Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation, Calibration, and Training Services for FTIR System

Active

Federal

Response Deadline08/01/2026, 01:30:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the on-site installation, alignment, calibration, and operator training for the INVENIO-X FTIR spectrometer at NASA Goddard, ensuring the system is fully functional and properly configured for scientific use. All technical activities must be completed at the NASA facility, with particular emphasis on validating performance under simulated environmental conditions to meet mission-specific requirements. The contractor is responsible for delivering comprehensive training to NASA personnel to ensure safe, accurate, and independent operation of the instrument. This subcontract, issued under NAICS code 541715, was posted on July 29, 2026, with a response deadline of August 1, 2026, at 1:30 a.m. UTC. The work is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and performance is expected to occur at the NASA Goddard location. No set-aside provisions or specific organizational type restrictions are indicated, and no point of contact information is provided in the published data.

General Info

Install, align, calibrate INVENIO-X FTIR at NASA Goddard, train operators, meet mission requirements.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

MS

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 1

Submission deadline

Response Deadline

08/01/2026, 01:30:00 AM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform on-site installation, alignment, calibration, and operator training for the INVENIO-X FTIR spectrometer at NASA Goddard, including validation under simulated environmental conditions.

Similar Contracts

Same NAICS industry code

On-Site Installation and CommissioningThe contract requires professional installation, calibration, and commissioning of an FTIR microscope at the Bureau of Engraving and Printing facility in Washington, DC, with a performance location designated by zip code 20228. This subcontract is classified as a Small Business Set Aside under the SBA, meaning only qualified small businesses are eligible to respond, and it is governed by the NAICS code 541715, which pertains to scientific research and development services. The solicitation was posted on July 29, 2026, with a firm deadline for responses on July 31, 2026, at 6:00 PM. The contracting entity is the Office of the Chief Procurement Officer within the Department of the Treasury, and the work must be performed on-site at the federal facility in Washington, DC, to ensure proper integration and operational readiness of the FTIR microscope system.

Office Of The Chief Procurement Officer

POSTED

about 9 hours ago

DEADLINE

ENTERPRISE PROTOTYPE INITIATIVE CONSORTIUM (EPIC)The Air Force Research Laboratory is soliciting whitepapers for the Enterprise Prototype Initiative Consortium (EPIC), an Other Transaction Agreement (OTA) for a Prototype Indefinite Delivery Vehicle (IDV) authorized under 10 U.S.C. §4022. The purpose is to identify qualified offerors capable of rapidly prototyping and testing technologies across technology areas relevant to the Air Force, accelerating the development and integration of defense systems while reducing costs. This is not a contract solicitation at this stage; only whitepapers are being accepted, and successful submitters will be invited later to submit full proposals. The resulting OTA will serve as an overarching IDV with no ceiling on total value, allowing for multiple Firm-Fixed Price Project Level Orders (PLOs) to be issued over a 120-month ordering period, with performance extending up to 24 months beyond that. Each PLO may result in deliverables such as software, hardware, or technical data, and follow-on production contracts or OTs may be considered on a project-by-project basis, contingent on successful performance. Whitepapers must not exceed ten pages and must be submitted electronically by 12:00 pm Eastern Daylight Time on August 12, 2026, to specified government email addresses. Proposals are evaluated based on alignment with the Statement of Work and other criteria outlined in the solicitation attachments. The agreement is closed to foreign participation at both the lead and project performer levels, and all participants must be U.S.-based entities. Companies with Foreign Ownership, Control, or Influence (FOCI) that have been mitigated may request eligibility verification. Offerors must maintain an accounting system capable of tracking government funds despite the fixed-price nature of awards. Engineering Change Proposals are permitted during PLO performance, and all submissions are voluntary with no guarantee of payment or award. The acquisition is performance-based, and participation requires compliance with the Other Transactions Guide, applicable law, and policy, with awards potentially supporting classified work up to TS/SCI level under appropriate security agreements.

FA8750 Afrl Rik

POSTED

about 9 hours ago

DEADLINE

Quantum Benchmarking Initiative (QBI) 2026 AnnouncementThe Defense Advanced Research Projects Agency (DARPA) is soliciting innovative research through the Quantum Benchmarking Initiative (QBI) 2026 to advance the development of utility-scale fault-tolerant quantum computers and associated computational workflows, with a focus on revolutionary breakthroughs rather than incremental improvements. This initiative, issued under solicitation DARPA-PA-26-02, operates through a series of targeted Quantum Benchmarking Initiative Topics (QBITs), each defining specific research challenges, submission guidelines, and deadlines; proposals must respond exclusively to a published QBIT to be considered. The program is structured around three evaluation stages—assessing a plausible path to a United States Quantum Competitiveness (USQC) goal by 2033, evaluating the technical rigor and risk mitigation of the R&D plan, and verifying the concept’s validation through measurement and demonstration. Awards will be made under Other Transaction (OT) agreements, prioritizing technical merit and innovation through a trade-off analysis rather than lowest-price technically acceptable selection, and funding is expected to be distributed across multiple recipients from both traditional and non-traditional research communities. All participants must comply with stringent Controlled Unclassified Information (CUI) handling protocols as mandated by DoDI 5200.48 and NIST SP 800-171, with documents requiring explicit CUI, Proprietary Business Information, and Export-Controlled markings on all materials and cover sheets, and secure transmission only through approved channels such as encrypted email or DoD SAFE. Contractors and performers must register in the System for Award Management (SAM) with a valid Unique Entity ID, maintain compliance with DFARS 252.204-7000 and 252.204-7012 for safeguarding defense information, and immediately report any unauthorized disclosures or cybersecurity incidents to the QBI Program Security Officer. Performance will be administered under the auspices of DARPA’s Microsystems Technology Office in Arlington, Virginia, with invoicing conducted via the Wide Area WorkFlow system, and all technical data, budget, and source selection information designated as CUI with limited dissemination. Foreign persons may access CUI only under specific, pre-approved conditions tied to authorized DoD missions, and proprietary information must be marked and handled according to individual Other Transaction Agreements. The initiative sets a broad solicitation window through November 14, 2026, but individual QBIT deadlines and performance periods vary and are explicitly defined within

Defense Advanced Research Projects Agcy

POSTED

about 9 hours ago

DEADLINE

Quantum Benchmarking Initiative Topic (QBIT) Stage AThe Defense Advanced Research Projects Agency (DARPA) is soliciting innovative proposals under the Quantum Benchmarking Initiative Topic (QBIT) Stage A, identified by solicitation number DARPA-PA-26-02-02, to advance the design, engineering, testing, and evaluation of utility-scale fault-tolerant quantum computers and associated computational workflows. This initiative aims to foster revolutionary breakthroughs rather than incremental improvements to the current state of quantum computing, with a strong emphasis on attracting new entrants to the field and expanding the breadth of potential solutions. Proposals must be submitted as abstracts through the DARPA BAA portal by November 30, 2026, following strict formatting guidelines outlined in the mandatory QBIT Stage A Abstract Template, which requires detailed sections on the proposed approach, technology challenges, technical capability, and a roadmap for development. The program follows a multi-stage structure, with Stage A focused on developing a system concept report over a six-month period, leading to potential progression to later stages with increased funding and scope. All submissions must be unclassified and adhere to strict data handling protocols defined by the QBI Controlled Unclassified Information (CUI) Guide, which mandates compliance with NIST SP 800-171, DFARS clauses, and export control regulations, including prohibitions on the use of covered telecommunications equipment from designated foreign entities. Proposals will be evaluated under an Other Transaction Authority (OTA) framework, not traditional FAR-based contracting, and are subject to non-traditional terms tailored for research collaboration. The award mechanism will be structured as an Other Transaction Agreement with milestone-based payments tied to deliverables outlined in the attached Task Description Document, Schedule of Milestones and Payments, and Report Requirements. Performance is governed by agreements that include clauses addressing Organizational Conflict of Interest, requiring full disclosure of any prior or ongoing support to DARPA offices and a detailed mitigation plan if applicable. Contractors must also demonstrate the ability to securely handle CUI on compliant systems, report cyber incidents immediately, and restrict access to foreign persons in accordance with public law and export control restrictions. All participants are required to register in SAM, provide a Unique Entity ID and CAGE code, and submit certifications regarding federal tax compliance and felony convictions. Invoicing must occur through the Wide Area Workflow system, and performance may be conducted at any location specified in the executed agreement, though no physical packaging or delivery requirements are imposed. DARPA retains discretion over award decisions through a trade-off process focused on technical merit, mission

Defense Advanced Research Projects Agcy

POSTED

about 9 hours ago

DEADLINE

Chemistry Research for the Division of Translational Toxicology (DTT)The National Institute of Environmental Health Sciences (NIEHS), through its Division of Translational Toxicology (DTT), is seeking chemistry research support to advance the National Toxicology Program’s mission of understanding how environmental factors impact human health. This acquisition, identified by solicitation number 75N94026R00002, is a market research effort aimed at identifying qualified vendors capable of providing comprehensive chemistry services across eight functional areas: Logistics and Handling, Characterization, Formulation, Biosample Analysis, Special Studies, Animal Studies, Omics, and In Vitro Assays. The contractor will be responsible for end-to-end chemistry support, including handling hazardous materials, developing and validating analytical methods, conducting toxicokinetic and ADME studies, and ensuring compliance with FDA Good Laboratory Practices, DOT regulations for chemical transport, and NCI guidelines. Work is to be performed at the contractor’s facilities, coordinated closely with DTT in Bethesda, Maryland, where all data and reports must be submitted electronically through the DTT Program Management System in accordance with Section 508 accessibility standards. The anticipated contract structure includes a ten-year base period with an optional six-month extension, and the government expects to use a Cost Plus Fixed-Fee contract type. Evaluation of future proposals will prioritize technical performance, with Logistics and Handling carrying the highest weight at 30%, followed by key areas such as Biosample Method Development and Chemical Identity and Purity at a weight of five. Proposals must include detailed Quality Management Plans, Health and Safety Plans, and IT Security Plans, all of which must be approved prior to work commencement. Key personnel, including the Principal Investigator and Quality Assurance Officer, must be direct employees of the prime contractor, and subcontractors may not fulfill these roles. Facilities involved in animal work must hold AAALAC accreditation and maintain an active IACUC, while the prime contractor must hold DEA licensing for controlled substances. The solicitation requires respondents to submit a single 15-page Capability Statement via email by March 4, 2026, with the document limited to Word or PDF formats. While this posting is for market research and not a formal solicitation, it sets the stage for a future contract with no set-aside classification under NAICS code 541715, and the government will consider all business sizes in the selection process. Financial and administrative details, including payment methods and accounting codes, will be finalized in the subsequent Request for Proposal.

National Institutes Of Health Nichd

POSTED

about 9 hours ago

DEADLINE

in about 1 month

On-Site Installation and Technical Training ServicesThe contract entails the on-site delivery, installation, calibration, and commissioning of a wavefront sensor at the Naval Research Laboratory in Washington, D.C., with a zip code of 20375. The work includes complete technical integration of the system at the facility and requires that all components be fully functional and calibrated to meet operational standards prior to handover. Accompanying this physical deployment is mandatory hands-on training for facility personnel on the operation of the hardware, utilization of associated software, and routine maintenance procedures to ensure long-term system reliability and autonomous use. This subcontract is classified under NAICS code 541715, indicating it relates to research and development in the physical, engineering, and life sciences. The opportunity was posted on July 28, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense through the Naval Research Laboratory. The place of performance is specifically designated as Washington, and all services must be performed on-site; remote support or off-site delivery is not acceptable. The contract emphasizes direct, in-person technical engagement to ensure personnel are thoroughly proficient in system handling, troubleshooting, and upkeep, making operational readiness a central objective.

Naval Research Laboratory

POSTED

DEADLINE

PID-Based Laser Frequency Stabilization System DevelopmentThe contract entails the design and implementation of a PID feedback control system to externally stabilize laser frequency with real-time calibration and long-term drift correction capabilities. The system must precisely regulate laser output frequency by leveraging proportional-integral-derivative control algorithms tuned for high stability and minimal error accumulation over extended operational periods. Real-time calibration mechanisms are required to continuously adjust for environmental and component-induced variations, while long-term drift correction features must autonomously compensate for thermal, mechanical, and electronic aging effects without manual intervention. The work is to be performed in Boulder, Colorado, under a subcontract arrangement with the National Institute of Standards and Technology, part of the U.S. Department of Commerce. The project falls under NAICS code 541715, indicating it involves scientific research and development services focused on physical, engineering, and related sciences. Proposals must be submitted by August 7, 2026, following a posting date of July 28, 2026. Success will depend on delivering a robust, field-deployable system capable of maintaining laser frequency stability under varying conditions, meeting stringent NIST performance benchmarks for precision metrology and calibration applications.

Department Of Commerce Nist

POSTED

DEADLINE

Centrifuge Installation & Start-Up ServicesThe contract entails on-site installation, calibration, operational validation, and comprehensive user training for the BIOS 16 centrifuge system at the designated location in Adelphi, Maryland, with a zip code of 20783. All services must be performed physically at the site to ensure proper integration, functionality, and safe operation of the equipment by end users. The work is classified under NAICS code 541715, indicating it falls within scientific research and development services, and is issued as a subcontract under the Department of Defense, specifically through the W6QK Acc-Apg Adelphi office. Prospective providers must submit their proposals by the deadline of August 12, 2026, at 7:00 PM, with the solicitation posted on July 28, 2026, allowing approximately two weeks for response preparation. No set-aside provisions are specified, meaning the opportunity is open to any eligible subcontractor regardless of business size or demographic classification.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

Technical Integration and Testing SupportThe contract requires technical integration and testing support for the incorporation of laser modules into the SCALPSS 2.0 stereo camera system, a critical component for space-based optical sensing. The work encompasses precise optical alignment, thermal vacuum testing to simulate space environmental conditions, and full flight qualification to ensure system reliability under extreme operational stresses. All activities must meet stringent NASA standards for spacecraft hardware, with performance validated through rigorous procedural checkpoints and documentation. The place of performance is designated as Hampton, Virginia, where the facilities and expertise necessary for high-fidelity environmental and optical testing are located. This subcontract is issued under the NAICS code 541715 for research and development in physical, engineering, and life sciences, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 28, 2026, indicating a highly time-sensitive procurement window. The successful contractor will be expected to deliver fully integrated and qualified laser modules ready for flight, with all testing results and compliance records maintained to NASA’s archival and audit requirements. No set-aside designation is specified, and the opportunity is open to qualified entities capable of meeting the technical, temporal, and quality demands of this mission-critical support effort.

NASA Shared Services Center

POSTED

DEADLINE

in about 15 hours

Deep Learning Integration for Design SuggestionThe contract seeks the development of a deep learning model to generate novel nozzle geometries by leveraging historical simulation data and real-time performance feedback, aiming to optimize fluid dynamics and propulsion efficiency. The project is a subcontract under the NASA Shared Services Center, tied to the National Aeronautics and Space Administration, with performance centered at Stennis Space Center, Mississippi, 39529. The initiative falls under NAICS code 541715, indicating it is focused on research and development in physical, engineering, and life sciences. The opportunity was posted on July 28, 2026, with a response deadline of July 30, 2026, underscoring a rapid procurement timeline. The model must effectively learn from prior computational fluid dynamics simulations and adaptively refine design suggestions based on live operational data, ensuring that proposed geometries are both innovative and viable for aerospace applications.

NASA Shared Services Center

POSTED

DEADLINE

in about 15 hours

Embedded Optimization Algorithm DevelopmentThe contract involves the development and integration of advanced optimization algorithms such as genetic and gradient-based methods to enhance the design of aerospike nozzles through iterative simulation feedback. The goal is to leverage computational modeling to refine nozzle geometry and performance metrics, ensuring improved efficiency, thrust, and thermal resilience under extreme conditions typical of rocket propulsion systems. This work requires close alignment with aerospace engineering principles and high-fidelity simulation tools to generate actionable design improvements. The contract is a subcontract under NASA’s Shared Services Center, specifically designated for work at Stennis Space Center, Mississippi, with a strict response deadline of July 30, 2026, and a posting date of July 28, 2026. It falls under NAICS code 541715, which categorizes research and development in the physical, engineering, and life sciences. The project demands technical expertise in algorithmic optimization, computational fluid dynamics, and aerospace system design, with an emphasis on delivering robust, validated solutions that directly inform next-generation propulsion architectures for NASA’s mission objectives.

NASA Shared Services Center

POSTED

DEADLINE

in about 15 hours

Automated Grid Deformation Module DevelopmentThe contract calls for the development of automated software routines capable of deforming computational fluid dynamics grids in real time to match dynamic changes in aerospike nozzle geometry, ensuring accurate simulation fidelity as design parameters shift. This module must be fully integrated with the Loci/CHEM framework, a high-performance simulation platform used for advanced propulsion modeling, requiring seamless data exchange, compatibility with existing solver architectures, and robust handling of complex mesh topologies under extreme deformation conditions. The work targets a specific performance location at Stennis Space Center with a zip code of 39529, where the software will be validated against experimental and simulation benchmarks. The project is structured as a subcontract under NASA’s Shared Services Center, falling under the NAICS code 541715 for scientific research and development services. The solicitation was posted on July 28, 2026, with a strict response deadline of July 30, 2026, indicating a rapid procurement timeline typical of time-sensitive aerospace innovation efforts. While no set-aside provisions or point of contact details are provided, the contract’s focus on grid deformation in propulsion systems underscores its critical role in enabling efficient, high-fidelity analysis of next-generation rocket engines, particularly those utilizing aerospike nozzle configurations to enhance performance across altitude ranges.

NASA Shared Services Center

POSTED

DEADLINE

in about 15 hours

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Aerospace-Grade Equipment and Tooling Supply for Fiber ProcessingThe contract calls for the supply of specialized equipment, tooling, and instrumentation designed for the handling, storage, and processing of fibers in aerospace-grade cleanroom and laboratory environments, with all items required to meet stringent purity and contamination control standards appropriate for NASA mission-critical applications. The equipment must be compatible with sensitive aerospace manufacturing processes and capable of performing reliably under the exacting conditions of controlled environments where particulate and chemical contamination cannot be tolerated. All deliverables must be fully documented with compliance certifications, materialTraceability records, and validation testing data to ensure alignment with NASA’s quality and operational requirements. This is a subcontract opportunity issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with a North American Industry Classification System code of 423830, indicating a focus on wholesale trade of industrial equipment. The solicitation was posted on July 29, 2026, and responses are due by August 1, 2026, at 1:30 a.m. Eastern Time. While the specific place of performance and point of contact details are not provided, the nature of the work implies that equipment will be delivered to and utilized in NASA-affiliated facilities where fiber processing occurs in support of advanced aerospace systems. Potential vendors must demonstrate proven experience supplying similar high-precision tools for aerospace or highly regulated industries, with an emphasis on cleanroom compatibility, documentation rigor, and adherence to strict delivery timelines.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Cross-Lapper Equipment Operation and Variation TrialsThe contract requires the operation and modification of cross-lapper equipment to conduct trials that assess fiber laydown variations and enhance the uniformity and performance of TPS material on a commercial production line. The work centers on optimizing material characteristics through practical adjustments to equipment settings and processes, with a focus on achieving consistent, high-quality output suitable for aerospace applications. Success demands technical expertise in textile machinery operation, analytical evaluation of fiber distribution, and iterative process refinement to meet stringent performance criteria. This subcontract, listed under NAICS code 326299, is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It was posted on July 29, 2026, with a strict response deadline of August 1, 2026, at 1:30 AM. There is no designated set-aside classification, and while the specific location of performance is not provided, the work is expected to take place on a commercial production line aligned with NASA’s advanced material development objectives. The opportunity is open for competitive submission among qualified subcontractors with relevant experience in fiber processing and industrial equipment optimization.

All Other Rubber Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Procurement of Carbon and Kynol Fibers for Aerospace ApplicationsThe contract seeks the supply of 5 denier carbon and Kynol phenolic precursor fibers exclusively for development of thermal protection systems in aerospace applications, requiring strict adherence to aerospace-grade performance and material specifications. All fibers must meet rigorous quality standards, including consistent physical and chemical properties necessary for high-temperature environments, and full traceability of raw materials through every stage of production and delivery is mandatory to ensure compliance with NASA’s aerospace protocols. The subcontract is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is procured through the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration to support critical TPS research and development initiatives. Responses are due by August 1, 2026, at 1:30 AM, with no set-aside provisions specified, indicating open competition among qualified suppliers capable of fulfilling the technical and documentation demands of the requirement.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 9 hours ago

DEADLINE

Future MultiTect Detector Upgrade Pathway (Potential Option Work)The contract outlines engineering support and hardware provisions to enable the future integration of up to five automated MultiTect detectors onto the INVENIO-X platform, specifically designed to expand infrared detection capabilities in a modular fashion. This effort is focused on preparing the system architecture and physical infrastructure to accommodate the detectors without requiring extensive redesign, ensuring that integration can occur efficiently when the need arises. The work is classified as a subcontract and falls under NAICS code 334516, indicating it pertains to the manufacturing of instruments and related products for measuring and testing. Issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, the opportunity was posted on July 29, 2026, with a response deadline of August 1, 2026. No specific place of performance or point of contact is detailed, and no set-aside designation is assigned, suggesting it is open to eligible contractors without restrictions. The nature of the work indicates a forward-looking capability enhancement rather than immediate deliverables, positioning the contract as a strategic pathway to scale infrared sensor deployment as mission requirements evolve.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Key FTIR Components (Beamsplitter, Detector, Software)NASA Shared Services Center is seeking a subcontractor to supply critical components for integration into a Fourier Transform Infrared (FTIR) system, including a MIR-KBr beamsplitter, DLA-TGS detector, high-power infrared source, aperture wheels, and OPUS/IR software paired with the BPAD ATR Polymer Library. These subsystems are essential for enabling high-precision spectral analysis and must meet stringent performance standards for use in scientific and aerospace applications. The contract is open for bids with a response deadline of August 1, 2026, and falls under NAICS code 334516, indicating classification within the manufacturing of analytical laboratory instruments. The components are to be delivered for integration into NASA’s existing FTIR infrastructure, requiring full compatibility, calibration readiness, and documentation to support mission-critical operations. All deliverables must be fully tested and certified to ensure operational reliability in demanding environmental conditions.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of INVENIO-X FTIR Spectrometer with MultiTect CapabilityNASA is seeking a subcontractor to supply, deliver, and integrate a commercial off-the-shelf INVENIO-X FTIR spectrometer system equipped with MultiTect detector compatibility for use in planetary atmosphere simulation research under extreme thermal conditions. The system must be capable of precise spectral analysis in high-stress thermal environments to support scientific investigations of atmospheric composition and behavior relevant to space missions. The contract is classified under NAICS code 334516 and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Responses are due by August 1, 2026, and the award will facilitate critical research operations requiring reliable, high-performance spectroscopic instrumentation capable of operating reliably under simulated planetary conditions.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

Guralp seismic sensor equipmentVendors must submit a bid for Guralp seismic sensor equipment referencing solicitation number 80NSSC26937181Q with the CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email included in their response. All inquiries must be submitted no later than day three of the posting, and quotes must be sent via email with the RFQ notice ID clearly stated in the subject line. Payment will not be made via credit card. The opportunity is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, 39529. The response deadline is August 5, 2026, at 1:00 PM EST, and no set-aside provisions apply to this combined solicitation under NAICS code 334519. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Shari Trigg as the secondary contact at shari.trigg@nasa.gov.

Other Measuring and Controlling Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Off-site Training PurchaseThe contract titled Off-site Training Purchase, under solicitation number 80NSSC26939644Q, is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It is posted for response by August 3, 2026, at 6:00 PM Eastern Time, with a NAICS code of 541611 indicating it pertains to management consulting services. The contract requires vendors to submit a capability statement exclusively; quotes or pricing proposals will not be accepted. Performance is expected to occur at Stennis Space Center, Mississippi, with the primary point of contact being Cara Craft, reachable via email at cara.s.craft@nasa.gov. Interested parties must review the attached documents for detailed requirements and ensure their submissions demonstrate relevant expertise and capacity to deliver the off-site training services, with no other forms of proposals permitted under this opportunity.

Administrative Management and General Management Consulting Services

POSTED

about 9 hours ago

DEADLINE

INVENIO-X Fourier Transform Infrared Spectrometer with MultiTect unitNASA/NSSC is procuring the INVENIO-X Fourier Transform Infrared Spectrometer with MultiTect unit from BRUKER SCIENTIFIC LLC under a sole source contract authorized by FAR 12.102(a), as this vendor is the sole provider of the specified equipment. The contract will be managed by NASA/NSSC with performance taking place at NASA’s Goddard Space Flight Center, and the acquisition will follow commercial item procedures outlined in FAR Part 12. The NAICS code for this procurement is 334516. Interested parties may submit written capability statements to the designated point of contact no later than 8:30 p.m. Central Standard Time on July 31, 2026, to allow the government to evaluate whether full and open competition is warranted; however, the decision to proceed without competition rests solely with the government. Oral communications are not permitted in response to this notice. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and inquiries may be directed to Cody Guidry, Procurement Specialist II, at Cody.d.guidry@nasa.gov, with Shari Trigg as the secondary point of contact. The solicitation number is 80NSSC26938746Q, and vendors must reference the Notice ID when submitting any capability information.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

Electrical MaterialsThe solicitation for Electrical Materials is issued under RFQ Notice ID 80NSSC26938743Q by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with a small business set aside totaling the contract. Vendors must submit their bids by August 5, 2026, at 3:00 PM Eastern Time and are required to reference the RFQ notice number in the subject line of their submission. All responses must include the vendor’s CAGE/UEI code, FOB destination terms, lead time for delivery, and the name and email of the point of contact. The place of performance is at Stennis Space Center, Mississippi, and payment will not be made via credit card. The North American Industry Classification System code for this procurement is 335999, and inquiries must be submitted no later than three days after the posting date of July 29, 2026. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Will Garrett as the secondary contact at will.c.garrett@nasa.gov.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

66A Rotary feedthrough for VOiD deposition systemNASA/NSSC is seeking to award a sole source contract to KURT J LESKER CO for the 66A Rotary feedthrough required for a VOiD deposition system, as it has been determined that this vendor is the sole provider of this specific component. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance taking place at NASA’s Glenn Research Center. The NAICS code for this effort is 333912, and the solicitation number is 80NSSC26938965Q. Although this is not a request for quotes and price submissions will not be reviewed, interested organizations may submit written capability and qualification statements by 9:00 a.m. Central Standard Time on August 3, 2026, solely to assist the government in determining whether to pursue competitive bidding. All correspondence must reference the contract ID to ensure proper tracking. Oral communications are prohibited, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies. The primary point of contact is Monica Wilson, Procurement Assistant, with Karen Artis as the secondary contact. The contract will not utilize any set-aside programs.

Air and Gas Compressor Manufacturing

POSTED

about 9 hours ago

DEADLINE