Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on March 11, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Overhead Doors

Awarded
N0017825R6715Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project requires the contractor to bypass internal lock mechanisms and install Grade I panic bars, exterior trim, rim cylinders, strikes, and door closers at five specific locations: the B-Cafeteria, CM-Men's Dorm, CW-Women's Dorm, D-Recreation, and F-Vocational. All work must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. Performance requirements include a site survey to verify door dimensions and fire ratings, followed by a minimum of 10 consecutive cycle tests to ensure fail-safe operation. This is a fee-for-service subcontracting opportunity set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bidders must submit a lump sum price and individual pricing per deficiency by December 1, 2026. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification form, and three references for projects of similar scope. The contract is subject to various federal regulations, including FAR 52.222-4 for work hours and safety, and prevailing wage rates for building construction in Canyon and Gem Counties, Idaho, as specified in General Decision Number ID20250106. Final acceptance is contingent upon inspection by MTC at the designated point of delivery.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
SLED
Pauma Security Gate
Solicitation # 2026-27-06
Solicitation 2026-27-06 for the Valley Center Pauma Unified School District involves the fabrication and installation of automated, keypad-entry hinging steel security swing gates at entry and egress driveways in Valley Center, California. The project requires two powder-coated steel double swing gates, each 18 feet wide by 5 feet tall, and explicitly prohibits the use of chain link options. Key technical components include a mounted Knox switch with Fire Department filing, two entry remotes, gate hold timers, a mounted strobe detector for emergency vehicles, and a keypad similar to the Door King 1506-086. The contract value is capped at 1,000,000 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible bidders must hold a California contractor's license C13 or C-61/D28 and comply with prevailing wage requirements and Department of Industrial Relations registration. The project mandates a payment bond for 100 percent of the total bid price and a DVBE participation goal of at least 3 percent. Required submissions include a comprehensive bid packet featuring non-collusion affidavits, Iran Contracting Act certification, and fingerprinting certifications. Performance must be coordinated with the Director of Maintenance and Operations, with work hours restricted to 7:00 am to 5:00 pm, Monday through Friday. Additionally, contractors must adhere to strict hazardous material standards and California Air Resources Board compliance, with the district maintaining the right to terminate the agreement upon 30 calendar days written notice.
Valley Center Pauma USD

POSTED

about 11 hours ago

DEADLINE

in 5 days
NAICS: 238290
New
SLED
Districtwide Elevator And Wheelchair Lift Service, Preventive Maintenance, And Repairs Maintenance Services
Solicitation # 27.004
The Hayward Unified School District is soliciting bids under solicitation number 27.004 for districtwide elevator and wheelchair lift service, preventive maintenance, and repairs. The selected contractor will be responsible for the systematic examination, maintenance, and repair of all owned or leased systems, including hydraulic, electrical, and mechanical components, to ensure they remain in safe and usable condition. This contract requires the provider to hold an active C-11 Elevator Contractor license from the State of California and comply with all local and state codes, including Title 24 of the California Code of Regulations. The award will be granted to the lowest responsive and responsible bidder based on the rates provided in the bid form. Performance of regular services typically occurs Monday through Friday during standard business hours, while emergency repairs must be available 24 hours a day, seven days a week. The contractor must provide a bid bond of at least 10 percent of the bid amount and subsequently provide payment and performance bonds upon award. Invoicing is conducted monthly, with a requirement that authorized materials be invoiced at no more than 15 percent above the vendor's cost. Key compliance requirements include paying prevailing wages per the California Labor Code, submitting to fingerprinting and felony conviction certifications, and maintaining a minimum one-year warranty on work. All contracts are governed by the laws of the State of California.
Hayward Unified School District

POSTED

about 13 hours ago

DEADLINE

in 20 days

General Info

Contract Value

$47,534

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Dahlgren, VA, 22448, USA

Set-Aside

NONE

Award Issued Date

Documents

2

NSWCDD Door Replacements Statement of Work

PDF, High priority: read this firstsow
High

Solicitation N0017825R6715 - Rolling Door Installation

PDF, High priority: read this first70 pages · rfp
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Dahlgren
Contacts1 person available
OfficeDAHLGREN, VA, 22448-5154, USA
Office AddressDAHLGREN, VA, 22448-5154, USA
Contacts
Sharon Lathroum

Full Description

Show more
COMBINED SYNOPSIS/SOLICITATION #: N0017825R6715 Submitted by: Sharon Lathroum NAICS Code: 238290 FSC/PSC Code: 5520 Anticipated Date to be published in SAM.gov: 10 March 2025 Anticipated Closing Date: 18 March 2025 Contracts POC Name: Sharon Lathroum Email Address: contact@example.gov Code and Description: 5520 Millwork Includes: Door Frames; Doors; Window Frames; Window Sashes This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Synopsis/Solicitation N0017825R6715 is issued as a Request for Quotation (RFQ). The synopsis/solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulation as indicated in the attached SF1449. The SF1449 form is being utilized to generate the applicable clauses from the Standard Procurement System. This requirement is not eligible for small business set-aside. The Naval Surface Warfare Center Dahlgren Division (NSWCDD) intends to award on a sole source basis for the following products manufactured by Richmond Overhead Door, Inc.: (2) Overhead Doors, part number 001143523-1 The required doors are replacements for existing doors. Richmond Overhead Door, Inc. previously provided doors and installation that met or exceeded required specifications to include the original procurement of the existing doors through Naval Facilities Engineering Systems Command. Please include shipping/freight cost for FOB destination Dahlgren, VA 22448-5114. Simplified Acquisition Procedures (SAP) will be utilized for award in accordance with FAR Part 13. The order shall be firm fixed price. All responsible offerors must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3. Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied FAR Part 19. All offerors may submit a capability statement, proposal, or quotation which shall be considered by the agency. The completion and submission to the Government of an offer shall indicate the Offeror's unconditional agreement to the terms and conditions in this solicitation. Offers may be rejected if an exception to the terms or conditions set forth in this solicitation is taken. At time of proposal submission please submit any historical data and published pricing. Award will be made based on Lowest Price Technically Acceptable. In order to be eligible for award, firms must be registered in the System for Award Management (SAM). Offerors may obtain information on registration in SAM by calling +1 (555) 000-0000, or via the Internet at https://www.sam.gov. Proposal is due 18 March 2025, no later than 12:00 p.m. EST with an anticipated award date by 30 April 2025. Questions and responses regarding this synopsis/solicitation may be submitted by e-mail to contact@example.gov prior to the RFP closing. Please be sure to include Synopsis/Solicitation Number N0017825R6715 in the subject line. Attachments - -SF1449: Solicitation for Commercial Items

More opportunities from Department Of Defense → Nswc Dahlgren

Same awarding agency

NAICS: 541330
New
Federal
N0017827R3105 AI_INTELLIGENT AUTOMATION SUPPORT SERVICES
Solicitation # N0017827R3105
The Naval Surface Warfare Center Dahlgren Division is seeking qualified personnel to provide Applied Artificial Intelligence and Intelligent Automation Support Services for the H60 Department under solicitation N0017827R3105. This effort focuses on integrating state-of-the-art automation, AI/ML, and Machine Learning Operations (MLOps) into current and future naval weapon systems across the entire acquisition lifecycle, from material solution analysis to fielding. The scope of work includes systems engineering, software and hardware development, cybersecurity, Assured AI test and evaluation, and human systems integration. The contractor will be responsible for implementing quality assurance frameworks, maintaining system safety in accordance with MIL-STD-882, and managing the packaging of validated models into secure artifacts. The anticipated contract is a five-year Level of Effort task order, consisting of a twelve-month base period and four twelve-month option periods, available to SeaPort-NxG IDIQ MAC holders. While the primary contract type is expected to be Cost-Plus-Fixed-Fee, a hybrid structure incorporating Firm-Fixed-Price elements may be utilized. Performance will occur primarily at the contractor's facilities, with some on-site requirements at NSWCDD. Key requirements include DCAA-approved accounting systems for subcontractors, specific Cyberspace Workforce certifications for information assurance personnel, and adherence to strict security protocols, including NSA Type 1 encryption for classified fiber connections and SEAD-3 reporting requirements.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 4 months
View Details
NAICS: 332510
New
Federal
N0017827R4400 Rapid Engineering Development Models and Fabrication
Solicitation # N0017827R4400
The Naval Surface Warfare Center Dahlgren Division is seeking a vendor for a ten-year IDIQ contract, consisting of a five-year base period and five one-year option periods, with performance anticipated to begin by February 2029. The primary objective is the delivery of tactical systems to the warfighter, specifically focusing on prototype development, hardware fabrication, and project management. The scope includes engineering design, testing, drawing and bill of material development, and manufacturability analysis. This effort supports critical programs such as Battle Management Systems, Assault Amphibious Vehicle projects, robotic systems, and weapon control systems. This requirement is a total small business set-aside under NAICS code 332510. Qualified contractors must maintain ISO 9001:2015 and AS9100D certifications and adhere to strict quality standards, including IPC 610 and IPC A-600 Class 2 for circuit cards and IPC 620 for cabling. Deliverables are subject to Government-approved Factory Acceptance Tests and must comply with MIL-STD-130 for unique identification and SAE AS5553 for counterfeit prevention. Personnel must possess necessary security clearances and adhere to NISPOM and other Department of Defense security regulations. Interested parties must submit a capability statement of no more than ten pages by November 3, 2026, including company profiles, past performance as a prime contractor, and OCI certification or mitigation plans.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332313
New
Federal
EMI CHAMBER
Solicitation # N0017827QC601
The Naval Surface Warfare Center Dahlgren Division (NSWCDD) is soliciting quotes for the design and installation of a high-performance Electromagnetic Interference (EMI) Shielded Chamber and an associated RF Shielded Control Room in Dahlgren, Virginia. The required chamber must have internal dimensions of 36 by 20 by 13 feet, provide 100 dB of shielding from 2 MHz to 40 GHz, and feature a floor capable of supporting 8,000 pounds. Technical specifications include an electronically controlled personnel door, a bi-parting equipment door, waveguide air vents, and filtered power supplies compliant with MIL-STD-461. The procurement also includes an option for Z-fold tuners equipped with motors and controllers. This is a commercial item procurement conducted under FAR Part 12, with the award to be made on a Lowest Price Technically Acceptable (LPTA) basis. Quotes are restricted to Original Equipment Manufacturers (OEMs) or authorized resellers who provide a Letter of Authorization. Following Amendment 0002, the Statement of Work has been updated to Revision 4 and the response deadline has been extended to November 5, 2026, at 12:00 PM. Delivery is FOB Destination, and all invoicing must be processed electronically via Wide Area Workflow (WAWF). The project is unclassified and requires compliance with OSHA regulations and MIL-STD-130 for item identification.
Plate Work Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 493110
New
Federal
DNA Warehousing Support
Solicitation # N0017826R2500
Solicitation N0017826R2500 is a Request for Quotations (RFQ) issued by the Naval Surface Warfare Center Dahlgren Division (NSWCDD) for commercial warehousing, storage, and logistics support services at the Dam Neck Activity in Virginia Beach, Virginia. The requirement is a 100% set-aside for SBA-certified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) under NAICS 493110. The contract will be awarded as a standalone, commercial Firm-Fixed-Price agreement based on the Lowest Price Technically Acceptable (LPTA) basis. The scope of work includes providing technical, analytical, and supply chain management support for Operating Materials and Supplies (OM&S) and Plant Property and Equipment (PP&E), encompassing inventory management, material handling, freight transportation, and physical accountability. The project requires a dedicated staffing complement including a Program Manager, Warehouse Manager, Material Expeditor, Warehouse Specialists, Truck Drivers, and Material Coordinators. All personnel must possess a minimum DoD Secret security clearance. Key performance standards include maintaining 98% inventory accuracy and reporting property issues within 60 minutes of discovery. The procurement is conducted under FAR Part 12 and FAR Subpart 13.5 simplified acquisition procedures. While the original quotation deadline was October 29, 2026, it has been extended to November 13, 2026, at 12:00 PM EST. Awardees will be required to use Wide Area Workflow (WAWF) for invoicing and adhere to a Quality Assurance Surveillance Plan (QASP) to monitor performance.
General Warehousing and Storage

POSTED

3 days ago

DEADLINE

in 16 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS