Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, TAPERED, PLAIN

Active
SPE7M2-26-T-6173Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a tapered plain pin with NSN 5315-01-723-0297, ordered in a quantity of three units under purchase request 7017777811, with delivery required within 165 days after award. The solicitation number is SPE7M2-26-T-6173, posted on August 9, 2026, with responses due by August 20, 2026, and is issued by the Department of Defense’s Nuclear Reactor Program. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaires, and have received formal approval from DLA. Configuration changes must follow formal engineering change proposal procedures, and any deviations or waivers require formal variance requests. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is David Larsen at david.larsen@dla.mil.

General Info

Three tapered plain pins ordered for New Cumberland, PA, under ITAR/EAR export controls, due in 165 days.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6173 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,TAPERED,PLAIN
PIN,TAPERED,PLAIN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-723-0297 Quantity: 3 EA Purchase Request: 7017777811QTY: 3 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK
Solicitation # SPE4A6-26-T-14PX
The contract pertains to the procurement of a commercial item identified as a PIN, LOCK with NSN 5315-01-611-2291 and part number 2WZV8, supplied by BEE INDUSTRIES and KAREN CARLISLE. The item is subject to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and the DLA Packaging Requirements for Procurement, with all items palletized according to RP001. The unit of issue is each, with a total quantity of 28 units, delivered FOB origin and inspected at destination. The delivery window is 162 days from the contract date, with a required ship date of January 27, 2027, and an original delivery deadline of February 4, 2027. No quantity variance is permitted. The item must be marked as specified under RQ017, and any non-accepted supplies must have government identification removed per RQ011. Documentation and source approval must meet RC001 requirements. Delivery is designated to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures follow DLAD Proc Note C19 and C20. The solicitation was issued under contract number SPE4A6-26-T-14PX, with a response deadline of August 17, 2026, and a unit price of $28.00 per unit, totaling $784.00.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-326U
The contract is for the procurement of 403 units of an O-RING with NSN/Part Number 5331-00-263-8033, under Purchase Request 7017234652QTY: 10635, with a delivery requirement of 165 days after award. The item must be free of asbestos, and any prior part numbers containing asbestos are no longer acceptable; alternatives require formal approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision based on the type of acquisition—simplified or large—defined by either the solicitation issue date, award date, or amendment date if applicable. Packaging must comply with DLA specifications, and all supplied items must have government identification removed if not accepted. The solicitation, numbered SPE7M4-26-T-326U, was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 332618. Performance is required at Robins AFB, Georgia, 31098-1887, with primary point of contact Steven Chomos at the Fluid Handling Division, Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14PS
The contract specifies the procurement of a shoulder-headed pin rivet with part number HST12YW14-16 and NSN 5320-01-714-2640, requiring a quantity of three units to be delivered FOB origin within 104 days of contract award. Inspection and acceptance are both conducted at the destination point, with zero tolerance for non-conformances enforced under a zero-based sampling plan aligning with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major classification, and while MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero defects unless otherwise stated. All technical and quality requirements referenced under R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standard including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement, with each unit packed per the contracted QUP. The items are to be shipped to DLA Distribution Cherry Point at Phantom Road, Building 147, Bay A, Cherry Point, NC, 28533-5040, with freight handled in accordance with DLAD Proc Notes C19 and C20. The original required delivery date is August 7, 2026, and the solicitation number is SPE4A6-26-T-14PS, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14MD
The contract is for a quick release pin, part number BLC16R1.25S with NSN 5315-01-304-6935, under solicitation SPE4A6-26-T-14MD, with a required delivery of 13 units within 155 days. The item is classified as a critical application item and must comply with stringent technical and quality mandates referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in all phases of the product, preservation, packaging, and marking except for functional uses in specified equipment like batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-approved reagents, with portable devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Packaging must adhere to DLA’s RP001 requirements, with no special marking and palletization compliant with DLA standards. Delivery is FOB origin to the DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The supply must be delivered by April 5, 2026, to meet the original required delivery date of May 31, 2026, with no tolerance for quantity variance. All documentation and compliance are tied to the DLA acquisition framework and the unit of issue is established per official DoD guidance.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A7-26-T-633D
The contract SPE4A7-26-T-633D specifies the requirement for Production Lot Testing of 102 units with NSN/Part Number 0001S00000062, under a delivery timeline of 296 days from award. The contractor must execute and document comprehensive lot testing in accordance with the technical data package, including actual test results and specified tolerances, and submit a Production Lot Test Report clearly marked with the contract and lot numbers. This report must be presented to the Quality Assurance Representative for review and must be accompanied by signed DD Form 1222 and DD Form 250/iRAPT receiving reports, a copy of the contract or order, all applicable test reports, material and process certifications, process operation and inspection method sheets, and manufacturing drawings with appropriate markings to restrict public disclosure and limit government use as necessary. The solicitation, issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, was posted on August 9, 2026, with responses due by August 17, 2026, and performance is to occur at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is James Stearns, reachable via email and phone for contract-related inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-635C
The contract pertains to the procurement of one quick release pin with NSN 5315-01-555-7292 under solicitation SPE4A7-26-T-635C, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 243 days from award, with a response deadline of August 17, 2026, and the item is destined for performance at Tracy, California, with a zip code of 95304-5000. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. This item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and compliance with Cybersecurity Maturity Model Certification Level 2 through either self-assessment or certification by a C3PAO. Covered Defense Information applies, and the solicitation is governed by federal procurement regulations under NAICS code 332618.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-14JY
The contract pertains to the procurement of 5 straight-headed pins designated by NSN 5315-01-605-6677 and part number 347/10415 under solicitation SPE4A6-26-T-14JY, with a unit price of $5.00 per item and a total value of $25.00. Delivery is required within 20 days from the contract award date, with delivery terms set at FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, but must adhere to superseding DLA Master List of Technical and Quality Requirements. Packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The products are to be shipped by traceable means, prohibiting parcel post, to the designated government facility at Fort Bragg, North Carolina, with the marked for and freight shipping address identical. The required delivery date is August 3, 2026, and the item has no shelf life requirement. All government identification must be removed from non-accepted supplies prior to return. The contracting office is the ASC Commodities Division under the Department of Defense, with primary point of contact Debra Fowler, and the order is classified under NAICS code 332618.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-14MM
The contract pertains to the procurement of four grooved, headless pins identified by NSN 0001S00000052 under Solicitation SPE4A6-26-T-14MM, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 286 days after order, with performance located in Tracy, California, 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the origin. Government identification markings must be removed from non-accepted items, and all items must be physically identified as bare components. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed required DLA training and questionnaires, and receiving explicit approval from DLA authorities. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and primary point of contact is Susan Barlow at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14PK
The contract specifies the procurement of 14 straight, headless pins with part number MS51400-246 and NSN 5315-01-543-7372, under solicitation SPE4A6-26-T-14PK. Delivery is required FOB origin within 217 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and no item unique identification is required per customer request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, including ASTM D3951 for packaging. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required unless otherwise stipulated. Attributes are assigned verification levels or AQLs as defined, and unspecified attributes are treated as major. The material has no shelf life restriction. The delivery address is Tracy, California, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract was posted August 9, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s ASC Commodities Division under NAICS code 332618.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-946M
The contract solicitation seeks 49 O-rings with NSN 5331-00-290-9384 under solicitation number SPE7L1-26-T-946M, with a response deadline of August 20, 2026, and a delivery requirement of 69 days after award. All supplied items must be completely free of asbestos, and any alternative materials must receive formal approval per Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. Covered defense information may apply, and performance is designated for New Cumberland, PA, 17070-5002. The solicitation is issued by the Department of Defense’s Land Supply Chain under NAICS code 332618, with Chelsea Cunningham as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-T-6184
The contract is for a single tapered plain pin with NSN 5315-01-723-0297, ordered under solicitation SPE7M2-26-T-6184 by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 144 days from award, and responses must be submitted by August 20, 2026. The item is subject to extensive technical and quality requirements referenced from the DLA Master List, including packaging, configuration change management, and export control regulations. Technical data associated with this item is controlled under either ITAR or EAR, and its disclosure or export to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Contractors must be certified under the US/Canada Joint Certification Program, have completed DLA’s export-controlled data training and questionnaire, and be formally approved by DLA to access this technical data. DFARS 252.225-7048 governs compliance, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with Tiffany Scott as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-082-0297, with a total quantity of 7,597 units to be delivered FOB origin within 220 days of contract award. The item is classified as a critical application item and designated as a commercial product of a type, subject to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically governed by SAE AS39029 Revision E dated May 1, 2023. Packaging and labeling must comply with MIL-STD-2073-1E and MIL-STD-129, requiring each unit to be marked with the current and most recently superseded part numbers; however, an exception is permitted where only the current required part number must appear on the label. The product is exempt from intentional mercury content except where used in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with inspection and acceptance occurring at the destination. The contract enforces a zero percent quantity variance and requires adherence to hazardous materials shipping protocols under IP025. The unit of issue is each (EA), with a total price of $7,597.00, and all documentation and compliance are tied to the referenced DLA procurement procedures and technical directives.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE7M2-26-T-6182
The contract specifies the procurement of 24 socket head cap screws identified by NSN 5305-01-426-4612 and part number NAS1352C03LE6, conforming to the non-government standard NAS1352 Rev 13 dated 05/31/2016. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to dimensional and quality controls per SPE7M2-26-T-6182 Section B and MIL-STD-130N for marking, excluding self-locking nuts and threads below specified sizes. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an approved zero-based plan, with zero non-conformances required unless otherwise stated, and verification levels assigned per critical, major, and minor attributes. Mercury and mercury-containing compounds are strictly prohibited in the hardware and all packaging processes, except for specified functional uses in batteries, instruments, or defense systems as authorized by NAVSEA, with portable fluorescent lamps requiring secondary containment. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 and packaging code U, and marking per MIL-STD-129 with no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin with a 158-day lead time, to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, with no variance allowed in quantity, and the contract is tied to solicitation SPE7M2-26-T-6182, with a required ship date of January 26, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6164
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 under solicitation SPE7M2-26-T-6164, with a total quantity of 4,846 packages, each containing 100 units, resulting in 484,600 individual terminals. The items are classified as commercial items and are subject to the Qualified Products List or Qualified Manufacturers List requirements, meaning only approved manufacturers may supply them. Technical compliance is governed by SAE AS21004F Revision F and AS7928 Revision C, with configuration changes requiring formal Engineering Change Proposals or variance requests. Mercury or mercury-containing compounds are expressly prohibited from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices containing mercury in accordance with NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E, with marking compliant to MIL-STD-129, no special marking required, and palletization in line with DLA packaging guidelines. Barcoding must conform to ISO/IEC 16388. Delivery is FOB origin with the destination being the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is 158 days after award with a need ship date of January 26, 2027. Inspection and acceptance occur at destination with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and transportation details are governed by DLAD procedures C19 and C20.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7M2-26-T-6176
The contract is for the procurement of 2,174 units of INSERT, SCREW THREAD under solicitation SPE7M2-26-T-6176, with a delivery deadline of 158 days after contract award. The item is classified as a commercial item and must comply with the current revision of the applicable military or consensus non-government part standard, with past revisions accepted only for previously manufactured hardware. All hardware produced after the solicitation date must adhere strictly to the latest version of the standard. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and all supplies must be marked accordingly. The contract incorporates technical and quality requirements from the DLA Master List, and packaging must meet DLA specifications. Zero-based sampling per MIL-STD-1916 or ASQ H1331 is mandated, with critical, major, and minor attributes assigned specific verification levels or AQLs unless otherwise stated; unspecified attributes are treated as major. No intentional addition of mercury or mercury-containing compounds is permitted unless for specific exempted uses such as batteries, fluorescent lamps, or specialized instrumentation, and where used, those items must include a secondary containment to prevent leakage. Configuration change management, variance requests, and covered defense information rules are in effect, and all government identification must be removed from non-accepted supplies. The solicitation is fully competitive under a federal specification and managed by the Department of Defense’s Nuclear Reactor Program, with technical inquiries directed to David Larsen at DLA.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
The contract is for a nonmetallic hose assembly, part number 88043-224 with NSN 4720-01-379-4569, with a total quantity of 30 units, each 360 inches (30 feet) in length. The item is classified as a critical application item and must comply with stringent packaging and handling requirements per MIL-STD-2073-1E and DLA packaging standards. Each hose must be securely mounted on a reel, roll, or spool for safe transport, enclosed in a double-walled, weather-resistant fiberboard container (ASTM-D5118 Type CF), and all openings must be sealed with plastic plugs or end caps to prevent contamination. Packaging must include protective wrapping using code CA to reduce abrasion, and marking must conform to MIL-STD-129 with special codes including “ARROW UP” and “OPEN THIS SIDE.” As protected cargo, the item’s nomenclature must be omitted from outer packaging per MIL-STD-129, paragraph 5.4.1.6. The contract enforces zero tolerance for quantity variance and specifies delivery FOB origin with inspection and acceptance occurring at destination. The supplier must comply with DLA’s technical and quality requirements referenced in the DLA Master List and adhere to CMMC Level 2 self-assessment for cybersecurity. Delivery is due within one day of award, with the original required delivery date of January 26, 2027, and the need ship date set for August 22, 2026. Fulfillment must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contractor is obligated to provide shelf life data if applicable and notify the DLA Land and Maritime Contract Administrator for any required updates. The solicitation number is SPE7M2-26-T-6163, issued by the Department of Defense under the Nuclear Reactor Program, with the point of contact being Kirstan Seck.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M2-26-T-6162
This contract specifies the procurement of 101 linear feet of seamless stainless steel pipe, grade TP304, schedule 80, with nominal 1-inch diameter and random lengths between 12 and 24 feet. The item is classified as a commercial item and a critical application component, subject to full and open competition. Technical and quality standards are governed by ASTM A312/A312M Revision B dated May 1, 2025, and all requirements are aligned with the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. The pipe must be free of intentional mercury or mercury-containing compounds, with exceptions only for approved functional uses such as batteries, instrumentation, or weapons systems, and any portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and cushioning methods, while marking adheres strictly to MIL-STD-129N with barcoding per AIM BC1. Palletization limits gross weight to 2,000 pounds per lift, and all shipments require compliance with DLA packaging and transportation procedures. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a quantity tolerance of plus or minus 10 percent applies. The item is identified by NSN 4710-01-155-0196 and purchase request number 7017685265, with a unit price of $101.00 per foot for a total contract value of $10,201. Required delivery is within 158 days of contract award, with an original delivery date of March 27, 2027, and a needed ship date of January 26, 2027. The delivery destination is DLA Distribution San Joaquin, receipt warehouse 57, located at 25600 S Chrisman Rd, Tracy, CA 95304-5000, United States. All shipments must follow DLAD proc notes C19 and C20 for transportation and first destination handling. The solicitation number is SPE7M2-26-T-6162, issued under the NAICS code 332996 by
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6172
The contract specifies the procurement of washers, lock, identified by NSN 5310000115093, under solicitation SPE7M2-26-T-6172, with a total quantity of 552 hardware units divided into two line items: 55 units and 497 units. All items must conform to technical standards NASM35338 Revision 5 and ASME B18.21.1 Revision 9, with strict adherence to configuration change management and engineering change proposal requirements. Full and open competition applies, and the item is designated as a critical application component. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for specific functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and ASTM D3951, using preservation method code 10, and marking must follow MIL-STD-129 without special marking codes. Palletization must meet DLA packaging requirements, and delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at destination, with delivery timelines of 186 days from contract award. Deliveries are split between two DLA distribution centers: Hill AFB, Utah, and New Cumberland, Pennsylvania, with specific shipping addresses and parcel post instructions provided. The contract enforces compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions are controlled by the revision in effect on the solicitation issue date. The original required delivery date is March 20, 2027, with need ship dates of June 15, 2027, for the first shipment and February 23, 2027, for the second.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE7M2-26-T-6175
The contract calls for the procurement of electrical insulation sheets measuring 48 inches by 36 inches by 0.75 inches, with a total quantity of 2,199 sheets, unit of issue being SHEET. The material must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and only approved suppliers—K-FLEX USA L.L.C. with part number 6RSHF3X4068 and ARMACELL LLC with part number NHS34043—are authorized. Mercury and mercury-containing compounds are strictly prohibited in the product, its packaging, preservation, or marking, with limited exceptions for functional applications like batteries or instruments specified by NAVSEA, which must include secondary containment and be shockproof per NAVSEA 5100-003D. The insulation sheet is designated as a critical application item, requiring full compliance with all DLA packaging guidelines including MIL-STD-2073-1E and MIL-STD-129 for marking, no special marking is required, and palletization must follow RQ001 standards. Delivery is FOB origin with zero variance allowed in quantity, inspected and accepted at destination. The delivery deadline is 134 days after award, with a required ship date of January 2, 2027, and original delivery date of February 2, 2027. All shipments must be sent to DLA Distribution San Diego at the designated address, and transportation protocols follow specific DLAD procedural notes. The solicitation number is SPE7M2-26-T-6175, with a response deadline of August 20, 2026, and the contract falls under NAICS code 335932 for the Department of Defense’s Nuclear Reactor Program.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6186
The contract pertains to the procurement of 4,637 plain hexagon nuts identified by NSN 5310-01-089-3714 under solicitation SPE7M2-26-T-6186, issued by the Department of Defense’s Nuclear Reactor Program. The nuts are sourced in full competition in compliance with applicable military or federal specifications, and the solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 151 days after order, with performance taking place at Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is categorized under NAICS code 332722 for fastener manufacturing. Primary point of contact for inquiries is David Larsen, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6181
This contract is for the procurement of TERMINAL, LUG with NSN 5940-01-054-6295, under solicitation SPE7M2-26-T-6181, requiring 684 packages, where each package contains 100 units. The item is classified as a commercial item and is subject to a Qualified Products List or Qualified Manufacturers List, meaning only approved suppliers may fulfill the contract. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Configuration changes require formal Engineering Change Proposal or variance requests, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, lights, or weapon systems, with additional containment and safety requirements per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129, no special markings required, and barcoding in accordance with ISO/IEC 16388. The product is designated a Critical Application Item and must meet SAE AS21004F and AS7928 revisions dated 2023 and 2019 respectively, with part number MS21004-4. Delivery is FOB origin with a 151-day lead time, no variance allowed in quantity, and inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is April 6, 2027, with a need ship date of January 19, 2027. Transportation and shipping follow DLA Procurement Notes C19 and C20. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with primary point of contact Vlada Artyemova, and was posted on August 9, 2026, with proposals due by August 20, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M2-26-T-6166
This contract pertains to the procurement of a switch assembly identified by NSN 5930016055090 and part number 159400G1, with a total quantity of three units to be supplied under solicitation SPE7M2-26-T-6166. Delivery is required within 158 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging, as well as MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must be palletized per DLA guidelines, with no hazardous material transport allowed via parcel post unless following DLAD PROC NOTE C19 and C20. The designated delivery address is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is a total small business set-aside under NAICS code 334419, with a response deadline of August 20, 2026, and the award is anticipated to be made by the Nuclear Reactor Program under the Department of Defense. The unit price is $3.00 per item, with an aggregate total price of $9.00.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6169
The contract specifies the procurement of 30 plain hexagonal nuts with a 0.875 inch diameter, threaded to 0.875-14UNF-2B, manufactured from nickel alloy grade 500 in an annealed and hardened condition. These nuts are defined as a commercial item and must conform to the current revision of MIL-DTL-1222J, with historical production to prior but當時有效 revisions still acceptable. Mandatory identification includes the material symbol .K., the manufacturer's symbol, and lot number as required by MIL-DTL-1222J paragraph 3.13, and additional marking per MIL-STD-130N. The item is classified as critical application hardware and may not contain mercury or mercury compounds except under specific, narrowly defined exceptions such as functional use in batteries, instruments, or weapon systems, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E, using preservative method 10, with marking per MIL-STD-129 and no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin to Tracy, California, with a 165-day delivery schedule, inspection and acceptance occurring at destination, quantity strictly fixed at 30 units with no variance allowed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details