Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A7-26-T-612UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 43 quick release pins with NSN 5315-01-566-8446 under solicitation SPE4A7-26-T-612U, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 171 days after order placement, and responses must be submitted by August 12, 2026. The specification incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which control based on the solicitation issue date for simplified acquisitions or the RFP issuance date for larger procurements, with amendments overriding earlier revisions. All supplies must comply with MIL-STD-1916 or ASQ H1331 Table 1 sampling protocols unless otherwise directed, with zero non-conformances required in sampled lots unless specified otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Covered Defense Information applies, and non-accepted supplies must have all government identification removed prior to return. The place of performance is New Cumberland, PA, 17070-5002, with Brad Ingram as the primary point of contact.

General Info

Procure 43 quick release pins by August 12, 2026, deliver within 171 days, comply with MIL-STD-1916, zero non-conformances, New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-612U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brad Ingram
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN,QUICK RELEASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5315-01-566-8446 Quantity: 43 EA Purchase Request: 7017739606QTY: 43 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12JP
The contract pertains to the procurement of four quick-release pins with NSN 5315-01-575-1529 under solicitation SPE4A6-26-T-12JP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of contract award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements. The items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the U.S. Coast Guard Station Cape Cod Canal in Sandwich, Massachusetts, with specific freight and parcel post identifiers provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List, and the supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance. The unit price is $4.00 per item, totaling $16.00, and the required delivery date is July 29, 2026. Supplier identification codes include McMaster-Carr Supply Company (07BY4) and QRP Inc (09094) with respective part numbers 93750A303 and QRP2C040.75L12A4. Government use codes and project identifiers are included for internal tracking.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-12BV
The contract specifies the procurement of 58 units of a PIN, STRAIGHT, HEADED component identified by NSN 5315-01-519-1840 and part number 2CX715, under solicitation SPE4A6-26-T-12BV. The unit price is $58.00 per EA, totaling $3,364.00, with delivery required FOB origin in 171 days, and the original delivery date was December 5, 2026, with a needed ship date of January 31, 2027. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at the destination, and the item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA Packaging Requirements for Procurement (RP001), with the Unit of Issue and Quantity per Unit Pack as specified. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The component is subject to government identification removal upon non-acceptance per RQ011, and the solicitation falls under NAICS code 332618 with the contracting office under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-12EF
The item is a PIN, RETAINING with NSN 5315-01-611-3540, for a quantity of 116 units, under purchase request 7017740108, with a delivery requirement of 171 days after delivery order. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of the data to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign nationals employed by U.S. companies or their subsidiaries, and compliance with DFARS 252.225-7048 is mandatory. Access to the controlled technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire, with approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-12EF, posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 332618. The contracting activity is the ASC Commodities Division of the Department of Defense, with the place of performance in Tracy, California, 95304-5000, and primary point of contact is Samantha Hopkins, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-12CR
The contract specifies the procurement of 14 grooved, headless pins identified by NSN 5315-01-656-9036 and part number 930030, with a unit price of $14.00 and a total contract value of $196.00. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA’s RP001 packaging requirements, with palletization following specified guidelines. The unit of issue is each (EA), and the quantity variance is strictly zero percent. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the items must be delivered within 171 days from the contract date. The required delivery date is February 16, 2027, with a needed ship date of January 31, 2027. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was issued under contract SPE4A6-26-T-12CR, with a response deadline of August 12, 2026, and the contracting office is the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-328Z
The contract specifies the procurement of a weldless chain identified by part number NAS1455A00-6 and NSN 4010-00-855-8313, with a requirement for one unit to be delivered within 20 days from the order date. The item is classified as a critical application item with no shelf life requirement and must comply with Technical Data Package Rev A Gen 1 per NAS1455 Revision 2 dated 09/19/2014, as well as referenced standards including RR-C-271H and drawing 13873. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including RQ001 for tailored quality requirements, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 under zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 but is subordinate to DLA Master List requirements and must be labeled per MIL-STD-129, with palletization following RP001 guidelines. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at origin. Cybersecurity requirements include CMMC Level 2 self-assessment compliance under DFARS 252.211-7003(c)(1)(i), and covered defense information provisions apply. The item must be shipped by traceable means only—parcel post is prohibited—and delivered to Fairchild AFB, WA. The contract was issued under solicitation SPE4A5-26-T-328Z with a response deadline of August 12, 2026, and the original required delivery date is March 19, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLESS
Solicitation # SPE4A6-26-T-12MP
The contract specifies the procurement of 273 units of PIN SHOULDER HEADLESS with NSN 5315-01-177-9226 under solicitation SPE4A6-26-T-12MP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, and responses must be submitted by August 12, 2026. The acquisition is subject to the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers incorporated by reference. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA standards, and inspection and acceptance occur at the manufacturer’s origin. Non-accepted supplies must have government identification removed, and all items require physical identification or bare item marking. Technical data associated with this item is controlled under ITAR or EAR, restricting disclosure to foreign persons—both inside and outside the U.S.—and mandates adherence to DFARS 252.225-7048. Access to export-controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DOD export control training and received DLA approval. The place of performance is Anniston, Alabama, with Susan Barlow designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-322A
The contract specifies the procurement of wire rope conforming to stringent technical and quality standards under the DLA Master List of Technical and Quality Requirements. The product is improved plow steel, uncoated, with a one-inch diameter, right regular lay construction, IWRC, and preformed, delivered in reels of 850 feet each. Five reels are required, with no tolerance for quantity variance. Each reel must be packaged in accordance with ASTM D3951, but DLA requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. The item is classified as a critical application, requiring compliance with the tailored higher-level contract quality requirements referenced in TDP Rev A Gen 1 per RR-W-410J Revision J dated January 3, 2022. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and inspection and acceptance occur at destination. The item carries NSN 4010-01-089-9234 and is to be delivered FOB origin to DLA San Joaquin in Tracy, California, by January 31, 2027, with an original required delivery date of November 15, 2026. Palletization must comply with DLA packaging requirements, and transportation is governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-322A, with primary point of contact Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A5-26-T-325R
The contract specifies the procurement of 24 straight headed pins with NSN 5315-01-707-7833 under solicitation SPE4A5-26-T-325R, with delivery required to DLA Distribution in San Diego within 171 days of award. All items must comply with strict technical and quality requirements referenced through R-numbers in the DLA Master List, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and adherence to DLA packaging and transportation guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under a zero-based sampling plan unless otherwise defined, and verification levels are fixed at VII, IV, and II for critical, major, and minor attributes respectively. The manufacturer must hold and self-assess Cybersecurity Maturity Model Certification Level 2 and conform to SAE AS9100 for quality systems. Unit of issue is each (EA), with no variance allowed in quantity, and delivery is FOB origin. Special marking is not required, and palletization must follow DLA packaging standards. The contract includes detailed freight and shipping instructions, with an original required delivery date of March 27, 2028, despite a need ship date of January 31, 2027, indicating potential scheduling flexibility. The contracting office is the Department of Defense under the ASC Supplier Oper OEM Division, with point of contact Yvonne Jackson-Dias.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK, DETENT
Solicitation # SPE4A6-26-T-12CW
The contract pertains to the procurement of 15 units of PIN, LOCK, DETENT with NSN 5315-01-657-2337 under solicitation SPE4A6-26-T-12CW, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline is set at 171 days after order, with performance to occur at New Cumberland, Pennsylvania, zip 17070-5002. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 332618. The primary point of contact is Paul Askew, reachable at paul.askew@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-328F
The contract is for a weldless sash chain, specified as type 2, class 3, with a material size of 0.050, delivered in 100-foot units per box, each box having a minimum breaking strength of 650 pounds. The chain is to be bronze, self-colored, and packaged in accordance with ASTM D3951 and MIL-STD-129, with all packaging and labeling strictly following DLA’s master requirements, which override any conflicting standards. The unit of issue is BX, with a quantity of one box and a delivery window of ten days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for variance in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformities unless otherwise stated. Attributes are assigned verification levels or AQLs as specified, with unspecified attributes treated as major. Physical identification of the item must conform to RQ017 and the referenced technical data package revision H dated January 3, 2022. Shipping must use the fastest traceable method excluding parcel post to the designated delivery point at Fort Hood, Texas, with detailed markings and the military freight control number provided. The contract is issued under solicitation SPE4A5-26-T-328F with NSN 4010-00-186-9411, and the required delivery date is July 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12AV
The contract is for the procurement of 389 units of a QUICK RELEASE PIN with NSN 5315-01-567-8633 under solicitation SPE4A6-26-T-12AV, issued by the DLA Commodity Division under the Department of Defense. The requirement is fully competitive and governed by military or federal specifications, with manufacturing must adhere to the current revision of the applicable part standard; previous revisions are acceptable only for hardware produced prior to the solicitation date. All delivered items must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, while unspecified attributes are deemed major. The product must be delivered within 112 days of award to the place of performance in New Cumberland, PA, with the solicitation opening on August 4, 2026, and responses due by August 12, 2026. Government identification must be removed from non-accepted supplies, and the primary point of contact is Michael Jefferson, reachable at the provided DLA email and phone number.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
This contract is for the procurement of 1,854 units of a machine thread bushing identified by NSN 5365-01-270-7546, under solicitation SPE4A7-26-T-610X, with a response deadline of August 12, 2026, and a delivery timeline of 128 days after award. The item is classified as a commercial item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item must be physically marked as specified, and any technical data associated with it is subject to export controls under ITAR or EAR, requiring prior authorization for disclosure to foreign persons or entities, including foreign nationals within the U.S. Only contractors with JCP certification, approved training completion, and DLA authorization may access this controlled technical data. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332510 and is managed by the Department of Defense through the ASC Supplier Oper AE and AF DIV, with performance expected in Texarkana, Texas, and primary point of contact being Jamiah Sutton.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
This contract pertains to the procurement of a CORE ASSY BOND, specified under part number LM-200-158 and NSN 2995015940126, with a quantity of 20 units to be delivered FOB origin within 171 days from the contract date. The delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item is designated as a critical application item, triggering stringent compliance requirements including compliance with CMMC Level 2 Self-Assessment and strict physical identification and bare item marking protocols. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001 specifications. All samples must be inspected using zero-based sampling per MIL-STD-1916 or ASQ H1331, Table 1, with acceptance thresholds of zero non-conformances unless otherwise directed; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. Measurement and test equipment must meet RT001 standards, and documentation for source approval requests is required under RC001. Removal of government identification from rejected items is mandatory under RQ011, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers under RQ001. The contract is under solicitation SPE4A7-26-T-612N, issued by the Department of Defense, with a response deadline in August 2026 and a required delivery date of May 23, 2027. No quantity variance is permitted, and the unit of issue is each, with full compliance with DLA’s authorized unit of issue framework.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details