Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

On-Site Start-up and Operational Verification Services

Active

Federal

Response Deadline09/25/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the CDC Office of Acquisition Services for the Department of Health and Human Services, involves the on-site installation and operational verification of a DCAT 25 tensiometer system. The work will be performed in Pittsburgh for the NIOSH Pittsburgh Mining Research Division, focusing on the assembly and measurement verification of adhesion, contact angle, interfacial tension, and surface tension. The selected provider is responsible for delivering a fully operational system and providing technical training to NIOSH staff using specific verification standards and calibration tools. This project falls under NAICS code 811210 and requires the completion of all physical start-up procedures to ensure the system meets operational requirements.

General Info

CDC subcontract for DCAT 25 tensiometer installation and staff training in Pittsburgh.

Agency

Department Of Health And Human Services → CDC Office Of Acquisition ServicesView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Pittsburgh, PA, 15236, USA

Set-Aside

NONE

Documents

This scope was carved out of 75D30126Q79273.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DataPhysics Dynamic Contact Angle Measuring Device Tensiometer (DCAT 25)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Health And Human Services → CDC Office Of Acquisition Services

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Health And Human Services → CDC Office Of Acquisition Services

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs the physical installation, start-up, and operational verification of a DCAT 25 tensiometer system for prime contractors on CDC/NIOSH Pittsburgh Mining Research Division projects. Assembles the system and verifies measurements for surface tension, interfacial tension, contact angle, and adhesion. Provides technical training for NIOSH staff using calibration tools and verification standards. Delivers a fully operational, verified system.

Similar Contracts

Same NAICS industry code

Copier Maintenance for Tuscaloosa TPSC 27

Solicitation # SRC0000036383

This maintenance agreement for Tuscaloosa TPSC covers two Sharp copier models, MXM363N with serial number 55021175 and MXM364N with serial number 55021185. The contract period runs from October 1, 2026, to September 30, 2027, and specifically includes services for black and white copies with an estimated volume of 25,000 copies. The solicitation, identified as SRC0000036383, was posted on September 23, 2026, with a response deadline of September 28, 2026. Managed by the state of Alabama for the Tuscaloosa TPSC organization, the primary point of contact for this requirement is Aarin Dore.

TUSCALOOSA TPSC

POSTED

about 7 hours ago

DEADLINE

J--Maintenance-Skalar Formacs HT TOC/TN Analyzer, EPA

Solicitation # 68HE0826Q0053

The Environmental Protection Agency Region 8 Contracting Office is seeking a contractor for the maintenance of a Skalar Formacs HT TOC/TN Analyzer. This solicitation, identified by number 68HE0826Q0053, falls under NAICS code 811210 and is managed by the office located in Denver, Colorado. The services will be performed in Lakewood, Colorado. Interested parties must submit their responses by September 24, 2026, at 8:30 PM. The primary point of contact for this requirement is Ryan A. Schlenker.

Region 8 Contracting Office

POSTED

about 11 hours ago

DEADLINE

in about 22 hours

61--DISTRIBUTING SYSTEM, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB42

This presolicitation under number N0038326QNB42 is for the repair or modification of a distributing system, specifically NSN 7R-6150-015591184-H1, with a quantity of three units delivered FOB Origin. Due to the flight critical nature of the item and a lack of sufficient technical data for open competition, the government requires source approval prior to contract award. Only previously approved sources have been solicited, though new applicants may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The solicitation is managed by the Department of Defense through the Navsup Weapon Systems Support office in Philadelphia. Proposals must be submitted by November 9, 2026. Because the government is not utilizing FAR Part 12 for commercial item acquisition, interested parties must notify the contracting officer within 15 days if they can satisfy the requirement with a commercial item. Failure to provide all necessary source approval data will result in the proposal not being considered for award.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

in about 2 months

Senseeker Test Unit Service

Solicitation # N00173-26-Q-1301396215

Naval Research Laboratory

POSTED

about 11 hours ago

DEADLINE

H244--ME - TRANSFER SWITCH MAINT BASE PLUS 4 - CO (VA-26-00004264) 589-26-3-5329-0002

Solicitation # 36C25526Q0680

The Department of Veterans Affairs, Network Contracting Office 15, is seeking a service agreement for the full-service support of Automatic Transfer Switches (ATS) at the Harry S. Truman Memorial Veterans Hospital in Columbia, Missouri. The contract covers both scheduled preventive maintenance and unscheduled emergent repairs for a variety of ASCO, Zenith, and Metron transfer switches. The period of performance consists of a base year starting September 28, 2026, with four subsequent option years, extending the total duration through September 27, 2031. The contractor is responsible for providing all parts, labor, and travel, and must ensure all preventive maintenance is performed by manufacturer-certified technicians in accordance with NFPA 110 standards. Award will be made based on the Lowest Price Technically Acceptable (LPTA) process, where technical acceptability is evaluated on a pass/fail basis. To be considered technically acceptable, offerors must provide evidence of being fully qualified through specific training and hands-on experience with ATS equipment, demonstrate the capability to meet detailed reporting and maintenance requirements, and submit a signed certification regarding limitations on subcontracting. The contract is designated as a total set-aside for verified Service Disabled Veteran Owned Small Businesses (SDVOSB). Key deliverables include electronic service reports submitted within seven days of work completion and a comprehensive annual equipment condition report.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 11 hours ago

DEADLINE

Surgical Instrument Maintenance and Repair Services

Solicitation # 36C24227Q0016

Solicitation 36C24227Q0016 is issued by the Department of Veterans Affairs Network Contracting Office 2 for surgical instrument maintenance, repair, and refurbishment services at the Brooklyn and Manhattan campuses of the New York Harbor Healthcare System. The scope of work includes preventive maintenance, sharpening, calibration, and electrical safety inspections for various specialty trays, such as Ortho and ENT, as well as laparoscopic instruments and surgical knives. Services must be performed either offsite or onsite using a self-sustained mobile repair vehicle. The contract is a total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 811210. The contract structure consists of a base period starting December 10, 2026, followed by four optional extension years. Award will be based on the Lowest Price Technically Acceptable (LPTA) methodology, evaluating technical capability, past performance, and the total aggregate cost of the base and option periods. Strict quality standards are required, including ISO 13485 certification for the vendor, NIST-traceable calibration for testing equipment, and compliance with ANSI-AAMI ST-79 part 7.7. Additionally, technicians must possess OEM factory-training credentials and certifications such as HSPA CCSVP, CRCST, or CBSPD, with a minimum of three years of experience in surgical instrumentation repair. The vendor is required to provide specific equipment at no charge, including laparoscopic insulation continuity testers and latex-free scissor test band rolls for each campus. All repaired instruments must preserve original manufacturer part and catalog numbers as well as Censis markings. The contractor must also maintain specific insurance coverages, including 500,000 dollars in general liability and 200,000 dollars in automobile liability. Submissions must be provided in two parts, covering technical capability and the price quote, and must include a detailed management plan and technician resumes.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 11 hours ago

DEADLINE

INDICATOR,SIGHT,LIQ — 6680015229243 — N0010426QTC46

Solicitation # N0010426QTC46

This is a competitive solicitation from the Department of Defense, specifically Navsup Weapon Systems Support Mech, for the repair of liquid sight indicators. The government is seeking a firm-fixed price quote from an authorized repair source. Evaluation of offers will be based on best value, prioritizing price, past performance, and supplier performance risk. Quotes must include the unit repair price, total repair price, and the repair turnaround time. The contractor is required to perform all work according to established repair and overhaul standards, including specific cage codes and reference numbers. Any changes in design or part numbers must be approved by the contracting officer via a specific coding system. Quality assurance is the responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Packaging must adhere to MIL-STD 2073 standards.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

INDICATOR,LIQUID QU — 6680015607749 — N0010426QNF32

Solicitation # N0010426QNF32

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks a contractor for the repair of Liquid Quantity Indicators. The contract is a fixed-price effort that requires the contractor to perform a teardown and evaluation of the provided carcasses within 90 days to submit a firm-fixed price quote. A requested repair turnaround time of 90.337 days is established, and failure to meet this timeline will result in unit price reductions. The government also includes an option to increase the quantity of items for repair 365 days after the award. Key requirements include strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging. The material must be entirely free of metallic mercury contamination due to its use on submarines and surface ships. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization to prove they are an authorized distributor. The contract is certified for national defense under the Defense Priorities and Allocations System and requires a one-year warranty from the date of delivery.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

BOP CONTROL SYSTEM SUPPORT

Solicitation # 2139258

The New York Power Authority is soliciting proposals for BOP Control System Support under solicitation number 2139258. A critical requirement of this contract is that only original equipment manufacturer parts will be considered, as alternate manufacturer parts are strictly prohibited. Interested bidders must obtain all official documents and addenda through the New York Power Authority website or the Ariba platform to ensure their responses are complete and valid. The response deadline for this solicitation is October 15, 2026. The primary point of contact for this procurement is Nelson Santos, who serves as the Site Buyer. This opportunity is categorized as a SLED organization contract to be performed within the state of New York. It is noted that Lone Star Controls has been awarded an identical or substantially similar contract within the last five years.

Power Authority of New York

POSTED

about 19 hours ago

DEADLINE

POWER DISTRO UNIT — 5895016076458 — N0010426QNF24

Solicitation # N0010426QNF24

This solicitation is for the repair of a Power Distro Unit, specifically part number MPD411425-013. The contract is issued by the Navsup Weapon Systems Support Mech under Emergency Acquisition Flexibilities and is designated as a DO rated order under the Defense Priorities and Allocations System. The requirement includes a one-year warranty from the date of delivery and a potential option for increased quantity 365 days after the award. The selected contractor must provide an estimated repair price and then submit a firm-fixed price quote within 90 days of receiving the carcass after performing a teardown and evaluation. The requested repair turnaround time is 118.625 days. Key compliance requirements include adherence to MIL-STD-129 for marking and MIL-STD-2073 for packaging, as well as a strict prohibition against mercury contamination. If the offeror is not the original equipment manufacturer, they must provide a signed letter of authorization from the OEM.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMB — 5998016470062 — N0038326QNA93

Solicitation # N0038326QNA93

This solicitation from Navsup Weapon Systems Support is for the repair of three units of Circuit Card Assemblies, identified by National Stock Number 5998 016470062. The contract includes an initial induction period of 365 calendar days, with a government option to extend this for an additional year. Contractors must provide pricing for the initial units and option pricing for up to 10 units over the total contract period. The work will be performed by Simmonds Precision Products in Vergennes, Vermont, and requires adherence to strict quality standards, including ISO 9001 or SAE AS9100, and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The scope of work involves returning units to a Ready For Issue condition through overhaul, upgrade, or repair. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 series wire and compliance with IPC/EIAJ-STD-001C for personnel. The contract establishes specific protocols for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from the government. Additionally, the contractor is responsible for providing all necessary tooling and materials, with a strict prohibition on part cannibalization unless specifically approved by the PCO.

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

AMP MODULE — 5999015327254 — N0010426QQC67

Solicitation # N0010426QQC67

This solicitation is for the repair of AMP MODULEs under a fixed-price contract issued by the Navsup Weapon Systems Support Mech. The government requires a Repair Turnaround Time of 81 days, measured from the physical receipt of the asset to final government acceptance. Failure to meet this timeline will result in a per-unit monthly price reduction, which the contractor must specify in their quote. Government Source Inspection is required, and all freight is handled by the Navy as per the Commercial Asset Visibility Statement of Work. The contractor must be an authorized distributor of the original manufacturer and provide proof of such authorization. The scope includes adhering to specific quality assurance standards, marking requirements per MIL-STD-130, and packaging per MIL-STD 2073. The government also reserves the right to increase the quantity of supplies through an option for increased quantity within 365 days. Quotes must include unit and total pricing, the proposed turnaround time, and the cost for testing and evaluation if the item is determined to be beyond economical repair.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Health And Human Services → CDC Office Of Acquisition Services

Same awarding agency

Specialized Transport and Delivery of Precision Laboratory InstrumentationThis subcontract through the CDC Office of Acquisition Services involves the specialized packaging, transport, and delivery of a multifunctional force tensiometer system, specifically the DCAT 25, for the NIOSH Pittsburgh Mining Research Division. The contractor is responsible for securing sensitive scientific instrumentation to prevent calibration drift and utilizing climate-controlled or shock-absorbent vehicles to ensure the equipment remains intact during transit from the warehouse to the designated facility in Pittsburgh. The project falls under NAICS code 484220 and is managed by the Department of Health and Human Services. Key operational requirements include the secure offloading of the system at the delivery site to support prime contractors on critical research projects.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 11 hours ago

DEADLINE

DataPhysics Dynamic Contact Angle Measuring Device Tensiometer (DCAT 25)

Solicitation # 75D30126Q79273

Solicitation 75D30126Q79273 is a sole-source acquisition by the CDC Office of Acquisition Services to procure one high-precision DataPhysics DCAT 25 Multifunctional Force Tensiometer system or equivalent. The equipment, which includes integrated analytical software, peripheral measurement apparatus, and automated liquid dosing modules, will be utilized by the NIOSH Pittsburgh Mining Research Division for occupational health and safety research involving surface and interfacial tension, contact angles, and adhesion. The contract is structured as a Firm-Fixed-Price purchase order and includes requirements for the contractor to provide packaging, transport, delivery, on-site technical start-up, system verification, and user training at the facility in Pittsburgh, Pennsylvania. The government intends to award the contract to DataPhysics Instruments USA Corp (also referenced as MTS Systems Corporation) based on the determination that only one responsible source can satisfy the requirements. Delivery is required within 120 days after receipt of order. Offerors must be registered in the System for Award Management and submit a signed quotation by September 25, 2026. Key compliance requirements include adherence to HHS Section 508 accessibility standards and the submission of an AI Compliance and Risk Management Plan if artificial intelligence is utilized in contract performance. Payment will be processed via the Invoice Processing Platform and electronic funds transfer.

Analytical Laboratory Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Maptek Stationary LiDAR Scanner Systems SupplyThis subcontract through the CDC Office of Acquisition Services involves the supply of two factory-calibrated stationary LiDAR scanner systems for prime contractors supporting CDC/NIOSH mining research projects. The procurement specifically requires Maptek SR3-CL and NS4 units configured for 90-degree underground roof data capture, accompanied by FZG2 field controllers, vehicle mounts, and underground lighting kits. Performance for this contract is centered in Pittsburgh, Pennsylvania, under NAICS code 334511. All delivered equipment must comply with HHS Section 508 ICT accessibility standards to ensure full regulatory alignment.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 17 hours

Maptek PointStudio Software Licenses and MaintenanceThis subcontract through the CDC Office of Acquisition Services provides brand-name Maptek PointStudio software licenses and annual maintenance for prime contractors supporting CDC/NIOSH mining safety projects. The procurement includes active software licenses and subscriptions for four units, specifically incorporating Geotechnical Tools and Rock Bolt Tools add-on modules designed for the processing and analysis of LiDAR point clouds. The contract is categorized under NAICS code 513210 and requires strict adherence to Section 508 compliance with HHS ICT accessibility standards. Performance of the contract is centered in Pittsburgh, Pennsylvania, ensuring that the necessary software tools are available to support critical mining safety research and operational objectives.

Software Publishers

POSTED

DEADLINE

in about 17 hours

Maptek SR3-CL and NS4 Stationary LiDAR Scanners

Solicitation # 75D30126Q79286

The Centers for Disease Control and Prevention, on behalf of the National Institute for Occupational Safety and Health, is seeking the procurement of two new, factory-calibrated stationary LiDAR scanner systems for the Pittsburgh Mining Research Division. The requirement consists of one Maptek SR3-CL system, including an underground lighting kit and FZG2 field controller, and one Maptek NS4 system, including a vehicle mount kit. These systems are specifically required for their 90-degree scan range to capture accurate pointclouds of underground environments and RGB data to differentiate geologic units. This acquisition is conducted as a commercial product procurement under FAR Part 12, with the government intending to award a Firm-Fixed-Price purchase order on a sole-source basis to Maptek Inc. dba KRJA Systems, Inc. Delivery is required FOB Destination to Pittsburgh, Pennsylvania, within 60 days after receipt of order. Offerors must comply with HHS Section 508 accessibility standards and provide an AI Compliance and Risk Management Plan if artificial intelligence is utilized in the performance of the contract. Payment will be processed electronically via the Department of Treasury Invoice Processing Platform.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 17 hours

Maptek PointStudio License with Geotechnical Tools

Solicitation # 75D30126Q79280

The Centers for Disease Control and Prevention, on behalf of the National Institute for Occupational Safety and Health, is seeking a sole-source, Firm-Fixed-Price contract for brand-name Maptek PointStudio software licenses, subscriptions, and maintenance. This requirement includes the core PointStudio software along with Geotechnical Tools and Rock Bolt Tools add-on modules, which NIOSH researchers use to analyze LiDAR point clouds to improve safety and monitor ground conditions in underground mines. The government intends to award this contract to Maptek Inc. dba KRJA Systems, Inc., as they are determined to be the only responsible source capable of meeting the agency's minimum requirements. The scope of work consists of four specific line items: annual maintenance for PointStudio and Geotechnical Tools, and annual subscriptions for Geotechnical and Rock Bolt Tools. All deliverables must be provided electronically to the end-user and the Contracting Officer's Representative within 60 days after receipt of order. Offerors must provide an active SAM.gov Unique Entity Identifier and CAGE code, and they are required to disclose any use of Artificial Intelligence, which would necessitate a Pass/Fail rated AI Compliance and Risk Management Plan. Additionally, all electronic content must adhere to HHS acceptance criteria and Section 508 accessibility standards. Proposals were due by September 24, 2026, with a requirement that quoted pricing remain firm for at least 30 calendar days.

Software Publishers

POSTED

DEADLINE

in about 17 hours

Environmental Monitoring Hardware Supply and InstallationThis subcontract for the CDC Office of Acquisition Services involves the supply and installation of IntelliSense hardware components to expand monitoring capabilities for prime contractors on DHCPP projects. The scope of work includes the installation, configuration, and setup of new probes and controllers to ensure full interoperability with existing systems, as well as the performance of IQ/OQ qualification for all new additions. The contractor is required to provide a one-year hardware warranty and deliver fully installed and qualified monitoring points. This project falls under NAICS code 238210 and is performed in the 30329 zip code area, with a response deadline of September 28, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

ISO 17025 Certified Calibration ServicesThis subcontract through the CDC Office of Acquisition Services provides NIST-traceable calibration and recalibration services for temperature, humidity, and CO2 environmental monitoring probes. The services are designed to support prime contractors on CDC DHCPP projects, ensuring that all probes maintain the accuracy required for CLIA, ISO, and QMML compliance. The selected provider must hold ISO 17025 certification and utilize NIST-traceable equipment to perform the calibrations. Deliverables include formal calibration certificates and reports for every probe serviced. The contract falls under NAICS code 811310 and is performed in the 30329 zip code area.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

IntelliSense System Maintenance and Technical SupportThe IntelliSense System Maintenance and Technical Support subcontract, issued by the CDC Office of Acquisition Services under the Department of Health and Human Services, focuses on the operational support and system administration of the IntelliSense automated environmental monitoring system. The contractor is responsible for providing 24/7 remote and onsite technical assistance, managing server software and firmware updates, and conducting annual IQ/OQ procedures. Additionally, the scope includes training staff on probe replacement and the delivery of detailed support logs and IQ/OQ reports. Technical requirements for this engagement include strict adherence to Section 508 compliance and FIPS 140 validation to ensure the secure encryption of personally identifiable information. The work is categorized under NAICS code 811210 and is performed in the 30329 zip code area. Interested parties must respond by September 28, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Maintenance Agreement - Automated Equipment Monitoring

Solicitation # 75D301-26-Q-79283

The Centers for Disease Control and Prevention is seeking a single, firm-fixed-price contract for commercial maintenance and support services for the IntelliSense automated environmental monitoring system in Atlanta, Georgia. The scope of work encompasses preventive and corrective maintenance, calibration, IQ/OQ, technical support, software and firmware updates, and training to ensure continuous monitoring capabilities. Additionally, the contract includes an optional CLIN for the installation, configuration, and qualification of additional monitoring points and hardware. This solicitation, numbered 75D301-26-Q-79283, is managed by the CDC Office of Acquisition Services under NAICS code 811210. Responses are due by September 28, 2026. All provided services and components must be fully compatible and interoperable with the existing IntelliSense environment.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Centrifuge Calibration and Maintenance ServicesThis subcontract for Centrifuge Calibration and Maintenance Services supports prime contractors on CDC NIOSH projects in Morgantown, West Virginia. The scope of work involves the calibration of rotational speed, verification of temperature control systems, and validation of timing functions for laboratory centrifuges to ensure they operate within manufacturer specifications. Technicians will utilize precision tachometers and certified temperature probes to maintain laboratory quality standards and provide formal calibration certificates and operational verification reports. Managed by the CDC Office of Acquisition Services under the Department of Health and Human Services, this opportunity falls under NAICS code 811210. The solicitation was posted on September 10, 2026, with a response deadline of September 25, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Data Governance and Compliance OversightThe Data Governance and Compliance Oversight subcontract, issued by the CDC Office Of Acquisition Services under the Department of Health And Human Services, focuses on maintaining strict adherence to DoD data-sharing agreements, HIPAA, and DoD Instruction 6025.21. The primary objective is to manage security protocols and data access controls for sensitive health information, including the implementation of audit logs and privacy impact assessments. This engagement is categorized under NAICS code 541618 and is centered in Bethesda, Maryland. The contract ensures that all sensitive health data is handled according to federal security standards to maintain privacy and regulatory compliance.

Other Management Consulting Services

POSTED

about 1 month ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS