This Sources Sought opportunity from Department Of Defense was posted on March 8, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Power Production Generator and Equipment Repair

Closed

Beale8March17Federal

Submission Closed03/24/2017, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and testing the PTO system under load to ensure the unit is safe for return to service. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms, under NAICS code 811310. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, proof of insurance, and any applicable SBA certification letters by November 3, 2026. The contract is subject to several federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31, FAR clauses regarding the utilization of small business concerns, and strict requirements for the protection of non-public information. Award will be based on best value as determined by MTC.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on November 1, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses via the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

LEKTRIEVERS and MOVABLE SHELVING UNITS MAINTENANCE SERVICE CONTRACT-BASE PLUS FOUR OPTION YEARS WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a maintenance service contract for Lektrievers and movable shelving units within the Desert Southwest Region. This requirement is designated as a small business set-aside under NAICS code 811310, with the primary place of performance located in Arizona. The contract structure consists of a base period followed by four option years. The current incumbent for these services is Business and Office System Services LLC. Interested parties can coordinate with the Small Business Program Managers for further details regarding this upcoming procurement opportunity.

Western Area Power Administration

POSTED

DEADLINE

EO 14398 WAPA SNR: Tracy Substation KT2A Transformer RefurbishmentThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the Tracy Substation KT2A Transformer Refurbishment project. This contract falls under NAICS code 811310 and is focused on the specialized refurbishment of transformer equipment. The procurement is listed with a posted date of November 1, 2026. Transfluid Services, Inc. is identified as the incumbent contractor for this work. Interested parties may coordinate with the Small Business Program Managers for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

PCB REFURBISHMENTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a PCB Refurbishment contract. This project is categorized under NAICS code 811310 and is designated as a small business set-aside. The work is expected to be performed in Colorado, with Bennett-Alvarado, Inc. listed as the incumbent contractor. The forecast was posted on November 1, 2026. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) requires a Contractor to replace the KY1A bushings at the Trinity Substation using government furnished bushings.The Western Area Power Administration Sierra Nevada Region is seeking a contractor to perform the replacement of KY1A bushings at the Trinity Substation located in California. This project involves the installation of bushings provided by the government. This opportunity is forecasted as a small business set-aside under NAICS code 811310. The contract is managed by the Department of Energy, with Springfield Solutions LLC listed as the incumbent contractor.

Western Area Power Administration

POSTED

DEADLINE

ANNUAL PREVENTATIVE MAINTENNCE FOR OVERHEAD DOORS AND ROLLING GATES ANNUAL (Base plus Four Option Years) WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a contract for annual preventative maintenance of overhead doors and rolling gates within the Desert Southwest Region. The project is structured as a base year with four additional option years and will be performed in Arizona. This opportunity is designated as a small business set-aside under NAICS code 811310. The incumbent contractor for these services is A.S.A.P. Door Repair & Service, Inc.

Western Area Power Administration

POSTED

DEADLINE

Corning KY3A Transformer Refurbishment for the Western Area Power AdministrationThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the refurbishment of the Corning KY3A Transformer. This project is designated as a small business set-aside under NAICS code 811310 and is scheduled for performance in California. The procurement process is managed by the Small Business Program Managers, with Springfield Solutions LLC identified as the incumbent contractor. Interested parties can find further details through the official Department of Energy acquisition forecast.

Western Area Power Administration

POSTED

DEADLINE

PHILIP O&M FIRE SYSTEM UPGRADE ELECTRICAL PORTION, EO 14398The Western Area Power Administration, under the Department of Energy, has issued a forecast for the Philip O&M Fire System Upgrade Electrical Portion, identified as EO 14398. This project focuses on electrical work associated with fire system upgrades and will be performed in South Dakota. The procurement is categorized under NAICS code 811310, and the current incumbent contractor for these services is API Group Life Safety USA LLC. The forecast was posted on November 1, 2026, and is listed as an other type of set-aside. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault and Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Asphalt Storage Tank Maintenance and Repair

Solicitation # 601320000072188

The Texas Department of Transportation issued Invitation for Bid 601320000072188 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes replacing gaskets, seals, and other components disturbed during cleaning, with a mandatory requirement to install a new manway gasket. The selected vendor is responsible for restoring tanks to proper operating condition, transporting and disposing of all waste materials off-site in compliance with Texas Health and Safety Code Chapter 361, and maintaining all required waste manifests. Final payment is contingent upon a successful inspection and acceptance by a TxDOT representative. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Bonfire procurement portal. Bidders must provide a comprehensive submission including a price schedule in Excel format, qualifications, personnel resumes, and a detailed approach to work. Award will be based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. To be considered, respondents must pass a documentation review and maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. Mandatory certifications include child support obligation disclosures and various state and federal eligibility affirmations.

Texas Department of Transportation

POSTED

DEADLINE

Process Field Instrumentation & GaugesThis subcontract for Process Field Instrumentation and Gauges involves the supply and installation of critical process instrumentation, gauges, and sensors for prime contractors working on Porter-Tower Joint Municipal Authority WWTP projects in Schuylkill County, Pennsylvania. The scope of work includes the installation of pitot tube flow sensors, flow gage assemblies, diaphragm seals on non-potable water gauges, and full body line size pressure sensors on sludge piping, with the ultimate goal of delivering a fully installed and calibrated instrumentation system. The opportunity is categorized under NAICS code 811310 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 5:00 PM.

POSTED

DEADLINE

Conveyance Maintenance Services

Solicitation # 26-1336

Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.

Chicago Public Schools

POSTED

2 days ago

DEADLINE

in 19 days

General Info

Agency

Department Of Defense → FA4686 9 Cons Pk

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

BEALE AFB, CA, 95903, USA

Set-Aside

NONE

Documents

sow

High

sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMar 8

Sources Sought

Response DeadlineMar 24

Deadline has passed

Submission Closed

03/24/2017, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4686 9 Cons Pk

Contacts1 person available

OfficeBEALE AFB, CA, 95903-1702, USA

Organization / AgencyDepartment Of Defense → FA4686 9 Cons Pk

Office AddressBEALE AFB, CA, 95903-1702, USA

Contacts

Keely WebbContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

SOURCES SOUGHT Power Production Generator and Equipment Repair Beale Air Force Base, California THIS IS A SOURCES SOUGHT SYNOPSIS ONLY. THIS IS NOT A SOLICITATION FOR PROPOSALS/QUOTES AND NO CONTRACT WILL BE AWARDED FROM THIS SOURCES SOUGHT. PLEASE DO NOT REQUEST A COPY OF A SOLICITATION, AS ONE DOES NOT EXIST. The 9th Contracting Squadron, Beale AFB, CA, is seeking information about qualified sources who can provide power production generator and equipment repair, in accordance with the attached Performance Work Statement (PWS). No reimbursement will be made for any costs associated with providing information to this Sources Sought or any follow-up information requests. The purpose of this synopsis is to notify the industry of the intent for a potential contract action and to gain knowledge of potentially qualified sources and their size classifications (small business, large business, service-disabled veteran, etc.) Proposed NAICS: 811310 PSC: S10 SIC: 7699 The small business size standard for this procurement, as defined by the U.S. Small Business Administration is $7.5M. Please provide any suggestions or requests if you feel a more appropriate NAICS exists. The proposed action is anticipated to be issued as a Blanket Purchase Agreement. Interested parties should submit a notice of ability to provide the requested and the requested information in the attached document labeled SOURCES SOUGHT Questionnaire NLT 1300 PST on Friday, 24 March 2017 to Ms. Keely Webb at contact@example.gov.