Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Penetrator Assembly Manufacturing

Active

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Penetrator Assembly Manufacturing, involves the primary fabrication and final assembly of Hull Penetrator Assemblies for US Navy shipboard projects. The contractor is responsible for fabricating assemblies according to technical drawings, integrating components, and implementing Special Control Procedures for Level I Scope of Certification. Additionally, the contractor must manage Electronic Contractor Data Submission for all data and waivers while ensuring strict compliance with the Buy American Act and Higher-Level Quality Requirement 52-246-11. Managed by the Department of the Navy under the Navsup Weapon Systems Support Mech agency, the work is performed in Mechanicsburg. The project is categorized under NAICS code 336612 and is designated as an SBA set-aside. The ultimate objective of the contract is the successful delivery of completed Hull Penetrator Assemblies to prime contractors.

General Info

Contract for fabricating and assembling US Navy Hull Penetrator Assemblies in Mechanicsburg.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

336612 - Boat Building

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

SBA

Documents

This scope was carved out of N0010426QFF55.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PENETRATOR ASSY — 5935016338496 — N0010426QFF55

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs primary fabrication and final assembly of Hull Penetrator Assemblies for prime contractors on US Navy shipboard projects. Fabricates assemblies per technical drawings, integrates components, and implements Special Control Procedures for Level I Scope of Certification. Manages Electronic Contractor Data Submission (ECDS) for data and waivers. Complies with Higher-Level Quality Requirement 52-246-11 and Buy American Act. Delivers completed Hull Penetrator Assembly.

Similar Contracts

Same NAICS industry code

USCG Response Boat Small Third Generation (RB-S III)

Solicitation # 70Z02326R93250001

The United States Coast Guard is soliciting proposals for the Response Boat Small Third Generation (RB-S III) program to recapitalize its aging fleet of 29-foot RB-S II platforms. This total small business set-aside acquisition is a commercial Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract utilizing a combination of Firm-Fixed-Price and Fixed Price with Economic Price Adjustment CLINs. The scope includes the design, production, testing, and delivery of up to 410 boats and associated purpose-built trailers, along with logistics support, technical documentation, and crew familiarization. The anticipated ordering period is ten years, consisting of a two-year base period and an eight-year option period. The procurement employs a two-phase competitive down-select process. In Phase I, the government will evaluate written proposals based on mission effectiveness, production and management, and price to select up to four IDIQ contractors. Each selected offeror will receive an initial delivery order to build one demonstrator boat and trailer. In Phase II, these contractors will participate in a 90-day in-water demonstration to evaluate performance. Following this independent evaluation, one contractor will be selected to receive all subsequent production delivery orders. Phase I proposals are due by 1400 Eastern Time on November 13, 2026, and must be submitted electronically via the DoD Secure Access File Exchange.

POSTED

DEADLINE

Supply of Fixed Height Work SurfacesThis subcontract involves the supply of 148 fixed-height work surfaces for prime contractors working on Department of National Defence projects at the Royal Canadian Armoured Corps School. All provided units must adhere to the technical specifications outlined in Annex A and the Category 2 Product Builder, and must be approved under the Workspaces Supply Arrangement E60PQ-140003. The contract requires the delivery of these compliant work surfaces to CFB Gagetown in New Brunswick, Canada. The solicitation was posted on October 16, 2026, with a response deadline of October 27, 2026.

Department of National Defence

POSTED

DEADLINE

Marine Support & Tug ServicesThis subcontract for Marine Support and Tug Services involves providing tugs, tenders, and support vessels to prime contractors operating on Port of Houston Authority marine projects. The scope of work includes the towing and positioning of dragging barges, the transport of personnel to floating plants, and the overall safe delivery and positioning of marine plant equipment within the Port of Houston. All operations must comply with the Vessel Bridge-to-Bridge Radiotelephone Act through the use of VHF-FM Radios. The opportunity is categorized under NAICS code 336612 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 28, 2026. This project is managed under the jurisdiction of the Port of Houston Authority in Texas.

Port of Houston Authority

POSTED

DEADLINE

Water Closet Parts Kit SupplierThis subcontract involves the supply of 36 specialized water closet parts kits, identified by NSN 4510-01-595-6822, for prime contractors working on projects at the DDSP New Cumberland Facility. The Department of Defense requires that all units strictly adhere to DLA Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001. The agreement stipulates that the 36 complete kits must be delivered FOB Origin within a timeframe of 167 days. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336612.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Fabrication of Honeycomb Core Joiner Metal DoorThis subcontract involves the manufacture and supply of one Marine Structural Metal Door intended for prime contractors supporting the DLA Weapons Support Fluid Handling Division for the USS Essex LHD 2. The contractor is responsible for fabricating a joiner metal door using honeycomb core construction in accordance with Part Number 804-4629248. The scope of work includes strict adherence to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking requirements. The final deliverable is one completed Marine Structural Metal Door delivered FOB Destination. This project falls under NAICS code 336612 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-27-T-1309

Solicitation SPE7M4-27-T-1309 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine structural metal door, identified by NSN 2040015961252. The requirement specifies that part number 804-4629248, a honeycomb core joiner metal door, supersedes part number 804-5959320. The item is a critical application item and must adhere to specific technical and quality requirements, including the prohibition of intentionally added mercury and compliance with the DLA Master List of Technical and Quality Requirements. The contract is a fixed-price acquisition with delivery required within 20 days after the order is placed, with an original required delivery date of October 9, 2026. Delivery is FOB Destination to the USS Essex LHD 2. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA packaging requirements. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Evaluation may include a price preference for certified HUBZone small businesses, and the buy is identified as a potential candidate for automated award. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Potable and Non-Potable Water Fittings SupplyThis subcontract agreement involves the supply of brass inserts, couplings, and cast iron valve boxes for prime contractors working on City of Tacoma water warehouse projects. The scope of work specifically includes the delivery of 1 inch Brass MIPT to Ribbed inserts and 1-1/2 inch Galvanized couplings. Strict quality standards are required for all materials, with potable items needing to comply with ANSI/AWWA C800 and NSF/ANSI 372 standards and be marked NL. Non-potable items must meet AWWA/ANSI C800 specifications. The solicitation was posted on October 14, 2026, with a response deadline of October 23, 2026.

POSTED

DEADLINE

ADAPTER ASSEMBLY,DR — 2010011997749 — N0010426QJC52

Solicitation # N0010426QJC52

Solicitation N00104-26-Q-JC52, issued by the Navsup Weapon Systems Support Mech, is a request for quotations for the teardown, evaluation, repair, and modification of one Adapter Assembly, DR (NSN 2010-01-199-7749). The contractor is required to perform all work in accordance with standard repair and overhaul practices, technical orders, and approved drawings. Key performance requirements include a Repair Turnaround Time of 50 days from the date of asset receipt to acceptance, with an induction period covering one year from the date of the order. All freight is handled as FOB Origin. The contractor maintains primary responsibility for inspection and quality assurance, with the requirement to keep all inspection records available for 365 days following final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and ASTM D3951-18 for CONUS shipments. Award consideration is limited to authorized distributors of the original manufacturer. Evaluation of offers will be conducted using the Supplier Performance Risk System to assess price and supplier risk. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Sleeve Bearing Manufacturing/SupplyThis subcontract involves the manufacture and supply of six precision sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced or procured in strict accordance with Electric Boat Corporation part number 2642-343-13 and NSN 3120012155203, ensuring full adherence to configuration control items and the DLA Master List of Technical and Quality Requirements. The contractor is required to maintain NIST SP 800-171 compliance and follow all Buy American Act regulations. Final delivery of the bearings is designated as FOB Origin to Tracy, California. This opportunity falls under NAICS code 336612 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONTROL HEAD, DUAL MAST

Solicitation # SPE7M0-27-Q-0109

Solicitation SPE7M0-27-Q-0109 is a firm fixed price emergency procurement issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one Dual Master Control Head, identified by NSN 2010-01-541-1486. This is designated as a priority 01 urgent and compelling emergency requirement, with the government evaluating awards based on price, past performance, and the ability to provide the fastest possible delivery. The item is to be delivered to the USS PATRIOT MCM 7 at FPO AP 96675, with a required delivery date of September 3, 2026, and a general delivery window of 30 days after order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses covering cybersecurity, whistleblower rights, and antiterrorism awareness. The solicitation is categorized under NAICS code 336612 and requires offerors to maintain active registration in the System for Award Management.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

WDFW FLAT BOTTOM BOAT

Solicitation # 28467

The Washington Department of Fish and Wildlife is soliciting bids for the procurement of one new and unused flat bottom boat and accompanying trailer. This solicitation, identified by number 28467 and customer reference PF260445MZ, seeks a vendor capable of providing the specified marine equipment to meet the agency's operational needs. Interested parties must submit their responses by the deadline of October 27, 2026, at 7:00 AM. The primary point of contact for this procurement is Michael Zessin, and further details regarding the bid opportunity can be accessed through the official OMWBE portal.

POSTED

DEADLINE

Boat Trailer ProcurementThis small business set-aside subcontract through the Southwest Regional Maintenance Center involves the procurement of specialized RIB boat trailers for prime contractors working on marine projects. The scope of work requires the supply of FE Trailer Model M7000 7m units equipped with surge disc brakes and Boat Master P/N WM111M-240 11m units featuring aluminum I-Beams, 8,000lb torsion axles, and 316 SS calipers. The contract mandates the delivery of two new boat trailers within the first 10 percent of the contract period. Performance will take place in the 92136 zip code area under NAICS code 336612, with a response deadline set for October 20, 2026.

Southwest Regional Maintenance Center

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

BALL KIT, CERAMIC — 4820016188385 — N0010426QFD00

Solicitation # N0010426QFD00

This solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg is for the teardown, evaluation, repair, and modification of a Ceramic Ball Kit (NSN 4820-01-618-8385). The material is designated as Special Emphasis Level I, Scope of Certification, or Quality Assured because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The contractor must provide a single award based on a combination of technical acceptability and past performance, which is weighted as more important than price. Delivery is required within 30 days on a FOB Destination basis. Technical requirements mandate strict adherence to Naval Ship Systems Command drawings and specific material standards, including the use of centrifugally cast 6AL-4V or ASTM-B381 for balls and MC903 cast nylon for seats. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and ensure full traceability via Material Identification and Control codes. Key deliverables include a Certificate of Compliance and test certifications submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for wood packaging materials and item unique identification.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

SET SCREW — 5305014815095 — N0010427QBB20

Solicitation # N0010427QBB20

Solicitation NO0014-27-Q-BB20 is a Request for Quotations issued by NAVSUP Weapon Systems Support MECH for the procurement of set screws, identified by NSN 5305-01-481-5095. The government intends to award the contract to the responsible offeror providing the lowest priced, technically acceptable offer. Technical and quality requirements are governed by the Individual Repair Part Ordering Data, drawings, and military specifications available through the BPMI e-commerce website. In the event of a conflict, Section C of the contract takes precedence over Section D. The contractor is required to maintain a government-acceptable inspection system and submit all Reports of Test and Inspection electronically via the Wide Area Workflow platform. Strict adherence to packaging and marking standards is mandatory, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, with labels reflecting the nomenclature cited in the IRPOD. Any departures from product definitions require an approved Request for Variance, and the intentional use of mercury is prohibited. Delivery is expected within 180 days, with inspection and acceptance occurring at the origin.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

TRANSMITTER,PRESSUR — 6685014851288 — N0010426QUC50

Solicitation # N0010426QUC50

Solicitation NO0014-26-Q-UC50 is a request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture and procurement of a Pressure Transmitter, NSN 6685-01-485-1288. The required item must conform to the design represented by Cage Code 81349, reference number 89DSW60PSID3002, and must be produced by offerors whose products are approved for inclusion on Qualified Products List 24304. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 Rev N and IUID requirements under DFARS 252.211-7003. Packaging must comply with MIL-STD-2073, with specific levels for domestic and overseas shipments and specialized requirements for electrostatic discharge protection and oxygen cleaning. Inspection and acceptance will occur at the origin, though Government Source Inspection is required, and contractors must maintain inspection records for 365 days following final delivery. Deliverables are expected within 365 days, with a minimum procurement delivery lead time of 90 days. Offerors who are not the original equipment manufacturer must provide proof of authorized distributorship. Administrative requirements include electronic invoicing through the Wide Area Workflow system and registration in the System for Award Management. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and Buy American preferences.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

SEAL — 4320015028298 — N0010427QJA16

Solicitation # N0010427QJA16

Solicitation N0010427QJA16, issued by the Navsup Weapon Systems Support Mech, is a fixed-price request for quotations for the teardown, evaluation, and repair of a SEAL (NSN 4320-01-502-8298). The contractor is required to perform all work in accordance with approved repair standards, technical orders, and TDP Version 006, ensuring the final product meets all operational and functional requirements. A critical performance metric is the Repair Turnaround Time (RTAT) of 35 days, measured from the physical receipt of the asset to the date of acceptance. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The contract mandates strict quality assurance and packaging standards, including physical identification per MIL-STD-130 and preservation according to MIL-STD-2073-1 for OCONUS shipments or ASTM D3951-18 for CONUS shipments. Contractors are responsible for all inspections, though the government reserves the right to perform its own oversight. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, hazardous materials, and domestic preferences. Quotations are due by October 26, 2026, and must be submitted by authorized distributors of the original manufacturer.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

STEERING WHEEL — 2030013160764 — N0010427QJA19

Solicitation # N0010427QJA19

Solicitation N0010427QJA19 is a firm-fixed-price request for quotation issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the teardown, evaluation, repair, and modification of a steering wheel, identified by NSN 2030-01-316-0764. The contractor must ensure the repaired item meets the operational and functional requirements of CAGE Code 03956, Reference No. 1977616, utilizing original manufacturer specifications and drawings. A key performance requirement is a Repair Turnaround Time of 80 days from the physical receipt of the asset to the date of acceptance. Government Source Inspection is required, and acceptance will occur at the origin. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. All invoicing must be processed electronically via Wide Area Workflow. Evaluation of offerors will be conducted through the Supplier Performance Risk System, focusing on item and price risk. Prospective contractors must be authorized distributors of the original manufacturer and provide signed proof on company letterhead. Quotations must include total pricing and confirmed turnaround times, with a response deadline of November 02, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

PUMP UNIT,CTFGL — 4320015758318 — N0010427QJA17

Solicitation # N0010427QJA17

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the teardown, evaluation, repair, and modification of a Pump Unit, CTFGL (NIIN 015758318). The government requires a repair turnaround time of 35 days, measured from the date of asset return to the date of final acceptance. All repair work must adhere to the contractor's standard overhaul practices and approved technical directives, with physical identification and packaging complying with MIL-STD-130 and MIL-STD-2073, respectively. Government Source Inspection is mandatory, and final acceptance must be obtained within the established turnaround timeframe. The award will be made to a single, technically acceptable offeror determined to be most advantageous to the government, with past performance weighted as more important than price. Eligible respondents must be authorized distributors of the original manufacturer and provide proof of such status on company letterhead. The contract incorporates several critical federal regulations, including a DO priority rating for national defense, DFARS cybersecurity requirements for safeguarding covered defense information, and strict adherence to the Buy American and Trade Agreements certificates. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

HYDROGEN,REACTOR GR — 6830001805919 — N0010427QBB30

Solicitation # N0010427QBB30

Solicitation N0010427QBB30 is a fixed-price request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mechanicsburg, for the procurement of Hydrogen Reactor GR (NSN 6830-00-180-5919). The requirement is governed by Technical Data Package version 027 and mandates strict adherence to the Individual Repair Part Ordering Data (IRPOD) for quality assurance and inspection. A critical component of this contract is the requirement for production lot testing, with certified reports of test and inspection, including Form DD-1222, to be submitted to NAVSUP-WSS Code N9433 and samples delivered to Puget Sound Naval Shipyard. The contract emphasizes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, including specific requirements for Item Unique Identification (IUID) and Depot Level Repairable (DLR) labels. Because the material is hazardous, the contractor must provide Safety Data Sheets and GHS-compliant labels per FAR 52.223-3. Award will be granted to the responsible offeror with the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Inspection and acceptance are designated at the origin.

Industrial Gas Manufacturing

POSTED

DEADLINE

SPACER,SPECIAL SHAP — 5365014198911 — N0010427QBA04

Solicitation # N0010427QBA04

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is for the procurement of a Special Shape Spacer (NSN 5365-01-419-8911, Part Number 803-2177142-5XX-74) under a fixed-price contract. The award will be based on the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference granted to HUBZone small business concerns. Technical compliance is governed by Technical Data Package version 008 and drawing 803-2177142, with a strict prohibition on the intentional addition of mercury. The delivery timeline is set for 180 days, with terms established as FOB Destination. Contractors must adhere to rigorous quality assurance and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking and labeling. Items must be marked with the nomenclature SPACER and include the 13-digit contract order number and CLIN. A critical deliverable is the submission of a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. Inspection and acceptance will occur at the origin. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide CMMC unique identifiers in their proposal.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Critical Safety Item (CSI) Socket Head Cap ScrewsThis subcontract involves the supply of high-strength, certified socket head cap screws, identified by NIIN 016330288, for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The contractor is responsible for manufacturing or sourcing these critical safety items in strict accordance with TDP Version 002, ensuring full material traceability and the implementation of Special Emphasis Level I Scope of Certification. Compliance requirements include adherence to FAR 52.246-11 and mandatory registration in the ECDS system using a PKI Digital Certificate. All certified screws and accompanying Level I quality certifications must be delivered to the Portsmouth Naval Shipyard. The contract is managed under NAICS code 332722 with performance associated with the Mechanicsburg location.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Repair and Certification of External JA FittingsThis subcontract, titled Repair and Certification of External JA Fittings, is issued by the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project focuses on the repair and restoration of external JA fittings for prime contractors on US Navy projects, with performance taking place in Mechanicsburg. The scope of work involves the teardown, evaluation, and inspection of items to restore them to like new or A condition in strict accordance with restricted-access technical drawings. The contractor is responsible for utilizing precision machining and inspection tools to conduct Beyond Economic Repair and Beyond Repair analysis. The final deliverables for this contract include either certified repaired fittings or formal determinations that the items are beyond repair or beyond economic repair. The work is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of External JA Fittings (NIIN 014154757)This subcontract, managed by the Navsup Weapon Systems Support Mech for the Department of the Navy, involves the procurement of external JA fittings under NIIN 014154757. The selected provider is responsible for manufacturing or sourcing these fittings in strict accordance with restricted-access drawings and QPL 24403 standards. To ensure mission readiness and safety, all delivered hardware must achieve Quality Assured status and meet Special Emphasis Level I certification. The contract requires that all components be obtained through QPL-approved sourcing to maintain rigorous quality control. Performance for this requirement is centered in Mechanicsburg, Pennsylvania, with the primary objective being the delivery of physical hardware fittings to prime contractors supporting US Navy procurement projects.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Fluid Filter Head Manufacturer/SupplierThis subcontract involves the manufacture and supply of specialized Fluid Filter Heads, identified by NSN 4330-01-421-2626, for prime contractors supporting US Navy shipboard system projects. The Department of the Navy, specifically through Navsup Weapon Systems Support Mech in Mechanicsburg, requires the parts to be produced according to Special Emphasis material Level I Scope Of Certification. Key technical requirements include IUID marking in accordance with MIL-STD-130 and strict compliance with CSI standards and FAR 52.246-11. Each delivered filter head must be accompanied by a Special Emphasis Certificate of Conformance to verify that all quality and material specifications have been met.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS