Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-26-T-12AVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 389 units of a QUICK RELEASE PIN with NSN 5315-01-567-8633 under solicitation SPE4A6-26-T-12AV, issued by the DLA Commodity Division under the Department of Defense. The requirement is fully competitive and governed by military or federal specifications, with manufacturing must adhere to the current revision of the applicable part standard; previous revisions are acceptable only for hardware produced prior to the solicitation date. All delivered items must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, while unspecified attributes are deemed major. The product must be delivered within 112 days of award to the place of performance in New Cumberland, PA, with the solicitation opening on August 4, 2026, and responses due by August 12, 2026. Government identification must be removed from non-accepted supplies, and the primary point of contact is Michael Jefferson, reachable at the provided DLA email and phone number.

General Info

Procure 389 quick release pins per military specs, deliver to New Cumberland, PA within 112 days, zero-defect acceptance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12AV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Michael Jefferson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN,QUICK RELEASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5315-01-567-8633 Quantity: 389 EA Purchase Request: 7017739600QTY: 389 Delivery: 112 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12JP
The contract pertains to the procurement of four quick-release pins with NSN 5315-01-575-1529 under solicitation SPE4A6-26-T-12JP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of contract award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements. The items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the U.S. Coast Guard Station Cape Cod Canal in Sandwich, Massachusetts, with specific freight and parcel post identifiers provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List, and the supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance. The unit price is $4.00 per item, totaling $16.00, and the required delivery date is July 29, 2026. Supplier identification codes include McMaster-Carr Supply Company (07BY4) and QRP Inc (09094) with respective part numbers 93750A303 and QRP2C040.75L12A4. Government use codes and project identifiers are included for internal tracking.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-12BV
The contract specifies the procurement of 58 units of a PIN, STRAIGHT, HEADED component identified by NSN 5315-01-519-1840 and part number 2CX715, under solicitation SPE4A6-26-T-12BV. The unit price is $58.00 per EA, totaling $3,364.00, with delivery required FOB origin in 171 days, and the original delivery date was December 5, 2026, with a needed ship date of January 31, 2027. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at the destination, and the item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA Packaging Requirements for Procurement (RP001), with the Unit of Issue and Quantity per Unit Pack as specified. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The component is subject to government identification removal upon non-acceptance per RQ011, and the solicitation falls under NAICS code 332618 with the contracting office under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-12EF
The item is a PIN, RETAINING with NSN 5315-01-611-3540, for a quantity of 116 units, under purchase request 7017740108, with a delivery requirement of 171 days after delivery order. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of the data to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign nationals employed by U.S. companies or their subsidiaries, and compliance with DFARS 252.225-7048 is mandatory. Access to the controlled technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire, with approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-12EF, posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 332618. The contracting activity is the ASC Commodities Division of the Department of Defense, with the place of performance in Tracy, California, 95304-5000, and primary point of contact is Samantha Hopkins, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-12CR
The contract specifies the procurement of 14 grooved, headless pins identified by NSN 5315-01-656-9036 and part number 930030, with a unit price of $14.00 and a total contract value of $196.00. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA’s RP001 packaging requirements, with palletization following specified guidelines. The unit of issue is each (EA), and the quantity variance is strictly zero percent. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the items must be delivered within 171 days from the contract date. The required delivery date is February 16, 2027, with a needed ship date of January 31, 2027. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was issued under contract SPE4A6-26-T-12CR, with a response deadline of August 12, 2026, and the contracting office is the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-328Z
The contract specifies the procurement of a weldless chain identified by part number NAS1455A00-6 and NSN 4010-00-855-8313, with a requirement for one unit to be delivered within 20 days from the order date. The item is classified as a critical application item with no shelf life requirement and must comply with Technical Data Package Rev A Gen 1 per NAS1455 Revision 2 dated 09/19/2014, as well as referenced standards including RR-C-271H and drawing 13873. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including RQ001 for tailored quality requirements, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 under zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 but is subordinate to DLA Master List requirements and must be labeled per MIL-STD-129, with palletization following RP001 guidelines. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at origin. Cybersecurity requirements include CMMC Level 2 self-assessment compliance under DFARS 252.211-7003(c)(1)(i), and covered defense information provisions apply. The item must be shipped by traceable means only—parcel post is prohibited—and delivered to Fairchild AFB, WA. The contract was issued under solicitation SPE4A5-26-T-328Z with a response deadline of August 12, 2026, and the original required delivery date is March 19, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLESS
Solicitation # SPE4A6-26-T-12MP
The contract specifies the procurement of 273 units of PIN SHOULDER HEADLESS with NSN 5315-01-177-9226 under solicitation SPE4A6-26-T-12MP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, and responses must be submitted by August 12, 2026. The acquisition is subject to the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers incorporated by reference. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA standards, and inspection and acceptance occur at the manufacturer’s origin. Non-accepted supplies must have government identification removed, and all items require physical identification or bare item marking. Technical data associated with this item is controlled under ITAR or EAR, restricting disclosure to foreign persons—both inside and outside the U.S.—and mandates adherence to DFARS 252.225-7048. Access to export-controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DOD export control training and received DLA approval. The place of performance is Anniston, Alabama, with Susan Barlow designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-322A
The contract specifies the procurement of wire rope conforming to stringent technical and quality standards under the DLA Master List of Technical and Quality Requirements. The product is improved plow steel, uncoated, with a one-inch diameter, right regular lay construction, IWRC, and preformed, delivered in reels of 850 feet each. Five reels are required, with no tolerance for quantity variance. Each reel must be packaged in accordance with ASTM D3951, but DLA requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. The item is classified as a critical application, requiring compliance with the tailored higher-level contract quality requirements referenced in TDP Rev A Gen 1 per RR-W-410J Revision J dated January 3, 2022. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and inspection and acceptance occur at destination. The item carries NSN 4010-01-089-9234 and is to be delivered FOB origin to DLA San Joaquin in Tracy, California, by January 31, 2027, with an original required delivery date of November 15, 2026. Palletization must comply with DLA packaging requirements, and transportation is governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-322A, with primary point of contact Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A5-26-T-325R
The contract specifies the procurement of 24 straight headed pins with NSN 5315-01-707-7833 under solicitation SPE4A5-26-T-325R, with delivery required to DLA Distribution in San Diego within 171 days of award. All items must comply with strict technical and quality requirements referenced through R-numbers in the DLA Master List, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and adherence to DLA packaging and transportation guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under a zero-based sampling plan unless otherwise defined, and verification levels are fixed at VII, IV, and II for critical, major, and minor attributes respectively. The manufacturer must hold and self-assess Cybersecurity Maturity Model Certification Level 2 and conform to SAE AS9100 for quality systems. Unit of issue is each (EA), with no variance allowed in quantity, and delivery is FOB origin. Special marking is not required, and palletization must follow DLA packaging standards. The contract includes detailed freight and shipping instructions, with an original required delivery date of March 27, 2028, despite a need ship date of January 31, 2027, indicating potential scheduling flexibility. The contracting office is the Department of Defense under the ASC Supplier Oper OEM Division, with point of contact Yvonne Jackson-Dias.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK, DETENT
Solicitation # SPE4A6-26-T-12CW
The contract pertains to the procurement of 15 units of PIN, LOCK, DETENT with NSN 5315-01-657-2337 under solicitation SPE4A6-26-T-12CW, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline is set at 171 days after order, with performance to occur at New Cumberland, Pennsylvania, zip 17070-5002. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 332618. The primary point of contact is Paul Askew, reachable at paul.askew@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-328F
The contract is for a weldless sash chain, specified as type 2, class 3, with a material size of 0.050, delivered in 100-foot units per box, each box having a minimum breaking strength of 650 pounds. The chain is to be bronze, self-colored, and packaged in accordance with ASTM D3951 and MIL-STD-129, with all packaging and labeling strictly following DLA’s master requirements, which override any conflicting standards. The unit of issue is BX, with a quantity of one box and a delivery window of ten days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for variance in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformities unless otherwise stated. Attributes are assigned verification levels or AQLs as specified, with unspecified attributes treated as major. Physical identification of the item must conform to RQ017 and the referenced technical data package revision H dated January 3, 2022. Shipping must use the fastest traceable method excluding parcel post to the designated delivery point at Fort Hood, Texas, with detailed markings and the military freight control number provided. The contract is issued under solicitation SPE4A5-26-T-328F with NSN 4010-00-186-9411, and the required delivery date is July 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-612U
The contract pertains to the procurement of 43 quick release pins with NSN 5315-01-566-8446 under solicitation SPE4A7-26-T-612U, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 171 days after order placement, and responses must be submitted by August 12, 2026. The specification incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which control based on the solicitation issue date for simplified acquisitions or the RFP issuance date for larger procurements, with amendments overriding earlier revisions. All supplies must comply with MIL-STD-1916 or ASQ H1331 Table 1 sampling protocols unless otherwise directed, with zero non-conformances required in sampled lots unless specified otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Covered Defense Information applies, and non-accepted supplies must have all government identification removed prior to return. The place of performance is New Cumberland, PA, 17070-5002, with Brad Ingram as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details