Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Paving and Asphalt Work

Active

State & Local

Response Deadline08/18/2026, 06:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Paving and Asphalt Work involves the installation of asphalt pavement for roads, parking lots, and access drives, encompassing full base preparation and pavement striping to ensure completed surfaces meet required standards. Work must be performed in accordance with technical specifications for material quality, compaction, grading, and line marking, with all tasks tied to the NAICS code 237310 for Highway, Street, and Bridge Construction. The opportunity is structured as a subcontract under the South Carolina Department of Transportation, with responses due by August 18, 2026, at 6:30 PM Eastern Time, and the solicitation was posted on June 30, 2026. Performance location spans facilities under the jurisdiction of the South Carolina agency, though exact cities or zip codes are not specified. Bidders are expected to comply with all applicable state and federal regulations governing public works, material sourcing, safety protocols, and environmental considerations. The contract is not assigned a specific set-aside classification, and interested parties should access the full solicitation through the South Carolina Business Opportunities portal for detailed requirements and submission guidelines.

General Info

Paving and asphalt work for SC DOT roads, parking lots, and drives with striping, due August 18, 2026.

Agency

South Carolina → Department Of TransportationView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

SC, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 06:30:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencySouth Carolina → Department Of Transportation

ContactsNo contacts available

OfficeN/A

Organization / Agency

South Carolina → Department Of Transportation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of asphalt pavement for roads, parking lots, and access drives including base preparation and striping.

Similar Contracts

Same NAICS industry code

Triple 65 LF – 66” Aluminum Pipe with Headwalls - Ash Little River Road - SR1300 Pipe ReplacementThe North Carolina Department of Transportation is soliciting bids for the furnish, delivery, and assembly of a triple-barrel aluminum pipe culvert system measuring 65 linear feet with 66-inch diameter pipes, to be installed at Ash Little River Road on State Road 1300 as part of a bridge maintenance project in Brunswick County. The scope includes headwalls, wing walls, required welding, flanged joints, geogrid stabilization material, and on-site technical support, all tailored to meet the specific needs of the Division 3 Bridge Maintenance project. This solicitation is for a one-time Agency Specific Contract under solicitation number 54-JJ-PR37020, with bids due by August 3, 2026, and the request was posted on July 20, 2026. The place of performance is in North Carolina, and Jason James is the primary point of contact for the procurement.

Department of Transportation

POSTED

about 5 hours ago

DEADLINE

Cowarts Store Road & Hunters Ridge RoadThe contract concerns the widening and resurfacing of Cowarts Store Road and Hunters Ridge Road in Randolph County, Georgia, under solicitation number PE-77077-NONST-2026-000000007. The opportunity was posted on July 20, 2026, with responses due by August 7, 2026, at 7:00 PM Eastern Time. This solicitation is issued by the Randolph County government under the State and Local Government (SLED) category, with work to be performed exclusively within the state of Georgia. There is no set-aside designation specified, and no NAICS code is provided, indicating the procurement may not follow standard federal classifications. All performance will occur at the designated roadways in Randolph County, and inquiries should be directed to Taryn Roberson, the primary point of contact, via email at troberson@randolphcountyga.gov or phone at 229-732-6440. Further details and documentation can be accessed through the official Georgia procurement portal using the provided UI link.

Randolph County

POSTED

about 5 hours ago

DEADLINE

Fleet Fast EV Charging - ConstructionThe Port of Seattle through its Aviation Project Management Group is forecasting a contract for fleet fast electric vehicle charging infrastructure construction, categorized under NAICS code 237310 for electrical and other construction services. This initiative aims to support the deployment of high-speed EV charging systems tailored for fleet operations, likely targeting airport or port-related vehicle fleets to enhance sustainability and operational efficiency. The project is scheduled for release in 2026, with no set-aside type indicated, suggesting it is open to all qualified contractors. The place of performance and exact location details are not yet specified, but the work will be conducted within the Port of Seattle jurisdiction. Angela Peterson serves as the primary point of contact for inquiries, with Katie Techa designated as the project manager overseeing implementation. Prospective bidders should direct all communications to the provided email addresses and phone numbers. Although the solicitation number and formal timeline are not yet available, interested parties are encouraged to monitor the official portal for updates as the procurement process advances toward a formal Request for Proposal. The contract will involve the design, installation, and integration of fast-charging equipment capable of supporting multiple electric vehicles simultaneously, requiring technical expertise in electrical systems, energy management, and compliance with relevant industry standards.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project involves comprehensive upgrades to the entry and exit drives along 19th Ave W, the demolition of the remaining C-14 building slab, and the replacement of its footprint with a mix of new parking spaces and green areas designed as pollinator habitats, potentially incorporating a stormwater treatment facility. Existing pavement in poor condition will be milled and overlaid, while stormwater infrastructure will be fully replaced and expanded to divert runoff from combined sewers to dedicated storm lines, with water quality treatment integrated where qualifying pavement surfaces are replaced. A new irrigation system will support the landscaped areas, and native plantings will be added to the median within the entry drive. Electric vehicle charging stations will be installed in the new parking zone to support sustainable transportation. The project also includes the installation of a protected two-way bike lane linking the terminal entrance to the West Wall bike path, improved pedestrian connectivity to the intersection at 21st Ave W and W Emerson Pl, and enhanced access to the King County Metro bus stop. Lighting will be upgraded throughout the new parking area and connecting pedestrian and bicycle paths, and new wayfinding signage will be implemented to guide circulation. The work is being managed by the Port of Seattle through its Waterfront Project Management office, with primary contact information provided for project inquiries, and is classified under NAICS code 237310 for heavy and civil engineering construction, with a forecast posting date of July 20, 2026.

Waterfront Project Management

POSTED

about 5 hours ago

DEADLINE

Emerson St. Sinkhole RepairThe Emerson St. Sinkhole Repair project involves replacing a section of stormwater drain line that has become disconnected from the main King County sewer line beneath Emerson Street. Work includes excavation, removal of the damaged infrastructure, installation of a new pipeline, and establishing a secure connection to the main line, followed by backfilling and repaving of the asphalt surface. The project requires significant traffic management due to its location on a busy roadway, impacting multiple lanes and necessitating comprehensive controls to maintain safety and mobility during construction. The contract is forecasted by the Port of Seattle under the Waterfront Project Management division, with a NAICS code of 237310 for sewer and wastewater systems construction. Primary contact for inquiries is Marilynn Montenegro, reachable via phone and email, while Brandon Klett serves as the project manager. The solicitation was posted on July 20, 2026, and further details are available through the Port of Seattle’s online portal, though no set-aside classification or specific funding details are provided at this time.

Waterfront Project Management

POSTED

about 5 hours ago

DEADLINE

Asphalt Paving & Striping Portwide Unit Price 2026This contract covers a wide range of asphalt paving, sealing, and surface preparation services to be performed across multiple locations within the Seattle-Tacoma International Airport, maritime properties, and surrounding areas. Work includes installation of new asphalt paving and patching, asphalt overlays with fabric, crack sealing, seal coating, profile grinding, hauling and disposal of grinding spoils, removal and reapplication of pavement markings, concrete and asphalt saw cutting and coring for non-hazardous materials, installation of concrete wheel stops, repair and replacement of curbs, lifting and leveling of concrete sidewalks, and upgrades to road drainage systems, some of which may require permits. All tasks are intended to maintain and improve the condition of airport and port infrastructure. The contract is titled Asphalt Paving & Striping Portwide Unit Price 2026 and is classified as a forecast with a NAICS code of 237310. It is managed by the Port of Seattle through its Port Construction Services division, with primary contact Heather Bowden available via phone and email for inquiries, and Lesley Miles serving as the Project Manager. Although no solicitation number is provided, all details and further information can be accessed through the official Port of Seattle portal. Performance is expected at various sites throughout the port jurisdiction, and pricing will be based on unit rates for the specified tasks.

Port Construction Services

POSTED

about 5 hours ago

DEADLINE

Re-striping & Rumble Strips Various RoadsCrawford County, Georgia is soliciting sealed bids for the installation of roadway re-striping and rumble strips across approximately 27.40 miles of county roads. The project requires the contractor to provide all labor, materials, equipment, and traffic control measures necessary to complete the work in full compliance with Georgia Department of Transportation standards and all applicable state and local regulations. Bids must be submitted in sealed envelopes clearly labeled with the project title and received by 1:00 pm on Thursday, August 20, 2026, at the County Board of Commissioners office in Roberta, Georgia. Late bids will not be accepted, and all submissions must include the required Certificates of Insurance. The county reserves the right to reject any or all bids, waive minor irregularities, and award the contract based on what is deemed most beneficial to the county. Bid documents, including the list of roadways and detailed specifications, are available at the county office or online at www.crawfordcountyga.org. The solicitation number is PE-77725-NONST-2027-000000011, with Sharon Sanders listed as the primary point of contact for inquiries.

Crawford County

POSTED

about 6 hours ago

DEADLINE

in about 1 month

609193 NORTON FAP No. CRP/CMQ-0035(071)X Intersection Improvements at West Main Street (Route 123)The contract pertains to intersection improvements at West Main Street (Route 123) in Norton, Massachusetts, under Federal Aid Project No. CRP/CMQ-0035(071)X, with a solicitation number BD-27-1030-0H100-0H002-131515 and an estimated contract value of $2,601,000. The work is managed by the Massachusetts Department of Transportation (MassDOT), with the contracting office located in Park Plaza, Boston, and performance required at the designated project site. Bids must be submitted electronically through www.bidx.com, with no paper submissions accepted, and require a valid vendor code and Digital ID obtained at least 14 days prior to the September 9, 2026 deadline. Contractors must be pre-qualified in the HIGHWAY-CONSTRUCTION category by MassDOT and submit a bid guaranty equal to five percent of the total bid amount. The solicitation mandates compliance with federal and state regulations, including Executive Order 11246 for equal employment opportunity, Title VI and FHWA non-discrimination provisions, and Massachusetts prevailing wage laws. Price adjustments are built into the contract for key materials such as hot mix asphalt, Portland cement, diesel fuel, gasoline, and structural and reinforcing steel, based on published indices. All work must adhere to the Architectural Access Board regulations (521 CMR 1.00 et seq.) to ensure accessibility. No formal evaluation factors, award methodology, or line-item cost breakdowns are specified, though the procurement is governed by Massachusetts General Laws Chapter 30 § 39M. While the contract references several appendices incorporating federal compliance standards and special provisions, no detailed inspection procedures, packaging requirements, payment instructions, contract administration points of contact, or invoicing systems are outlined in the provided documentation.

0H100 - HIGHWAY

POSTED

about 6 hours ago

DEADLINE

in about 2 months

616286 CHESTERFIELD-HINSDALE-MIDDLEFIELD-PITTSFIELD Maintenance and Preservation of Municipal BridThe contract titled 616286 CHESTERFIELD-HINSDALE-MIDDLEFIELD-PITTSFIELD Maintenance and Preservation of Municipal Brid pertains to the maintenance and preservation of municipal bridges across four Massachusetts communities and is solicited under the reference number BD-27-1030-0H100-0H002-131513. It is issued by the Massachusetts Highway Department under the SLED organization type and is managed by the agency office located at Park Plaza in Boston, Massachusetts, with a zip code of 02116. The solicitation is open for responses until August 25, 2026, at 7:00 PM Eastern Time, with the primary point of contact being Alex Deng, designated as the Purchaser. It is explicitly required that bidders do not use COMMBUYS to submit proposals for this project despite the included link pointing to the platform. The place of performance is listed as Park Plaza, Boston, MA, indicating the administrative oversight location, though actual work is to be performed at the municipal bridge sites in Chesterfield, Hinsdale, Middlefield, and Pittsfield. No set-aside type or NAICS code is provided, suggesting the award may be open to all qualified contractors without specific small business or socioeconomic preferences. All interested parties must adhere to the non-COMMBUYS bidding instruction and direct inquiries to the designated point of contact.

0H100 - HIGHWAY

POSTED

about 7 hours ago

DEADLINE

in about 1 month

616282 ASHFIELD-CHARLEMONT-CONWAY-HAWLEY Maintenance and Preservation of Municipal Bridges at MultThe contract titled 616282 ASHFIELD-CHARLEMONT-CONWAY-HAWLEY Maintenance and Preservation of Municipal Bridges at Mult is issued by the Massachusetts Highway Agency under solicitation number BD-27-1030-0H100-0H002-131512, with a posted date of July 20, 2026, and a response deadline of August 25, 2026, at 7:00 PM Eastern Time. This solicitation is categorized under SLED state and local government procurement and concerns the maintenance and preservation of municipal bridges across the towns of Ashfield, Charlemont, Conway, and Hawley. Bidders are explicitly instructed not to use COMMBUYS to submit their proposals, despite the solicitation being accessible via a COMMBUYS link. The primary point of contact for inquiries is Alex Deng, designated as the Purchaser, and all official correspondence should be directed through standard procurement channels outside of the COMMBUYS platform. Performance of the work is anticipated to be carried out in the specified municipalities, with the contracting office located at Park Plaza in Boston, Massachusetts.

0H100 - HIGHWAY

POSTED

about 7 hours ago

DEADLINE

in about 1 month

610800 BARNSTABLE FAP No. CRP-003S(984)X Park and Ride Expansion and Improvements at Route 132The contract pertains to the Park and Ride Expansion and Improvements at Route 132 in Park Plaza, Boston, Massachusetts, with a stated project value of $8,007,000. It is a construction solicitation issued by the Massachusetts Department of Transportation under Agency Code 0H100 - HIGHWAY, utilizing Federal Aid Project No. CRP-003S(984)X. Bids must be submitted electronically through the www.bidx.com portal by Tuesday, August 18, 2026, at 2:00 P.M., with no paper submissions allowed, and bidders are explicitly instructed not to use COMMBUYS. Only pre-qualified highway contractors are eligible to respond, and all proposals require a bid bond or proposal guaranty equal to 5% of the total bid amount. Compliance with Massachusetts General Laws Chapter 30 § 39M governing prevailing wages and equal employment opportunity regulations under Executive Order 11246 and Title VI of the Civil Rights Act is mandatory, including adherence to minority and female workforce participation goals outlined in referenced appendices. Price adjustment provisions are included for key construction materials such as asphalt, cement, diesel, gasoline, and steel, with specific base prices referenced in external documentation. The place of performance is clearly designated as Park Plaza, Boston, MA 02116, and inspections are expected to occur on-site, though formal inspection criteria or acceptance procedures are not detailed in the available text. Contract administration is managed by the Massachusetts DOT contracting office in Boston, with no named Contracting Officer, Contracting Officer’s Representative, or Contracting Officer’s Technical Representative identified in the materials. While the solicitation references key compliance standards including FHWA regulations, the Massachusetts Architectural Access Board’s 521 CMR 1.00, and MassDOT Standard Specifications for Highway Construction, it does not include a formal section detailing evaluation factors for award, specific line-item pricing structures (CLINs/SLINs), packaging and marking requirements, or invoicing procedures. Documentation supporting the bid, including material price adjustment formulas and non-discrimination guidelines, is available via Document 00813 and related appendices, accessible only through the bidx.com platform. Offerors must obtain a MassDOT vendor code and a Digital ID to submit proposals, and while socioeconomic certifications or UEI/CAGE codes are not required, DBE participation targets are embedded in the contract’s compliance

0H100 - HIGHWAY

POSTED

about 7 hours ago

DEADLINE

BID No. 26-0083-5 Skidaway Road ImprovementsChatham County in Georgia is soliciting bids for the upgrade of infrastructure at the intersection of Skidaway Road, Norwood Ave, and Ferguson Ave, requiring the complete furnishing of materials, labor, and equipment for new traffic signals, turn lanes, sidewalks, and drainage enhancements. The project, identified as BID No. 26-0083-5 Skidaway Road Improvements under solicitation number PE-77548-NONST-2027-000000398, was posted on July 20, 2026, with responses due by August 17, 2026, at 7:00 PM. The work falls under a state-level government initiative, with no specific set-aside classification indicated, and all performance will occur within the designated intersection in Georgia. Primary point of contact for inquiries is Jean Fleming, reachable via email at ajfleming@chathamcounty.org or by phone at 912-790-1619, and additional details can be accessed through the official Georgia procurement portal linked in the solicitation.

POSTED

about 7 hours ago

DEADLINE

More opportunities from South Carolina → Department Of Transportation

Same awarding agency

Transportation and Delivery Logistics for Steel DeckingThe contract entails the transportation and delivery of galvanized steel bridge decking panels from the fabrication site to SCDOT District 3 in Simpsonville, South Carolina, with all deliveries required to adhere to strict windows specified by the agency. The work must be completed no later than December 30, 2026, demanding precise scheduling and logistics coordination to meet timeline constraints. The contractor is responsible for ensuring the safe and timely movement of these critical infrastructure components, with performance expectations centered on reliability, compliance with delivery schedules, and handling protocols that prevent damage to the panels. This is a subcontract under NAICS code 484220, indicating freight transportation and related services, sponsored by the South Carolina Department of Transportation. The solicitation was posted on July 17, 2026, with responses due by August 19, 2026, providing potential bidders a limited window to prepare and submit proposals. While no set-aside designation or specific point of contact is listed, the place of performance is clearly defined as Simpsonville, SC, and all activities must align with the state agency’s operational requirements. The contract’s success hinges on consistent adherence to timelines, proper documentation of deliveries, and the ability to maneuver within tight logistical parameters up to the final deadline.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Galvanizing of Steel Bridge Deck ComponentsThe contract entails the hot-dip galvanizing of fabricated steel bridge decking components to ensure compliance with ASTM A123/A123M standards, guaranteeing robust corrosion protection and long-term coating durability required for structural integrity in harsh environmental conditions. The work involves preparing and coating steel components with a zinc layer through hot-dip galvanizing, with strict adherence to mechanical and coating thickness specifications mandated by the standard to withstand outdoor exposure and heavy traffic loads typical of bridge infrastructure. This subcontract is issued by the South Carolina office of the Department of Transportation, with a response deadline of August 19, 2026, and was posted on July 17, 2026. The North American Industry Classification System code 332999 indicates it falls under Other Miscellaneous Fabricated Metal Product Manufacturing, emphasizing specialized fabrication and coating services. The place of performance is not specified, but the work will support South Carolina's transportation infrastructure projects. Interested parties must submit proposals through the designated state procurement portal before the deadline to qualify for consideration, with no set-aside provisions mentioned for small or disadvantaged businesses.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Fabrication of Open Grid Steel Bridge DeckingThe contract requires the fabrication of open grid steel bridge decking panels using A709 Grade 50 steel, ensuring structural integrity and durability for transportation infrastructure applications. The panels must be galvanized in accordance with ASTM A123/A123M standards to provide corrosion resistance, and feature serrated tops to enhance traction and safety for vehicles and personnel. The design must be compatible with rail car configurations, utilizing self-threading bolts for secure and efficient assembly without requiring pre-tapped holes or additional fastening hardware. All components must meet precise engineering specifications to ensure interoperability and long-term performance under heavy load and environmental exposure. The contract is classified as a subcontract under NAICS code 332312, which pertains to fabricated metal product manufacturing, and is being issued by the South Carolina office of the Department of Transportation. Responses must be submitted by August 19, 2026, at 6:30 PM Eastern Time, following the posting date of July 17, 2026. The place of performance and point of contact details are not specified, but the solicitation can be accessed via the South Carolina Business Opportunity portal. No set-aside provisions are indicated, meaning the opportunity is open to all qualified contractors regardless of size or ownership status.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

OPEN GRID DECK D3 BRIDGE MAINTENANCEThe South Carolina Department of Transportation is soliciting sealed bids for the furnishing and delivery of Open Grid Steel Bridge Decking to be used in bridge maintenance operations, with all deliveries required to be made to its facility at 1025 Old Stage Road, Simpsonville, South Carolina. The solicitation, numbered 5400029980, is set to close on August 19, 2026, and is structured as a Firm Fixed Price contract with lowest price as the primary award criterion under a Lowest Price Technically Acceptable framework. Offerors must deliver 1,200 square feet of steel grid decking fabricated from A709 Grade 50 steel with serrated 1/8-inch tops, galvanized per ASTM A123/A123M, and connected using self-threading bolts in compliance with AASHTO LRFD standards for HS25/EV3 loading and a maximum deflection of L/800. All panels must be compatible with rail car transport, and no field welding to rail cars is permitted. Shop drawings must be submitted within 20 days of award, and deliveries must be completed by December 30, 2026, during designated hours on weekdays. The contract includes a 4-month initial term with automatic renewal provisions subject to 30-day advance notice by the state, and pricing remains fixed throughout the contract lifecycle, with potential adjustments limited to the Producer Price Index after the initial term. Compliance requirements include adherence to state-specific clauses covering fixed pricing, tax obligations, termination due to fund unavailability, survival of obligations, open trade, organizational conflicts of interest, price adjustments, and no indemnity or defense provisions. Bidders must submit certifications regarding debarment status, conflict of interest, previous contract terminations, drug-free workplace compliance, ethics, and independent price determination. While UEI and CAGE codes are not required, contractors must provide their legal name, state of incorporation, and State Vendor Number. Inspection and acceptance occur at the delivery site, with the state retaining authority to inspect both delivered materials and the contractor’s facility. Materials must meet ASTM, AWS D1.5, and AISC Quality Certification standards, with all welds requiring a neat, workmanlike appearance free of porosity or undercutting. Submissions must be made electronically via SCEIS or by hard copy to the specified Columbia addresses by the deadline, with only required documents accepted and confidential information properly marked for red

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Quality Assurance and Compliance for Rebar MaterialsAll rebar products supplied under this contract must fully comply with South Carolina Department of Transportation standards, requiring rigorous material testing, formal certification, and complete traceability documentation to verify compliance at every stage of production and delivery. The subcontract demands strict adherence to quality assurance protocols to ensure that rebar meets structural and safety requirements for state infrastructure projects, with documentation trails linking each batch to its origin, testing results, and certification authorities. The solicitation is open for responses until August 20, 2026, and falls under NAICS code 541330, indicating it pertains to architectural, engineering, and related services focused on technical compliance and material verification. The contract is issued by the South Carolina Department of Transportation and applies to rebar used in transportation infrastructure projects within the state, though specific performance locations are not outlined. Participation requires the ability to provide verified documentation and testing records that align with SCDOT protocols, and bidders must demonstrate the necessary systems and expertise to maintain material integrity and regulatory compliance throughout the supply chain.

Engineering Services

POSTED

DEADLINE

in about 1 month

On-Call Delivery and Logistics Services for Reinforcing MaterialsThe contract calls for time-sensitive delivery of rebar and pile wraps to the South Carolina Department of Transportation’s Columbia facility under a subcontract arrangement, with all deliveries required to be completed within 30 days of award and limited to Monday through Thursday only, excluding weekends and Fridays. The service is classified under NAICS code 484220, indicating it falls under truck transportation of freight, and the vendor must be prepared to respond quickly to urgent material needs without a fixed delivery schedule. The solicitation was posted on July 15, 2026, with responses due by August 20, 2026, and the work is to be performed at an unspecified location within South Carolina, though the primary point of delivery is the Columbia facility. Participation is open to all eligible subcontractors, with no specific set-aside designation, and all logistics must align with the agency’s operational timeline and material handling protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Supply of Reinforcing Steel Pile Wraps (e.g., A0401, A0501, A0503, A0901)The contract requires the fabrication and supply of pre-fabricated pile wraps intended for bridge foundation and structural repair applications, strictly adhering to South Carolina Department of Transportation design specifications and CLIN requirements. These wraps, identified by specific part numbers such as A0401, A0501, A0503, and A0901, are reinforcing steel components critical to enhancing the durability and load-bearing capacity of existing structural elements. The work falls under NAICS code 332312, indicating it pertains to forged and stamped metal product manufacturing, and is classified as a subcontract opportunity issued by the South Carolina Department of Transportation. All deliverables must meet exacting quality and performance standards to ensure compatibility with state infrastructure rehabilitation protocols. The solicitation was posted on July 15, 2026, with a firm response deadline of August 20, 2026, at 6:30 PM. While details such as the specific city or state for performance location and point of contact information are not provided, the contract is active through the South Carolina state procurement portal, accessible via the provided UI link. Interested parties must ensure full compliance with technical specifications, material certifications, and delivery timelines to qualify for award. No set-aside program or organization type preference is indicated, making this opportunity open to all eligible subcontractors capable of meeting the stated engineering and manufacturing criteria.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Supply of #4, #5, and #8 Reinforcing Steel BarsThe contract seeks the supply of new reinforcing steel bars compliant with ASTM A615/A706 standards in sizes #4, #5, and #8 to support on-call bridge maintenance projects under the South Carolina Department of Transportation. These materials are essential for structural repairs and upgrades and must meet strict quality and manufacturing specifications to ensure durability and safety in transportation infrastructure applications. The work is classified as a subcontract with a NAICS code of 332311, indicating focus on forging and stamping operations related to metal products. Responses are due by August 20, 2026, and the solicitation was posted on July 15, 2026, allowing potential suppliers approximately five weeks to prepare and submit proposals. The place of performance and office address details are unspecified, but the work is tied to infrastructure needs within South Carolina. Interested parties should submit bids through the provided online portal by the deadline to be considered for award, with no set-aside provisions indicated for small businesses or other categories.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

in about 1 month

D1 Bridge 2 Yr on Call Reinforcing SteelThe South Carolina Department of Transportation is soliciting offers for a two-year on-call contract to supply and deliver reinforcing steel bars to the District 1 Bridge Maintenance Unit in Columbia, SC. The contract, identified by solicitation number 5400030002, is open for bids until August 20, 2026, and will be awarded on a lowest price technically acceptable basis, with responsiveness and responsibility serving as mandatory threshold requirements. The base period spans one year from the notice of award, with an automatic one-year renewal option unless the state provides 30 days’ written notice of non-renewal, extending the total potential term to two years. Offerors must deliver specified reinforcing steel items, including pile wraps and bars in sizes #4, #5, and #8, within 30 days of purchase order issuance, Monday through Thursday only, to the designated delivery point at 1400 Shop Road, Columbia, SC. All materials must conform to Section 703 of the 2025 Standard Specifications for Highway Construction and meet QPL 60 requirements for reinforcing steel, with no used or refurbished items permitted. The contract is structured as a requirements-type agreement with estimated quantities listed, but unit pricing is to be submitted by bidders, resulting in no predetermined contract value. The solicitation mandates strict compliance with state-specific contractual clauses, including provisions for contract termination by either party, termination for convenience, shipping risk allocation, and prohibition of indemnity or defense obligations. Offerors must certify compliance with ethics policies, a drug-free workplace, and non-debarment status, with affirmative disclosures required for conflicts of interest or any change in eligibility. Organizational conflicts of interest must be disclosed both pre- and post-award, with mitigation plans required if identified. No federal acquisition regulation clauses are used; all provisions are governed by South Carolina’s internal numbering system and statutes, including Title 11, Chapter 35. Deliveries are F.O.B. destination, and payment will be made via electronic funds transfer upon receipt of properly dated invoices. The contracting officer has authority to modify delivery locations and manage the contract, with no designated contracting officer’s representative or technical representative named. No unique entity ID, CAGE code, or socioeconomic certifications are required, and packaging, marking, or preservation standards are not specified beyond item identification codes for tracking purposes. Proposals must be submitted electronically through the South Carolina Electronic Bid System or via sealed paper submission to the specified address, with no

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Heavy-Duty Asphalt Paver Rental (Track-Type)The contract seeks vendors to provide track-type, heavy-duty asphalt pavers for use in road construction and resurfacing projects within District 3 of the South Carolina Department of Transportation. Equipment must be available for rental on a daily, weekly, or monthly basis, with no specified term length, allowing flexibility to meet project timelines and demands. The NAICS code 238990 indicates this is for other heavy and civil engineering construction support services, affirming the specialized nature of the equipment and its role in infrastructure development. The solicitation is open for responses until August 4, 2026, with a posting date of July 1, 2026, indicating a timeline for vendor submissions and evaluations. This is classified as a subcontract, suggesting the equipment will support an existing larger contract or project managed by SCDOT, and the place of performance is limited to District 3, requiring vendors to ensure timely delivery and service within that geographic area. All equipment must meet heavy-duty operational standards suitable for state-level roadwork, and vendors are expected to handle maintenance, transportation, and readiness to deploy as needed.

All Other Specialty Trade Contractors

POSTED

DEADLINE

DISTRICT 3 ASPHALT PAVER RENTALThe State of South Carolina Department of Transportation, District 3, is soliciting bids for the rental of a heavy-duty track-type asphalt paver to support infrastructure projects in Greenville, Oconee, Pickens, and Spartanburg counties. The equipment will be operated by SCDOT personnel, and the rental agreement is intended to fulfill immediate operational needs on state-funded roadways. Bids must be submitted by August 4, 2026, at 6:30 p.m., with the solicitation posted on July 1, 2026, under solicitation number 5400029929. The procurement is managed under a state-level agency initiative and is not subject to small business set-asides. All correspondence and inquiries should be directed to Tamika Thomas, the primary point of contact, via email at thomasts@scdot.gov or by phone at 864-241-1010. The contract will be administered within South Carolina, with no specified physical address provided for the office or performance location beyond the state boundary.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Environmental Compliance and MonitoringThe contract involves comprehensive environmental compliance and monitoring services for construction projects under the South Carolina Department of Transportation, focusing specifically on stormwater management, erosion control inspections, and regulatory reporting. The work requires ongoing field assessments to ensure adherence to environmental standards during construction phases, including the implementation and verification of best management practices to prevent sediment runoff and water contamination. All activities must align with applicable state and federal environmental regulations, with detailed documentation and timely submission of compliance reports to maintain regulatory approval and avoid penalties. Subcontractors are expected to possess expertise in environmental monitoring and construction site compliance, with the ability to respond promptly to changing site conditions and inspection requirements. The solicitation is open for responses until August 18, 2026, and is classified under NAICS code 541620, which pertains to environmental consulting services. Performance will occur across various construction sites within South Carolina, though specific locations are not detailed, and the work is structured as a subcontract under the broader DOT initiative. Contractors must be prepared to deliver consistent, high-quality data and inspections to support the agency’s commitment to environmental stewardship during infrastructure development.

Environmental Consulting Services

POSTED

DEADLINE