Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pipeline Testing and Inspection Services

Active

State & Local

Response Deadline08/24/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Pipeline Testing and Inspection Services seeks qualified subcontractors to perform post-installation pressure testing, leak detection, and joint inspection on underground piping systems, ensuring all work meets established safety and operational standards. Comprehensive certification and compliance reporting are required to document the integrity of the installed infrastructure, with all activities tied to regulatory and industry-specific benchmarks for underground pipeline systems. The scope demands technical expertise in non-destructive testing methods and the ability to deliver accurate, timely documentation that validates system performance and adherence to safety protocols. This opportunity is posted as a subcontract under NAICS code 541330 by the State of Montana, with a response deadline of August 24, 2026. The solicitation does not specify a set-aside classification or indicate particular size or ownership requirements, leaving the opportunity open to eligible subcontractors who can demonstrate proven capability in pipeline testing and certification. All work is expected to be conducted in accordance with Montana’s requirements, though the exact locations of performance are not detailed. Interested parties must submit proposals through the provided online portal by the stated deadline to be considered.

General Info

Subcontract for underground pipeline testing, inspection, and certification per Montana safety standards by August 24, 2026.

Agency

MontanaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 08:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMontana

ContactsNo contacts available

OfficeN/A

Organization / Agency

Montana

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Post-installation pressure testing, leak detection, joint inspection, and certification of underground piping systems, including compliance reporting.

Similar Contracts

Same NAICS industry code

Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 12 hours ago

DEADLINE

Refrigeration System Inspection and CommissioningThe contract pertains to the post-installation inspection and commissioning of new refrigeration doors to ensure temperature integrity, system performance, and seamless integration into existing refrigeration infrastructure. The work requires verification that the installed doors maintain optimal thermal efficiency, operate without leaks or malfunctions, and are properly synchronized with controls and monitoring systems. All tasks must align with industry standards for cold chain reliability and safety, with documentation provided to confirm compliance and operational readiness. This is a subcontract under a Small Business Set-Aside, open exclusively to SBA-certified entities including Small Businesses, Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code 541330 indicates technical consulting services related to engineering and scientific evaluation. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is unspecified, though the point of contact and agency location are tied to Management & Training Corporation. Submission must occur through the designated SBA opportunity portal.

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is inviting qualified firms including Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises to submit qualifications for participation in the Corydon Well Replacement Design Project in Riverside County, California, on behalf of the Elsinore Valley Municipal Water District. The scope of work encompasses a broad range of professional services such as engineering, environmental assessment, surveying, geotechnical analysis, permitting, public outreach, and utility location, with applicable NAICS codes covering architecture and engineering, construction, and related consulting activities. The solicitation is targeted toward small and disadvantaged businesses under SBA set-aside categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with additional alignment to DBE requirements under the Department of Transportation guidelines. Interested firms must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation materials and submit their qualifications, with all submissions due no later than 5 p.m. PST on August 14, 2026, and the final proposal deadline set for September 15, 2026.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract is a solicitation for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, operated by Management & Training Corporation (MTC). The work requires a Professional Engineer with a valid license to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size drawing set. All deliverables must meet MTC’s specifications and be of merchantable quality, free from defects, and constructed with good workmanship. The contract is a fee-for-service subcontracting opportunity under NAICS Code 541330 for engineering services, with a size standard of $9 million in annual revenue. It is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, and all subcontractors must self-certify their eligibility under FAR 52.219-8 and obtain a Unique Entity Identifier and Taxpayer Identification Number. The solicitation requires submission via email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and mandates inclusion of a completed bid sheet, W-9, Self-Certification Form, and Acceptance of Terms & Conditions. Invoices must reference the purchase order number, service dates, itemized pricing with extended unit costs and totals, and include an invoice number and date, and payment is contingent upon delivery and acceptance of services. The contractor is obligated to indemnify MTC for all liabilities arising from performance, negligence, or contract breach, and must comply with labor standards including the Federal Contractor Minimum Wage and Wage Determination SCA WD 2015-5577 Rev. 28. Contractors and subcontractors must adhere to federal data protection requirements, including encryption and one-hour reporting of any privacy breaches involving personally identifiable information, and are prohibited from retaining or disseminating data covered under the Privacy Act or FOIA exemptions. The contract is subject to FFATA reporting if the value exceeds $40,000, and first-tier subcontractors over $30,000 must disclose debarment status. Insurance is not required, but MTC retains inspection rights at all reasonable times, and the contract may be terminated with 30 days' written notice or immediately if government funding

Tongue Point Job Corps

POSTED

about 12 hours ago

DEADLINE

in about 20 hours

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, and line-bid items for drilling and abandonment, including full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board standards; Phase 2 covers detailed design of architectural, structural, mechanical, electrical, and instrumentation systems for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at 30% design completeness, review of up to 200 shop drawings and material submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. The design must adhere to AWWA standards for a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump applications, and tie discharge piping into the Corydon Blend station and Malaga blending location. The contract is set aside for small businesses including SB, SDB, WOSB, VOSB, SDVOSB, and DBE entities under SBA programs, and requires full compliance with Buy America and Build America Buy America Act provisions, including domestic content certifications and waiver procedures for non-compliant materials. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a total estimated project cost of $2,260,788, though the final professional services fee is subject to negotiation. Evaluation is weighted with 25% each for relevant qualifications and understanding of the project, 20% for schedule and scope clarity, 10% for innovation, 10% for cost value, and 10% for overall proposal quality, with award based on demonstrated competence rather than lowest price. Required submissions include certifications for debarment, lobbying, American Iron and Steel compliance, Executive Order N-6-22, conflict of interest, insurance, public works registration, and detailed DBE subconsultant information. All proposals must be submitted via EVMWD’s PlanetBids portal by 10:00 a.m.

Ardurra Group, Inc.

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and ongoing engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The solicitation, designated as C2305, requires a qualified firm to provide comprehensive engineering expertise spanning the full project lifecycle—from initial planning and design through bid evaluation and field support during construction. The work is classified under NAICS code 541330 and is set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, prioritizing participation by certified DBEs. The contract opportunity was posted on August 4, 2026, with responses due by September 1, 2026, and is being administered by AKM Consulting Engineers, with Katie Neubauer serving as the primary point of contact for inquiries. The project aims to enhance local water system reliability through the replacement of the Corydon Well, ensuring compliance with regulatory standards and efficient delivery of services to the community.

AKM Consulting Engineers

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District property in California. The scope encompasses comprehensive engineering services across two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards, civil and mechanical site planning, wellhead and facility design, bidding assistance, and full-time construction management with hydrogeological oversight during drilling; Phase 2 covers detailed architectural, structural, electrical, mechanical, and instrumentation and controls design for well equipping, testing, and commissioning, along with continued engineering support during construction. All work must comply with Riverside County and California State Water Resources Control Board regulations, including proper casing depth, sanitary seal placement, and abandonment protocols. The project is subject to the Buy America Act and Build America, Buy America requirements, mandating domestic sourcing of iron, steel, and manufactured products, with certification and documentation requirements enforced through subcontracts exceeding $150,000. The project is funded partially by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, necessitating full compliance with 2 CFR Part 200, including audit rights, debarment and suspension checks, and lobbying restrictions. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, capped at a not-to-exceed amount of $1,000,000. Evaluation prioritizes demonstrated qualifications and experience in municipal groundwater projects, technical understanding of the scope, realistic scheduling, innovation, and overall proposal quality, with cost being a secondary consideration. All respondents must provide certifications for non-collusion, American Iron and Steel compliance, debarment/suspension status via SAM, DBE participation, public works registration, insurance acknowledgment, and Executive Order N-6-22 compliance, along with resumes of key personnel and proof of California professional licensure. Work is scheduled to begin in November 2026 and conclude by May 2028, with monthly invoicing and progress reporting required, subject to 45-day payment terms. Subconsultants must be certified and disclosed, and the project emphasizes outreach to small, disadvantaged, women-owned, and minority-owned businesses. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and include all mandatory attachments and forms

GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

Civil Engineering Inspection & Construction SupportThe contract seeks a contractor to provide construction-phase support services for paving projects under the City of Bellevue’s civil engineering oversight. Key responsibilities include reviewing submittals, conducting site visits, and coordinating inspections to ensure compliance with project specifications and standards. The work requires a thorough understanding of paving construction practices, materials, and quality control procedures to support smooth project execution and regulatory adherence. This is a subcontract opportunity with a NAICS code of 541330, indicating it falls under architectural and engineering services. The solicitation was posted on August 4, 2026, with a response deadline of August 25, 2026, at 9:00 PM. The place of performance is within the jurisdiction of the City of Bellevue in Washington, and all work must align with local municipal requirements. Bidders must be prepared to demonstrate relevant experience in construction inspection and coordination for civil infrastructure projects.

City of Bellevue

POSTED

about 13 hours ago

DEADLINE

Pavement Design Engineering ServicesThe City of Bellevue is seeking qualified firms to provide civil engineering design services for annual pavement preservation and resurfacing projects, requiring comprehensive plans, detailed specifications, and construction documentation. The work encompasses all technical aspects of designing pavement treatments to maintain and extend the lifespan of city roadways, with deliverables focused on ensuring compliance with engineering standards and efficient construction execution. This subcontract opportunity is open for bidding with a response deadline of August 25, 2026, and is classified under NAICS code 541330 for engineering services. All project activities are expected to be performed within the jurisdiction of Bellevue, Washington, and interested parties must submit proposals through the designated public procurement portal prior to the deadline to be considered for award.

City of Bellevue

POSTED

about 13 hours ago

DEADLINE

On-Call Pavement Preservation Engineering Services

Solicitation # 26085

The City of Bellevue Transportation Department is seeking qualified consulting firms to provide on-call engineering services focused on pavement preservation, covering civil engineering, geotechnical engineering, and survey/geomatics support. This solicitation, numbered 26085, is open for responses until August 25, 2026, with proposals due by 9:00 PM Pacific Time. The services will be performed within the state of Washington and are intended to support the City's infrastructure maintenance and improvement efforts. Interested firms must demonstrate expertise in pavement analysis, design, and related fields to be considered for inclusion on the on-call list. The primary point of contact for inquiries is Kelli Hoel, reachable via email at khoel@bellevuewa.gov or by phone at (425) 452-4378. The solicitation is posted on the City’s public procurement portal and is open to all eligible firms without specific set-aside provisions.

City of Bellevue

POSTED

about 13 hours ago

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified vendors to provide mechanical, electrical, and plumbing engineering services for school facilities, with a focus on designing HVAC, electrical, plumbing, fire alarm, and data systems that prioritize energy efficiency and full compliance with applicable building and safety codes. The scope requires integrated system design that supports sustainable operations and long-term operational reliability across multiple school sites under the jurisdiction of the Baldwin County Board of Education, though the specific locations are not detailed in the available data. All work must align with industry standards and be delivered in coordination with broader capital improvement efforts for public education infrastructure. The solicitation, categorized as a subcontract under NAICS code 541330 for architectural and engineering services, was posted on August 4, 2026, with a response deadline of September 4, 2026. The contracting authority is identified as the Baldwin County Board of Education operating under the state of Georgia, though exact office or performance address details are not provided. The contract is not subject to a specific set-aside classification, and interested parties must submit proposals through the official state procurement portal linked in the posting. Proposals must demonstrate technical expertise, past experience in educational facility design, and a clear plan for ensuring code adherence and energy performance targets.

Baldwin County Board of Education

POSTED

about 13 hours ago

DEADLINE

in about 1 month

More opportunities from Montana

Same awarding agency

Environmental and Erosion Control ComplianceThe contract entails the development and implementation of erosion and sediment control plans along with stormwater pollution prevention plans to ensure environmental compliance throughout construction activities. It requires ongoing monitoring and adherence to regulatory standards designed to minimize environmental impact from runoff, soil disturbance, and other construction-related pollutants. The work is scoped as a subcontract under NAICS code 541620, indicating environmental consulting services focused on compliance and remediation. The solicitation was posted on August 3, 2026, with a response deadline of August 24, 2026, and is issued by the State of Montana, though specific project location and point of contact details are not provided. The place of performance and agency office details remain unspecified, and no set-aside status is designated. Bidders must respond through the official state procurement portal linked in the solicitation, and the scope demands technical expertise in environmental planning and on-site compliance monitoring to support sustainable construction practices.

Environmental Consulting Services

POSTED

DEADLINE

Excavation and Trenching ServicesThe contract involves comprehensive excavation and trenching services required for the installation of underground piping, including all necessary shoring, backfilling, and soil compaction to ensure structural integrity and compliance with engineering standards. Spoil removal and final site grading are also included as part of the scope to restore the work area to its required condition after installation. The work must be performed in accordance with industry best practices and safety regulations, with all activities focused on the precise execution of subsurface infrastructure development. This is a subcontract under the NAICS code 238910, with a response deadline of August 24, 2026, and posted on August 3, 2026. The contracting entity is the State of Montana, though specific location details such as city, state, or zip code for the place of performance are not provided. Bidders must submit proposals through the designated online portal by the deadline, and all work is expected to adhere to state-mandated standards without additional set-aside requirements identified.

Site Preparation Contractors

POSTED

DEADLINE

Specialty Piping Materials SupplyThe contract seeks the supply of underground piping materials including HDPE, PVC, and steel pipe along with associated fittings, valves, and related components for use in infrastructure projects under the jurisdiction of Montana. The scope encompasses the provision of high-quality, code-compliant materials suitable for long-term underground installation, with an emphasis on reliability and durability under varied environmental conditions. The vendor is expected to support just-in-time delivery schedules and provide comprehensive logistics coordination to ensure timely and efficient material placement at project sites. The solicitation is structured as a subcontract and falls under NAICS code 423730, which corresponds to plumbing and heating equipment and supplies merchant wholesalers. Responses are due by August 24, 2026, with the opportunity posted on August 3, 2026. The place of performance and exact delivery locations are not specified in the data, indicating that work may be distributed across multiple sites within Montana. Interested parties must engage through the provided online portal to submit proposals, and the contract does not indicate any set-aside provisions for small businesses or other designated categories.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Underground Piping Removal and InstallationThe contract entails the complete removal and replacement of underground product piping, requiring full excavation, installation of new piping, proper jointing techniques, backfilling, compaction, and thorough site restoration to original conditions. The contractor is responsible for providing all labor, materials, equipment, and incidental costs necessary to complete the work in accordance with applicable standards and safety requirements. This is a subcontract under NAICS code 237120, specifically for underground construction services, and is being managed by the state of Montana with a response deadline of August 24, 2026. The place of performance and specific location details are not provided, but the work is expected to occur within Montana. Interested parties must submit proposals through the designated public bidding portal by the stated deadline.

Oil and Gas Pipeline and Related Structures Construction

POSTED

DEADLINE

Electric Lift Motor Products

Solicitation # StateOfMontana-MSU-SSJ-27-1

Montana State University is seeking qualified vendors to submit detailed descriptions of electric lift motor products that meet specific requirements under a sole source procurement, with no competitive bidding process being conducted. The solicitation, identified as StateOfMontana-MSU-SSJ-27-1, was posted on August 3, 2026, and responses must be submitted by August 17, 2026. Vendors who believe they can provide an equivalent product capable of fulfilling all stated needs are invited to engage through the eMACS Q&A Board to ask questions or seek clarification, with all inquiries required to be submitted by the specified deadline. The primary point of contact for this solicitation is Connor Markus, reachable via email at connor.markus@montana.edu. Although this is not a competitive request, vendors interested in participation must use the eMACS platform to respond and are advised to refer to the eMACS Vendor Handbook or contact the eMACS Help Desk for technical assistance regarding registration or system navigation. The contract will be awarded without competition if the sole source criteria are met, and performance is expected to be delivered to Montana State University.

Motor and Generator Manufacturing

POSTED

DEADLINE

Remove and Replace Underground Product Piping

Solicitation # StateOfMontana-MDT-316562-MS

The Montana Department of Transportation is soliciting bids to remove and replace underground product piping, requiring full provision of labor, materials, equipment, and all associated incidentals. The solicitation, identified as StateOfMontana-MDT-316562-MS, was posted on August 3, 2026, with a response deadline of August 24, 2026. All inquiries regarding specifications or requirements must be submitted through the eMACS Q&A Board, accessible only to registered users who have logged in to the system. General support for eMACS can be obtained by contacting the help desk at emacs@mt.gov or (406) 444-2575, while vendor registration and response guidance are available on the eMACS Resources website. The point of contact for this solicitation is Michele Smith, reachable at mishsmith@mt.gov. Bidders are required to certify and formally submit their responses through the eMACS platform and must ensure full compliance with all procedural and technical obligations outlined in the solicitation.

Oil and Gas Pipeline and Related Structures Construction

POSTED

DEADLINE

Annual Ongoing Maintenance and SupportThe contract seeks a vendor to provide comprehensive annual maintenance, monitoring, troubleshooting, and software updates for the integrated TPAIS system over a five-year term, ensuring continuous system uptime and reliable data integrity. The scope of work requires proactive service delivery to prevent disruptions, timely resolution of technical issues, and regular system enhancements to maintain operational efficiency and security standards throughout the contract period. This is a subcontract opportunity posted by the State of Montana under NAICS code 541512, with a response deadline of August 14, 2026, and a posting date of July 31, 2026. No set-aside designation or organizational type restrictions are specified, and the place of performance details are not provided. Interested parties must submit their proposals through the official bidding portal linked in the contract data.

Computer Systems Design Services

POSTED

DEADLINE

TPAIS System Build and IntegrationThe contract entails the design, development, and integration of the Truck Parking Availability Information System with Montana’s Road Management System and Advanced Traveler Information Systems to enable seamless, real-time data exchange and full system interoperability. The solution must deliver accurate, up-to-the-minute truck parking availability information to support freight mobility, reduce idle time, and improve operational efficiency for commercial vehicle operators across the state. Technical requirements emphasize secure, scalable architecture and strict compatibility with existing state transportation infrastructure to ensure reliability and consistency of data flow. The contract is classified as a subcontract under NAICS code 518210, with a published date of July 31, 2026, and a response deadline of August 14, 2026. While no solicitation number or set-aside details are provided, the place of performance and organizational specifics remain undefined, indicating flexibility in execution location. All work must align with Montana’s transportation objectives, and interested parties are directed to the official bidding portal for submission details and further requirements.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Truck Parking Availability Info System (TPAIS) Integration

Solicitation # MDT-SolSour-2027-2287

The Montana Department of Transportation is pursuing a sole-source procurement to integrate the Truck Parking Availability Information System (TPAIS) with its existing Roadway Management System and Advanced Traveler Information Systems, with Iteris identified as the sole qualified vendor due to proprietary control over the required 511 platform, mobile applications, and integrated infrastructure. This is not a competitive solicitation, and no formal Federal Acquisition Regulation clauses, evaluation factors, inspection criteria, or packaging requirements are specified. Vendors who believe they can provide an equivalent solution must submit a detailed written description of their product or service through the eMACS procurement system by August 7, 2026, using the designated Q&A board; failure to respond will result in direct award to Iteris. The integration work must be completed and accepted by August 2026, with final invoicing required by September 30, 2026, under Net 30 payment terms. The estimated contract value is $131,071, comprising a base cost of $21,871 for system build and integration and $23,040 annually for five years of maintenance. All communications, submissions, and clarifications must occur exclusively through eMACS, with no alternative methods accepted. The contracting officer is Michele Smith, and no Contracting Officer’s Representative or additional points of contact are named. No formal representations, certifications, SME requirements, or socioeconomic status disclosures are solicited or included, as the procurement hinges solely on technical exclusivity and system interoperability with Iteris-controlled assets.

Computer Systems Design Services

POSTED

DEADLINE

Annual Maintenance & Technical Support ServicesThe contract seeks a provider to deliver five years of ongoing maintenance, technical updates, security patching, and help desk support for systems operating within a PCI-compliant environment, with service level agreements mandating specific response times to ensure operational continuity and security. This includes proactive monitoring, timely resolution of incidents, and adherence to strict compliance standards to safeguard cardholder data throughout the contract term. All services must be performed under a subcontract arrangement, with the solicitation open until August 20, 2026, and issued under the NAICS code 541519 for other computer-related services. The contracting entity is the State of Montana, with performance expectations tied to federal compliance requirements and no specified geographic restriction for service delivery. Interested parties must respond through the provided online portal prior to the deadline to be considered for award.

Other Computer Related Services

POSTED

DEADLINE

System Implementation & Data Migration ServicesThe contract requires the implementation of a comprehensive bookstore system tailored to support academic operations with a focus on seamless integration and minimal disruption to institutional cycles. Key responsibilities include migrating existing data accurately and securely, configuring the system to meet institutional needs, conducting thorough staff training to ensure operational readiness, providing on-site support during the go-live phase, and offering post-launch optimization to refine performance and address emerging issues. The work must be executed with precision to maintain continuity in academic functions and avoid interference with enrollment, scheduling, or publishing timelines. The solicitation is classified as a subcontract under NAICS code 541512, reflecting its focus on custom computer programming and systems integration services. The opportunity was posted on July 30, 2026, with responses due by August 20, 2026, and is being managed by the state of Montana under its organizational structure. While specific location details and point of contact information are not provided, the work is expected to be performed in alignment with Montana’s institutional requirements, and all proposals must be submitted through the official online portal referenced in the posting.

Computer Systems Design Services

POSTED

DEADLINE

Bookstore Hardware Supply & ConfigurationThe contract titled Bookstore Hardware Supply & Configuration solicits the supply and configuration of education-grade point-of-sale hardware for use across campus bookstore operations. The required equipment includes workstations, barcode scanners, receipt printers, cash drawers, card readers, and self-service kiosks, all of which must meet strict compatibility standards with the campus’s existing IT infrastructure and security protocols. The hardware must be fully configured upon delivery to ensure seamless integration, minimal downtime, and consistent performance in an academic retail environment. All components are expected to be durable, reliable, and designed for high-volume daily use by students and staff. This is a subcontract opportunity with a NAICS code of 334112, targeting vendors capable of delivering and setting up integrated retail technology solutions. The solicitation was posted on July 30, 2026, and responses are due by August 20, 2026. The agency handling the procurement is the State of Montana, with no specific city or office address provided. While details about set-asides or point of contact are not included, interested parties can access further information through the provided online portal. Vendors must demonstrate experience with educational institutions and adherence to institutional cybersecurity and network compliance standards.

Computer Storage Device Manufacturing

POSTED

DEADLINE