This Government Contract opportunity from Department Of Veterans Affairs was posted on July 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pipe Support and Hanger System Design and Installation

Closed

Federal

Submission Closed08/07/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

Supply of FN Herstal Gun Mount PedestalThis subcontract involves the procurement and delivery of one FN Herstal S.A. gun mount pedestal, specifically part number 3634200650 and NSN 1010131231283, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the contractor to perform marking and labeling according to MIL-STD-129 and provide comprehensive quality assurance documentation to meet Critical Application Item standards. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 332994. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Warning Streamer / Ground Safety PinsThis subcontract involves the manufacture of 56 Warning Streamer Pins, identified by NSN 1730-00-784-9258, for prime contractors supporting Department of Defense DLA supply contracts. The fabrication process must strictly adhere to Reference Drawing 76823 10Y203 Revision D, with identification markings applied according to MIL-STD-130N. Quality assurance is managed through zero-based sampling plans as specified in MIL-STD-1916 or ASQ H1331. The performing entity must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 332994 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Automatic Gun Barrels (NSN 1005-00-787-9802)This subcontract involves the supply of 225 automatic gun barrels, identified by part number 1005-00-787-9802, for prime contractors working on Department of Defense procurement projects. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the manufacturer to utilize precision machining to ensure all units strictly adhere to Form, Fit, and Function technical data requirements and government military hardware packaging standards. Eligible suppliers must possess a valid CAGE code and maintain full compliance with FAR 52.222-20. The procurement falls under NAICS code 332994, with a response deadline set for November 9, 2026. Performance of the contract will be centered in the 17070-5002 zip code area.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Small Arms Cartridge FollowerThis subcontract involves the manufacturing of small arms cartridge followers for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for fabricating components that strictly adhere to NSN 1005013589718 specifications and DLA Master List technical requirements. Production must be carried out using precision machining, as the use of additive manufacturing is explicitly prohibited for this project. Compliance requirements are stringent, necessitating a CMMC Level 2 self-assessment and adherence to the Buy American Act, the Berry Amendment, and Category I Demilitarization standards. The performance of the contract will take place in Austin, Texas, with a response deadline set for November 9, 2026. The final deliverable is the completed cartridge follower meeting all specified defense standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of XM40 Riot Control Agent Simulator DispersersThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture or procurement of 229 XM40 Riot Control Agent Simulator Dispersers for Department of Defense prime contractors. The provider must ensure all hardware meets NSN 1040-01-501-4423 specifications, conduct origin inspections, and coordinate testing witnessed by government representatives. Performance will take place in New Cumberland, Pennsylvania. Strict regulatory and security standards apply to this engagement, including mandatory CMMC Level 2 certification and full compliance with ITAR, EAR, and the Buy American Act. Additionally, the contractor is responsible for the specialized handling of UN1950 hazardous materials. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fiberlock (NSN 5342-01-052-1023)This subcontract involves the manufacture or procurement of 313 Fiberlock hardware units under NSN 5342-01-052-1023 for prime contractors supporting the DLA Weapons Support ASC. The selected provider must ensure all items are inspected according to MIL-STD-1916 or ASQ H1331 and adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packing and marking. Final delivery of the inspected units is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To qualify for this contract, the supplier must maintain SAE AS9003 or ISO 9001 certification and demonstrate full compliance with ITAR and EAR regulations. The project falls under NAICS code 332994 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Specification-Grade Tool SteelThis subcontract involves the supply of specification-grade raw tool steel to prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Land Supplier Operations. The scope of work requires the sourcing and delivery of high-strength, wear-resistant steel that strictly adheres to QPL-3150-34 and QPL-16173-84 specifications. To ensure quality and authenticity, the provider must furnish Material Test Reports certifying the grade and origin of all delivered stock. Compliance is a critical component of this agreement, as the provider must adhere to Berry Amendment domestic sourcing requirements and maintain full ITAR and EAR compliance. The performance of the contract is centered in Albany, Georgia, under NAICS code 332994. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Charging Handle Insert Catch (NSN 1005-01-715-1774)This subcontract involves the manufacture or procurement of a Charging Handle Insert Catch, identified by NSN 1005-01-715-1774, for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for delivering one unit that meets all technical specifications, ensuring the item is packaged according to MIL-STD-2073-1E standards and shipped via the fastest traceable method to Fort Campbell, Kentucky. The opportunity is categorized under NAICS code 332994 and was posted on October 28, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense to ensure the supply of critical components to military installations.

Defense Logistics Agency

POSTED

DEADLINE

Small Arms Storage Rack ManufacturingThis subcontract involves the manufacture and supply of a single small arms storage rack for prime contractors supporting DLA Weapons Support. The fabrication must strictly adhere to the technical and quality requirements specified under NSN 1095-01-561-5431 and RA001. To ensure regulatory compliance, the provider must follow the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited without explicit authorization. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this requirement categorized under NAICS code 332994.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Combat Knife Production and SupplyThis subcontract involves the manufacture and supply of 2,580 combat knives for prime contractors supporting the Department of Defense DLA Weapons Support Strategic Acq Program Directorate. The required products must meet NSN 1095-01-466-8569 and correspond to specific part numbers from Benchmade, Fiskars, or Hogue. The contractor is responsible for ensuring strict adherence to RA001 technical requirements and DLAD Procurement Note C03 for supply chain traceability. This opportunity falls under NAICS code 332994, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1562

Solicitation SPE7L3-27-T-1562 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of steel firing pins under NSN 1005-00-017-9547. The requirement consists of two primary delivery lines totaling 1,565 units, with 46 units due by October 8, 2026, and 1,519 units due by August 17, 2027. Delivery is FOB Destination to facilities in Albany, Georgia, and New Cumberland, Pennsylvania, with a lead time of 291 days after receipt of order. The contract also includes a requirement for a First Article Test of five units, with the test report due within 90 calendar days of the contract award. The procurement is subject to stringent technical and security requirements, including adherence to specific reference drawings, QPL-3150-34, and QPL-16173-84. Due to the nature of the items, the contract mandates compliance with ITAR and EAR export controls, CMMC Level 2 cybersecurity certifications, and a restricted Colt Industries License Agreement regarding technical data non-disclosure. Quality standards require a manufacturer's inspection system compliant with ISO 9001:2015 and measuring equipment compliant with ISO 10012-1. Inspection and acceptance will occur at the origin. Additionally, the solicitation incorporates the Buy American Act, Berry Amendment, and provides a price evaluation preference for SBA-certified HUBZone small business concerns.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2273

Solicitation SPE4A7-27-T-2273 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 313 units of Fiberlock, identified by NSN 5342-01-052-1023. The contract is established as FOB Origin with a required delivery date of December 31, 2026, and a need ship date of February 12, 2027, for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and inspection standards, requiring inspection and acceptance at the origin. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. The contract includes significant regulatory requirements, including export controls under ITAR and EAR, and prohibits the use of additive manufacturing unless specifically authorized. Environmental compliance is mandatory, specifically the prohibition of mercury or mercury-containing compounds in hardware and packaging per IP056. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Administrative processes, including invoicing and receiving reports, are to be managed through the Wide Area WorkFlow system. Additionally, the solicitation incorporates the Buy American Act and DFARS regulations regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract titled Pipe Support and Hanger System Design and Installation requires the design, engineering, and installation of pipe support systems and hangers that ensure structural integrity, proper load distribution, and full compliance with MSS SP-58 and ASME standards. The work must be executed with precision to meet industry safety and engineering requirements, focusing on the reliable support of piping systems in critical infrastructure settings. The project is a subcontract under a Total Small Business Set-Aside classified under NAICS code 332994, meaning only small businesses are eligible to compete for this opportunity. The solicitation was posted on July 21, 2026, with a response deadline of August 7, 2026, at 2:00 PM. Performance of the contract will take place in Montrose, New York, with a zip code of 10548-1454. The contracting office responsible is the 242-NETWORK Contract Office 02 under the Department of Veterans Affairs, though no specific point of contact is listed. The contract does not include detailed agency address information, and all submissions must be made through the provided SAM.gov portal to be considered valid.

General Info

Design and install pipe support systems per MSS SP-58 and ASME standards in Montrose, NY, for VA under small business set-aside.

Agency

Department Of Veterans Affairs → 242-NETWORK Contract Office 02 (36C242)

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Place of Performance

Montrose, NY, 10548-1454, USA

Set-Aside

SBA

Documents

This scope was carved out of 36C24226Q0816.

The full solicitation package (24 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J045--36C24226P1049 - BOILER REPAIR HUDSON VALLEY VAHCS - MONTROSE CAMPUS (1X) -

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 21

subcontract

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 242-NETWORK Contract Office 02 (36C242)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 242-NETWORK Contract Office 02 (36C242)

Office AddressN/A

ContactsNo contact information available

Full Description

Design, engineer, and install pipe support systems and hangers ensuring structural integrity, load distribution, and compliance with MSS SP-58 and ASME standards.