Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Quality Inspection and Compliance Documentation

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves performing final inspections, documenting repairs, and ensuring that vehicles comply with federal motor vehicle safety standards before delivery. It is a subcontract awarded under a total small business set-aside in accordance with FAR 19.5, emphasizing opportunities for small businesses. The work falls under NAICS code 541380, which pertains to testing laboratories. The contract is managed by the General Services Administration, specifically through the GSA/FAS/TTL/QMD/AMC office, with the place of performance located in Clarksville, ZIP code 37043. The scope highlights quality assurance and compliance documentation to verify that all safety standards are met, thereby ensuring vehicles are safe and ready for delivery to the end users.

General Info

Perform final vehicle inspections, document repairs, ensure safety compliance, subcontract for small businesses.

Agency

General Services Administration → Gsa/fas/ttl/qmd/amcView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Clarksville, TN, 37043, USA

Set-Aside

SBA

Documents

This scope was carved out of 266FFAMC1.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Repair collision damage to 2019 INTERNATIONAL LT625

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Gsa/fas/ttl/qmd/amc
ContactsNo contacts available
OfficeN/A
Organization / Agency
General Services Administration → Gsa/fas/ttl/qmd/amc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform final inspection, document repairs, and ensure compliance with federal motor vehicle safety standards prior to delivery.

Similar Contracts

Same NAICS industry code

NAICS: 541380
New
Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA
Solicitation # CIP 5661
Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project, identified as CIP 5661. The project is funded through a U.S. Environmental Protection Agency Community Grant and is estimated to span approximately 210 construction working days. The selected subconsultant will be responsible for geotechnical and materials inspection and testing services, including initial sampling and acceptance testing of proposed materials, as well as ongoing material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. The contract requires strict adherence to federal and state regulations, including EPA Disadvantaged Business Enterprise requirements under 40 CFR Part 33, the Build America, Buy America Act, and California prevailing wage laws. Subcontractors must be registered with the Department of Industrial Relations and comply with the California Levine Act regarding campaign contribution disclosures. The award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, a fee proposal based on lump sum, unit price, and hourly rates, and documentation of their small or disadvantaged business certifications.
Albert A. Webb Associates

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services, managed by the Department of Defense ASC Commodities Division, involves performing specialized testing and validation on production lots of cable assemblies for prime contractors on DLA Aviation projects. The scope of work requires executing tests to verify electrical continuity, signal integrity, and physical tolerances according to NSN 6150-01-091-6485, utilizing equipment such as multimeters, oscilloscopes, or automated cable testers to deliver certified test reports. The project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the attribute and variable inspection of 24 manufactured ground rods for prime contractors under the ASC Supplier Oper AE and AF Div. The scope of work requires the execution of inspection plans based on MIL-STD-1916 to verify that material properties and dimensions align with the Technical Data Package. The contractor will utilize precision metrology tools, including calipers and micrometers, to perform these evaluations. Final deliverables include detailed inspection reports and certifications of compliance. The performance of these services is located in Cherry Point, and the project falls under NAICS code 541380.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Testing and Certification Services (PLT)This subcontract for Quality Testing and Certification Services focuses on performing Production Lot Testing for prime contractors delivering DLA supply contracts. The selected provider will utilize metrology and testing equipment to measure actual results against the tolerances specified in the technical data package, ensuring all deliverables meet the required standards. The scope of work includes generating formal test reports and process certifications acceptable to the DLA, with a final delivery of certified reports detailing actual results and tolerances. This requirement is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB, Utah.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) for Conduit AssembliesThis subcontract involves performing First Article Testing for conduit assemblies to support prime contractors delivering DLA Aviation supply contracts. The primary objective is to conduct testing on the first production unit of NSN 5975-01-532-0286 to ensure full compliance with technical specifications, material integrity, and dimensional accuracy. Using precision measurement equipment to validate NSN data, the provider will deliver a formal FAT Report and an approved first article sample. The project is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 541380, the opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) Coordination and ExecutionThis subcontract for the Department of Defense ASC Commodities Division involves the coordination and execution of First Article Testing to support prime contractors delivering DLA supply contracts. The primary objective is to validate manufacturing processes and product specifications by verifying material properties, dimensions, and quality standards. This technical validation is performed using specialized metrology and inspection equipment, including micrometers and Coordinate Measuring Machines. The selected provider is responsible for submitting detailed test results for government approval and delivering the final FAT Report along with approved first-article samples. The work is designated under NAICS code 541380 and will be performed in Texarkana, Texas. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports prime contractors on Defense Logistics Agency projects. The selected provider will perform specialized attribute or variable inspections according to MIL-STD-1916 and validate material properties and dimensions against 98897 series drawings. The primary deliverables include certified test reports and validated First Article units. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Due to the handling of export-controlled technical data, the provider must maintain ITAR registration and CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline of September 30, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
International
Independent Testing AgencyThe City of Pickering is seeking a subcontracted Independent Testing Agency to perform independent inspection and testing of installed electrical systems for prime contractors on various facility projects. The selected provider will utilize specialized electrical testing and diagnostic equipment to verify installations and must hold independent third-party certification to ensure compliance and quality. The primary responsibility of the contractor is to deliver formal inspection and final test reports to both the City and the prime contractor. This opportunity was posted on September 22, 2026, with a response deadline of October 14, 2026.
City of Pickering

POSTED

about 15 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
International
Geotechnical and Construction Material Testing
City of Grande Prairie

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541380
New
Federal
NDT Inspection Services (UT/VT)This subcontract for NDT Inspection Services involves performing non-destructive testing for prime contractors on IMF vessel projects at the Puget Sound Naval Shipyard. The scope of work requires conducting ultrasonic thickness measurements at 700 specific sites across the underwater body, hull, and freeboard, as well as visual inspections of the hull, freeboard, and all three decks. All testing must be performed using ultrasonic thickness gauges and visual inspection tools in accordance with ASTM weld inspection standards. The successful contractor is responsible for delivering documented UT/VT inspection reports as specified in CDRL A032. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.
Puget Sound Naval Shipyard IMF

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
Federal
LPM Testing and Validation ServicesThe LPM Testing and Validation Services subcontract, issued by Navsea HQ under the Department of Defense, involves the technical testing and evaluation of LPMs for prime contractors on submarine projects. The scope of work includes executing the Type 20 and Type 24 Test Requirements Matrix and validating Classified Annex requirements through the use of environmental and pressure testing chambers. To fulfill these requirements, the contractor must maintain a SECRET Facility Clearance and ensure full compliance with NISPOM standards. The primary deliverables for this engagement are the submission of detailed test reports and official validation certificates. This opportunity falls under NAICS code 541380, with a response deadline of October 20, 2026.
Navsea Hq

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541380
New
Federal
First Article Testing (FAT) and Validation ServicesThis small business set-aside subcontract for DLA Land Warren involves providing First Article Testing and Validation Services for a single unit of manufactured hardware. The contractor is responsible for executing technical tests according to the Technical Data Package and MIL-STD 1916 sampling standards, while coordinating with DCMA for final inspection and acceptance. The primary deliverables include one validated test unit and a completed First Article Test Report. To qualify for this engagement, the provider must maintain US/Canada Joint Certification Program status and ensure full compliance with CMMC and NIST SP 800-171 standards for the secure handling of technical data. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026, under NAICS code 541380.
DLA Land Warren

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from General Services Administration → Gsa/fas/ttl/qmd/amc

Same awarding agency

NAICS: 444110
Federal
Vehicle Body and Structural Component SupplyThis subcontract opportunity with the General Services Administration involves the supply of automotive parts for prime contractors working on GSA vehicle repair projects. The selected provider will be responsible for sourcing and delivering OEM or approved equivalent body panels, structural frame components, and vehicle lighting units, ensuring all required itemized parts are provided with detailed pricing. The contract is designated as a Total Small Business Set Aside under NAICS code 444110 and will be performed in Houston, Texas. Interested parties must respond by September 29, 2026, following the posting date of September 14, 2026.
Home Centers

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 811121
Federal
Vehicle Body and Frame Repair ServicesThe General Services Administration is seeking a small business subcontractor to provide vehicle body and frame repair services in Houston, Texas. The contractor will be responsible for performing comprehensive body damage repairs, straightening frames, and restoring structural components and lighting systems using specialized frame alignment equipment and replacement panels to ensure vehicles meet all operational and safety standards. This subcontract opportunity is designated as a total Small Business Set Aside under NAICS code 811121. Interested parties must submit their responses by September 29, 2026, to support prime contractors on GSA vehicle repair projects.
Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 811111
Federal
Repair collision damage to 2023 Dodge Durango Pursuit
Solicitation # 266FFAMC09
The General Services Administration (GSA) has issued solicitation 266FFAMC09 for the repair of collision and mechanical damage to a 2023 Dodge Durango Pursuit following a traffic accident. The scope of work requires a complete repair of the vehicle body, frame, lights, and structural components to return the unit to full service. This is a small business set-aside under NAICS codes 811111 or 811121, and the contract will be awarded to the lowest price technically acceptable (LPTA) offeror. The place of performance is located in Houston, Texas, and interested vendors are required to physically inspect the vehicle in person prior to submitting a quote, as no photographs will be provided. Vendors must comply with several strict regulatory and operational requirements, including adherence to industry standards, EPA and OSHA regulations, and local Department of Labor wage laws. All equipment must carry a manufacturer's warranty, and all repairs must include a standard warranty. Additionally, contractors must maintain valid business licenses, possess adequate insurance to cover GSA vehicles in their shop, and ensure MSDS documentation is available on-site. Quotes must be itemized and detailed, including individual parts prices, labor times, paint labor, and estimated delivery timelines. All offerors must be actively registered in the System for Award Management (SAM) and provide current representations and certifications. Payment will be processed via Government Purchase Card (Mastercard) once the vehicle has been delivered, inspected, and accepted.
General Automotive Repair

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 423120
Federal
Parts Supply – OEM and Aftermarket ComponentsThis contract pertains to the supply of both original equipment manufacturer (OEM) and aftermarket replacement parts, including essential vehicle components such as body panels, lights, mirrors, bumpers, and various mechanical parts necessary for repair purposes. It is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, ensuring the opportunity is reserved exclusively for small businesses. The contract falls under the North American Industry Classification System code 423120, which covers motor vehicle supplies and new parts merchant wholesalers. The contracting agency responsible for this procurement is the General Services Administration, specifically the GSA/FAS/TTL/QMD/AMC office. The performance location for the contract is identified as Clarksville, with the zip code 37043. Although the solicitation number and specific point of contact details are not provided, the contract was posted on May 4, 2026. This procurement supports the ongoing need for maintaining and repairing vehicles through reliable sourcing of critical replacement parts from qualified small business suppliers.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 811121
Federal
Paint and Refinishing ServicesThis contract involves providing paint and refinishing services specifically for commercial trucks, focusing on sanding, priming, painting, and clear-coating repaired body panels to ensure they match the original factory finish. It is categorized under the NAICS code 811121, which pertains to automotive body, paint, and interior repair shops. The contract is a Total Small Business Set-Aside under FAR 19.5, indicating that the opportunity is reserved exclusively for small businesses, supporting small business participation. The contract is issued by the General Services Administration (GSA), specifically through the GSA/FAS/TTL/QMD/AMC office. The work will be performed in Clarksville, with the zip code 37043, although full location details are limited. The solicitation was posted on May 4, 2026, and it is a subcontract opportunity. The absence of a solicitation number and point of contact suggests that interested parties should refer to the provided SAM.gov link to access the full solicitation and submission instructions.
Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 811198
Federal
Electrical and Electronic Systems RepairThis contract involves the repair or replacement of damaged electrical and electronic components on a commercial truck following a collision. The scope includes work on wiring harnesses, lighting systems, sensors, electronic control units (ECUs), and dashboard instrumentation to restore full operational functionality. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, specifically categorized within the NAICS code 811198, which pertains to automotive electrical repair services. The contracting agency is the General Services Administration, with the place of performance located in Clarksville, zip code 37043. The contract was posted on May 4, 2026, and falls under the purview of the GSA’s Federal Acquisition Service. This opportunity is tailored to support small business participation in government contracts for specialized repair work on commercial trucks, ensuring that damaged electrical systems are properly addressed to meet operational and safety standards.
All Other Automotive Repair and Maintenance

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 811111
Federal
Mechanical Systems Repair – Powertrain and DrivetrainThis contract focuses on diagnosing and repairing mechanical systems related to the powertrain and drivetrain of a 2019 INTERNATIONAL LT625 that has sustained damage in a collision. The scope of work includes engine, transmission, and differential repairs, ensuring that the vehicle's critical mechanical components are restored to proper working condition. The contract is a subcontract under a Total Small Business Set-Aside (FAR 19.5) and is classified under NAICS code 811111, which pertains to automotive mechanical and electrical repair and maintenance. The work will be performed in Clarksville, with the General Services Administration (GSA) as the contracting agency. The contract was posted on May 4, 2026, and it supports small businesses by restricting bidding to them, emphasizing both technical expertise and compliance with federal procurement guidelines.
General Automotive Repair

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 811121
Federal
Collision Damage Repair – Structural Frame and BodyworkThe contract involves repairing structural frame damage, replacing body panels, and performing alignment on a 2019 INTERNATIONAL LT625 commercial truck. It is designated as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses are eligible to bid. The work falls under NAICS code 811121, which relates to automotive body, paint, and interior repair and maintenance services. The contracting agency is the General Services Administration (GSA), specifically the GSA/FAS/TTL/QMD/AMC office. The place of performance is in Clarksville, zip code 37043. The contract was posted on May 4, 2026, and focuses on collision damage repair, targeting essential structural and bodywork to restore the vehicle’s functionality and safety.
Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

5 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS