Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation, Testing, and Training

Active

Federal

Response Deadline07/20/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails on-site installation, system testing, and technical training for military personnel focused on the operation, troubleshooting, and maintenance of a range target system. All work must be performed at Fort Moore, Georgia, with the contractor responsible for delivering comprehensive hands-on training to ensure military personnel are fully proficient in system use and upkeep. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small businesses as defined by the Small Business Administration. The North American Industry Classification System code is 238990, indicating the work falls under other construction related services. The contract is issued by the Department of Defense under the FA4830 23 Cons Cc office and is classified as a subcontract. Responses must be submitted by July 20, 2026, at 6:00 PM Eastern Time, with the opportunity posted on June 22, 2026.

General Info

On-site installation, testing, and training for range target system at Fort Moore by small business subcontractor.

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 22

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4830 23 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4830 23 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation, system testing, and technical training for military personnel on operation, troubleshooting, and maintenance of the range target system.

Similar Contracts

Same NAICS industry code

Emergency Fence RepairThe contract is for emergency fence repair services at the California Office of Emergency Services headquarters, open exclusively to small businesses. The solicitation, numbered 0000039820, was posted on July 17, 2026, with a response deadline of July 29, 2026, at 6:00 PM. Work must be performed at the Cal OES HQ location in California, and no specific NAICS code or set-aside type has been designated. The primary point of contact for inquiries is Carrie Koch, who can be reached via email at carrie.koch@caloes.ca.gov. All proposals must be submitted through the CalEProcure portal using the provided UI link before the deadline to be considered.

Office of Emergency Services

POSTED

about 11 hours ago

DEADLINE

Shade Awning Installation ServicesThe contract pertains to the on-site installation of two shade sails at a location in San Diego, with scope covering all necessary site preparation, attachment of hardware to existing posts, proper tensioning of the sails, and a final safety inspection to ensure compliance with ADA standards. The work must be executed using pre-existing structural posts, eliminating the need for new foundational installations, and all components must be installed to meet applicable safety and accessibility requirements. The contractor is responsible for ensuring the final installation is secure, functional, and fully compliant with regulations governing public accessibility. This is a subcontract opportunity posted by San Diego County under NAICS code 238990, with a response deadline of July 25, 2026, and the solicitation was made available on July 17, 2026. The place of performance is specifically in San Diego, though no additional address details are provided, and the contract will be managed through the county’s procurement portal. No set-aside designation or organization type is specified, and there is no point of contact listed, suggesting bidders must refer to the official UI link for submission guidelines and further procedural information.

San Diego County

POSTED

about 16 hours ago

DEADLINE

Signage and Traffic Control SystemsThe contract involves the fabrication and installation of regulatory, warning, and guide signs along with all associated mounting and foundation work necessary for proper deployment. This subcontract is part of a broader initiative managed by the Florida Administrative Services, Procurement Division, and is classified under NAICS code 238990, which encompasses other construction support activities. The solicitation was posted on July 17, 2026, and all responses must be submitted by August 18, 2026, with the work expected to take place within Florida, although the exact location is not specified. The project requires full compliance with industry standards for traffic control systems, ensuring signs are durable, visible, and correctly positioned to meet safety and operational requirements. Interested parties should review the complete terms through the provided online portal before the deadline.

Administrative Svcs., Procurement Division

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Civil and Site Preparation WorkThe contract entails comprehensive civil and site preparation work centered on the area surrounding the influent screen installation, requiring full excavation, concrete demolition, regrading, and restoration to ensure proper functionality and environmental compliance. All activities must include temporary shoring systems to maintain structural stability during operations, dewatering efforts to manage groundwater, and robust erosion control measures to prevent sediment runoff and protect surrounding areas. The work is classified under NAICS code 238990 and is structured as a subcontract opportunity issued by the Town of Hopkinton in Massachusetts, with performance required at Main Street, Hopkinton, ZIP 01748. Bidders must submit responses by the deadline of July 31, 2026, following the posting of the solicitation on July 17, 2026.

HOPKINTOWN - Town of Hopkinton

POSTED

about 17 hours ago

DEADLINE

Rubberized Fall Surface InstallationThe City of Bainbridge in Georgia is seeking a subcontractor to install poured-in-place rubber safety surfacing in playground fall zones, ensuring full compliance with ASTM F1292 standards for impact attenuation. This project is critical for enhancing child safety by providing a durable, shock-absorbing surface that mitigates injury risk from falls during play activities. The installation must meet exacting technical specifications to guarantee consistent performance under varying environmental conditions and long-term durability under heavy use. Subcontractors must respond by August 17, 2026, and the opportunity is classified under NAICS code 238990 for other specialized construction activities. The contract is posted on the Georgia Department of Administrative Services procurement portal with no set-asides or specific small business designations indicated. All work must be performed at the designated playground locations under the oversight of the City of Bainbridge, though the exact sites and point of contact details are not specified in the posting. Interested parties should access the official solicitation through the provided link for detailed requirements and submission instructions.

City of Bainbridge

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Unit Paver InstallationThe contract titled Unit Paver Installation solicits bids for the supply and installation of interlocking concrete or stone pavers to be used for walkways and decorative surfacing located near the slide entrance. The work is part of a subcontract under NAICS code 238990, indicating it falls under other construction-related specialties, and is being procured by the City of Bainbridge in Georgia. The solicitation was posted on July 17, 2026, with a firm deadline for responses set for August 17, 2026, at 4:00 PM. The project requires precise material handling and installation to ensure durability and aesthetic quality, with all materials conforming to specified standards for outdoor use. Performance of the work is expected to take place at the identified site, though no specific address or geographic coordinates are provided in the contract data. Bidders must be prepared to meet all technical, temporal, and quality requirements outlined in the full solicitation, which can be accessed via the provided UI link.

City of Bainbridge

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Skirting Panels with Velcro EdgingTarrant County is seeking a subcontractor to supply skirting panels in two specified heights, 24 inches and 8 inches, each cut into 8-foot sections and featuring Velcro edging for easy installation and modularity. The contract requires delivery of enough panels to cover the full perimeter plus an additional 10 panels to accommodate unforeseen needs or adjustments. The solicitation is open for responses until August 6, 2026, with bids due by 8:00 PM Central Time. The work falls under NAICS code 238990, which categorizes it as other specialized construction activities, indicating the panels are part of a broader construction or renovation effort. The contract is posted on Tarrant County’s procurement portal, and while no point of contact or specific location details are provided, performance is expected within Texas. Interested parties should review the full solicitation on the county’s official procurement website to ensure compliance with all technical and administrative requirements.

POSTED

about 18 hours ago

DEADLINE

Guardrail and Safety Barrier InstallationThe contract involves the supply and installation of guardrails, end terminals, and crash cushions along roadway edges and medians to enhance transportation safety. It is issued as a subcontract under NAICS code 238990 by the Virginia agency Public Services, with a response deadline of September 3, 2026, and was posted on July 17, 2026. The work is to be performed at unspecified locations within Virginia, with no set-aside designation or detailed point of contact provided. All materials and installations must meet applicable safety and engineering standards for highway infrastructure, ensuring durability and compliance with state and federal transportation regulations. The successful bidder will be responsible for logistics, labor, and coordination required to complete the installations in accordance with project specifications and timelines.

Public Services

POSTED

about 19 hours ago

DEADLINE

in about 2 months

Paving and Asphalt SurfacingThe contract entails the placement of aggregate base, binder course, and hot mix asphalt surface layers for a paving project, with all associated work including compaction, rolling, and joint sealing required to meet technical standards. Work must be performed in accordance with industry best practices to ensure pavement integrity, durability, and safety. The solicitation is designated as a subcontract under NAICS code 238990 and is managed by the Public Services agency in Virginia. Bids are due by September 3, 2026, and the project will be executed at an unspecified location within the state. The opportunity is open for subcontractors to respond to the procurement, with no set-aside provisions specified. Interested parties must access the full solicitation details through the provided online portal.

Public Services

POSTED

about 19 hours ago

DEADLINE

in about 2 months

Construct Parking and Roadway Camp Murray, WA

W7N6 Uspfo Activity Waang 194

POSTED

about 20 hours ago

DEADLINE

N--Services to replace manhole covers & security gateThis contract is a combined synopsis and solicitation for non-personal services to replace three manhole covers and frames and the main entrance security gate at the National Weather Service Weather Forecast Office in San Juan, Puerto Rico. The requirement is set aside exclusively for small business concerns under NAICS code 238990 with a size standard of $19.0 million, and it is issued as a firm-fixed price request for quotation under FAR Part 12. The work must be completed within 90 days from the Notice to Proceed, with performance expected to begin no later than 90 business days after receipt of that notice, although faster completion is preferred. The contract covers two line items: CLIN 0001 for replacing the manhole covers and frames, where Manholes 1 and 2 must be constructed from recycled resin composite, glass fiber plastic, or equivalent, and Manhole 3 from cast iron, and CLIN 0002 for installing a turnkey cantilever security slide gate with specified heavy welded steel framing, new vehicle gate loops, and painting to match the existing fence line. A detailed Statement of Work, supporting photographs, blueprints, and the Davis-Bacon Act General Decision PR20260037 Rev 01 are incorporated by reference, and all quotes must include signed Construction Order Certifications and comply with the SF 18 template. The solicitation requires all offerors to maintain an active registration in the System for Award Management (SAM.gov) with a valid Unique Entity ID and CAGE code, and quotes must be submitted electronically to kirsten.keen@noaa.gov no later than 10:00 a.m. MDT on July 23, 2026, following an amendment that extended the original deadline. Quotes may be submitted on the SF-18 form or company letterhead, but must include signed SF-18 and SF-30 documents acknowledging amendments. A payment bond or irrevocable letter of credit is required for quotes exceeding $35,000. Evaluation will be based on technical approach and relevant experience, with price assessed for completeness and reasonableness but not scored, under a trade-off award process. Contractors must comply with labor standards under the Davis-Bacon Act and related clauses, OSHA safety standards including fall protection, local and federal codes, and the Buy American Act for construction materials. A site visit is strongly encouraged to understand site conditions, and all

Department Of Commerce Noaa

POSTED

about 20 hours ago

DEADLINE

Z--PARKING LOT REPAIRSThe contract pertains to parking lot repairs at the National Weather Service Weather Forecast Office in Pleasant Hill, Missouri, under solicitation number 1305M326Q0292, issued as a Request for Quotation by the Department of Commerce, NOAA. The work involves providing all personnel, materials, labor, equipment, and supervision to perform asphalt milling, full-depth patching, asphalt overlay, and restriping in accordance with MoDOT standards and commercial paving industry practices, with the goal of protecting government vehicles, equipment, and staff. The contract is structured as a single firm-fixed-price purchase order with payment terms of Net 30, subject to the Prompt Payment Act and administered through the U.S. Department of the Treasury’s Invoice Processing Platform. The performance period is 60 days from the Notice to Proceed, and the place of performance is specifically identified as 1803 SW State Route 7, Pleasant Hill, MO. The solicitation is a Total Small Business Set-Aside under NAICS code 238990, with a small business size standard of $19.0 million, requiring offerors to maintain active SAM registration and provide their UEID/CAGE code. Evaluation is conducted on a Lowest Price, Technically Acceptable basis, with technical approach and experience serving as mandatory pass/fail gates; failure on either eliminates eligibility for award. All submissions must be emailed as PDF or Word documents to the designated point of contact and include completed representations, certifications, signed SF-18 and SF-30 forms, a detailed technical approach, and best and final pricing. A payment bond or irrevocable letter of credit is required, and contractors must comply with Davis Bacon Act wage rates specific to Cass County, Missouri, as well as Buy American requirements for construction materials. Safety protocols mandate daily use of cones, caution tape, and other safety devices, with ADA compliance required for handicap parking spaces. Contractors must adhere to federal labor standards, including prevailing wage requirements, and are prohibited from exercising command or control over government personnel. The contract incorporates numerous clauses related to whistleblower rights, subcontracting, labor standards, environmental compliance, payment procedures, and security prohibitions, many of which include deviations effective January 2026. The solicitation was originally issued July 1, 2026, with an initial response deadline of July 15, 2026, at 2:30 p.m. EDT, but was amended to extend the due

Department Of Commerce Noaa

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

Training Facility & Logistics SupportA secure, large-scale indoor industrial facility is required within a nine-hour drive of Moody Air Force Base to support full mission profile training, including environmental simulation and comprehensive logistics support. The facility must be capable of replicating real-world operational conditions to enable realistic and mission-critical training scenarios for military personnel. The contract is classified as a subcontract under NAICS code 531120, with a response deadline of July 22, 2026, and is managed by the Department of Defense through FA4830 23 Cons Cc. Performance is to occur at Fort Moore, Georgia, with the facility serving as the central hub for training activities and supporting the full spectrum of logistical needs required for sustained, high-fidelity exercises.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

about 20 hours ago

DEADLINE

Live Tissue Training (LTT) Program Support ServicesThe Live Tissue Training (LTT) Program Support Services contract seeks to deliver advanced medical training for military personnel using live tissue models to simulate surgical and trauma response scenarios, ensuring hands-on readiness under strict regulatory standards. The training is designed to replicate real-world combat medical conditions, enhancing the proficiency of personnel in high-stress, time-sensitive procedures while adhering to all applicable federal and military compliance frameworks. This subcontract emphasizes immersive, high-fidelity learning environments to improve clinical outcomes and operational effectiveness in battlefield medical scenarios. The contract is administered by the Department of Defense under agency FA4830 23 Cons Cc, with performance required at Fort Moore, Georgia, 31699. It falls under NAICS code 611430, indicating classification within medical and dental schools and other health-related educational services. The opportunity was posted on July 17, 2026, with responses due by July 22, 2026, specifying a narrow window for submission. While no solicitation number or set-aside details are provided, the focus remains on securing qualified subcontractors capable of delivering compliant, high-quality live tissue training services that meet the Department of Defense’s operational and ethical standards.

Professional and Management Development Training

POSTED

about 20 hours ago

DEADLINE

Full Mission Profile Combat Rescue & Medical TrainingA five-day full mission profile training program is being sought for the 38th Rescue Squadron to evaluate combat readiness, rescue operations, and advanced medical capabilities under realistic operational conditions. The training must simulate real-world scenarios to test and enhance the squadron’s ability to execute complex rescue missions with integrated medical support, ensuring personnel are prepared for high-stress, dynamic environments. This subcontract opportunity is tied to the Department of Defense through the FA4830 23 Cons Cc office, with performance required at Fort Moore, Georgia, under the NAICS code 611699 for other schools and instruction. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, with no set-aside classification specified and no designated point of contact provided.

All Other Miscellaneous Schools and Instruction

POSTED

about 20 hours ago

DEADLINE

38 RQS Full Mission Profile TrainingThe 23D Contracting Squadron at Moody AFB is seeking a contractor to deliver a five-day, full mission profile training program scheduled for July 27–31, 2026, under solicitation FA483026Q0053. The training must take place at a secure, large-scale indoor industrial facility located within a nine-hour drive of Moody AFB and must accommodate 24 personnel, including 20 students and 4 evaluators from the 38th Rescue Squadron. The program is designed to assess and validate combat readiness, rescue operations, and advanced medical capabilities under realistic, all-weather conditions in alignment with the Statement of Objectives. The contract will be awarded using the Lowest Price Technically Acceptable methodology, with travel expenses for venues outside the nine-hour radius factored into the evaluation. All required details, including technical specifications, evaluation factors, and compliance instructions, are found in the attached solicitation document and must be fully addressed by offerors. Proposals must be submitted by 9:00 AM EST on July 22, 2026, with questions due by the same deadline on July 20, 2026. The contracting officer is 1st Lt Nasir Smith and the contract specialist is SrA Maximos Ramirez, both reachable via email and phone provided in the solicitation. The performance location is designated as Fort Moore, Georgia, and the NAICS code for this acquisition is 611699. No set-aside is being applied, and the opportunity is open to all qualified vendors. The solicitation is fully electronic, with all documentation hosted through the SAM.gov platform and accessible using the provided UI Link.

All Other Miscellaneous Schools and Instruction

POSTED

about 20 hours ago

DEADLINE

Laser EtcherThe 74th Fighter Generation Squadron is seeking a commercial-off-the-shelf laser etcher system to establish an in-house capability for permanently marking squadron assets, tools, and equipment with critical identification information. This acquisition is essential to meet mission requirements under AFI 21-101, as hand engraving is insufficient for durability and material integrity. The system must be capable of engraving on a range of materials, including hardened tool steels like M43 and chrome-moly, as well as rubber, foam, plastic, acrylic, glass, and wood. A mandatory feature is a 12-inch minimum workpiece height capability, along with a 39-inch by 24-inch working area to accommodate large items such as torque wrenches and breaker bars. The equipment must support automatic laser selection based on material, include rotational attachments and task plates for cylindrical objects, and come with a camera system for precise alignment. It must operate on a standard 110V outlet, feature a 4-inch exhaust port, and include integrated design software compatible with Windows. The vendor must provide on-site installation, five-person operator training, a manufacturer warranty, and direct technical support contact information. The requirement is strictly for a ready-made COTS product with no customization allowed, and failure to acquire it would force costly and mission-threatening outsourcing. This is a total small business set-aside under NAICS code 333517, with responses due by July 21, 2026, and the office managing this effort is located at Moody AFB, Georgia, with performance at Fort Moore.

Machine Tool Manufacturing

POSTED

about 20 hours ago

DEADLINE

38 RQS Free Fall training

All Other Miscellaneous Schools and Instruction

POSTED

DEADLINE

FPV Quadcopters, Unassembled FPV Quadcopter Kits, FPV Pilot KitsThis sources sought notice is issued for market research to identify potential vendors capable of supplying commercial off-the-shelf 7-inch First Person View quadcopter drones, unassembled drone kits, and FPV pilot kits including goggles and controllers. The government seeks 100 complete drones, 16 unassembled kits, 17 pilot kits, and one 3-day user training session. All equipment must weigh between one and two pounds,具备 a minimum payload capacity of five pounds and maximum of six pounds, operate at speeds between 100 and 120 miles per hour, and be fully NDAA-compliant under Section 848/889, ensuring no restricted foreign components in the flight controller, long range system, video transmitter, camera, or goggles. The systems must feature a solder-free design for easy field maintenance and an open architecture with no proprietary restrictions. Responses must include company details, a capability statement, socio-economic status, and reference the Sources Sought ID FA483026Q0035. No financial reimbursement will be provided for submission costs, and this notice does not obligate the government to issue a contract. All submissions must be emailed to SSgt Justin De Jesus by 4:00 PM Eastern Time on Monday, 20 July 2026. The requirement is set aside exclusively for small businesses as defined by the SBA.

Aircraft Manufacturing

POSTED

DEADLINE

Pop-up Target SystemThe contract solicitation FA483026Q0043 seeks a Total Small Business Set-Aside for the procurement of a comprehensive pop-up target system to be deployed at the Grand Bay Range, Moody Air Force Base, Georgia. The contractor must deliver nineteen new battery-powered pop-up targets designed to precisely match the existing ATA "PIT" target form factor and size for seamless integration into current berms. Alongside the targets, the contractor is required to supply two battery-powered control tablets for range tower operators and three battery-powered hand-held controllers for maintenance personnel, all running software capable of accurate hit scoring, real-time battery monitoring, control of background lighting effects, and triggering simulated return gunfire modes. A dependable long-range wireless communications network with a minimum two-mile operational range must be established between the range tower and target areas, with network components permitted to be solar- or battery-powered. The contractor must also provide a legacy upgrade package to ensure full compatibility of existing ATA pop-up targets and chassis with the new system. Comprehensive training for Grand Bay Range personnel covering routine operations, troubleshooting, battery and solar maintenance, and software use is required. A site visit was conducted on July 1, 2026, at the Grand Bay Range East Gate in Valdosta, Georgia, with all vendor inquiries due by July 8, 2026, and responses to those inquiries published via amendment on SAM.gov. Responses to this solicitation must be submitted electronically via email to the designated points of contact no later than 2:00 PM EST on July 20, 2026, and must reference the RFQ number and title. The NAICS code for this procurement is 333310, and only small business concerns qualify to respond. All hardware and software deliverables must be installed and trained at the Grand Bay Range, with no specified contract value or pricing details provided.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Legacy System Upgrade and Integration PackageThe contract seeks the development of a system upgrade package to modernize legacy pop-up target systems by integrating them with new control and communications infrastructure, ensuring enhanced operational effectiveness and compatibility with current military standards. This effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 541511 indicating it falls under Custom Computer Programming Services. The work is specifically tied to Fort Moore, Georgia, where the upgraded systems will be deployed and tested as part of broader modernization initiatives within the Department of Defense. The solicitation was posted on June 22, 2026, and responses are due by July 20, 2026, at 6:00 PM Eastern Time, leaving a five-week window for qualified small businesses to prepare and submit proposals. The contracting activity is managed by the FA4830 23 Cons Cc office, and the project emphasizes technological modernization while maintaining strict compliance with federal subcontracting guidelines for small business participation.

Custom Computer Programming Services

POSTED

DEADLINE

Target Control and Monitoring Software DevelopmentThe contract seeks the development and integration of specialized software to enhance pop-up target systems with advanced functionality including hit scoring, precise lighting control, simulated return fire effects, and real-time battery monitoring. The software must be designed for seamless operation within military training environments at Fort Moore, ensuring accurate feedback and reliable performance under field conditions. The project requires robust real-time data processing and coordination between hardware components to deliver immersive and responsive training experiences. This is a small business set-aside subcontract under the NAICS code 541512 for computer systems design services, issued by the Department of Defense through the FA4830 23 Cons Cc office. Proposals must be submitted by July 20, 2026, and performance is expected to take place primarily at Fort Moore, Georgia. The contracting authority emphasizes capabilities that enable modernized, tech-driven live-fire training systems, with a focus on integration, reliability, and operational readiness in support of defense training objectives.

Computer Systems Design Services

POSTED

DEADLINE

Range Tower and Maintenance Control Hardware SupplyThe contract calls for the supply of ruggedized, battery-powered tablets and handheld controllers to support range operators and maintenance personnel at Fort Moore, Georgia, under a total small business set-aside as defined by the SBA. These devices must be engineered for harsh operational environments typical of military training ranges, ensuring durability, reliable performance, and extended battery life without requiring frequent recharging or maintenance. The solicitation is designated as a subcontract under NAICS code 334511, which classifies the manufacture of computer and peripheral equipment, and is open exclusively to small businesses as part of a federal set-aside program aimed at promoting small business participation in defense contracts. The opportunity was posted on June 22, 2026, with a response deadline of July 20, 2026, at 6:00 p.m. EST, and is managed by the Department of Defense through the FA4830 23 Cons Cc contracting office. Performance will be carried out at Fort Moore, with all delivered equipment expected to meet stringent military-grade specifications for environmental resilience, security, and interoperability with existing range control systems. While specific technical requirements are not detailed here, proposers must demonstrate capability to deliver hardware that supports seamless command, control, and maintenance functions in field conditions, and satisfy all compliance, certification, and delivery timelines mandated by the contracting agency.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Long-Range Wireless Communications Network Supply and InstallationThe contract calls for the supply and deployment of a long-range wireless communications network capable of operating over a minimum distance of two miles, specifically designed for use on remote military ranges. The system must support reliable, high-performance connectivity in challenging field environments and may incorporate optional solar-powered or battery-powered components to enable operation in locations without access to conventional power sources. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the North American Industry Classification System code 334220 indicating it pertains to communications equipment manufacturing. Performance of the work is required at Fort Moore, Georgia, with a response deadline of July 20, 2026, and the solicitation originates from the Department of Defense under the agency designation FA4830 23 Cons Cc.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE