Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-26-T-14MDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a quick release pin, part number BLC16R1.25S with NSN 5315-01-304-6935, under solicitation SPE4A6-26-T-14MD, with a required delivery of 13 units within 155 days. The item is classified as a critical application item and must comply with stringent technical and quality mandates referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in all phases of the product, preservation, packaging, and marking except for functional uses in specified equipment like batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-approved reagents, with portable devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Packaging must adhere to DLA’s RP001 requirements, with no special marking and palletization compliant with DLA standards. Delivery is FOB origin to the DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The supply must be delivered by April 5, 2026, to meet the original required delivery date of May 31, 2026, with no tolerance for quantity variance. All documentation and compliance are tied to the DLA acquisition framework and the unit of issue is established per official DoD guidance.

General Info

13 critical BLC16R1.25S pins, NSN 5315-01-304-6935, due April 5, 2026, FOB origin, zero defects, mercury-free, MIL-STD compliant.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14MD Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CAROLYN DAWSON-GREEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
AVIBANK MFG CO
NORTH HOLLYWOOD CA
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
AVIBANK MFG., INC. 84256 P/N BLC16R1.25S
SPE4A6-26-T-14MD
SECTION B
PR: 7014106107 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014106107 0001 EA 13.000
NSN/MATERIAL:5315013046935
DELIVERY (IN DAYS):0155
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-14MD
SECTION B
PR: 7014106107 PRLI: 0001 CONT’D
Need Ship Date:04/05/2026 Original Required Delivery Date:05/31/2026
SPE4A6-26-T-14MD NSN/Part Number: 5315-01-304-6935 Quantity: 13 EA Purchase Request: 7014106107QTY: 13 Delivery: 155 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK
Solicitation # SPE4A6-26-T-14PX
The contract pertains to the procurement of a commercial item identified as a PIN, LOCK with NSN 5315-01-611-2291 and part number 2WZV8, supplied by BEE INDUSTRIES and KAREN CARLISLE. The item is subject to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and the DLA Packaging Requirements for Procurement, with all items palletized according to RP001. The unit of issue is each, with a total quantity of 28 units, delivered FOB origin and inspected at destination. The delivery window is 162 days from the contract date, with a required ship date of January 27, 2027, and an original delivery deadline of February 4, 2027. No quantity variance is permitted. The item must be marked as specified under RQ017, and any non-accepted supplies must have government identification removed per RQ011. Documentation and source approval must meet RC001 requirements. Delivery is designated to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures follow DLAD Proc Note C19 and C20. The solicitation was issued under contract number SPE4A6-26-T-14PX, with a response deadline of August 17, 2026, and a unit price of $28.00 per unit, totaling $784.00.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-T-6173
The item is a tapered plain pin with NSN 5315-01-723-0297, ordered in a quantity of three units under purchase request 7017777811, with delivery required within 165 days after award. The solicitation number is SPE7M2-26-T-6173, posted on August 9, 2026, with responses due by August 20, 2026, and is issued by the Department of Defense’s Nuclear Reactor Program. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaires, and have received formal approval from DLA. Configuration changes must follow formal engineering change proposal procedures, and any deviations or waivers require formal variance requests. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is David Larsen at david.larsen@dla.mil.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-326U
The contract is for the procurement of 403 units of an O-RING with NSN/Part Number 5331-00-263-8033, under Purchase Request 7017234652QTY: 10635, with a delivery requirement of 165 days after award. The item must be free of asbestos, and any prior part numbers containing asbestos are no longer acceptable; alternatives require formal approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision based on the type of acquisition—simplified or large—defined by either the solicitation issue date, award date, or amendment date if applicable. Packaging must comply with DLA specifications, and all supplied items must have government identification removed if not accepted. The solicitation, numbered SPE7M4-26-T-326U, was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 332618. Performance is required at Robins AFB, Georgia, 31098-1887, with primary point of contact Steven Chomos at the Fluid Handling Division, Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14PS
The contract specifies the procurement of a shoulder-headed pin rivet with part number HST12YW14-16 and NSN 5320-01-714-2640, requiring a quantity of three units to be delivered FOB origin within 104 days of contract award. Inspection and acceptance are both conducted at the destination point, with zero tolerance for non-conformances enforced under a zero-based sampling plan aligning with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major classification, and while MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero defects unless otherwise stated. All technical and quality requirements referenced under R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standard including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement, with each unit packed per the contracted QUP. The items are to be shipped to DLA Distribution Cherry Point at Phantom Road, Building 147, Bay A, Cherry Point, NC, 28533-5040, with freight handled in accordance with DLAD Proc Notes C19 and C20. The original required delivery date is August 7, 2026, and the solicitation number is SPE4A6-26-T-14PS, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A7-26-T-633D
The contract SPE4A7-26-T-633D specifies the requirement for Production Lot Testing of 102 units with NSN/Part Number 0001S00000062, under a delivery timeline of 296 days from award. The contractor must execute and document comprehensive lot testing in accordance with the technical data package, including actual test results and specified tolerances, and submit a Production Lot Test Report clearly marked with the contract and lot numbers. This report must be presented to the Quality Assurance Representative for review and must be accompanied by signed DD Form 1222 and DD Form 250/iRAPT receiving reports, a copy of the contract or order, all applicable test reports, material and process certifications, process operation and inspection method sheets, and manufacturing drawings with appropriate markings to restrict public disclosure and limit government use as necessary. The solicitation, issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, was posted on August 9, 2026, with responses due by August 17, 2026, and performance is to occur at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is James Stearns, reachable via email and phone for contract-related inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-635C
The contract pertains to the procurement of one quick release pin with NSN 5315-01-555-7292 under solicitation SPE4A7-26-T-635C, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 243 days from award, with a response deadline of August 17, 2026, and the item is destined for performance at Tracy, California, with a zip code of 95304-5000. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. This item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and compliance with Cybersecurity Maturity Model Certification Level 2 through either self-assessment or certification by a C3PAO. Covered Defense Information applies, and the solicitation is governed by federal procurement regulations under NAICS code 332618.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-14JY
The contract pertains to the procurement of 5 straight-headed pins designated by NSN 5315-01-605-6677 and part number 347/10415 under solicitation SPE4A6-26-T-14JY, with a unit price of $5.00 per item and a total value of $25.00. Delivery is required within 20 days from the contract award date, with delivery terms set at FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, but must adhere to superseding DLA Master List of Technical and Quality Requirements. Packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The products are to be shipped by traceable means, prohibiting parcel post, to the designated government facility at Fort Bragg, North Carolina, with the marked for and freight shipping address identical. The required delivery date is August 3, 2026, and the item has no shelf life requirement. All government identification must be removed from non-accepted supplies prior to return. The contracting office is the ASC Commodities Division under the Department of Defense, with primary point of contact Debra Fowler, and the order is classified under NAICS code 332618.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-14MM
The contract pertains to the procurement of four grooved, headless pins identified by NSN 0001S00000052 under Solicitation SPE4A6-26-T-14MM, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 286 days after order, with performance located in Tracy, California, 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the origin. Government identification markings must be removed from non-accepted items, and all items must be physically identified as bare components. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed required DLA training and questionnaires, and receiving explicit approval from DLA authorities. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and primary point of contact is Susan Barlow at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14PK
The contract specifies the procurement of 14 straight, headless pins with part number MS51400-246 and NSN 5315-01-543-7372, under solicitation SPE4A6-26-T-14PK. Delivery is required FOB origin within 217 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and no item unique identification is required per customer request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, including ASTM D3951 for packaging. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required unless otherwise stipulated. Attributes are assigned verification levels or AQLs as defined, and unspecified attributes are treated as major. The material has no shelf life restriction. The delivery address is Tracy, California, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract was posted August 9, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s ASC Commodities Division under NAICS code 332618.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-946M
The contract solicitation seeks 49 O-rings with NSN 5331-00-290-9384 under solicitation number SPE7L1-26-T-946M, with a response deadline of August 20, 2026, and a delivery requirement of 69 days after award. All supplied items must be completely free of asbestos, and any alternative materials must receive formal approval per Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. Covered defense information may apply, and performance is designated for New Cumberland, PA, 17070-5002. The solicitation is issued by the Department of Defense’s Land Supply Chain under NAICS code 332618, with Chelsea Cunningham as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-T-6184
The contract is for a single tapered plain pin with NSN 5315-01-723-0297, ordered under solicitation SPE7M2-26-T-6184 by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 144 days from award, and responses must be submitted by August 20, 2026. The item is subject to extensive technical and quality requirements referenced from the DLA Master List, including packaging, configuration change management, and export control regulations. Technical data associated with this item is controlled under either ITAR or EAR, and its disclosure or export to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Contractors must be certified under the US/Canada Joint Certification Program, have completed DLA’s export-controlled data training and questionnaire, and be formally approved by DLA to access this technical data. DFARS 252.225-7048 governs compliance, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with Tiffany Scott as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details