Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Paint and Refinishing Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing paint and refinishing services specifically for commercial trucks, focusing on sanding, priming, painting, and clear-coating repaired body panels to ensure they match the original factory finish. It is categorized under the NAICS code 811121, which pertains to automotive body, paint, and interior repair shops. The contract is a Total Small Business Set-Aside under FAR 19.5, indicating that the opportunity is reserved exclusively for small businesses, supporting small business participation. The contract is issued by the General Services Administration (GSA), specifically through the GSA/FAS/TTL/QMD/AMC office. The work will be performed in Clarksville, with the zip code 37043, although full location details are limited. The solicitation was posted on May 4, 2026, and it is a subcontract opportunity. The absence of a solicitation number and point of contact suggests that interested parties should refer to the provided SAM.gov link to access the full solicitation and submission instructions.

General Info

Paint and refinishing services for commercial trucks, small business set-aside, Clarksville location.

Agency

General Services Administration → Gsa/fas/ttl/qmd/amcView Agency

NAICS

811121 - Automotive Body, Paint, and Interior Repair and MaintenanceView NAICS

Place of Performance

Clarksville, TN, 37043, USA

Set-Aside

SBA

Documents

This scope was carved out of 266FFAMC1.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Repair collision damage to 2019 INTERNATIONAL LT625

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Gsa/fas/ttl/qmd/amc

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Gsa/fas/ttl/qmd/amc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Sanding, priming, painting, and clear-coating of repaired body panels to match original factory finish on a commercial truck.

Similar Contracts

Same NAICS industry code

26-11159 IFB Paintless Dent Repair

Solicitation # 26-11159 IFB

Greene County, Missouri, is seeking one or more Paintless Dent Repair Service Providers under solicitation 26-11159 IFB to address hail damage sustained by approximately 171 vehicles during an event in April 2026. The final number of vehicles selected for repair will be determined based on the submitted bid pricing and available budget. Interested parties must submit their responses by the deadline of October 14, 2026. The primary point of contact for this opportunity is Kilina Goldenberg. Performance of the services will take place within the state of Missouri.

POSTED

about 15 hours ago

DEADLINE

Request for Proposals for Truck Wrapping Services

Solicitation # 2139268

The Queens Library is soliciting proposals from experienced and qualified firms and individuals to provide truck wrapping services under solicitation number 2139268. This procurement falls under the categories of advertising, graphic arts, marketing, and interior design. The contract is intended for a performance period of one year, with the services being executed in Queens, New York. Proposals must be submitted by October 22, 2026, at 3:00 PM. The procurement process is managed by the Queens Library procurement office, with William R. Funk serving as the Vice President of Procurement. Interested parties should direct all communications and submissions to the RFP Contact at 89-11 Merrick Boulevard, Jamaica, New York 11432, or via email at rfpcontact@queenslibrary.org.

POSTED

DEADLINE

156-27-055 Emergency Vehicle Upfitting – Ford F-150 K9 Units

Solicitation # 156-27-055

The Virginia State Police is soliciting bids under Unsealed Invitation for Bid 156-27-055 for the upfitting of five Ford F-150 K9 units. The selected contractor will provide all labor, installation services, and incidental supplies, such as wiring, connectors, and fasteners, to install VSP-furnished equipment. All work must be performed in a professional manner according to manufacturer instructions and accepted emergency-vehicle installation practices, utilizing automotive-grade connectors. The contractor is required to have EVT certification and a secure facility located within a 30-mile radius of the VSP Headquarters in Richmond, Virginia. Deliveries are to be made FOB destination with a desired delivery timeframe of 30 calendar days after receipt of order. This solicitation is set aside with award priority for DSBSD-certified micro businesses or small businesses, including certified women-owned and minority-owned businesses. The contract will be awarded on a grand total basis to the lowest responsive and responsible bidder, provided the pricing is determined to be fair and reasonable. Bidders must submit their proposals electronically via the eVA portal by September 30, 2026, and must include the State Corporate Commission Form, Vendor Data Sheet, and a complete Pricing Schedule to avoid being deemed nonresponsive. The contractor assumes full financial responsibility for any VSP vehicles or equipment lost, stolen, or damaged while in their custody and must maintain insurance according to the general conditions of the contract.

Virginia State Police

POSTED

DEADLINE

Request for Supplier Qualifications for Vehicle Modification Services

Solicitation # RFSQ 2027-11-CX

School District 36 Surrey in the Province of British Columbia is seeking qualified suppliers to provide vehicle modification services under solicitation number RFSQ 2027-11-CX. This request for qualifications is intended to identify capable vendors who can perform necessary modifications to the district's vehicle fleet within British Columbia. Interested parties must submit their qualifications by the response deadline of October 19, 2026, at 9:00 PM. Detailed information and submission processes are managed through the BC Bid portal.

School District 36 Surrey

POSTED

DEADLINE

PIN STRIPING,LRV,BLUE,,3MFB50 | 2101010

Solicitation # 2101010

Solicitation 2101010 is issued by the Dallas Area Rapid Transit Authority for the procurement of blue pin striping for light rail vehicles. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026. All bids must be submitted via the Bonfire platform and must reflect FOB Destination shipping terms, with freight costs included in the overall price. Delivery timing and rates are critical, as failure to meet specified schedules may result in rejection or termination for default. The contract is governed by the Authority's standard Purchase Order Terms and Conditions, which include strict requirements for invoicing and payment. Invoices must be submitted in triplicate and include the purchase order number, item description, quantities, and extended totals. Payment terms are Net 30, with payments issued 30 days from the receipt of the invoice or the order, whichever is later. The Seller is responsible for ensuring all supplies conform to provided drawings and specifications, with inspection and acceptance occurring at the destination. Additionally, the Seller must certify compliance with Texas state laws, including prohibitions against providing services to foreign terrorist organizations and agreements not to boycott Israel.

Dallas Area Rapid Transit

POSTED

DEADLINE

Volvo Equipment Maintenance and Repair (Labor)This subcontract for Volvo Equipment Maintenance and Repair (Labor) involves providing comprehensive mechanical services for Volvo equipment used by prime contractors on Town entity projects throughout Connecticut. The scope of work includes both in-shop and in-field repairs, utilizing specialized Volvo diagnostic tools and service vehicles, with provisions for portal-to-portal travel and mileage for all field service calls. The contractor is required to adhere to Connecticut Department of Labor prevailing wage regulations and must submit certified payrolls on a monthly basis. All completed equipment repairs must be delivered alongside the corresponding labor invoices. The solicitation was posted on September 17, 2026, with a response deadline of September 30, 2026, under NAICS code 811121 for the Fleet Maintenance agency in Connecticut.

Fleet Maintenance

POSTED

DEADLINE

Radio and Antenna InstallationThis subcontract for the Department of Agriculture's Rocky Mountain Regional Office involves the installation of mobile radio antennas and the integration of government-furnished equipment for USDA Forest Service vehicle projects. The scope of work includes mounting external mobile radio antennas, performing standard automotive electrical integration, and completing the final installation of EAB KNG M150 radios to ensure fully functional mobile radio systems. The project is designated as a total Small Business Set Aside under NAICS code 811121 and will be performed in Lakewood, Colorado. Interested parties must respond by September 25, 2026, following the posting date of September 17, 2026.

Rocky Mountain Regional Office

POSTED

DEADLINE

Emergency Lighting & Siren System InstallationThis subcontract through the Department of Agriculture's Rocky Mountain Regional Office involves the supply and installation of emergency warning systems for USDA Forest Service vehicle projects. The scope of work includes installing dual-color LED roof lightbars ranging from 48 to 55 inches, twelve supplemental LED warning lights with silicone lenses, and 100W siren speakers utilizing vehicle-specific brackets. Technical requirements include the use of automotive-grade color-coded harnesses, master disconnects, and the programming of Park Kill, Traffic Advisor, and 360 Scene Lighting to deliver fully operational systems. The project is designated as a Total Small Business Set Aside under NAICS code 811121, with the place of performance located in Lakewood, Colorado. Interested parties must respond by September 25, 2026, to provide these specialized emergency lighting and siren installations for prime contractors.

Rocky Mountain Regional Office

POSTED

DEADLINE

Retired Fleet Vehicle Tear-DownThis subcontract opportunity involves the removal of specialized equipment from retired fleet vehicles for the Pennsylvania Game Commission. The selected provider will work as a subcontractor for prime contractors to decommission vehicles by removing agency-sensitive equipment, including radios, lighting, sirens, and partitions, using standard automotive tools to ensure the vehicles are ready for auction. The project is categorized under NAICS code 811121 and was posted on September 16, 2026. Interested parties must submit their responses by the deadline of September 30, 2026. Further details and application processes are managed through the Pennsylvania eMarketplace portal.

Pennsylvania Game Commission

POSTED

DEADLINE

Law Enforcement Vehicle Upfitting & IntegrationThis subcontract for Law Enforcement Vehicle Upfitting and Integration involves the complete installation of specialized equipment for Pennsylvania Game Commission vehicle projects. The contractor is responsible for integrating agency-provided radio telecommunication systems, lighting packages, computers, partitions, and sirens into Silverado 1500, 2500, and Tahoe vehicles. All work must be performed in strict accordance with BLE Installation and Service Manuals to deliver fully upfitted and operational law enforcement vehicles. The project requires the use of professional vehicle lifts and electrical wiring tools to ensure proper installation. This opportunity is listed under NAICS code 811121, with a response deadline of September 30, 2026. The primary objective is to provide prime contractors with expert integration services that meet the specific operational needs of the Pennsylvania Game Commission.

Pennsylvania Game Commission

POSTED

DEADLINE

23BLE East Vehicle Upfit and Removals

Solicitation # 6100066694

The Pennsylvania Game Commission and the Bureau of Law Enforcement are seeking a qualified supplier to provide comprehensive design, procurement, and installation services for law enforcement vehicle upfits and the removal of equipment from retired fleet vehicles. The scope of work involves the installation of radio telecommunication systems, lighting packages, and other ancillary equipment into approximately 50 to 65 vehicles annually, specifically targeting Silverado 1500 PPV, Silverado 2500, and Tahoe models. The project is divided into two lots: Lot 1 covers vehicle upfits within 50 miles of the Southeast Regional Office in Reading, and Lot 2 covers removal services within 20 miles of the Harrisburg Headquarters. The contract is anticipated to begin around November 1, 2026, for the 2026-2027 fiscal years, with the possibility of four additional one-year renewals. Award will be granted to the lowest responsive and responsible bidder, with the Commonwealth reserving the right to award by lot, line item, or to a single vendor. Bidders must adhere to strict technical specifications detailed in the provided installation and service manuals, including specific electrical requirements and BCM wiring for surveillance mode. The selected contractor is responsible for pre-order field-measure verification and maintaining a production pace of approximately two vehicles per week. Compliance with the Reciprocal Limitations Act, Pennsylvania state labor laws, and worker safety regulations is mandatory. Payments will be processed via Automated Clearing House within 30 business days following the visual inspection and approval of the final products by the Project Manager.

Pennsylvania Game Commission

POSTED

DEADLINE

23BLE Central Region Vehicle Upfit

Solicitation # 6100066692

The Pennsylvania Game Commission and the Bureau of Law Enforcement are seeking three qualified radio and vehicle maintenance installers to provide upfitting services for patrol and supervisor vehicles in the Central Region. The scope of work includes the complete design, procurement of non-agency materials, and installation of radio telecommunication systems, lighting packages, and other ancillary equipment. Services also encompass pre-order field-measure verification, post-order follow-up, and the maintenance or tear-down of retired fleet vehicles for auction. The contract covers fiscal years 2026 through 2027, with options for four additional one-year renewals, and requires the vendor to maintain secured storage for all agency-supplied vehicles and components. Performance is centered around the Southcentral Regional Office in Huntingdon, Pennsylvania, with a required service radius of 50 miles. The project involves an estimated annual procurement of 50 to 65 vehicles, specifically targeting Silverado 1500, 2500, and Tahoe models. Awards will be based on a best value determination, specifically the lowest responsive and responsible bidder. The contractor must adhere to strict technical installation and service manuals and provide weekly status reports on project execution. Payment terms are Net30, and final product acceptance is contingent upon visual inspection and approval by the Project Manager.

Pennsylvania Game Commission

POSTED

DEADLINE

More opportunities from General Services Administration → Gsa/fas/ttl/qmd/amc

Same awarding agency

Vehicle Body and Structural Component SupplyThis subcontract opportunity with the General Services Administration involves the supply of automotive parts for prime contractors working on GSA vehicle repair projects. The selected provider will be responsible for sourcing and delivering OEM or approved equivalent body panels, structural frame components, and vehicle lighting units, ensuring all required itemized parts are provided with detailed pricing. The contract is designated as a Total Small Business Set Aside under NAICS code 444110 and will be performed in Houston, Texas. Interested parties must respond by September 29, 2026, following the posting date of September 14, 2026.

POSTED

DEADLINE

Vehicle Body and Frame Repair ServicesThe General Services Administration is seeking a small business subcontractor to provide vehicle body and frame repair services in Houston, Texas. The contractor will be responsible for performing comprehensive body damage repairs, straightening frames, and restoring structural components and lighting systems using specialized frame alignment equipment and replacement panels to ensure vehicles meet all operational and safety standards. This subcontract opportunity is designated as a total Small Business Set Aside under NAICS code 811121. Interested parties must submit their responses by September 29, 2026, to support prime contractors on GSA vehicle repair projects.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE

Repair collision damage to 2023 Dodge Durango Pursuit

Solicitation # 266FFAMC09

The General Services Administration (GSA) has issued solicitation 266FFAMC09 for the repair of collision and mechanical damage to a 2023 Dodge Durango Pursuit following a traffic accident. The scope of work requires a complete repair of the vehicle body, frame, lights, and structural components to return the unit to full service. This is a small business set-aside under NAICS codes 811111 or 811121, and the contract will be awarded to the lowest price technically acceptable (LPTA) offeror. The place of performance is located in Houston, Texas, and interested vendors are required to physically inspect the vehicle in person prior to submitting a quote, as no photographs will be provided. Vendors must comply with several strict regulatory and operational requirements, including adherence to industry standards, EPA and OSHA regulations, and local Department of Labor wage laws. All equipment must carry a manufacturer's warranty, and all repairs must include a standard warranty. Additionally, contractors must maintain valid business licenses, possess adequate insurance to cover GSA vehicles in their shop, and ensure MSDS documentation is available on-site. Quotes must be itemized and detailed, including individual parts prices, labor times, paint labor, and estimated delivery timelines. All offerors must be actively registered in the System for Award Management (SAM) and provide current representations and certifications. Payment will be processed via Government Purchase Card (Mastercard) once the vehicle has been delivered, inspected, and accepted.

General Automotive Repair

POSTED

DEADLINE

Quality Inspection and Compliance DocumentationThis contract involves performing final inspections, documenting repairs, and ensuring that vehicles comply with federal motor vehicle safety standards before delivery. It is a subcontract awarded under a total small business set-aside in accordance with FAR 19.5, emphasizing opportunities for small businesses. The work falls under NAICS code 541380, which pertains to testing laboratories. The contract is managed by the General Services Administration, specifically through the GSA/FAS/TTL/QMD/AMC office, with the place of performance located in Clarksville, ZIP code 37043. The scope highlights quality assurance and compliance documentation to verify that all safety standards are met, thereby ensuring vehicles are safe and ready for delivery to the end users.

Testing Laboratories and Services

POSTED

DEADLINE

Parts Supply – OEM and Aftermarket ComponentsThis contract pertains to the supply of both original equipment manufacturer (OEM) and aftermarket replacement parts, including essential vehicle components such as body panels, lights, mirrors, bumpers, and various mechanical parts necessary for repair purposes. It is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, ensuring the opportunity is reserved exclusively for small businesses. The contract falls under the North American Industry Classification System code 423120, which covers motor vehicle supplies and new parts merchant wholesalers. The contracting agency responsible for this procurement is the General Services Administration, specifically the GSA/FAS/TTL/QMD/AMC office. The performance location for the contract is identified as Clarksville, with the zip code 37043. Although the solicitation number and specific point of contact details are not provided, the contract was posted on May 4, 2026. This procurement supports the ongoing need for maintaining and repairing vehicles through reliable sourcing of critical replacement parts from qualified small business suppliers.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Electrical and Electronic Systems RepairThis contract involves the repair or replacement of damaged electrical and electronic components on a commercial truck following a collision. The scope includes work on wiring harnesses, lighting systems, sensors, electronic control units (ECUs), and dashboard instrumentation to restore full operational functionality. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, specifically categorized within the NAICS code 811198, which pertains to automotive electrical repair services. The contracting agency is the General Services Administration, with the place of performance located in Clarksville, zip code 37043. The contract was posted on May 4, 2026, and falls under the purview of the GSA’s Federal Acquisition Service. This opportunity is tailored to support small business participation in government contracts for specialized repair work on commercial trucks, ensuring that damaged electrical systems are properly addressed to meet operational and safety standards.

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Mechanical Systems Repair – Powertrain and DrivetrainThis contract focuses on diagnosing and repairing mechanical systems related to the powertrain and drivetrain of a 2019 INTERNATIONAL LT625 that has sustained damage in a collision. The scope of work includes engine, transmission, and differential repairs, ensuring that the vehicle's critical mechanical components are restored to proper working condition. The contract is a subcontract under a Total Small Business Set-Aside (FAR 19.5) and is classified under NAICS code 811111, which pertains to automotive mechanical and electrical repair and maintenance. The work will be performed in Clarksville, with the General Services Administration (GSA) as the contracting agency. The contract was posted on May 4, 2026, and it supports small businesses by restricting bidding to them, emphasizing both technical expertise and compliance with federal procurement guidelines.

General Automotive Repair

POSTED

DEADLINE

Collision Damage Repair – Structural Frame and BodyworkThe contract involves repairing structural frame damage, replacing body panels, and performing alignment on a 2019 INTERNATIONAL LT625 commercial truck. It is designated as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses are eligible to bid. The work falls under NAICS code 811121, which relates to automotive body, paint, and interior repair and maintenance services. The contracting agency is the General Services Administration (GSA), specifically the GSA/FAS/TTL/QMD/AMC office. The place of performance is in Clarksville, zip code 37043. The contract was posted on May 4, 2026, and focuses on collision damage repair, targeting essential structural and bodywork to restore the vehicle’s functionality and safety.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS