software updates, and comprehensive component inspections to ensure optimal system performance and reliability. All services are to be performed in Columbus, with the work falling under NAICS code 811212, indicating repair and maintenance of commercial and industrial machinery and equipment. This is a subcontract awarded by the Department of Defense through its DCSO-COLUMBUS-DIVISION-2, with a response deadline of August 21, 2026. The solicitation was posted on July 22, 2026, and while no set-aside details are provided, the placement of performance and the agency involvement suggest the contract supports defense-related operational readiness. The maintenance activities are critical to sustaining system functionality and must adhere to defined service schedules and quality standards throughout the contract term.
Computer and Office Machine Repair and Maintenance

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 334516
Federal
Computed Tomography (CT) Test System Supply and IntegrationThe contract pertains to the supply, delivery, and integration of a commercial off-the-shelf computed tomography test system at the Defense Supply Center Columbus, encompassing all necessary hardware, software, cabling, and system-level testing to ensure full operational capability. The effort is focused on delivering a complete, ready-to-deploy CT test system that meets military standards for performance, reliability, and interoperability within the defense supply chain environment. All components must be procured as commercial products without customization, though integration and validation testing will be conducted on-site to confirm alignment with mission requirements. Performance of the work is designated to occur at Columbus, with a response deadline of August 21, 2026, and the solicitation is classified as a subcontract under NAICS code 334516, which covers the manufacturing of measuring and controlling instruments. The contracting activity falls under the Department of Defense, specifically the DCSO-COLUMBUS-DIVISION-2, and no set-aside designation is specified, indicating open competition among qualified vendors. The system must be delivered fully configured and tested, with all documentation and support materials included to enable seamless handover and long-term sustainment by defense personnel.
Analytical Laboratory Instrument Manufacturing

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 334516
Federal
Computed Tomography Test System
Solicitation # SP4706-26-R-0004
The U.S. Department of Defense, through the Defense Supply Center Columbus in Columbus, Ohio, is soliciting proposals under solicitation number SP4706-26-R-0004 for the full scope of components required to deliver a Computed Tomography (CT) Test System. This procurement is issued as a combined synopsis and solicitation under FAR Part 12, and no separate written solicitation will be provided. The requirement is set entirely aside for small business concerns with a NAICS code of 334516 and a size standard of 1,000 employees. Proposals must include a signed copy of the solicitation, completed Section B with pricing and delivery dates, adherence to all referenced clauses and provisions listed in Attachment 2, and detailed technical specifications of the proposed system. All submissions must be delivered electronically via email to Tyler Merkle at Howard.Merkle@dla.mil by 5:00 p.m. Eastern Standard Time on August 21, 2026; facsimile submissions are not accepted. Questions must be submitted by the same contact no later than 5:00 p.m. on July 29, 2026. The place of performance is Columbus, Ohio, and the procurement is unrestricted in terms of eligibility beyond the small business set-aside requirement.
Analytical Laboratory Instrument Manufacturing

POSTED

14 days ago

DEADLINE

in 16 days
View Details