Top

Personnel Transport Vehicles

Active

W911S226U3810Federal

Response Deadline07/30/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

336110 - Automobile and Light Duty Motor Vehicle ManufacturingView NAICS

Place of Performance

Fort Hood, Texas, NY, 76544

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 23

Combined Synopsis

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 10:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Frank Watts

contact@example.gov

+1 (555) 000-0000

Full Description

Four person personnel transport vehicles

Similar Contracts

Same NAICS industry code

NAICS: 336110

New

Federal

Sport Utility Vehicle (SUV)The U.S. Embassy Podgorica, part of the Department of State, is soliciting quotations for a Sport Utility Vehicle (SUV) under solicitation number PR16045774, with a NAICS code of 336110. The request is open to all responsible contractors without any set-aside restrictions, and the award will be made to the offeror providing the best value to the U.S. Government based on initial submissions, though discussions may occur if necessary. All quotations must be submitted electronically in Adobe PDF format to PodgoricaSolicitations@state.gov no later than 16:00 CEST on August 24th, 2026, and must be in English; incomplete submissions will be rejected. Questions regarding the solicitation must be submitted in writing and in English by 16:00 CEST on July 31st, 2026, and no inquiries will be accepted after this deadline. The point of contact for all correspondence is Karl Lohse and Dimitrije Vujovic, both reachable at the same email address. The vehicle is to be delivered for performance at Podgorica, Montenegro, with the issuing office located in Washington, D.C.

POSTED

DEADLINE

FY26 - DOEE-Toxic Substances DivisionThe contract forecasts the procurement of a vehicle funded by the FY23 Brownfield CWAGST Grant to support operations within the District of Columbia’s Department of Energy and Environment, specifically the Toxic Substances Division. The solicitation is scheduled for posting on July 23, 2026, indicating a multi-year planning cycle with the acquisition anticipated to occur in FY26. The vehicle is intended to facilitate environmental remediation and toxic substances management activities, aligning with grant objectives to enhance agency capacity for responding to contaminated site issues. Funding is restricted to the specified grant program, requiring strict compliance with grant usage guidelines, and performance is expected to occur within the District of Columbia, though no specific location is detailed. The procurement is not currently assigned a NAICS code, set-aside classification, or point of contact, suggesting preliminary planning status and that further details will be released closer to the solicitation date. Stakeholders should monitor the official portal for updates as the procurement process matures.

Energy and Environment (DOEE)

POSTED

DEADLINE

New Government VehiclesThe contract forecast titled New Government Vehicles is issued by the District of Columbia’s Parks and Recreation Department and was posted on July 23, 2026. It pertains to the acquisition of new government vehicles, though specific details such as the solicitation number,NAICS code, set-aside type, and point of contact are not provided. The place of performance and office address information are incomplete, indicating that further documentation will be required to determine exact delivery locations or administrative details. The forecast serves as an early notice to potential vendors and does not yet constitute a solicitation or binding procurement action, with the full scope of work expected to be outlined in a subsequent statement of work. Interested parties should monitor the official procurement portal for future updates and formal solicitation releases.

Parks and Recreation (DPR)

POSTED

DEADLINE

low speed Gasoline Powered microvan

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

POSTED

DEADLINE

MBE/WBE Subcontracting OpportunitiesSubcontracting opportunities are available across vehicle supply, upfitting, maintenance, and component supply with a strong preference for certified Minority and Women-Owned Business Enterprises. The opportunity is tied to the NAICS code 336110, indicating a focus on motor vehicle manufacturing, and the place of performance is located in Boston, Massachusetts, with a zip code of 02201. Interested parties must submit responses by the deadline of August 5, 2026, at 5:00 PM Eastern Time, with the solicitation posted on July 20, 2026. The contracting agency is listed as 143 - Procurement under the Massachusetts government, and while no formal set-aside designation is specified, the contract actively encourages participation from MBEs and WBEs. The full details and submission portal can be accessed through the provided Commbuys link.

POSTED

DEADLINE

Law Enforcement Vehicle Procurement and SupplyThe contract calls for the supply of new, fully compliant Pursuit Interceptor Marked vehicles to the Boston Police Department, ensuring all units meet stringent law enforcement standards for performance, safety, and equipment integration. The vehicles must be delivered with complete documentation, including title, registration, and compliance certifications, along with comprehensive warranty support to guarantee operational readiness and minimize downtime. All vehicles are to be configured specifically for the demands of urban patrol and emergency response, with necessary markings, lighting, communication systems, and reinforced components as required by departmental specifications. Delivery is expected to occur at the designated place of performance in Boston, with the contractor responsible for coordinating logistics to ensure timely and secure transport. The solicitation is open for responses through August 5, 2026, and falls under NAICS code 336110, classifying it as a motor vehicle manufacturing subcontract. While the agency name and contact details are not fully specified, the procurement is managed under Massachusetts’ 143 - Procurement office and is intended to support public safety operations within the city of Boston. Compliance with all state and federal regulations regarding vehicle manufacturing, emissions, and equipment standards is mandatory.

POSTED

DEADLINE

Pursuit Interceptor Marked (BPD)The City of Boston is soliciting sealed bids for the procurement of Pursuit Interceptor Marked vehicles for the Boston Police Department under solicitation number BD-27-1142-143-143-131290. The solicitation was posted on July 20, 2026, with a response deadline of August 5, 2026, at 5:00 PM Eastern Time. All bids must be submitted through the City of Boston Supplier Portal or via the official Commbuys link, and no paper submissions will be accepted. The vehicles are intended for use within Boston, Massachusetts, and performance of the contract will occur entirely within the city limits. The procurement is classified under a SLED agency type, indicating it is for State, Local, or Educational use, and is handled by the Procurement Office located in Boston. The primary point of contact for this solicitation is City Record Admin, reachable at 617-635-3422. Interested vendors are required to register and access the full bid documents through the City of Boston Supplier Portal, as all relevant technical specifications, terms, and submission guidelines are available electronically only. There is no designated set-aside program for this acquisition, meaning it is open to all qualified bidders without preference for small, minority, or women-owned businesses. Bidders must ensure compliance with all submission requirements and deadlines to be considered for award.

POSTED

DEADLINE

Pursuit Interceptor Hybrid Utility Unmarked (BPD)The City of Boston is soliciting sealed bids for the procurement of Pursuit Interceptor Hybrid Utility Unmarked vehicles intended for use by the Boston Police Department. The solicitation, identified as BD-27-1142-143-143-131293, was posted on July 20, 2026, with a response deadline of August 5, 2026, at 5:00 PM Eastern Time. Bidders must submit their proposals through the City of Boston Supplier Portal or by contacting Chris Radcliffe directly. The vehicles are to be delivered and performed within Boston, Massachusetts, with no set-aside provisions specified. The procurement is conducted under the SLED classification, indicating a state, local, or educational government agency, and the contracting authority is the Boston Procurement Office. All interested parties are directed to access detailed specifications and submission instructions via the official procurement portal using the provided solicitation number.

POSTED

DEADLINE

Half Ton Pickup Truck (BPD)The City of Boston is issuing a sealed bid solicitation for the procurement of a half-ton pickup truck under solicitation number BD-27-1142-143-143-131389, with the bid opportunity posted on July 20, 2026, and responses due by August 5, 2026, at 5:00 PM. This procurement is managed by the 143 - Procurement office within the Massachusetts state agency structure, and all bids must be submitted electronically through the City of Boston Supplier Portal. The vehicle is intended for use in Boston, Massachusetts, with the place of performance located in the city and zip code 02201. Interested parties must access the full solicitation details via the designated online portal or contact the primary point of contact, City Record Admin, at 617-635-3422 for additional information. No set-aside designation is specified, and the solicitation is open to all qualified suppliers meeting the stated requirements.

POSTED

DEADLINE

PR16078118 Purchase of a Bus (8 PAX)The U.S. Consulate General Frankfurt is seeking a firm fixed-price quotation for the purchase of a single 8-passenger bus, including the driver, to be delivered to its location in Frankfurt, Germany. The vehicle must fully comply with all applicable German and European Union standards and regulations. Bidders are required to quote a price that includes complete delivery to the consulate’s premises under DDP terms, meaning the seller assumes full responsibility for all logistics, customs clearance, duties, taxes, and final delivery, regardless of origin. VAT must be included at 19% for offers within Germany or at the seller’s domestic rate if originating from another EU country. The bus must be delivered no later than 120 days after the order is placed. Offers must be submitted via email to GSO Procurement at Einkauf@state.gov no later than 16:00 hours on Friday, 31 July 2026, with solicitation number PR16078118 clearly stated in the subject line. The U.S. Government intends to award the contract based solely on the initial proposals, without preliminary discussions, although it reserves the right to engage with qualified bidders if necessary. The solicitation is open to all responsible suppliers without set-aside restrictions, and the contract will be awarded to the offeror providing the best overall value. The NAICS code for this procurement is 336110, reflecting the vehicle manufacturing sector.

US Consulate Frankfurt

POSTED

DEADLINE

PR16077021 Purchase of 2 Compact VansThe U.S. Consulate General Frankfurt is seeking competitive offers for the purchase of two compact vans under solicitation number PR16077021, with all vehicles required to comply fully with German and EU technical and regulatory standards. The contract is a firm fixed price arrangement, and the quoted price must include delivery and value-added tax under DDP terms, meaning the seller is responsible for all costs, including customs clearance, transportation, and final delivery to the consulate’s premises in Frankfurt am Main. Vendors within Germany must quote a 19% VAT, while those from other EU member states must apply their domestic VAT rate. The vehicles must be delivered no later than 120 days after order placement. Interested parties must submit their proposals via email to GSO Procurement at einkauf@state.gov with the solicitation number clearly stated in the subject line, and all submissions are due no later than 16:00 hours on Friday, 31 July 2026. The U.S. Government will evaluate offers based on overall value, selecting the most responsible vendor with an acceptable proposal without preliminary discussions, though it reserves the right to engage in dialogue with candidates in the competitive range if necessary. The solicitation falls under NAICS code 336110 for motor vehicle manufacturing and does not involve any set-aside provisions, making it open to all qualified suppliers regardless of size or origin, provided they meet the stated delivery, compliance, and pricing requirements.

US Consulate Frankfurt

POSTED

5 days ago

DEADLINE

in 7 days

View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 333517

New

Federal

ToolsThe contract solicitation for a PROTO 1258 PIECE FOAMED MASTER TECHNICIAN MAINTENANCE SET includes a 66-inch 12-drawer workstation and a 10-drawer top chest, with an amendment modifying the original item and delivery date. The opportunity is issued under solicitation number W911S226U3651 and falls under the NAICS code 333517 for hand and edge tool manufacturing. It is designated as a Total Small Business Set-Aside, restricting participation to small businesses as defined by the SBA. The contracting office is the Department of Defense through W6QM Micc-Ft Drum, located at Fort Drum, NY, with performance expected to occur at a location with a zip code of 22211. The solicitation was posted on July 24, 2026, and responses are due by July 31, 2026, at 4:55 a.m. Eastern Time. Primary point of contact is Anthony Zyla, reachable via phone at 703-614-0476 or email at anthony.j.zyla.civ@army.mil, and further details are accessible through the SAM.gov portal.

Machine Tool Manufacturing

POSTED

DEADLINE

Airfield Lighting for Fort BraggThe contract titled Airfield Lighting for Fort Bragg with solicitation number W911S226U3812 is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5. It is classified under NAICS code 335139 which pertains to other lighting equipment manufacturing, indicating the procurement involves the supply, installation, or maintenance of specialized airfield lighting systems. The solicitation was posted on July 24, 2026, with a firm response deadline of July 30, 2026, at 2:45 PM ET, and is issued as a combined action indicating potential for both solicitation and award under a single process. The contracting activity originates from the Department of Defense under Office W6QM Micc-Ft Drum based in Fort Drum, NY, while the work is to be performed at Fort Bragg/Pope Army Airfield in North Carolina, with a ZIP code of 28308. Primary point of contact for this opportunity is Deanna Orona, reachable via phone at 910-396-7694 or email at Deanna.m.orona.civ@army.mil, who serves as the key liaison for questions or clarifications regarding the solicitation. The place of performance location is specified but does not include detailed city or state names beyond the ZIP code, emphasizing operational focus on the airfield infrastructure. Contractors interested in pursuing this opportunity must ensure they meet all small business eligibility criteria and submit proposals before the deadline to be considered for award. The full solicitation details and documents can be accessed through the official SAM.gov workspace link provided.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Electronic Scissor LiftThe contract calls for an electronic scissor lift branded as JLG or an equal model with part number ES1932, designed for both indoor and outdoor use with a 24V DC electric drive system for high efficiency. The unit must have a maximum width of 32 inches to navigate standard doorways and a stowed height of 78.2 inches, weighing no more than 3,450 lbs. It must achieve a platform height of at least 19 feet and support a minimum load capacity of 507 lbs, with an extendable deck offering at least 36 inches of additional outreach. The lift must accommodate two personnel indoors and one outdoors and be operable while fully elevated, with a minimum gradeability of 25 percent. Safety features include quickly folding rails equivalent to QuikFold, an active pothole protection system, and a load sensing system to enforce safe operational limits. The operator platform must include a built-in USB charger and a device holder for convenience. This is a total small business set-aside under NAICS code 333924, solicited by the U.S. Army at Fort Drum, New York, with responses due by July 31, 2026, and the contract was posted on July 24, 2026. Primary point of contact is Sarah Long, with secondary contact Mark Hill providing additional support.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

M1 and M2 Zinc SleeveThe contract titled M1 and M2 Zinc Sleeve is a combined solicitation issued under solicitation number W911S26U3733 by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is a Total Small Business Set-Aside as defined under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 332999, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The original response deadline was extended due to insufficient quotes received, with the new response deadline set for August 7, 2026, at 4:55 AM Eastern Time. The place of performance is listed with a zip code of 71602, though the city and state are unspecified. Amanda Heird serves as the primary point of contact for the solicitation, reachable via phone at 870-540-2935 or email at amanda.d.heird.civ@army.mil. The opportunity is accessible via the SAM.gov website for further details and submission.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Traumatic Brain Injury Modality

General Medical and Surgical Hospitals

POSTED

DEADLINE

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Railroad Track Materials

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Diamond Quality Door .70 EK706 1 meter x 2.12 meter, color black:Tech SpecsThe Diamond Quality Door .70 EK706 is a high-security steel door measuring 1 meter by 2.12 meters with a black finish, designed for maximum durability and intrusion resistance. Constructed from 100% steel with a 52kg steel frame, it features four reinforced steel hinges concealed with five screws and a single-key mechanism that enables a total security lockdown. The door is equipped with 20 security bolts and includes insulated and counter-acoustic interior materials for enhanced sound dampening and thermal efficiency. It comes with seven keys and is built with coded security features to ensure only authorized access. The door is coated with 100% steel solar protection paint to withstand environmental exposure and maintain structural integrity over time. This procurement is governed by solicitation number W911S226U3784, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, with a performance location in 32542. The opportunity is a total small business set-aside under NAICS code 423390 and is categorized as a combined contract type. Responses are due by July 31, 2026 at 10:30 PM Eastern Time, with the solicitation posted on July 22, 2026. All inquiries and submissions must be directed to the primary point of contact, Roberto AmaroPerez, reachable via email at roberto.amaroperez2.mil@army.mil or by phone at 253-967-8738. The full solicitation details can be accessed through the SAM.gov portal.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Inhibited transformer fluid

Petroleum Lubricating Oil and Grease Manufacturing

POSTED

DEADLINE

ECS 65 ForkliftsThe contract titled ECS 65 Forklifts is a total small business set-aside solicitation under the NAICS code 333924, exclusively reserved for small businesses as defined by the SBA. It was posted on July 22, 2026, with a firm response deadline of July 28, 2026, and is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The contract seeks the procurement of ECS 65 forklifts, with the place of performance designated as a zip code of 01434, though the specific city and state are not provided in the data. Guillermo Ramos serves as the primary point of contact, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 6095627558. This is a combined solicitation meaning it integrates both the solicitation and the contract award processes, and interested small businesses must respond before the deadline to be considered for award under the set-aside program.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Metal Tank (Heavy Gauge) Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days

View Details